Search Results

Search found 9105 results on 365 pages for 'disk quota'.

Page 254/365 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Adaptec 2020SA RAID controller Set up in RAID5, one drive went down, can I still get data?

  - by SJaguar13

  I have 6 1tb drives in a RAID5. 1 drive went down. On the RAID was 2 virtual machines that I really need back up and running. The spare drive I have to put in the server is a 1.5tb drive, which exceeds the physical per drive limit of the 2020SA. The drive is found in the disk utility, but it is not found in the array management section. I cannot add the drive to the array to have it rebuild. I have a replacement drive along with some spares on their way from Newegg, but I am still looking at a few days of downtime. Is it possible to use the 5 working drives to get the VMs copied off and on to another server or do I just have to wait for the drives to get here?

  Read the article

• Recommend a good DVD or BD replacement drive that can read older CD-R/DVD+R media?

  - by Irinotecan

  So I have a bunch of older CD-R (and a few DVD+R) discs that are either suffering from "bit rot", or a case of crappy no-name Chinese DVD drives being unable to read some or all of anymore. I just threw my last no-name DVD drive in the trash after it ejected a disk still spinning causing it to scratch to the point of being useless, so I'm looking for a replacement drive this time around with an eye for quality over a dirt cheap price. I'd prefer a BD drive, but I'll take any suggestions for good, reliable DVD or BD drives that people have reported having good success with for reading older burned media. Any takers?

  Read the article

• VMWare guest OS is not using full hard drive space

  - by syuusuke

  Hey everyone, I'm wondering if you can give me some insight on how to figure this out. I've recently virtualized a w2k3 server that had 10GB C:\ drive size. Once I finished virtualizing it, I expanded the disk to 20GB for C:\ and within guest OS (W2K3) computer management settings, you can see it recognizes as 20GB partition C:. But for some reason, if I opened windows explorer and see the properties of C:\, it will only show total size of 10GB. Does anyone know how to solve this or even had this problem before?

  Read the article

• Create a Windows 7 System Repair ISO?

  - by MaDMaD Mad

  According to the Microsoft website I can run "Create a system repair disc" from the start menu to burn a recovery Disc. However, there are many situations (including not having a disk drive) where this cannot be done. My goal is to create a bootable USB drive according to this guide but their method to do so without burning a physical disc includes downloading an ISO from "somebody's" website. I don't know who "somebody" is and I feel it is reasonable to not boot something I can't verify as being untampered with. To the best of my knowledge, Microsoft does not host a recovery disc ISO for download as this would be the easiest solution. So my problem is that I'd like to circumvent Microsofts "burn to disc" option with a "burn to ISO" through any reasonable means.

  Read the article

• How could I portably split large backup files over multiple discs?

  - by sourcejedi

  Context: I make backups / archives, primarily of photos. I'm experimenting with Bup, which is designed for backup to hard disk. Basically it creates Git repos which include packfiles of up to 1GB. But I still need last-ditch backups to keep offline and move offsite (and keeping them on read-only media is good too!). What are the options for archiving and splitting large files over several discs like CDs (and reading them back!)? I'd prefer methods which will stay readable in future. are portable e.g. to Windows. have known simple implementations, so I could re-implement them myself if necessary. (Using Bup packs will stretch my robustness budget. So I want to be confident about how other parts of the system would behave). I heard split archives are possible with both ZIP and 7-Zip. Is that right?

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

• Impossible to stop raid device

  - by Traroth

  I'm trying to stop a RAID disk in order to replace it by a new one, as this one is not working properly. I'm typing mdadm --stop /dev/md1, and I'm getting an error message: mdadm: fail to stop array /dev/md1: Device or resource busy I'm getting this message even if I reboot the server, and I can't see a process that could cause this. The server is working under a Debian with a 2.6.18-4-amd64 kernel. Could you help? Edit: Mote details about what my colleague tried out. After unmounting sda1, the command mdadm --remove /dev/md0 /dev/sda1 worked. But now, we still have an error message after mdadm --remove /dev/md1 /dev/sda5: mdadm: hot remove failed for /dev/sda5: Device or resource busy I still don't understand completly how the different partitions are mounted, so I suppose there is something I don't understand in the currenct situation...

  Read the article

• My WD passport detected but not shown on my computer

  - by Rakesh Patel

  1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• As a small business about to overhaul infrastructure and go virtual, how can we take advantage of all the features of the QNAP TS-439 Pro II+?

  - by Sally

  Specifically, how can we benefit from these current list of features? We're very new to this and I want to be able to talk intelligently to our IT consultant. VMware Ready Citrix Ready Built-in iSCSI target service Virtual Disk Drive (via iSCSI Initiator) Remote Replication Multi-LUN per Target LUN Mapping & LUN Masking Support SPC-3 Persistent Reservation Support What other products should we compare this QNAP to? I appreciate how informative the site is, but they only seem to sell their products through a small number of channels. Is QNAP well known? TIA!

  Read the article

• GNOME/KDE Linux entirely in RAM?

  - by František Žiacik

  Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• Clicks or ticks every minute when HDD is idle [closed]

  - by Ramy

  Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

  Read the article

• linux/shell: change a file's modify timestamp relatively?

  - by index

  My Canon camera produces files like IMG_1234.JPG and MVI_1234.AVI. It also timestamps those files. Unfortunately during a trip to another timezone several cameras were used, one of which did not have the correct time zone set - meta data mess.. Now I would like to correct this (not EXIF, the file's "modify" timestamp on disk). Proposed algorithm: 1 read file's modify date 2 add delta, i.e. hhmmss (preferred: change timezone) 3 write new timestamp Unless someone knows a tool or a combination of tools that do the trick directly, maybe one could simplify the calculation using epoch time (seconds since ..) and whip up a shell script. Any help appreciated!

  Read the article

• Folder cannot be deleted

  - by Aaron

  I am using Windows XP Home Edition. When I try to delete a folder I have named cygwin. When I try to delete it or any file or folder within it, there is a long pause, and then an error pops up, saying: Cannot delete Cygwin: Access is denied. Make sure the disk is not full or read-write protected and that the file is not currently in use. I have tried deleting the folder and the files it contains with FileAssassin, and unlocking it with LockHunter. Neither report any errors unless I try to have them delete the file or folder, then I get an error message saying Access Denied. I have rebooted into Safe Mode to change the ownership, but I get Access Denied when I click OK or Apply. How can I delete this folder?

  Read the article

• How to mount remote sambe from local host with multiple groups ?

  - by Dragos

  I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 `$ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has ? Is there a way to: 1) Mount the remote samba with multiple groups on the local system ? 2) Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. An the last solution would be nfs but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

  Read the article

• data recovery from unallocated harddisk partition

  - by user42151

  Hi I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• data recovery from unallocated harddisk partition

  - by user36007

  Hi, I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• data recovery from unallocated harddisk partition

  - by user36007

  Hi, I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• Resize ntfs system partitions with GParted?

  - by ane

  Trying to resize 2 ntfs system and boot partitions (windows 2003 server) using GParted. Goal: Resize D: (/dev/sda1) to ~850G - this is the boot drive with D:\ntldr, boot.ini, etc. Resize C: (/dev/sda5) to 100G - this is the system drive with C:\windows Tried resizing /dev/sda5 first and got the chkdsk error shown in screenshot #2. (You must run chkdsk /f). Have already run chkdsk /f on C: multiple times with no bad sectors or errors found. Have also run multiple chkdsk /f's on the underlying hard disk multiple times and rebooted way more than a couple times with the same error. How do you force gparted to ignore this error and resize? I found there is --force option to ntfsresize but don't know how to get the GParted ISO live CD to use it. How do you move the unallocated space so an extra ~750G is to the right of /dev/sda1 (D:), and an extra 10G to the right of /dev/sda5 (C:)

  Read the article

• How to use 3T SAS HDDs which aren't supported by Dell PERC 6i

  - by Sunry

  We bought several 3T SAS hard disks want to use with our Dell R710 server. But we found our R710 can't recognize the 3T hd, and then we dig out the raid card is PERC 6i which doesn't support it. Contacted with Dell that H700 and H800 support 3T hd, thought we can buy a H700 , but the SAS cable is not available in the market right now. And it seems very hard for us to change the raid card, also no suitable tools to tease the special screws. So I want to know if any other method to use these 3T hds instead of putting them in the warehouse? Can I low formatting it to 2TB, and plug it into Dell R710 to use? Or a SAS to USB adapter to use it as USB external disk? I just want to use them by Dell R710 even external.

  Read the article

• Reiserfs partition data recovery

  - by user991554

  i am having windows xp as my os. but i have raiserfs partions created by suse linux on same HDD. i need to recover data from the linux partitions now. i created opensuse live usb and booted from it. but it is showing free space in disk manager instead of linux partitions. but i accessed from one windows application(e.g Ext2Read ) which is showing linux partitions but not able to recover data from them as they are demo applications. why opensuse live usb os showing free space instead of linux partitions. Any other metyhod to recover data from them?

  Read the article

• Can you run Android 2.2 Froyo or 2.3 Gingerbread in a VM?

  - by Josh B

  I came across a how-to guide for running Android 1.7 in a virtual machine (VirtualBox), but 1.7 is old. I haven't been able to find a Android 2.2 or 2.3 image anywhere, does anyone have any ideas on how to virtualize newer Android OS's? Preferably a free virtualization solution like VirtualBox. Here is the link about virtualizing 1.7: http://osxdaily.com/2010/12/14/run-android-using-a-virtual-machine-on-a-mac-or-windows-pc/ They send you to here to download Android disk images: http://virtualboxes.org/images/android-x86/ But I can't find anything newer than 1.7, anyone have any ideas? Is this considered illegal or piracy is that why there are no images available? Thanks for help!

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >