Search Results

Search found 8543 results on 342 pages for 'documentation'.

Page 253/342 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• IIS Manager - Connect to Another Server (Win7 to Win2008 server)

  - by Matt

  I am running Windows 7 Ultimate. If I open up IIS Manager, I see a list of "connections" on the left hand side. In previous versions, I would be able to select an option to "connect to another server" or "connect to another machine", but there is no such option visible anywhere here. The only thing in the list is my local machine. Even in the address bar, if I manually type in the server location (\servername, even tried just servername), nothing happens (it just reverts back to my current local computer) The documentation at http://technet.microsoft.com/en-us/library/cc732466%28WS.10%29.aspx seems to imply the very same steps... but there is just no button or menu option anywhere to do this. Am I missing something? I'm not even seeing a grayed out menu option. EDIT: Under the "File" menu, I see 2 options: Save Connections (grayed out) Exit Under the "Connections" pane, I see 1 button, grayed out. When I hover the mouse, it simply says "Up", appears to be usable if I browse into an element in my local computers IIS settings If I right click inside the pane itself, I see Refresh Add website (to the current host) Start Stop Rename Switch to Content View UPDATE: I downloaded and installed the Remote Server Administration tools from http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en, and I enabled everything listed under "Remote Server Administration Tools" under "Turn Windows Features On or Off". Still nothing.

  Read the article

• Linux Tuning for High Traffic JBoss Server with LDAP Binds

  - by Levi Stanley

  I'm configuring a high traffic Linux server (RedHat) and running into a limit I haven't been able to track down. I need to be able to handle sustained 300 requests per second throughput using Nginx and JBoss. The point of this server is to run checks on a user's account when that user signs in. Each request goes through Nginx to JBoss (specifically Torquebox with JBoss A7 with a Sinatra app) and then makes an LDAP request to bind that user and retrieve several attributes. It is during the bind that these errors occur. I'm able to reproduce this going directly to JBoss, so that rules out Nginx at least. I get a variety of error messages, though oddly JBoss stopped writing to the log file recently. It used to report errors about creating native threads. Now I just see "java.net.SocketException: Connection reset" and "org.apache.http.conn.HttpHostConnectException: Connection to http://my.awesome.server:8080 refused" as responses in jmeter. To the best of my knowledge, I have plenty of available file handles, processes, sockets, and ports, yet the issue persists. Unfortunately, I have very little experience tuning servers. I've found a couple useful documents - Ipsysctl tutorial 1.0.4 and Linux Tuning - but those documents are a bit over my head (and just entering the the configuration described in Linux Tuning doesn't fix my issue. Here are the configuration changes I've tried (webproxy is the user that runs Nginx and JBoss): /etc/security/limits.conf webproxy soft nofile 65536 webproxy hard nofile 65536 webproxy soft nproc 65536 webproxy hard nproc 65536 root soft nofile 65536 root hard nofile 65536 root soft nproc 65536 root hard nofile 65536 First attempt /etc/sysctl.conf sysctl net.core.somaxconn = 8192 sysctl net.ipv4.ip_local_port_range = 32768 65535 sysctl net.ipv4.tcp_fin_timeout = 15 sysctl net.ipv4.tcp_keepalive_time = 1800 sysctl net.ipv4.tcp_keepalive_intvl = 35 sysctl net.ipv4.tcp_tw_recycle = 1 sysctl net.ipv4.tcp_tw_reuse = 1 Second attempt /etc/sysctl.conf net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.core.netdev_max_backlog = 30000 net.ipv4.tcp_congestion_control=htcp net.ipv4.tcp_mtu_probing=1 Any ideas what might be happening here? Or better yet, are there some good documentation resources designed for beginners?

  Read the article

• How do I import large sql file to local LAMP (xampp) environment

  - by mraslton

  I have used Linux to import a large mysql dump file (into a new database), but am new to how the process works in a local LAMP environment using xampp, as xampp does not support SSH. I've dowloaded the large_dump_file.sql from the Linux server to my local system. I'm using Windows XP and have used xampp to setup LAMP. I am able to access the local_database via phpMyAdmin, but the dump file is too large to import using that app. I'm trying to import the file via the command prompt, but so far with no success. At the prompt: cd .. cd .. cd xampp cd mysql cd bin I've found that mysqlimport is used to import .csv and .txt files, and mysql is used to import .sql files, but can't find documentation as to whether or not to use the -u -p options so I've tried many variations of the command with no luck. What would be the proper command? I've modified the hosts, virtual-hosts conf, and apache config files. Do I need to change any other config files on my local system? Thanks.

  Read the article

• Macs don't connect to wifi access point but PCs will

  - by Josh

  So, as a side project I'm going to try and figure out why the wifi APs in my building exhibit the following behavior: - They typically allow all types of computers to connect without issues - Sometimes Apples can't get an IP address but will still connect to the AP's signal - Less often, PCs can't connect to the wifi (same as above - yes signal, no IP addy) - Don't let Raiders fans on no matter the time of day! My first thought was that the DHCP leases were all taken up when the Apples would try to connect, and it was just their unlucky timing, but I would then try to log on with a PC that had a new, unleased MAC address and it would work... Could this be something to do with interoperability between an apple wifi card, and the APs? Different parts of the DHCP lease being taken up first? The fact that the Seattle Mariners might actually be good this year?? If this hasn't used up everyone's patience (with my crappy sports jokes), something else I could use some help with: - We don't have the model or type of AP - This is because there is no documentation available for them, and they literally look like small white boxes with no writing on them. Also, the company that installed them is out of business, so the situation might be that no docs will ever be on the way. -- Do you guys have any ideas on how to figure out what we have? Thanks as always for all the help, and I'm looking forward to the day when I know enough to start contributing back to the site, Josh

  Read the article

• Passive FTP Server Port Configuration Troubles Win2003

  - by Chris

  Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

  Read the article

• Geographically distributed file system with preferred locality

  - by dpb

  Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

  Read the article

• installing lots of perl modules

  - by Colin Pickard

  Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

  Read the article

• Webmin ADSL module

  - by expatcm

  I was wondering if the Webmin ADSL module is going to help me solve a problem .... but I cannot find any documentation telling me what the module does ..... Any ideas? What I am hoping is that it will solve a problem .... I am just in the process of setting up a Debian server. I will use the DHCP server as part of the Debian setup to manage the lan IP addresses. I want to turn off the external DHCP server which is part of the Linksys ADSL modem / router and use just the modem. The challenge I have is knowing what I need to do in order to get the public DNS on the eth1. When I turn off the DHCP on the modem / router not a lot happens apart from no longer being able to access the settings .......... So I am looking at this Webmin module and wondering if it is to manage the ADSL connection and find the public DNS address .... The local DHCP server is working well for the lan, I am just stuck for the external DNS.

  Read the article

• MySQL Error: FUNCTION LEVENSHTEIN already exists

  - by kgrote

  I've got an ExpressionEngine database and I exported a couple of tables from it, then dropped those tables. When I try to re-import the tables in PHPMyAdmin, I get this error: SQL query: -- -- Database: `my_db` -- DELIMITER $$ -- -- Functions -- CREATE DEFINER=`my_username`@`%` FUNCTION `LEVENSHTEIN`(s1 VARCHAR(255), s2 VARCHAR(255)) RETURNS int(11) DETERMINISTIC BEGIN DECLARE s1_len, s2_len, i, j, c, c_temp, cost INT; DECLARE s1_char CHAR; DECLARE cv0, cv1 VARBINARY(256); SET s1_len = CHAR_LENGTH(s1), s2_len = CHAR_LENGTH(s2), cv1 = 0x00, j = 1, i = 1, c = 0; IF s1 = s2 THEN RETURN 0; ELSEIF s1_len = 0 THEN RETURN s2_len; ELSEIF s2_len = 0 THEN RETURN s1_len; ELSE WHILE j <= s2_len DO SET cv1 = CONCAT(cv1, UNHEX(HEX(j))), j = j + 1; END WHILE; WHILE i <= s1_len DO SET s1_char = SUBSTRING(s1, i, 1), c = i, cv0 = UNHEX(HEX(i)), j = 1; WHILE j <= s2_len DO SET c = c + 1; IF s1_char = SUBSTRING(s2, j, 1) THEN SET cost = 0; ELSE SET cost = 1; END IF; SET c_temp = CONV(HEX(SUBSTRING(cv1, j, 1)), 16, 10) + cost; IF c > c_temp THEN SET c = [...] MySQL said: Documentation #1304 - FUNCTION LEVENSHTEIN already exists I get this error even if I drop all tables from the DB and try to import anything. The only way I can get the error to go away is to totally delete the database and re-create it. What's causing that error and how can I stop it from happening?

  Read the article

• nginx error page and internal directives not working as expected

  - by Romain

  I'd like to setup my nginx server to return a specific error page on HTTP 50x status codes, and I'd like this page to be unavailable by a direct request from users (e.g., http//mysite/internalerror). For that, I'm using nginx's internal directive, but I must be missing something, as when I put that directive on my /internalerror location, nginx returns a custom 404 error (which isn't even my own 404 error page) when a page crashes. So, to summarize, here's what seems to happen: GET /Home nginx passes the query to Python I'm simulating an application bug to get the 502 error code nginx tries to return /InternalError from its error_page rule because of the internal rule, it finally fails back to a custom 404 error code <-- why? the documentation says error_page directives are not concerned by internal: http://wiki.nginx.org/HttpCoreModule#internal Here's an extract from nginx.conf with a few comments to point things out: error_page 404 /NotFound; error_page 500 502 503 504 =500 /InternalError; # HTTP 500 Error page declaration location / { try_files /Maintenance.html $uri @pythonbackend; } location @pythonbackend { include uwsgi_params; uwsgi_pass unix:///tmp/uwsgi.sock; } location ~* \.(py|pyc)$ { # This internal location works OK and returns my own 404 error page internal; } location /__Maintenance.html { # This one also works fine internal; } location ~* /internalerror { # This one doesn't work and returns nginx's 404 error page when I trigger an error somewhere on my site internal; } Thanks very much for your help!!

  Read the article

• Interactive console based CSV editor

  - by Penguin Nurse

  Although spreadsheet applications for editing CSV files on the console used to be one of the earliest killer applications for personal computers, only few of them and even less documentation about them is still actively maintained. After having done extensive search on the web, manpages and source code, I ended up with the following three applications that all have fundamental drawbacks: sc: abbrev. for spreadsheet calculator; nice tool with vi keybings, but it does not put strings containing the delimiter into quotas when exporting to delimiter separated format and can't import csv files correctly, i.e. all numbers are interpreted as strings GNU oleo: doesn't seem to be actively maintained any longer since 2001 and there are therefore no packages for major linux distributions teapot: offers packages for various operating systems, but uses for example counter-intuitive naming for cells (numbers for row and column, i.e. 11 seems to be intended to be row 1, column 1) and superfluous code for FLTK GUI Various Emacs modes also do not quote strings containing the delimiter well or are require much more typing for entering the scaffold of a table. Therefore I would be very grateful for overcoming one of theses drawbacks or any hints towards another console based CSV editor. It actually needn't do any calculations just editing cells or column- and rowise.

  Read the article

• How to make ssh connection between servers using public-key authentication

  - by Rafael

  I am setting up a continuos integration(CI) server and a test web server. I would like that CI server would access web server with public key authentication. In the web server I have created an user and generated the keys sudo useradd -d /var/www/user -m user sudo passwd user sudo su user ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/var/www/user/.ssh/id_rsa): Created directory '/var/www/user/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /var/www/user/.ssh/id_rsa. Your public key has been saved in /var/www/user/.ssh/id_rsa.pub. However othe side, CI server copies the key to the host but still asks password ssh-copy-id -i ~/.ssh/id_rsa.pub user@webserver-address user@webserver-address's password: Now try logging into the machine, with "ssh 'user@webserver-address'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. I checked on the web server and the CI server public key has been copied to web server authorized_keys but when I connect, It asks password. ssh 'user@webserver-address' user@webserver-address's password: If I try use root user rather than my created user (both users are with copied public keys). It connects with the public key ssh 'root@webserver-address' Welcome to Ubuntu 11.04 (GNU/Linux 2.6.18-274.7.1.el5.028stab095.1 x86_64) * Documentation: https://help.ubuntu.com/ Last login: Wed Apr 11 10:21:13 2012 from ******* root@webserver-address:~#

  Read the article

• ntop to analyse bandwidth usage on multiple ASA 5505

  - by dunxd

  I have set up a netflow server at our data centre, which is connected via VPN to ~40 remote offices using Cisco ASA 5505. The aim is to analyse usage data and find out exactly how the remote connections are being used. I followed through http://techowto.files.wordpress.com/2008/09/ntop-guide.pdf to set up ntop and https://supportforums.cisco.com/docs/DOC-6114 to set up the ASAs. I can see from the Plugin Netflow Statistics page that netflow packets from my ASAs are being received - the counter is increasing. However, I am not seeing any breakdown on the Global Traffic Statistic page after switching to the Netflow interface. I'm just seeing a pie chart showing 100% traffic for eth0. The interfaces and documentation are a little hard to follow so I am not sure I have got things configured correctly. When setting up my NetFlow-device.2 I can specify Virtual NetFlow Interface Network Address - the web UI says This value is in the form of a network address and mask on the network where the actual NetFlow probe is located. is this a Network address (e.g. 192.168.0.0/24) or an actual host IP address (192.167.0.1/24)? If that should be a network address, is this the network in which one of my ASAs is or the network in which my ntop server is? If a host IP address, is this the IP address used by eth0 on my ntop server, the IP address of an ASA, or something else? Do I need a separate virtual interface for each ASA I am collecting netflow data from? Any guidance would be greatly welcome.

  Read the article

• Should I use Evernote or Org-mode for taking notes?

  - by tobeannounced

  I am looking for an app that will help me manage my notes, and after coming across Org-mode, I was wondering whether Org-mode's functionality is strong enough that it can remove the need for me to use another note taking app (because org is more of a task management app), such as Evernote. My wishes for a note taking app are: can be accessed offline in some form, eg through an iPhone app or desktop client Org-Mode and Evernote can both do this, however it seems like MobileOrg is more aimed at tasks, rather than notes? If this is the case, I probably would use Evernote in addition to MobileOrg. I can clip web content into easily for research Evernote has the browser extension, how is it with Org-Mode? I know I can use c-c c-l, but how suited is it really for taking notes on stuff I am browsing in Chrome/Firefox? has voice notes on the iPhone and computer too, if possible Org-Mode cannot do this on the iPhone, on the computer could I record audio externally and then link the files in? I can add notes too on my iPhone & computer while not connected to the internet both can do this. The types of notes I am likely to have include: howtos/things I have learnt, documentation on my setup/stuff, research on things I may do in the future, ideas, and task specific notes. I have thought about where I would want to access each of these notes and will post that here if you think it would help. So, is Org-mode strong enough in note-taking and the requirements I listed that I can avoid the need to use a separate tool for taking notes?

  Read the article

• How to get a new-pssession in PowerShell to talk to my ICS-connected laptop for Remoting

  - by Scott Bilas

  If I have my laptop on the LAN, then Powershell remoting works fine from my workstation to the laptop. However, the LAN is wireless, and so sometimes I will connect on a wire to my workstation. It has two ethernet ports so I have the secondary wired up to share to the laptop using Win7's Internet Connection Sharing. (Btw I know that avoiding ICS would solve the problem, but that's not an option right now.) So my question is: what magic registry bits or command line options do I need to flip to get remoting to work to my laptop through ICS? Here's what happens when I try it: new-pssession -computername 192.168.137.161 [192.168.137.161] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed I'm having a hard time understanding the documentation for PowerShell and WinRM. I've tried messing with allowing ports in the firewall and setting TrustedHosts to * on my workstation (don't think this is a good idea on the laptop). I have no idea where to go from here, would appreciate any help.

  Read the article

• Value of Itanium over x86_64 for Oracle Deployment

  - by Antitribu

  We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium hardware, are there any drawbacks? Is there a point where Itanium starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the two platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer.

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• Windows Error Reporting and IIS7 on Windows Server 2008

  - by graffic

  In a windows webservere I'm trying to get a memory dump of a failing IIS 7 worker process (w3wp.exe) with no avail. In the Event Viewer I get the following. Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb Faulting module name: clr.dll, version: 4.0.30319.1, time stamp: 0x4ba21eeb Exception code: 0xc00000fd Fault offset: 0x0000000000005c22 Faulting process id: 0x1cac Faulting application start time: 0x01cc23419da54772 Faulting application path: c:\windows\system32\inetsrv\w3wp.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: b54ec4f8-8fa4-11e0-ab62-005056810035 Even if I've configured LocalDumps for WER, and specifically for w3wp.exe in the registry. I get another event telling me that there is a report here: *C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cdb8af6deb381574fe9fb0dc9aa3edaad59acd5f_cab_4fbf9b53* It contains the following files: WERD931.tmp.appcompat.txt WERDFE9.tmp.WERInternalMetadata.xml WER99EF.tmp.WERDataCollectionFailure.txt The "depressing one" is the WERDataCollectionFailure that says: Heap dump generation failed: 0x8007012b Mini dump generation failed: 0x8007001f After many tries, lots of msdn documentation and many failed google search. I'm out of ideas on how to get a dump here. Does anyone have any suggestion on how to make WER work? Thank you in advance for your time reading this :)

  Read the article

• Using radvd to advertise ipv6 over VPN connection using DD-wrt

  - by Sean Madden

  My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

  Read the article

• Directory directive: AuthType None but still need an AuthProvider?

  - by Steffen Winkler

  For now I just need the server to let me download files from one specific folder (in my case I chose /opt/myFolder for that task) Distribution is Debian 6.0 *edit_start* Apache version is 2.4, according to their official documentation, the Order/Allow clauses are deprecated and should not be used anymore I'm an idiot: Apache version is 2.2. *edit_end* My directory directives in apache2.conf look like this: <IfModule dir_module> DirectoryIndex index.html index.htm index.php </IfModule> ServerRoot "/etc/apache2" DocumentRoot "/opt/myFolder" <Directory /> Options FollowSymLinks AuthType None AllowOverride None Require all denie </Directory> <Directory "/opt/myFolder/*"> Options FollowSymLinks MultiViews AllowOverride None AuthType None Require all allow </Directory> When I try to access a file inside that folder (http://myserver.de/aTestFile.zip) I get an Internal Server Error. Also Apache writes the following error into it's log: configuration error: couldn't check user. Check your authn provider!: /aTestFile.zip Why would I need an authn provider if I don't want any authentication? Also I hope someone can explain to me what kind of AuthenticationProvider I'd need for that. Everytime I search for those things I get pointed at people asking how to protect files/directories with passwords or restrict access to some IP addresses, which doesn't really help me. ok, since I've Apache version 2.2, here is the error I get when using the Order/Deny/Allow commands instead of AuthType/Require: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration.

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• Using Toshiba 22EL833 as PC display through HDMI input

  - by Oleg V. Volkov

  I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

  Read the article

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• Mouse receiver stopped working after pairing mouse to an unifying receiver

  - by mp19uy

  I bought this mouse, logitech m510, which came with a nano receiver (no-unifying). Yes I know, the mouse is supposed to come with a unifying receiver but I bought it knowing that it won't come on it's original package and it will come with a no-unifying receiver. When I received it, everything worked ok but, after connecting the mouse to another computer using an unifying receiver (that also worked ok, btw), then, when I tried to connect back the mouse to my computer using the no-unifying receiver, I couldn't connect it. I tried everything from removing the batteries and reinstalling the drivers to restarting the computer and trying in different computers, but I couldn't connect them. What I think it happened, is that in fact if you check the documentation of the logitech m510 it says that it works with unifying receivers only, and even more, there is the following article explaining it: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/18001/~/using-my-m510-with-a-different-usb-receiver So my theory is that the problem was connecting it to a unifying receiver, and now, isn't recognize by another receiver. The receiver (the no-unifying one) itself is recognized by windows, and if I connect the mouse using a unifying receiver, it works. I would like to know if there is any know solution for this or if I can try something else to see if I can solve this.

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >