Search Results

Search found 9754 results on 391 pages for 'virtual'.

Page 258/391 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• How to start a service at boot time in ubuntu 12.04, run as a different user?

  - by Alex

  I have a server ClueReleaseManager which I have installed on a Ubuntu 12.04 system from a separate user (named pypi), and I want to be able to start this server at startup. I already have tried to create a simple bash script with some commands (login as user pypi, use a virtual python environment, start the server), but this does not work properly. Either the terminal crashes or when I try to ask the status of the service it is started and I am logged in as user pypi ...? So, here the question: What are the steps to take to make sure the ClueReleaseManager service properly starts up on boot time, and which I can control (start/stop/..) during runtime, while the service is running from a user pypi? Additional information and constraints: I want to do this as simple as possible Without any other packages/programs to be installed I am not familiar with the Ubuntu 12.04 init structure All the information I found on the web is very sparse, confusing, incorrect or does not apply to my case of running a service as a different user from root.

  Read the article

• USB webcam detected in KVM, but doesn't work

  - by Gene Vincent

  I have installed XP in a virtual machine running on Linux with QEMU/KVM (qemu-kvm-0.11.0-4.5.2). I export my Linux webcam to KVM using the switches "-usb -usbdevice host:046d:0929". The XP guest sees the webcam and the drivers install, but the camera only shows a black image. When I open the camera in Windows Explorer, it says "0 images" and a black image, while on a real XP, it says "1 image" and shows the video from the camera. I tried the same with a different webcam, but the result is the same. Any ideas what might be wrong or how I could debug this ?

  Read the article

• How Can I prevent a specific application from being run on a specific machine using Group Policy?

  - by Mike

  I know this is possible to do and I am working on it with limited success. I believe the Group Policy I want is "Do Not Run Specified Windows Applications" - I can enable this and add the .exe I want to the list of programs not to be run. I have tried this on my local machine by running gpedit.msc going to User Config Admin Templates System and then choosing that policy and editing and enabling it. Doing it this way verifies that it works as I could then not run the specified .exe (XenAppWeb.exe) So this is great. I have created a GPO to do the same thing in GP Management on my domain controller where we centralize this, enforced it, applied it to an OU, and put one of our machines into this OU to test it. I have let it sit there for 3 days, run gpupdate /force, and when I try to run XenAppWeb.exe on this machine, it still lets me run it fine. What can I look at to troubleshoot this? I should note that I am trying to enact this policy on Windows XP machines (Virtual Machines) Thanks, Mike

  Read the article

• Best practice, or generally best way to set up web-hosting server, permissions, etc.

  - by Jagot

  Hi, I'm about to set up a server upon which a friend and I will be hosting web sites, and I'll be using Debian. I've set up a LAMP solution many times just to using for local testing purposes, but never for actual production use. I was wondering what are the best practices are in terms of setting the server up, in reference specifically to accessing the web root directory. A couple of the options I have seen: Set up a single user account on the server for us both to use and use a virtual host to point to the somewhere in the home directory, e.g. /home/webdev/www. Set each of us up a user account, and grant permissions in some way to /var/www (What would be the best way? Set up a new group?) I want to get this right when I first set this up as there won't be any going back for a while once our first site is up and running. Appreciate any guidance in advance.

  Read the article

• setting up ssh on minix 3.2

  - by Mark

  I have install MINIX 3.20 on VMware player on LINUX. Now, I am trying to ssh into Minix from the same Linux machine, but I am encountering some problems. First I installed openssh on MINIx then I tried to ssh onto the Minix virtual machine with ssh [email protected] but I got the following output: [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied (publickey,password,keyboard-interactive). I am sure the password I entered is correct, I have tried to ssh into MINIX on MINIX and it worked but not when I tried it from my linux machine. I have followed the steps for setting up ssh from this webpage, but it didn't work as shown above.

  Read the article

• SQL2005 reporting server: intense security activity

  - by David Wimbush

  On my reporting server the Security log shows large numbers of Logon/Logoff events, often 10 or more, when you run pretty much any report in the Report Manager. Is this normal or is it a classic sign of having the wrong setup? Some system details: Windows Server 2003 R2 SP2, virtual server running under VMWare). SQL Server 2005 SP3 Standard Edition, running databases, Report Manager, and Ananlysis Services cubes. No other major services on the machine (i.e. it's not a domain controller, Exchange server or anything like that). Any ideas, please, guys?

  Read the article

• How to resize root LVM partition in Fedora without LiveCD or Rebooting

  - by Cerin

  I have a virtual machine that recently had its disk image increased from 20GB to 50GB, and fdisk -l verifies that the VM can see this new size. Now I need to resize my root LVM partition to fill the extra 30GB. I've found several articles about resizing LVM, but the few that cover resizing the root partition all claim you need to boot from a LiveCD. Is there any way to do this without taking down the server? The server is critical, so I'd like to minimize downtime.

  Read the article

• How do I make the Windows low memory warning less sensitive?

  - by Stephen

  I keep getting this annoying low memory warning/prompt to close games I play. It happens very often and I still have ~6 gigs of ram free. I disabled virtual memory because it was putting stuff on the pagefile when I had 10 gigs free ram so that spiked my disk usage. Is there any way to disable this warning? I have 16GB ram so it shouldn't be an issue. I would prefer to keep pagefiles off because my HD is very loud so it's nice to keep it spun down as much as possible. I don't want to disable it completely. Ideally, I would like it to go off when I have ~2GB left rather than 6, but if this isn't viable, I may just disable it completely.

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• Text template or tool for documentation of computer configurations

  - by mjustin

  I regularly write and update technical documentation which will be used to set up a new virtual machine, or to have a lookup for system dependencies in networks with around 20-50 (server-side) computers. At the moment I use OpenOffice Writer with text tables, and create one document per intranet domain. To improve this documentation, I would like to collect some examples to identify areas where my documents can be improved, regarding general structure and content, to make it easy to read and use not only for me but also for technical staff, helpdesk etc. Are there simple text templates (for example for OpenOffice Writer) or tools (maybe database-driven) for structured documentation of a computer configuration? Such a template / tool should provide required and optional configuration sections, like 'operating system', 'installed services', 'mapped network drives', 'scheduled tasks', 'remote servers', 'logon user account', 'firewall settings', 'hard disk size' ... It is not so much low-level hardware docs but more infrastructure / integration information in these documents (no BIOS settings, MAC addresses).

  Read the article

• Resizing a System Partition Windows Server 2003 VM (Getting GParted Error)

  - by Dina

  I am getting an error while trying to resize System Partition for Windows 2003 Server (this is a VM on a Hyper-v Windows Server 2008) using GParted Live CD ISO. Followed this tutorial: http://malaysiavm.com/blog/how-to-resize-windows-2003-server-virtual-disk-on-vmware-esx/ and GParted Doc http://gparted.sourceforge.net/larry/resize/resizing.htm (They are very similar) The VM has a Dynamic VHD file, I have already increased it using Hyper-v. GParted doesn't give any clues or details for the error. Just simply errors when trying to grow the partition. Any ideas what I can do? Thanks! Using version of Gparted: gparted-live-0.13.1-2

  Read the article

• Why is my ethernet interface in promiscuous mode

  - by nhed

  I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

  Read the article

• Squid proxy server not forwarding traffic

  - by DilbertDave

  I'm trying to set up a web filtering system (dans guardian) on my home network but am failing at the first hurdle - configuring the Squid Proxy server. No matter what I do I cannot seem to configure it properly and I just receive the 'Requested URL could not be received' error page. If I remove the proxy setting on the browser everything works normally. Ultimately I want to run this on something like a Raspberry Pi but at the moment I'm testing with a virtual machine (although efforts with a netbook were equally unsuccessful). The VM has a clean installation of Linux Mint 15 and I've installed squid via apt-get. I've followed numerous walkthroughs but this on (https://help.ubuntu.com/lts/serverguide/squid.html) pretty much sums up the process I've been taking. I'm obviously missing something but cannot figure it out - any assistance appreciated.

  Read the article

• Are there any benefits to using a Distributed vSwitch for iSCSI?

  - by dunxd

  I am designing our vSphere farm - we'll be migrating from ESX 3.5 to 4.1. I plan to set up a new farm using ESXi 4.1, and move the Virtual Machines on the 3.5 farm into it by shutdown, then import. In ESX 3.5 there is no distributed networking, so each host has a vSwitch connected to my SAN NICs, and a port group for the vmkernel. In vSphere (ESXi 4.1) I have the extra option to set up a distributed vSwitch and distributed port groups for vmkernel to access iSCSI storage. Is there any benefit to this, or should I stick to non-distributed networking for iSCSI.

  Read the article

• 504 Gateway Timeout on server clusters

  - by Sixfoot Studio

  Hi All, Here's our scenario: We're running three websites on three web servers hosted on virtual machines running the following: IIS6 Win 2003 Standard Edition Oracle 10g Sitefinity 3.7 We do not have constant control over these servers and something's gone wrong in the interim in that we're getting constant 504 Gateway Timeouts. The other thing that's happening is that if you hit one of the sites, that site is trying to pull themes from one of the sites App_Themes folder in Sitefinity, which of course should not be happening at all. If someone has any ideas on why this should suddenly have started happening I would appreciate it. Many thanks

  Read the article

• Running PHPmyAdmin on Nginx, port 8080 passed to varnish not working well!

  - by amrnt

  I installed Nginx, Varnish and PHP-fpm. Then I installed PHPmyAdmin and made a virtual host for it: server{ listen 8080; server_name phpmyadmin.Domain.com; access_log /var/log/phpmyadmin.access_log; error_log /var/log/phpmyadmin.error_log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include /opt/nginx/conf/fastcgi_params; } } When I go to phpmyadmin.Domain.com it works as expected! but after submitting username/password it redirects me to phpmyadmin.Domain.com:8080/index.php?... with page cannot be found response as well! What could I do?

  Read the article

• win2008 R2 server core software RAID

  - by shimonyk

  I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

  Read the article

• Can Windows XP remember file icon position?

  - by g .

  Windows allows you to arrange icons however you like in a window. However after some time when I go back to the window, it has forgotten the icon positions and has completely rearranged the icons. Is there a way to preserve the icon positions? In the previous version of Windows I used, this would happen on rare occasions (about 6 months) and it might only move a couple of icons. Now it is happening practically every day and it is every single icon. Attempts to rearrange them manually are futile and it is increasingly maddening. Searching Google, I have found a number of programs that allow you to save and restore icon position on the desktop. But, this is just a regular folder window so I am not sure if any of those would even work. Some details: Windows XP SP 3 running in Parallels 5 virtual machine Auto Arrange and Align to Grid are NOT turned on Fresh OS install and only setting icon positions in one window

  Read the article

• Ubuntu Linux: Process swap memory and memory usage

  - by David Halter

  My Ubuntu eats more memory than the task manager is showing: sudo ps -e --format rss | awk 'BEGIN{c=0} {c+=$1} END{print c/1024}' 1043.84 free -m total used free shared buffers cached Mem: 3860 1878 1982 0 20 679 -/+ buffers/cache: 1178 2681 Swap: 2729 1035 1693 That's strange. Can someone explain this difference? But what is more important: I'd like to know how much memory a process is really using. I don't want to know the virtual memory size, but rather the resident memory plus swap of a process. I have also tried to output the format param "sz" of 'ps', but the sum of this is to high (5450 MB) (param 'size' gives 8323.45 MB). Are there any other options? I really want to use this, to determine which programs/processes are eating to much memory (and swap), to kill them, because hibernate might not be working if the swap partition is to little.

  Read the article

• CHROOT for shell script testing

  - by Josh

  I am looking at setting up a shell script in order to properly document and automate the process I am using to setup a few servers we have. In order to test the shell script through its different stages I was thinking a CHROOT would be ideal, since I can wipe out the "virtual root" and create it on the fly. I have never used CHROOT before, however. I was just curious what are the exact steps I would need to follow to implement this process of creating a chroot (with the basic core functions that would be needed to install apache/php/etc.)? and then destroying it?

  Read the article

• Cloning a Windows server with VMWare ESXi without domain membership conflicts

  - by Brad

  We are using VMWare ESXi 3.5, and have found it quite useful for cloning a live server to then use the virtualized version to test/practice software upgrades. The trouble is, when the virtualized version fires up, it registers itself on our domain (Active Directory), causing the original server to no longer be accessible via Windows shares. The fix is to remove the virtualized version from the domain, configuring it to use a workgroup instead, deleting the Computer account in AD, and then removing the real server from the domain and re-adding it. Is there a better procedure? Note, we cannot simply disconnect the virtual network from the virtualized server, as it needs to be connected to the network to actually be removed from the domain.

  Read the article

• Restoring files from blueprint on command

  - by Nick

  I am setting up a server. I already have rented a machine running centOS 6 but I have run into a bit of a technical problem with configuring the server software: The server will have some files that it will try to read/write to them but what I need is a way to have a blueprint of these files and everytime the server restarts the files that it used get deleted and replaced by the blueprints. I have heared of a RAM disks or Virtual File Systems but didnt quite understand how they work or how to set them up. The server software is written in java which means bash commands can be run from it. I cannot modify what happens when the server shuts down entirely what I can do is run a command before the server runs the final shutdown save

  Read the article

• Giving a permission to write and read from /var/www

  - by mako

  I need that directory, as I want to put my sites there, so that apache can run them.. It is my virtual directory path.. and I am new to linux.. I just want to read and write from that directory.. How do I enable creating/saving/reading files/folders from that directory? What command do I give? I tried a few, but I think I need to be a super user to make the folder writtable readable. Note that I dont care about security.

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >