Search Results

Search found 24933 results on 998 pages for 'arch linux'.

Page 256/998 | < Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• Server responses "bus error" to every command

  - by Temnovit

  I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

  Read the article

• Host hijacks USB printer from VirtualBox machine

  - by jackhab

  I have Ubuntu 9.1 running Windows XP in VirtualBox. Windows XP is a print server (there is no Linux driver for our printer). The printer is connected via USB and its USB filter is added to virtual machine settings. The problem is that every several hours Ubuntu tries to access the printer (trying to install it) and disconnects it from the virtual machine. The printer remains disconnected until I connect it again manually. I thought it is a problem with Windows power management but disabling sleep/standby in Windows didn't help. Please, advise.

  Read the article

• How can I fix an inconsistent NTFS file system without Windows?

  - by Demetri

  I have a Dell laptop that came with Windows from the factory. Since then, I have installed Linux and replaced the hard drive with an SSD. The NTFS partition is inconsistent (a result of bad sectors on the HDD) and needs to be fixed, but I cannot boot into Windows to run chkdsk. How do I fix this problem? Until I do, I cannot move my NTFS partition to expand space on my root filesystem, which is critically low. EDIT: All of my partitions were cloned from my dying HDD to my SSD via Clonezilla. There are no bad sectors on the SSD, but the NTFS partition is still in an inconsistent state.

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Restrict VPN Clients to VPN Server

  - by Sprotty

  I've setup a VPN server using Debians pptpd. This all works, but I want to restrict incoming connections so they can only access ports on the VPN server and not get access to other machines on the VPN servers local network. I'm guessing this is a firewall rule? but i'm new to linux so am struggling a bit... ---- Additional info ----- The VPN Server is also hosting an SVN server, which is its real purpose, and the only service I want it to expose to incoming connections. I guess I could expose the SVN server directly, but I'm not confident that I could secure this correctly, so a VPN seemed to give an additional layer of security.

  Read the article

• Testing php mail() in localhost problem.

  - by Samir Ghobril

  Hey guys, recently I just installed msmtp in linux and I even send a mail from the terminal and it worked: echo -e "Subject: Test Mail\r\n\r\nThis is a test mail" |msmtp --debug --from=default -t [email protected] But in php, after editing the php.ini file to have this: sendmail_path = '/usr/bin/msmtp -t' and using this piece of code: <?php if ( mail ( '[email protected]', 'Test mail from localhost', 'Working Fine.' ) ){ echo 'Mail sent'; } else{ echo 'Error. Please check error log.'; } ?> I get the Mail sent message but don't receive a message in my inbox. Not even in the spam folder. Anything wrong I'm doing?

  Read the article

• How to call a program and exit from the shell (the caller) when program is active?

  - by Jack

  I want to run a program with GUI, by typing into konsole: foo args … and exit from the shell (that's the caller) when the program (foo) is active. How do I this? Is there a Linux/Unix built-in command/program to do it? I'm not a shell-man, really. I know that it's possible by writing a small program in C or C++ (any other programming language with small I/O interface on POSIX) programming language with the fork() and one-of exec*() function family. It may take some time; I'll do it only if there is no native solution. Sorry for my bad English; it's not my native language. Also, not sure on tags, please edit for me, if I'm wrong. If it matters, I'm using OpenSUSE 10.x.

  Read the article

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• Meaning of Bridge-Check in iptables flowchart

  - by networkIT

  In the famous iptables flow-chart what does bridge-check exactly stands for ? I couldn't find any documentation. The only clue I found was while scanning the MikroTik RouterOS documentation ( RouterOS is build upon a Linux 2.6.16 kernel ), I found this : In-interface Bridge = Checks if the input interface is a port for a bridge or is the bridge. Manual:Packet Flow Comparing both flow-charts brings clues that iptables Bridge-check might equal MikroTik In-Interface Bridge. Is this true ? Else, what might be the meaning of iptables Bridge-Check ?

  Read the article

• information about /proc/pid/sched

  - by redeye

  Not sure this is the right place for this question, but here goes: I'm trying to make some sense of the /proc/pid/sched and /proc/pid/task/tid/sched files for a highly threaded server process, however I was not able to find a good explanation of how to interpret this file ( just a few bits here: http://knol.google.com/k/linux-performance-tuning-and-measurement# ) . I assume this entry in procfs is related to newer versions of the kernel that run with the CFS scheduler? CentOS distro running on a 2.6.24.7-149.el5rt kernel version with preempt rt patch. Any thoughts?

  Read the article

• "Installing" GD for PHP

  - by gbuckingham89

  I'm new to server admin & Linux and have just got a VPS running CentOS 6. Apache, MySQL and PHP all came installed (along with cPanel and WHM), however I'm now also trying to install the GD library. I've run "yum install php-gd" and it installed ok. If I run it again I get "Package php-gd-5.3.2-6.el6_0.1.x86_64 already installed and latest version". However, when I do a phpinfo() or from the command line "php -m" there is no mention of GD. Is there anything else I need to do?

  Read the article

• ARP replies contain wrong MAC address

  - by Jayen

  I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• The cache is getting at full level so fast

  - by CompilingCyborg

  Please, the memory and the cache are getting to the full level quite quickly under my linux mint 9 - isadora system. I used Ubuntu and Debian before, and it was not causing this issue at all. At the current time i typing the following command frequently to empty the cache "echo 3 /proc/sys/vm/drop_caches". Please any way around this? or do you know what's going wrong? | I am only programming on this machine; no graphics, no games nothing. Thanks in advance for your help!

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• Visual annotator for large images

  - by pts

  I have a few hundred images of 30000 x 10000 pixels in size. Each image has lots of text (rendered as pixels) on it. I'd like to translate all text to another language. I speak both languages, and it's fine for me to translate each phrase manually. I need an image editor which can open these images quickly (faster than Inkscape, which needs about 60 seconds to open such an image), lets me zoom and rotate by 90 degrees, lets me erase (i.e. change the color of a selected rectangle to solid white), lets me add text, and lets me save the file as quickly as possible. I'd like to minimize the time I have to wait for the software to load, render and save images. Which is the best program for that on Windows? On Linux?

  Read the article

• JFFS2 poor mount performance

  - by Marcin Polkowski

  I run multiple ARM boards with Debian Linux installed. Board is equipped with 512 MB of NAND memory. I've observed that after ~3 months of continuous run booting time increased significantly - it takes over 3 minutes to mount filesystem (JFFS2). System was using about 35% of available storage so I’ve removed unnecessary files (got to ~18%) but this didn't change anything. Then I realized that my software produces directories that are left empty so I’ve removed ~500 empty and unnecessary dirs. This didn’t help either. After system is started I see JFFS2 garbage collector (jffs2_gcd_mtd4) running and occupying over 90% of CPU. Now my question: is there a way to „optimize” JFFS2 filesystem for better performance - faster booting (my system have limited timid to boot up)? It would be great if this optimization could be done remotely - I have no physical access to boards.

  Read the article

• Tool to make screenshot-based "screencast"

  - by liori

  Hello, I'd like to make a simple animation: some screenshots with added text. Something like screencast, but simpler, no audio... and hopefully very quick to produce--this is my main requirement. Googling for "screencasts" gives me full-blown tools to record video and audio, and I don't need them. I can make screenshots manually, then add text in GIMP... but maybe there is something easier, quicker? Very preferably something that works on Linux.

  Read the article

• Build of expect v5.43 fails with Tcl v8.5.8

  - by E Brown

  Hi, I'm trying to build "expect" from source v5.43, using Tcl built from source v8.5.8 on Redhat Linux. Tcl built fine, but my attempt to build expect fails. I run configure, then make, which gives me the error: `TCL_REG_BOSONLY' undeclared when compiling exp_inter.c. I did some digging around, and found the TCL_REG_BOSONLY value defined in Tcl file tclInt.h, but there is no #include for that in the exp_inter.c file. My question is, can "expect" be built from source with Tcl version 8.5.8, or does it require an earlier version? Version 5.43 is the latest for "expect" that I can find, and the current Tcl version is 8.5.8, but something doesn't seem compatible between the two. Any help appreciated.

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• Diff -b and -w difference

  - by dotancohen

  From the diff manpage: -b, --ignore-space-change ignore changes in the amount of white space -w, --ignore-all-space ignore all white space From this, I infer that the difference between the -b and -w options must be that -b is sensitive to the type of whitespace (tabs vs. spaces). However, that does not seem to be the case: $ diff 1.txt 2.txt 1,3c1,3 < Four spaces, changed to one tab < Eight Spaces, changed to two tabs < Four spaces, changed to two spaces --- > Four spaces, changed to one tab > Eight Spaces, changed to two tabs > Four spaces, changed to two spaces $ diff -b 1.txt 2.txt $ diff -w 1.txt 2.txt $ So, what is the difference between the -b and -w options? Tested with diffutils 3.2 on Kubuntu Linux 13.04.

  Read the article

• Avoiding users to corrupt and use a script

  - by EverythingRightPlace

  Is it possible to deny the right to copy files? I have a script which should be executable by others. They are also allowed to read the file (though it would not be a problem to forbid reading). But I don't want the script to be changed and executed. It's not a problem to set those permissions, but one could easily copy, change and run the script. Can this even be avoided? /edit The OS is Red Hat Enterprise Linux Workstation release 6.2 (Santiago).

  Read the article

• Updating autoreconf

  - by AzaraT

  So I need to use the autoreconf to configure a package. However I need at least version 2.61. I'm on CentOS 5.8 and it seems like there's no package for it so I went on to compile it myself. So I get the source of autoconf from http://www.gnu.org/software/autoconf/ and compiled that. And sure when I do autoconf -V it shows up as version 2.68 which is indeed the latest version. However autoreconf (nothing the re) still shows up as the old version 2.59 which causes me some problems. So could someone help a relatively new linux user, updating autoreconf properly? Thanks

  Read the article

• FTP Error 550 when trying to access a folder via symbolic link

  - by OrangeTux

  I'm configuring svftp on a linux machine. At the moment local users can login via ftp and they will see listened their home dir. They have write acces to it. No I want the users to write in de /var/www/ dir. Therefore I created an new group apache. Added users to the group and gave the group write access to /var/www. Via the terminal all users can write .var/www/. I created a link in the home directory to /var/www via ln -s /var/www/ /home/user/www ls gives: drwxr-xr-x 2 orangetux orangetux 4096 Jun 23 15:06 ftp lrwxrwxrwx 1 orangetux orangetux 21 Jun 23 15:00 www -> /var/www/ But when I use FTP I see the link but I cannot follow it. Error 550 which means file not found or bad access. How can I solve this, so that the users have access to /var/www via their home dir?

  Read the article

< Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >