Search Results

Search found 29567 results on 1183 pages for 'network tools'.

Page 258/1183 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

• How do I turn a Wi-Fi "hotspot" into a local wired network?

  - by Max Schmeling

  Here's the situation: In a remote "office" I have a computer with no network connection, that I need to network with when I'm at this remote office. There is a wireless network where this computer is, but no wireless adapter in the computer. I have a laptop running Windows 7 that can connect to the wireless, and the computer is running Windows Vista. What is the best way to get them both connected? I know I can buy a USB wireless adapter or something for the computer, but is there an easy way to do it with what I've got?

  Read the article

• OSI Model

  - by kaleidoscope

  The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

  Read the article

• Proactive Support Sessions at OUG London and OUG Ireland

  - by THE

  .conf td { width: 350px; border: 1px solid black; background-color: #ffcccc; } table { border: 1px solid black; } tr { border: 0px solid black; } td { border: 1px solid black; padding: 5px; } Oracle Proactive Support Technology is proud to announce that two members of its team will be speaking at the UK and Ireland User Group Conferences this year. Maurice and Greg plan to run the following sessions (may be subject to change): Maurice Bauhahn OUG Ireland BI & EPM and Technology Joint SIG Meeting 20 November 2012 BI&EPM SIG event in Ireland (09:00-17:00) and OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 Profit from Oracle Diagnostic Tools Embedded in EPM Oracle bundles in many of its software suites valuable toolsets to collect logs and settings, slice/dice error messages, track performance, and trace activities across services. Become familiar with several enterprise-level diagnostic tools embedded in Enterprise Performance Management (Enterprise Manager Fusion Middleware Control, Remote Diagnostic Agent, Dynamic Monitoring Service, and Oracle Diagnostic Framework). Expedite resolution of Service Requests as you learn to upload output from these tools to My Oracle Support. Who will benefit from attending the session? Geeks will find this most beneficial, but anyone who raises Oracle technical service requests will learn valuable pointers that may speed resolution. The focus is on the EPM stack, but this session will benefit almost everyone who needs to drill deeper into Oracle software environments. What will delegates learn from the session? Delegates who participate in this session will learn: How to access and run Remote Diagnostic Agent, Enterprise Manager Fusion Middleware Control, Dynamic Monitoring Service, and Oracle Diagnostic Framework. How to exploit the strengths of each tool. How to pass the outputs to My Oracle Support. How to restrict exposure of sensitive information. OUG Ireland BI & EPM and Technology Joint SIG Meeting 20 November 2012 BI&EPM SIG event in Ireland (09:00-17:00) and OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 Using EPM-Specific Troubleshooting Tools EPM developers have created a number of EPM-specific tools to collect logs and configuration files, centralize configuration information, and validate a configured installation (Ziplogs, EPM Registry Editor, [Deployment Report, Registry Cleanup Utility, Reset Configuration Tool, EPMSYS Hostname Check] and Validate [EPM System Diagnostic]). Learn how to use these tools on your own or to expedite Service Request resolution. Who will benefit from attending the session? Anyone who monitors Oracle EPM environments or raises service requests will learn valuable lessons that could speed resolution of those requests. Anyone from novices to experts will benefit from this review of custom troubleshooting EPM tools. What will delegates learn from the session? Learn where to locate and start EPM troubleshooting tools created by EPM developers Learn how to collect and upload outputs of EPM troubleshooting tools. Adapt to history of changes in these tools across time and version. Learn how to make critical changes in configurations. Grzegorz Reizer OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 EPM 11.1.2.2: Detailed overview of new features and improvements in Financial Management products. This presentation is a detailed overview of new features and improvements introduced in Enterprise Performance Management 11.1.2.2 for Financial Management products (Hyperion Financial Managment, Hyperion Planning, Financial Close Management). The presentation will cover a number of new product features from recently introduced configurable dimensionality in HFM to new functionality enhancements in Planning. We'll close the session with an overview of upgrade options from earlier product releases.

  Read the article

• collectd does not work

  - by bery

  I have installed collectd-5.0.0 on Fedora12 server and would like to run its service for receiving data from clients. I have enabled network plugin and rddtool plugin as commented: collectd.conf in server: BaseDir "/opt/collectd/var/lib/collectd" LoadPlugin "logfile" LoadPlugin network LoadPlugin rrdtool <Plugin network> Listen "192.168.8.37" "25826" </Plugin> collectd.conf in client: LoadPlugin logfile LoadPlugin cpu LoadPlugin network LoadPlugin memory <Plugin network> Server"192.168.8.37" "25826" </Plugin> collectd.log in server: [2011-08-03 02:36:04] Exiting normally. [2011-08-03 02:36:04] rrdtool plugin: Shutting down the queue thread. [2011-08-03 02:36:04] network plugin: Stopping receive thread. [2011-08-03 02:36:04] network plugin: Stopping dispatch thread. [2011-08-03 02:37:11] Initialization complete, entering read-loop. collectd.log in client: [2011-08-02 17:31:44] Initialization complete, entering read-loop. results thst execute netstat on server: netstat -ulpn | grep 25826 udp 0 0 192.168.8.37:25826 0.0.0.0:* 4744/collectd problem: but there is noting in "/opt/collectd/var/lib/collectd/" on ser yes,I move the port number of "25826" as your propose(But I think this is the default port for coolectd).there is no rdd files recived on server. collectd.log in client collectd [2011-08-03 10:01:36] plugin_read_thread: Handling memory'. [2011-08-03 10:01:36] plugin_read_thread: Handlingcpu'. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = used; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = user; [2011-08-03 10:01:36] uc_update: uml/memory/memory-used: ds[0] = 280412160.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-user: ds[0] = 0.100008 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = buffered; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = nice; [2011-08-03 10:01:36] uc_update: uml/memory/memory-buffered: ds[0] = 344182784.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-nice: ds[0] = 0.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] network plugin: flush_buffer: send_buffer_fill = 1340 [2011-08-03 10:01:36] network plugin: network_send_buffer: buffer_len = 1340 ... [2011-08-03 10:01:36] plugin_read_thread: Next read of the cpu plugin at 1312380106.429064774. collectd.log in server collectd: [2011-08-03 20:18:08] type = network [2011-08-03 20:18:08] type = rrdtool [2011-08-03 20:18:08] network plugin: sockent_open: node = 192.168.8.37; service = 25826; [2011-08-03 20:18:08] fd = 3; calling bind' [2011-08-03 20:18:08] Done parsing/opt/collectd//share/collectd/types.db' [2011-08-03 20:18:08] interval_g = 10; [2011-08-03 20:18:08] timeout_g = 2; [2011-08-03 20:18:08] hostname_g = localhost.localdomain; [2011-08-03 20:18:08] Initialization complete, entering read-loop. It looks like, data is sending but doesn't be recived. Where is the mistake?

  Read the article

• Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

  Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

  Read the article

• OpenIndiana (illumos): vmxnet3 interface lost on reboot

  - by protomouse

  I want my VMware vmxnet3 interface to be brought up with DHCP on boot. I can manually configure the NIC with: # ifconfig vmxnet3s0 plumb # ipadm create-addr -T dhcp vmxnet3s0/v4dhcp But after creating /etc/dhcp.vmxnet3s0 and rebooting, the interface is down and the logs show: Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop() Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start() Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512 Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object I then tried disabling network/physical:nwam in favour of network/physical:default. This works, the interface is brought up but physical:default fails and my network services (e.g. NFS) refuse to start. # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2 inet6 ::/0 # cat /var/svc/log/network-physical\:default.log [ Aug 16 09:46:39 Enabled. ] [ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ] [ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ] starting DHCP on primary interface vmxnet3s0 ifconfig: vmxnet3s0: DHCP is already running [ Aug 16 09:46:43 Method "start" exited with status 96. ] NFS server not running: # svcs -xv network/nfs/server svc:/network/nfs/server:default (NFS server) State: offline since August 16, 2012 09:46:40 AM UTC Reason: Service svc:/network/physical:default is not running because a method failed. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:default Reason: Service svc:/network/physical:nwam is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:nwam Reason: Service svc:/network/nfs/nlockmgr:default is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/network/nfs/nlockmgr:default See: man -M /usr/share/man -s 1M nfsd Impact: This service is not running. I'm new to the world of Solaris, so any help solving would be much appreciated. Thanks!

  Read the article

• What are the best browser based administration tools for Linux?

  - by Kevin Kuphal

  Looking for recommendations the best comprehensive browser based administration tool for administering a Linux machine. Ideally this would be distribution agnostic. This could also be an "appliance" type product that would administer multiple machines on network. This is marked community wiki. Give your answer preferably one product per answer and vote up packages that you recommend also.

  Read the article

• Can't run utilities/.exe's that use the network from a [DFS] windows share on Windows 2008 servers. Can this be overcome?

  - by Jim Lawhon

  Under Windows Server 2008 I'm unable to run many utilities that use network resources. This works just fine under Windows Server 2003. For example: \\domain\dfs\tools$\bin\sendmail.exe ... \\domain\dfs\tools$\bin\psexec.exe ... echo %_metric% %_value% %_unixtime% | \\domain\dfs\bin\foo$\nc graphite.domain 2003 -w1 Reproducing and maintaining this folder on a large number of servers/vm's is not desirable. Is there a way to allow Windows Server 2008 to run these tools? If so, can this be enabled via GPO or in a fashion that can be scripted during automated builds? Edit: The commands/tools do work just fine, when run from local drives. Edit2: Wget example: d:\scripts\helpers>z:\bin\wget http://www.google.com SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = z:/etc/wgetrc --2011-04-11 00:32:15-- http://www.google.com/ Resolving www.google.com... failed: Host not found. z:\bin\wget: unable to resolve host address `www.google.com' wget can neither use DNS to resolve the IP nor can it use HTTP if provided an IP directly. Edit3: The problem seems to be tied to DFS/DFS shares. Tools run correctly from other normal windows-server file-shares. They also run correctly when run directly from the file-servers behind the DFS. They only fail when we attempt to run them from the DFS UNC path or mapped drives.

  Read the article

• What tools provide burndown charts to Bugzilla or Mylyn?

  - by Daniel Jomphe

  My team and I need to work on a project whose bugs are filed in Bugzilla, using Mylyn. Do you know of any tool or plug-in that provides scrum-inspired burndown charts to Bugzilla or Mylyn? Hopefully, this tool would be free for commercial usage, but we're not closed to commercial tools. Update: 4 hours of research allowed me to find very few free tools. Looks like bugzilla isn't popular in agile teams! And obviously, it's not the best fit.

  Read the article

• How can I locate all the network printers in the enterprise?

  - by AngryHacker

  When I go to Printers and Faxes dialog, I can click the Add a printer link, select Network Printer, then Find a printer in the directory. From there I get a dialog box which lets me find ALL printers in the enterprise. I need to find all the network printers with my code. How can I do this? Note that I am not talking about network printers that are connected to my PC, but all network printers in the enterprise (my workplace has almost 4000 printers). P.S. PrintServer().GetPrintQueues only returns printers attached to the computer. P.P.S. Here is a short video of what I want: http://www.angryhacker.com/toys/FindAllPrinters/FindAllPrinters.html

  Read the article

• Which tools should I use to work efficiently on a remote server?

  - by Konstantin

  I rented a virtual ubuntu server and am trying to setup a web application. I am working from ubuntu. I know how to use the command line, but it is slow and as a visual person, I prefer graphical interfaces. So I connected with nautilus via ssh and was now able to browse the directories graphically. But my permissions are just those of "other", so I cannot do much without o+rwx. What tools do you use to do setup and administrate your servers? Should I write code locally rather then directly on the server and rsync it? EDIT: It is NOT a production server, I am simply fiddling around there.

  Read the article

• Linux Mint something wrong with my .bashrc

  - by user2309862

  The path of my .basrc file is /home/vamsi/.bashrc It is weird that my file has nothing but the path I set. I think I am using a file at the wrong location or that I have lost my .bashrc file as none of the environment variables set here seem to work. #ANDROID_DEV ANDROID_HOME=/opt/android-sdk-linux export ANDROID_HOME PATH= $PATH:$ANDROID_SDK_HOME/tools export PATH PATH=$PATH:$ANDROID_HOME/platform-tools export PATH PATH=$PATH:$ANDROID_HOME/build-tools export PATH #MAVEN-PATH M2_HOME=/opt/apache-maven-3.1.0 export M2_HOME M2=$PATH:$M2_HOME/bin export M2 I was prompted to install maven2 in order to use mvn, but the android command cannot be found. Could you please help me find a solution to this issue. EDIT: Meanwhile,I tried this: export PATH=${PATH}:/opt/android-sdk-linux/platform-tools export PATH=${PATH}:/opt/android-sdk-linux/tools Now,the output of $PATH echoes: bash: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/opt/android-sdk-linux/platform-tools:/opt/android-sdk-linux/build-tools: No such file or directory

  Read the article

• What tools exist for generating "ASCII Tables", if any?

  - by Billy ONeal

  Consider a block like the following: +-----------------------------------+--------------------------+ | In Baseline | Not in Baseline | +---------------+===================================+==========================+ | In Parent # Do Not Report | Mark ACE as AlwaysReport | +---------------+-----------------------------------+--------------------------+ | Not In Parent # Iff parent depth > baseline depth | Report Always | +---------------+-----------------------------------+--------------------------+ I have seen tables like this used quite frequently. For instance, in Requests for Comments (RFC) documents, the standard format of the document is the text format. Another common case is embedding a small table like this into comments of source code. Are there tools which can take a quick and dirty representation of this in Excel, or possibly some textual format, and format it as a table like this?

  Read the article

• What are some good, free tools to run automated security audits for PHP code?

  - by James Simpson

  I've been looking for some time now and have come up short. The most promising I found was Spike PHP, which seems to no longer work. I'm looking to scan my code for potential risks of SQL Injection, XSS, etc. I've gone through most of my code manually, but with a few hundred thousand lines of code, I'm sure I missed things. If possible, are there any tools that can be downloaded and analyze code on my local machine rather than installing to the live server (this isn't a requirement if not)?

  Read the article

• Using ReadOnlyCollection preventing me from setting up a bi-directional many-to-many relationship

  - by Kevin Pang

  I'm using NHibernate to persist a many-to-many relation between Users and Networks. I've set up both the User and Network class as follows, exposing each's collections as ReadOnlyCollections to prevent direct access to the underlying lists. I'm trying to make sure that the only way a User can be added to a Network is by using its "JoinNetwork" function. However, I can't seem to figure out how to add the User to the Network's list of users since its collection is readonly. public class User { private ISet<Network> _Networks = new HashedSet<Network>(); public ReadOnlyCollection<Network> Networks { get { return new List<Network>(_Networks).AsReadOnly(); } } public void JoinNetwork(Network network) { _Networks.Add(network); // How do I add the current user to the Network's list of users? } } public class Network { private ISet<User> _Users = new HashedSet<User>(); public ReadOnlyCollection<User> Users { get { return new List<User>(_Users).AsReadOnly(); } } }

  Read the article

• what tools do you use for jquery and debugging your code?

  - by user1400

  what tools do you use for jquery and testing/debugging your code?

  Read the article

• How do you diagram ROA? What tools, conventions seem to work best.

  - by Ray

  I am interested in determining if there are any effective ROA tools or diagramming conventions that help when defining a ROA.

  Read the article

• Install VMWare Tools from VMWare Workstation 7.1.1 build-282343 on Debian squeeze: complaint about gcc path not valid

  - by Misha Koshelev

  Dear All: I am trying to install VMWare tools on Debian Squeeze. My error: Before you can compile modules, you need to have the following installed... make gcc kernel headers of the running kernel Searching for GCC... The path "/usr/bin/gcc" is not valid path to the gcc binary. Would you like to change it? [yes] uname -a: Linux debian 2.6.32-5-686 #1 SMP Sat Sep 18 02:14:45 UTC 2010 i686 GNU/Linux dpkg -l | grep make ii make 3.81-8 An utility for Directing compilation. dpkg -l | grep gcc ii gcc 4:4.4.4-2 The GNU C compiler ii gcc-4.4 4.4.4-8 The GNU C compiler ii gcc-4.4-base 4.4.4-8 The GNU Compiler Collection (base package) ii libgcc1 1:4.4.4-8 GCC support library whereis gcc gcc: /usr/bin/gcc /usr/lib/gcc Thank you Misha

  Read the article

• what tools do you use for writing jquery code and debugging your code?

  - by user1400

  what tools do you use for writing jquery code and testing/debugging your code?

  Read the article

• How can I replace jQuery Tools Scrollable bullets with numbers?

  - by Steven

  I'm using jQuery Tools for creating an article carousel. You can see in action with images here: http://flowplayer.org/tools/demos/scrollable/plugins/index.html The navigation code looks like this: <!-- wrapper for navigator elements --> <div class="navi"></div> And the plugin ads links like so: <!-- wrapper --> <div class="navi"> <a href="0" class="active"/> <a href="1" class=""/> <a href="2" class=""/> </div> The code to get it all started goes like this: $(".scrollable").scrollable({ circular: true, size: 1}).navigator(); My question is: How can I replace <a href="1" class=""/> with <a href="1" class=""> [1] </a> ?

  Read the article

• Is it possible to change where things are in Chrome's Developer Tools Script panel?

  - by T.J. Crowder

  When debugging browser-based apps using Google Chrome's Developer Tools, is there a way to change the locations of the various panes? Specifically in the Scripts panel (though I suppose it's a general question). E.g., the Watch Expressions, the Call Stack, the code pane, etc.? The defaults are okay (console at bottom, code pane upper left, a column of Watch Expressions, Call Stack, Scope Vars, etc. in the upper right), but I'd rather swap things around a bit if it's possible. There doesn't seem to be anything to grab (other than for sizing) and I haven't found a way in my searching so far, but there are (still) some things about Chrome's options that aren't ... well-advertised in the UI, shall we say :-), especially around developer tools.

  Read the article

• What tools can be used to monitor a web application? Beyond "doesn't 404"

  - by Freiheit

  I have an internal web application that has recently gone through a major version upgrade. I would like to monitor this application over the weekend and look for 'soft' errors. I will still need to spot check things by hand, but there are some common failure patterns that I think I can automate. Examples include data with bad formatting, blank rows in tables (indicates missing non-critical data), patterns for identifiers ("TEST" means one of my devs left a testing feed on), etc. I think there are applications out there that can be scripted to do things like: 1. log in 2. Go to $URL 3. select 3rd link in $LIST or $PATTERN 4. Check HTML from that link for $PATTERNS 5. Email report Are these goals sane? What applications/tools can help with this?

  Read the article

• What are the best tools for modeling a pre-existing SQL database structure?

  - by Ejoso

  I have a MS SQL database that has been running strong for 10+ years. I'd like to diagram the database structure, without spending hours laying it all out in Visio or something similar... I've seen nice models diagrammed before, but I have no idea how they were created. From what I've seen - those models were created in advance of the database itself to assist in clarifying the relationships... but my database already exists! Anyone have any suggestions for tools that would work, or methods I could employ to tease out a nice clean document describing my database structure? Thanks in advance!

  Read the article

• How do you diagram Resource-Oriented Architecture (ROA)? What tools, conventions seem to work best.

  - by Ray

  I am interested in determining if there are any effective Resource-Oriented Architecture tools or diagramming conventions that help when defining a ROA.

  Read the article

• IE9 development tools giving "Unable to attach to the process." error

  - by Urbycoz

  Notice: I have now rebuilt my machine to remove this bug, so I can no longer verify any answers. I recently installed Internet Explorer 9, and activated the development tools by pressing F12; I then clicked "script" and the "start debugging" button but I got the following error: Unable to attach to the process. Another debugger might be attached to the process. I get this message regardless of the site I am on (currently I'm on google.com). I have no other applications running, and have rebooted my machine. Can anyone suggest why this may be appearing?

  Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >