Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 250/1328 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Linux - real-world hardware RAID controller tuning (scsi and cciss)

  - by ewwhite

  Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

  Read the article

• BEAST (Browser Exploit Against SSL/TLS) Vulnerability on Port 25 for Postfix

  - by Abdul Haseeb

  I am failing a PCI Compliant scan. I have successfully used RC4 ciphers for Apache setup but my Postfix configuration is still not fixed. What TLS configuration should i use in my main.cf file. my current configuration is as follows # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes tls_preempt_cipherlist = yes smtpd_tls_protocols = !SSLv2 smtpd_tls_mandatory_protocols = !SSLv2, SSLv3 smtpd_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtp_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtpd_tls_security_level = encrypt

  Read the article

• Http to https behavior for visits from Internet Explorer client

  - by Emile

  My website has an SSL cert (example url: https://subdomain.example.com). Under Apache it's set up for both port 80 and port 443. So under the following configuration, anyone who goes to http://subdomain.example.com is sent to https://subdomain.example.com . But for visits from Internet Explorer, the redirect doesn't happen. Instead, http visits get a "Internet Explorer cannot display the web page." with a list of client-side solutions to try. Any ideas on how to fix the config so IE visits have the same behavior as the other browsers (that is, send http to https automatically)? NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com # SSL CERTS HERE </VirtualHost> *Tested IE8, IE9 beta

  Read the article

• How can I log all traffic with its exact length?

  - by Legate

  I want to process all packets with their size going through our gateway server (running Debian 4.0). My idea is to use tcpdump, but I have two questions. The command I'm currently thinking of is tcpdump -i iface -n -t -q. Is it guaranteed that tcpdump will process all packets? What happens if the CPU is working to full capacity? The format of the output lines is IP ddd.ddd.ddd.ddd.port > ddd.ddd.ddd.ddd.port: tcp 1260. What exactly is 1260? I have the suspicion that it is the payload in bytes of the packet, which would be exactly what I need, but I'm not sure. It might be the TCP Window Size. Or perhaps there is an even better way of doing this? I thought about a LOG rule in iptables, but tcpdump seems easier and I don't know whether iptables can log the packet lengths.

  Read the article

• Intermittent NFS lockups on Isilon cluster

  - by blackbox222

  We have an Isilon cluster with 8 IQ 12000x nodes which exports storage via several NFS shares for a handful of Linux and Solaris clients. There is a Linux system that has one of these NFS filesystems mounted. I/O to this filesystem is moderately heavy from the Linux system. Every 3-4 weeks (it's not on any kind of discernible schedule, and sometimes is more/less frequent than this), we notice that all activity ceases on this NFS mount (the process hangs, as if the network stopped working so process is stuck in uninterruptible sleep) - 30 minutes later, the share recovers and things continue to work normally. The kernel log from the affected machine is as follows: Dec 3 10:07:29 redacted kernel: [8710020.871993] nfs: server nfs-redacted not responding, still trying Dec 3 10:37:17 redacted kernel: [8711805.966130] nfs: server nfs-redacted OK relevant /etc/fstab line: nfs-redacted:/ifs/nfs/export_data/shared/...redacted... /data nfs defaults 0 0 I've checked to see if there are any scheduled processes e.g. cron jobs, Isilon related functions e.g. snapshots, etc that might be causing these hangups but I can't seem to find anything. I'm also not aware of any network related issues or maintenance that would cause this. All of the lockups last almost exactly 30 minutes per the kernel logs. Perhaps someone has some suggestions I could try? (I considered a soft mount to avoid the problems associated with processes accessing the filesystem hanging; however am wary of the corruption that could result and it would not really solve the underlying issue anyway).

  Read the article

• Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

  - by NickToyota

  Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

  Read the article

• iptables rule to submit packets matching a specific negative rule

  - by Aditya Sehgal

  I am using netfilter_queue to pick up certain packets from the kernel and do some processing on them. To, the netfilter queue, I need all packets from a particular source except UDP packets with src port 2152 & dst port 2152. I try to add the iptable rule as iptables -A OUTPUT ! s 192.168.0.3 ! -p udp ! --sport 2905 ! --dport 2905 -j NFQUEUE --queue-num 0 iptables throw up an error of Invalid Argument. Querying dmesg, I see the following error print ip_tables: udp match: only valid for protocol 17 I have tried the following variation with the same error thrown. iptables -A OUTPUT ! s 192.168.0.3 ! -p udp --sport 2905 --dport 2905 -j NFQUEUE --queue-num 0 Can you please advise on the correct usage of the iptables command for my case.

  Read the article

• Forwarding apache requests (port 80) to Tomcat (port 8080)?

  - by iftrue

  I want to run a Tomcat application through a regular website URL, such as www.xyz.com. I would like the root of this domain to act as the base directory for the web application, so each request to www.xyz.com/a/b/c becomes www.abc.com:8080/myApp/a/b/c. Ideally, I would be able to do this transparently and only for certain webapps. www.abc.com:8080 should still respond to requests. What do I need to do to make this happen?

  Read the article

• How do I configure additional phone lines asterisk/trixbox?

  - by Matt

  I have a 4 port Digium card in there, and have 4 lines running smoothly. Now, we added ANOTHER 4 port card and have 4 more analog lines coming into the Trixbox server. It still runs the 4 fine, but what do I need to do to add the additional 4 phone numbers/lines? I want it to act exactly as before, there's nothing special about the new lines. We just need more lines so that when we have 4 out of state customers call, we can have 4 more call and not get the busy signal. Trixbox CE 2.8

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• squid running out of sockets

  - by drscroogemcduck

  I have a setup where squid sits in front of a java server and acts as a reverse proxy. Recently i've load tested the site and if i fire 100 threads at it each making a request using jmeter i start getting errors in my load test tool like 'no route to host' even though the load test tool and the server are on the same machine. if i run the following command where port 82 is the port my squid server is running on: netstat -ann | grep 82 | wc -l i get 22000 or something and most of them are in TIMED_WAIT. i'm thinking that maybe the huge number of sockets in the TIMED_WAIT state are starving the box of resources.

  Read the article

• Jobs with anacron won't run

  - by mareser

  I would like to run two bash scripts daily using anacron in order to backup some data. Unfortunately I can't figure out why said scripts are not executed. For test purposes I let cron execute the scripts and it worked fine. cat /etc/anacrontab gives # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # These replace cron's entries 1 5 cron.daily nice run-parts --report /etc/cron.daily 7 10 cron.weekly nice run-parts --report /etc/cron.weekly @monthly 15 cron.monthly nice run-parts --report /etc/cron.monthly 1 5 TB_bak /bin/sh /home/vasco2/Dropbox/Scripts/backup_TB.sh 1 5 key_db_bak /bin/sh /home/vasco2/Dropbox/Scripts/bak_key_db.sh The output of ls ~/Dropbox/Scripts/ is backup_TB.sh bak_key_db.sh I use Linux Mint Katya. uname -a gives Linux vasco2 2.6.38-8-generic-pae #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 i686 i686 i386 GNU/Linux I would be very happy if somebody could point me in the right direction on why those scripts won't get executed. P.S.: There is no anacron tag on superuser.com. Maybe somebody wants to change that.

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• Added autossh in rc.local, but the dynamic port forwarding won't work

  - by rankjie

  I am using Rasbian on my newly arrived Rasp.Pi, and decided to make it my own proxy server. Now I need to set up a ssh tunnel on the Pi to my Linode server, and make it auto start with the system. What did I do: Add this line to /etc/rc.local autossh -f theRemoteServer -N -D 5555 -L 1234:localhost:22 After I reboot, I found out that I can't use the localhost:5555 as a socks proxy. So I type the command ps -A | grep ssh then I can see the autossh and ssh all running: pi@raspberrypi ~ $ ps -A | grep ssh 2018 ? 00:00:00 sshd 2116 ? 00:00:00 autossh 2119 ? 00:00:00 sshd 2195 ? 00:00:00 sshd 3173 ? 00:00:00 ssh (I've installed autossh, and the command works if I type it manually.) (I use the passwordless key auth, so I don't have to enter password.) Much appreciated and sorry for my poor English.

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

• How to do complex port forwarding (sort of)

  - by adnan kamili

  I have a very different situation. My laptop named A, another machine B(ip-172.16.28.3) with ssh server installed and i have an account on that machine, the third machine C(ip-172.16.24.3) is a proxy server. All the machines are within a LAN, but 1- Machine B can connect to A as well as C 2- Machine A i.e.my pc, it can only connect to B and not C Now to use internet, i do the following: ssh -X [email protected] Then i type firefox and i use the firefox of machine B with proxy setings as 172.16.24.3:3128 Instead of using firefox of B, i want to use my local firefox. Is there a way through which i can connect to C via B and use my local firefox for browsing

  Read the article

• Proxy server and ssl over non 443 port security risk

  - by Yaron Naveh

  Most http proxy servers do not allow to send ssl over non 443 ports. Why is this a security risk?

  Read the article

• SSH Interactive mode not working

  - by Ekin Koc

  I have a Debian based linux server running for a year or so, without any problems. A couple of days ago, ssh interactive mode stopped working for no reason. I mean, I can open an ssh connection just fine, the server greets me with shell but I just can't type anything. However, if I send commands like this: ssh [email protected] cat /var/log/messages, I get the response. I dug through several logs and found one message, which feels remotely relevant to the problem; sh kernel: [10222733.062511] ------------[ cut here ]------------ sh kernel: [10222733.062522] WARNING: at /build/buildd-linux-2.6_2.6.32-39-amd64-7yVIH2/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/char/tty_ldisc.c:738 tty_ldisc_reinit+0x46/0x7b() sh kernel: [10222733.062526] Hardware name: PowerEdge R210 II sh kernel: [10222733.062528] Modules linked in: ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables sha1_generic arc4 ecb ppp_mppe ppp_async crc_ccitt ppp_generic slhc loop snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core pcspkr evdev joydev dcdbas container button processor ext3 jbd mbcache sg sd_mod sr_mod crc_t10dif cdrom usb_storage usbhid hid mpt2sas ahci ehci_hcd libata scsi_transport_sas usbcore bnx2 nls_base scsi_mod fan thermal thermal_sys [last unloaded: scsi_wait_scan] sh kernel: [10222733.062568] Pid: 8662, comm: sshd Not tainted 2.6.32-5-amd64 #1 sh kernel: [10222733.062569] Call Trace: sh kernel: [10222733.062572] [<ffffffff811ff056>] ? tty_ldisc_reinit+0x46/0x7b sh kernel: [10222733.062574] [<ffffffff811ff056>] ? tty_ldisc_reinit+0x46/0x7b Is there any way to get back the sshd working in interactive mode? I tried restarting sshd but that is no help. And somehow, I can not reboot the server. Tried sending shutdown -r now and reboot but it refuses to go down. Should I go ahead and request a physical reboot?

  Read the article

• SSH stops at "using username" with IPTables in effect

  - by Rautamiekka

  We used UFW but couldn't make the Source Dedicated ports open, which was weird, so we purged UFW and switched to IPTables, using Webmin to configure. If the inbound chain is on DENY and SSH port open [judged from Webmin], PuTTY will say using username "root" and stops at that instead of asking for public key pw. Inbound chain on ACCEPT the pw is asked. This problem didn't happen with UFW. Picture of IPTables configuration in Webmin: http://s284544448.onlinehome.us/public/PlusLINE%20Dedicated%20Server,%20Webmin,%20IPTables,%200.jpgThe address is to the previous rautamiekka.org. iptables-save when on INPUT DENY: # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *mangle :PREROUTING ACCEPT [1430:156843] :INPUT ACCEPT [1430:156843] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1415:781598] :POSTROUTING ACCEPT [1415:781598] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *nat :PREROUTING ACCEPT [2:104] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1247:708906] -A INPUT -i lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT -A INPUT -p tcp -m comment --comment "Services - TCP" -m tcp -m multiport --dports 22,80,443,10000,20,21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m comment --comment "Minecraft - TCP" -m tcp --dport 25565 -j ACCEPT -A INPUT -p udp -m comment --comment "Minecraft - UDP" -m udp --dport 25565 -j ACCEPT -A INPUT -p tcp -m comment --comment "Source Dedicated - TCP" -m tcp --dport 27015 -j ACCEPT -A INPUT -p udp -m comment --comment "Source Dedicated - UDP" -m udp -m multiport --dports 4380,27000:27030 -j ACCEPT -A INPUT -p udp -m comment --comment "TS3 - UDP - main port" -m udp --dport 9987 -j ACCEPT -A INPUT -p tcp -m comment --comment "TS3 - TCP - ServerQuery" -m tcp --dport 10011 -j ACCEPT -A OUTPUT -o lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT COMMIT # Completed on Wed Apr 11 16:09:20 2012 iptables --list when on INPUT DENY: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ ACCEPT tcp -- anywhere anywhere /* Services - TCP */ tcp multiport dports ssh,www,https,webmin,ftp-data,ftp state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere /* Minecraft - TCP */ tcp dpt:25565 ACCEPT udp -- anywhere anywhere /* Minecraft - UDP */ udp dpt:25565 ACCEPT tcp -- anywhere anywhere /* Source Dedicated - TCP */ tcp dpt:27015 ACCEPT udp -- anywhere anywhere /* Source Dedicated - UDP */ udp multiport dports 4380,27000:27030 ACCEPT udp -- anywhere anywhere /* TS3 - UDP - main port */ udp dpt:9987 ACCEPT tcp -- anywhere anywhere /* TS3 - TCP - ServerQuery */ tcp dpt:10011 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ The UFW rules prior to purging on INPUT DENY: 127.0.0.1 ALLOW IN 127.0.0.1 3306 DENY IN Anywhere 20,21/tcp ALLOW IN Anywhere 22/tcp (OpenSSH) ALLOW IN Anywhere 80/tcp ALLOW IN Anywhere 443/tcp ALLOW IN Anywhere 989 ALLOW IN Anywhere 990 ALLOW IN Anywhere 8075/tcp ALLOW IN Anywhere 9987/udp ALLOW IN Anywhere 10000/tcp ALLOW IN Anywhere 10011/tcp ALLOW IN Anywhere 25565/tcp ALLOW IN Anywhere 27000:27030/tcp ALLOW IN Anywhere 4380/udp ALLOW IN Anywhere 27014:27050/tcp ALLOW IN Anywhere 30033/tcp ALLOW IN Anywhere

  Read the article

• How do I set up a virtual host?

  - by user1698332

  My router redirects port 80 to port 8080. This is my virtual hosts file: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /home/admins/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> I can access my website by entering "mywebsite.com:8080" but I cannot access it by entering "mywebsite.com" For further information, this is a part of my httpd.conf: Listen 8080 Servername localhost:8080 DocumentRoot "/home/admins/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/home/admins/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• virtual machines, dual booting and data disks on SSD

  - by stevemarvell

  This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

  Read the article

• What can cause kernel out_of_memory error?

  - by nbolton

  I'm running Debian GNU/Linux 5.0 and I'm experiencing intermittent out_of_memory errors coming from the kernel. The server stops responding to all but pings, and I have to reboot the server. # uname -a Linux xxx 2.6.18-164.9.1.el5xen #1 SMP Tue Dec 15 21:31:37 EST 2009 x86_64 GNU/Linux This seems to be the important bit from /var/log/messages Dec 28 20:16:25 slarti kernel: Call Trace: Dec 28 20:16:25 slarti kernel: [<ffffffff802bedff>] out_of_memory+0x8b/0x203 Dec 28 20:16:25 slarti kernel: [<ffffffff8020f825>] __alloc_pages+0x245/0x2ce Dec 28 20:16:25 slarti kernel: [<ffffffff8021377f>] __do_page_cache_readahead+0xc6/0x1ab Dec 28 20:16:25 slarti kernel: [<ffffffff80214015>] filemap_nopage+0x14c/0x360 Dec 28 20:16:25 slarti kernel: [<ffffffff80208ebc>] __handle_mm_fault+0x443/0x1337 Dec 28 20:16:25 slarti kernel: [<ffffffff8026766a>] do_page_fault+0xf7b/0x12e0 Dec 28 20:16:25 slarti kernel: [<ffffffff8026ef17>] monotonic_clock+0x35/0x7b Dec 28 20:16:25 slarti kernel: [<ffffffff80262da3>] thread_return+0x6c/0x113 Dec 28 20:16:25 slarti kernel: [<ffffffff8021afef>] remove_vma+0x4c/0x53 Dec 28 20:16:25 slarti kernel: [<ffffffff80264901>] _spin_lock_irqsave+0x9/0x14 Dec 28 20:16:25 slarti kernel: [<ffffffff8026082b>] error_exit+0x0/0x6e Full snippet here: http://pastebin.com/a7eWf7VZ I thought that perhaps the server was actually running out of memory (it has 1GB physical memory), but my Cacti memory graph looks OK to me... But strangely the load graph goes through the roof shortly before the kernel crashes: What logs can I look at for more info? Update: Maybe noteworthy - the CPU percentage and network traffic graphs were both normal at the time of the crash. The only abnormality was the average load graph.

  Read the article

• Why does a redirect from a local IP address assume localhost?

  - by Jeremy

  I am developing a web application on my desktop and it is running on port 80. I am able to access the application from my laptop connected to the LAN by entering my desktop's LAN IP address 192.168.1.8. Now, my application sends a redirect after login, but my laptop assumes the final address is localhost/login. If I manually type in the IP address and URI for any page, it shows that I am logged in, so it works as expected. So, why does the redirect assume localhost? Both of my machines are linux-based. The laptop being Chrome OS. I am running nginx which proxies non-static file requests to jetty on port 8080.

  Read the article

• saving and searching encrypted mail

  - by student

  I often send and receive gpg-encrypted mail. At the moment I use thunderbird + enigmail (in linux) to do that. As far as I know there is no way in thunderbird to find all encrypted messages which bodies contain particular keywords. There also seems to be no option to save encrypted mails decrypted (so they would be searchable). However for me it is important to be able to search old encrypted mails. So my question is: Is there a way in linux to save incoming mails automatically decrypted in my inbox and save outgoing encrypted mail decrypted in the send folder? Both times adding a line to the body which remarks that the mail was encrypted. It could be another email client for linux that could to that or perhaps a solution using procmail or maildrop. For a procmail solution I guess there could be some problems with encoding (perhaps one have to use emil?) the solution should work well with german special characters in subject and body. Note that the solution should work for multipart encrypted messages (including encrypted attachments) too i.e. with everything which could thunderbird + enigmail generate. Further note that I don't want a discussion about security holes. For me it's ok if messages are stored decrypted on my harddrive (which is encrypted as a whole anyway). In doubt for a first solution it would be ok to store my private key passphrase in cleartext on my harddrive, too. The point is that the mails are encrypted on the mailserver or more generally on their "way through the net".

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >