Search Results

Search found 9128 results on 366 pages for 'hardware infrastructure'.

Page 258/366 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

• RAID 1 in ubuntu 12.04

  - by Bavly Hanna

  Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

  Read the article

• Removing DVI connectors stuck in video card ports

  - by thecyclegeek

  I need some help removing a couple of DVI connectors which are stuck in my video card ports. I don't know why they were screwed in so tightly in the first place but they won't move. I need to replace hardware in the machine, but doing so with the cables connected and the box in its current position is nearly impossible. I've tried pliers with grips to loosen the screws holding the cable, and I've tried a screwdriver, the latter ended up breaking off the plastic. Neither worked. I'm at a loss as to what to do and I'm very frustrated. Can I get some suggestions?

  Read the article

• Debian - no sound output

  - by Gogeta70

  So I've been trying for the last few days to get sound output on my Linux desktop. The onboard audio is Intel HD Audio ICH9, but I couldn't get Alsa to even detect it, so I disabled it in BIOS and installed a PCI card - a Dynex DX-SC51. Searching around, I found that it needed the Alsa driver for ice1724, so I installed all the stuff for that. Now, the system detects my sound card, but I can't get any audio to play out of it. Here's some information: root@debian:~# lspci | grep audio 02:01.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) root@debian:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 I've been trying various solutions found on Google for a few days now and I'm getting nowhere. Hopefully someone here can point me in the right direction. Thanks.

  Read the article

• Getting the keyboard working on a MacBook under Windows XP x64

  - by Theran

  Despite Windows XP Professional x64's unsupported status on MacBooks (model A1181), I've managed to get most of the hardware working by manually installing either the drivers on the OS X Snow Leopard CD, or finding the appropriate drivers online. However, even after installing the Apple keyboard driver from the CD, I can't get Windows to actually use the special driver. Instead, the keyboard just shows up as a generic USB keyboard, with non-functioning Fn and other special keys. Being unable to generate a right-click or Ctrl-Alt-Del makes Windows a bit of a challenge to use. I've tried: uninstalling and reinstalling the keyboard driver removing the keyboard under device manager and letting Windows re-detect it using device manager to manually update the driver How do I get the special functions of the MacBook keyboard working under XP x64?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• Monitors blank after restart [closed]

  - by offler

  i need help on the following issue. We have Dell T1650 PCs with 2 nvidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Multiple Monitors on One Screen

  - by Hulihan Applications

  Does anyone know of any software/hardware configuration that will allow you to preview/view the contents multiple monitors on one monitor? Let's pretend: I have two monitors hooked up to one pc, Monitor A and Monitor B. The monitors are not near each other. I'd like to be able to preview/see what's displaying on Monitor B on Monitor A I haven't been able to find much about this, but I imagine it may not currently be possible to access/emulate video output going out of a video port in software. However, wouldn't it be possible to capture display data generated by the OS kernel or data getting passed down to the display adapter driver?

  Read the article

• What kind of website traffic can a 10mpbs connection handle?

  - by Blankman

  I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• IntelliPoint & Intellitype upgrade to Mouse and Keyboard Center causing system freeze?

  - by Kent England

  I allowed Microsoft to upgrade my wireless keyboard 6000 v3.0 and mouse 6000 v2.0 from Intelliyada v 8.20.468 to what appears to be v9.1.486. This was some time ago, so I can't be certain but this upgrade might be causing my system to freeze on the logon screen (user selection) in Windows 7 Home Premium 32-bit. Mouse and keyboard don't work, but system seems to be running underneath. No indication in Event Viewer about keyboard/mouse driver issues. Might be problem with transceiver hardware. I now have the "Microsoft Mouse and Keyboard Center" UI which isn't very helpful (seems to be very metro) in debugging these drivers. I'm just looking to see if anyone else had problems upgrading to this new Intelliyada software for their MS keyboard and rodent.

  Read the article

• Windows 7 very slow after restart, but fine after complete shutdown?

  - by lkm

  I have a Dell pc running Windows 7 with the Intel i3 processor. Whenever I restart the computer, the os crawls. For example, I move the mouse and then I see it move on the screen 10 seconds later... Everything runs slowly. This happens only on a restart (it's fine when I turn it on after it has been shut down). Any ideas what is causing this (I haven't installed any new software since buying it). Does it sound like a hardware or software issue?

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

  - by Vortico

  Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

  Read the article

• What is the best appliance you've used?

  - by phuzion

  Post your favorite appliances or "all-in-one" programs. Whether it runs in a virtual machine, or on its own hardware, it all goes. My submission is Untangle. It's an open source network gateway (their term). Essentially, it can run a plethora of things that you may otherwise end up buying another appliance for: Web filtering logging mail spam filtering phishing monitor spyware blocking VPN You name it, it's all there. Best of all, it's mostly free. A few appliances have annual costs due to inherent licensing or subscription costs. If you are looking for a new network perimeter device, definitely check it out. The underlying OS doesn't matter, because it's the application we want to praise, not the OS beneath it.

  Read the article

• SNMP - So I have a MIB. Now What?

  - by senfo

  I can't seem to get my head wrapped around the purpose of a MIB. I have a collection of ~20 MIB files that were supplied to me by the vendor, but what do I do with them? I also have a few OID's that were supplied by the vendor that don't seem to be valid. When I issue an "snmpget -v1 -c public 192.168.0.123 .1.4.6.3.2.6.2" (assume that's a valid OID), I get an error indicating the variable is unknown. Does this sound like a hardware configuration problem? Do I need to "load" (for lack of better words) the MIB into the device? Unfortunately, the vendor has been completely unresponsive with returning emails to my questions, so any help would be greatly appreciated.

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

• upgrading servers, need to keep domain same as before. what are the best practices?

  - by nLL

  Hi, I am upgrading a domain controller/file server from win2003 standard to win2008 r2 standard. We are planing to have a file server and an AD controller. Our old hardware will be scrapped, we want to copy all AD users/computers to new machine and keep current domain name. I never done this before. What are the best practices? Is it better if we get a contractor to do it for us? I guess best way to start is to build new servers, copy data, take old server down and put new server online. My gut says we would need to re-join all computers. Is that correct? Any input appreciated.

  Read the article

• "Undeleting" partition (NTFS) - recommendations?

  - by kagali-san

  So I have a drive which either suffered from hardware error or, possibly, got a little shock from badly configured Windows unattended install started on the same PC (the drive in question wasn't the install drive..). Quick exam shows that filesystem is seemingly intact, as some data recovery tools work with it (UnFormat rated it as "Excellent"). This may mean that a copy of partition table exists on disk, or a copy of MFT survived whatever happened, or.. Any idea how to restore partition tables/FS header, add a drive letter thus let Windows to mount the filesystem as if nothing happened? (I guess there must be tools of this kind)

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Why do I have to enter my password every time I activate / deactivate AirPort (WiFi) on my MacBook P

  - by Another Registered User

  I use Snow Leopard, and I'm used to activate / deactivate WiFi like 20 times per day. The reason is that WiFi stops working properly after a few minutes of use. So every time I try to surf, I must stop/reactivate it first. But now, suddenly I have to enter my user password every time I want to do it. It's so annoying! The dialogue details say: Right: com.apple.airport.power Program: SystemUIServer What can I do that the Mac won't ask me for the password every time? It's hard enough that I have to stop/reactivate WiFi all the time (hardware bug). I have a admin account with full rights.

  Read the article

• how to design LAN connectivity between private and corporate ?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services). how can these hosts be accessed from outside of this privateLAN? Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software?

  Read the article

• RAID strategy - 8 1TB drives

  - by alex

  I'm setting up a backup storage device- This machine has Windows Server 2008, on a separate boot drive. It has 8x 1TB drives, and uses a hardware RAID card. My question is, which RAID configuration should I go for? Initially, I was going to go with RAID 5 across all 8 drives, however members on serverFault have advised against it. I was just wondering why? Some people have suggested 2 lots of RAID 5 configuration on 4 of the drives, then striping them... I want to maximise the storage space, as this is a backup unit - will store SQL backups, Acronis Images, files, etc... It won't be for public access, so the I/O won't be that high I wouldn't think.

  Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >