Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 252/328 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

  • Problems with Intel Video Resolution on Acer Laptop Wide Display

    - by ricstr
    I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

    Read the article

  • Help with the RT3290 Wireless adapter

    - by Potek
    I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

    Read the article

  • How do I install 10.04 on a Vortex86DX embdedded system?

    - by mathematician1975
    I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

    Read the article

  • Sound in Ubuntu 12.10 on Chromebook

    - by Paul Mennega
    I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

    Read the article

  • Help setting up wireless in Ubuntu 13.04

    - by James
    I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

    Read the article

  • Resolution stuck in 640x480 in grub, 11.04 and 12.04

    - by user89797
    I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

    Read the article

  • Wireless doesn't work after installing 11.10

    - by Ingram
    I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

    Read the article

  • Windows 7 and Ubuntu Boot/Corruption Problems

    - by Kiraisuki
    I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

    Read the article

  • Further question on Intel graphics driver

    - by Thomas Byers
    Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

    Read the article

  • Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

    - by Gaurav_Java
    I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

    Read the article

  • 11.10 liveCD black screen

    - by Shaun Killingbeck
    Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

    Read the article

  • Is there such thing as a "theory of system integration"?

    - by Jeff
    There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

    Read the article

  • Cannot enable Additional drivers for Broadcom in 12.10

    - by Compt
    tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

    Read the article

  • CUDA & MSI GT60 with Optimus enabled GTX670M?

    - by user1076693
    I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

    Read the article

  • How to improve Minecraft-esque voxel world performance?

    - by SomeXnaChump
    After playing Minecraft I marveled a bit at its large worlds but at the same time I found them extremely slow to navigate, even with a quad core and meaty graphics card. Now I assume Minecraft is fairly slow because: A) It's written in Java, and as most of the spatial partitioning and memory management activities happen in there, it would naturally be slower than a native C++ version. B) It doesn't partition its world very well. I could be wrong on both assumptions; however it got me thinking about the best way to manage large voxel worlds. As it is a true 3D world, where a block can exist in any part of the world, it is basically a big 3D array [x][y][z], where each block in the world has a type (i.e BlockType.Empty = 0, BlockType.Dirt = 1 etc.) Now, I am assuming to make this sort of world perform well you would need to: A) Use a tree of some variety (oct/kd/bsp) to split all the cubes out; it seems like an oct/kd would be the better option as you can just partition on a per cube level not a per triangle level. B) Use some algorithm to work out which blocks can currently be seen, as blocks closer to the user could obfuscate the blocks behind, making it pointless to render them. C) Keep the block object themselves lightweight, so it is quick to add and remove them from the trees. I guess there is no right answer to this, but I would be interested to see peoples' opinions on the subject. How would you improve performance in a large voxel-based world?

    Read the article

  • Freescale One Box Unboxing (then installing Java SE Embedded technology)

    - by hinkmond
    So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

    Read the article

  • How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

    - by shaggyjack
    Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

    Read the article

  • Now Available: Profit November 2012

    - by user462779
    The November 2012 issue of Profit is now available. In the five years I've worked on Profit, there has been measurable interest in content related to project management. Stories featuring project management as a key component have resulted in extra clicks, likes, and RTs (for you Twitter users) from our readers. I've chatted about this with Oracle customers, partners, and experts and received an assortment of ideas about why this might be. This issue of Profit is a bit of a culmination of those conversations, and the trends that are driving interest in project management best practices. Also, two online developments for Profit: check out my newly relaunched blog, Editor's Notebook, at blogs.oracle.com/profit, where readers can get a peek at the development of each issue of Profit as it happens. We've also launched a new LinkedIn group for our social media-inclined readers. In this issue: Three Keys to Project Management What can organizations with world-class project management teach the rest of us? Strong Medicine Gilead Sciences simplifies business processes to establish a foundation for continued growth. Architects of Reform Enterprise architecture plays an essential role in establishing Oregon as a leader in healthcare reform. Answering the Call Turkcell CIO Ilker Kuruoz finds IT-powered growth and innovation to be the calling card for success. Projected Results Sound project management practices and technology can have an immediate impact on the bottom line. Preparing for Impact Plans for dealing with enterprise information will define the big data winners. Is one issue of Profit not enough to get you through to February? Visit the Profit archives, or follow @OracleProfit on Twitter for a daily dose of enterprise technology news from Profit.

    Read the article

  • nvidia: switching dvi socket

    - by lurscher
    I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • How can I refresh/reinstall/clear/set-to-default my bootup process?

    - by Tchalvak
    I'm currently having a problem with my bootup process that is growing progressively worse as time goes on: While booting, it does a few minutes of hard-drive reading. During that, instead of showing a boot splash screen, it shows various dashes and dots, as if the video card isn't recognizing. The splash screen actually has colors similar to the splash screen (purple), it simply is garbled. It then does a few minutes of hard-drive reads, and if I leave it long enough, sometimes it boots into the desktop (and auto-logs-in). Sometimes, unfortunately, it just hangs on that garbled screen and reads from the hard-drive forever. Notably, I've also stopped being able to access grub during bootup (perhaps it is just not displayed correctly by the video, hard to tell). This is a symptom that has grown over the course of various ubuntu upgrades, at least I suspect that the upgrade process is leaving behind cruft. So, is there a safe way for me to "refresh" the boot system so that it is clean, new, fast, and reliable? For example, to test out a cleanly configured boot, make sure that it works (try before I buy), and then apply it to the system to eliminate as much of this problem as possible? Edit: Here is the requested bootchart: http://imgur.com/9jocF

    Read the article

  • Windows 7 Phone Developer Tools CTP download

    - by mbcrump
    For those that don’t know, you can download the W7 Phone developer tools now. It is available here. I have installed it and wanted to share my experience so far. You can read the pre-release documentation here. First, here is what it comes with the install: The Windows Phone Developer Tools CTP includes the following: Visual Studio 2010 Express for Windows Phone CTP Windows Phone Emulator CTP Silverlight for Windows Phone CTP XNA 4.0 Game Studio CTP First impressions: No ISO image install (Bad for me because I use multiple machine and have to install from a bootstrapper. Its around 228mb download. I already have the VS2010 RC, but it still makes me install the VS2010 Express Edition. Windows Phone Emulator will only work with VS2010. No support for 05/08. Need at least a DX10 graphics compatible card. Final Word: (you are probably going to need this info) To start a new project, go to Installed Templates and select Silverlight for Windows Phone and Windows Phone Application. Use Silverlight for WPF style applications or XNA for W7 Games.

    Read the article

  • Game: Age of Empires sound good but video "out of range"

    - by Ezekiel
    I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

    Read the article

  • How to help FGLRX detect a device

    - by user113416
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

    Read the article

  • Restart and/or graphics problem in Ubuntu 12.04

    - by kara
    I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

    Read the article

  • Microsoft Tag Tagged Me

    - by Brian Schroer
    I got EXTREMELY lucky last week and won an HP Mini 311 notebook from a Microsoft Tag Twitter contest. I did my required tweet to enter last Tuesday, and one hour later received notification that I had won the weekly drawing. Apparently you can tweet up to 500 times (I pity the followers of those who do that), so it was really lucky that I won, and I sympathize with those who had been really trying. If you would like to try your luck, there are seven weekly prizes left, and you can find out about the contest here: http://tag.microsoft.com/ttcontest.aspx For a free PC, I thought it was the least I could do to find out what Microsoft Tag is. I was vaguely aware of those pastel-y triangle-y square things that look like someone put one of Don Johnson’s Miami Vice outfits through a shredder, and knew that the company I work for (one of the world’s largest consumer products companies) was looking into putting them on our products, packaging and advertising, but didn’t know much more about the technology. I thought they were just an improvement over bar codes, and would be used in retail store scanners, but I was mistaken. These tags are meant to be scanned by consumers using their mobile phones, to get instant access to information, websites, reviews, etc. Scanning a tag can open a web page, import a contact card, or dial a phone number, play a video… Tag reader software can be installed on Windows Mobile, iPhone, Symbian, Blackberry, Android, J2ME, and other phones (and I suspect that it will be available for Windows Phone 7 also :). There are built-in tracking, metrics and analysis tools, to help companies using Tag make decisions about their marketing expenditures. (And they don’t have to look Miami Vice-y – They can be customized to reflect the personality of the person or a brand.) Looks like interesting stuff. You can find out more at http://tag.microsoft.com.

    Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >