Search Results

Search found 9286 results on 372 pages for 'transfer speed'.

Page 259/372 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• What does the 'Burst Rate' stat mean in HDTune?

  - by UpTheCreek

  I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• Gigabit network limited to 25MB/s by CPU. How to make it faster?

  - by netvope

  I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? The other computers in the network can usually transfer at 50+MB/s without problems. And a minor question: How can I find out what is the driver in use for eth0?

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

• Apache https is slow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• "Synchronizing" files between local and remote server using Git

  - by ConcreteVitamin

  My intended goal: I maintain some files in my local computer, and I also share them with others by putting them on my website. In the past I did this by manually uploading all the files using FTP, every time I did some modifications etc. Now, I am wondering if I can use Git to help me achieve this (by "pushing" the local files to my website server). My server is hosted by Dreamhost. First Attempt: First, I try this tutorial. I first push my local files to my Github repo, and ssh into my Dreamhost server to clone --bare from the Github repo. But I find that git does not transfer my files. So I ignore the tutorial. Second Attempt: I ssh into my Dreamhost server to clone directly from Github. My files are all transfered to the server. Then, on my local computer, I git remote add dreamhost ssh://[email protected]/~/my-project. Then I add some files, and commit, and git push dreamhost master. And a bunch of errors appears: http://geotakucovi.com/gitError.jpg As a newbie Git user, I must have missed something. Please help!

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• Bind9 not doing anything with forwarded query responses?

  - by Rykaro

  I have a Bind DNS server that is the local production DNS server and a Windows 2008 R2 domain controller which provides DNS for a lab environment with the domain xyz.lab. I've configured the Bind DNS to forward DNS requests for the domain xyz.lab to the Windows DNS server with this config: zone "xyz.lab" { type forward; forward only; forwarders { x.x.x.x; }; }; zone "x.x.x.in-addr.arpa" { type forward; forward only; forwarders { x.x.x.x; }; }; And Bind options are (the all_internal acl includes the subnets of both the production and lab networks as well as the loopback of the bind server): allow-query { all_internal; }; allow-recursion { all_internal; }; allow-transfer { none; }; notify no; minimal-responses yes; version "unknown"; Unfortunately, when I do an nslookup or dig on the bind server for a host on the lab domain, the request times out. The logs on the Windows 2008 DNS server show it receiving the query and responding to it and a network packet trace shows the query responses arriving at the Bind DNS server. The servers reside on the same switch with a router providing connectivity between the layer 3 subnets (production and lab are on different subnets) and there is a round trip time of between 3ms and 5ms on pings between the two servers, so I don't think there is an issue with latency causing a timeout of the query. In summary a query-response arrives back at the Bind server and the nslookup/dig times-out. Why does the Bind DNS not seem to be doing anything with the query responses when it receives them?

  Read the article

• Apache: Setting up local test server with subdomains

  - by RC

  Hi everyone, I have XAMPP running on my desktop machine, and I do all my work on it with no issue. http://localhost ---> points to public_html http://site1.localhost ---> points to site 1 http://site2.localhost ---> points to site 2 http://site3.localhost ---> points to site 3 Entering the above URLs in my web browser on the machine with Apache works great, and I can work on multiple sites within distinct subdomains. But what I want to do now is to transfer Apache and all the files to another Windows 7 machine within the LAN, but still be able to view the subdomains from my main development machine. With a vanilla XAMPP installation on the new hosting machine, entering the IP address of that machine (e.g. 192.168.1.10) into my development computer would send me to the main public_html folder. But how do I set up subdomains such that I can access it externally? For example, http://site1.devmachine Thanks for any help.

  Read the article

• mysqld - master to slave replication using rsync innodb, sequence number issues

  - by Luis

  I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

  Read the article

• How and where do you manage your domain names?

  - by Saif Bechan

  In the past several years doing web development I often times needed to buy new domain names. I changed registrars a lot also so over the years I have multiple domain names scattered over different registrars all over the world. Now I want to bring a little structure into my business, and I am at the point that I want to be able to have easy control over my domain names in a convenient way. Does anyone have an idea on what the best way is to give structure on this. I have made some suggestions maybe you can comment on them for me. 1) Just leave it as it is I can leave everything as it is. To make adjustments I have to log into different panels, and for some registrars I have to email the changes. 2) Transfer all the domains to one registar This will cost a lot, about 10 usd per domain name. But if I can find a registar where I have full control over DNS this is worth looking at. Can you give me some comments on how you are doing things now. Maybe also which registrar you prefer on doing things.

  Read the article

• Load Balancing is unusual in Apache in round-robin mode when one of the tomcat is brought down

  - by srayker

  We are facing a unusual behavior with round-robin load balancing on apache when one of the tomcat server is brought down. Our Setup: we have 2 apache web servers on the front end using mod_jk module for load balancing using round robin for load distribution. We also have enabled session stickyness. This is followed by 4 tomcat servers on which the applications are running. Sometimes under heavy load, if there is a slowness in our DB tier we find that eventually one of the tomcat goes into a hung state and would need a restart. The moment we bounce the tomcat we see a spike in requests in one of the server and this would also go into hung state and need a restart. Eventually all the server will face similar condition. What beats me is why does the Apache transfer the whole load to one server instead of distributing the load. We are now trying the worker.balancer.method=B to see if this helps to resolve our issue. Any thoughts on resolving the issue is greatly appreciated. regards, srayker

  Read the article

• How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

  - by leto

  Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

  Read the article

• One single page showing 3 requests (also printing the headers)

  - by Korcholis

  Someone in my studio designed a webpage some years ago, and now the client decided to change the server (he moved to a Linux Apache server running Gen2 SMP, 64 bits, PHP version 5.3.8, Standard MYSQL version 5). It suddenly started to do weird things. When clicking on a link that requires login, the page redirects you to the login page using header() function in PHP. Curiously, the page shows this: OK The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. HTTP/1.1 200 OK Date: Mon, 15 Oct 2012 17:27:32 GMT Server: Apache/2.2.22 (Unix) FrontPage/5.0.2.2635 X-Powered-By: PHP/5.3.8 Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Keep-Alive: timeout=5, max=399 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html 232c Then the page itself, and then, another header: 0 1f4 OK The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. 0 What's most intriguing is that if you refresh the page or hit enter on the url, it loads correctly. I've been checking the logs, and it only blames of an inexisting favicon. I also checked the .htaccess, everything was correct (RewriteBase was / as intended, and the only stuff there is another rule that moves ^en/ requests to request?lang=en. Has anyone faced something like this? Edit: IE doesn't trigger these two headers. This is getting wierder.

  Read the article

• Moving an external hard drive while running

  - by user1108939

  I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

  Read the article

• amazon ec2-medium apache requests per second terrible

  - by TheDayIsDone

  EDITED -- test running from localhost now to rule out network... i have a c1.medium using EBS. when i do an apache benchmark and i'm just printing a "hello" for the test from localhost - no database hits, it's very slow. i can repeat this test many times with the same results. any thoughts? thanks in advance. ab -n 1000 -c 100 http://localhost/home/test/ Benchmarking localhost (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Apache/2.2.23 Server Hostname: localhost Server Port: 80 Document Path: /home/test/ Document Length: 5 bytes Concurrency Level: 100 Time taken for tests: 25.300 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 816000 bytes HTML transferred: 5000 bytes Requests per second: 39.53 [#/sec] (mean) Time per request: 2530.037 [ms] (mean) Time per request: 25.300 [ms] (mean, across all concurrent requests) Transfer rate: 31.50 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 7 21.0 0 73 Processing: 81 2489 665.7 2500 4057 Waiting: 80 2443 654.0 2445 4057 Total: 85 2496 653.5 2500 4057 Percentage of the requests served within a certain time (ms) 50% 2500 66% 2651 75% 2842 80% 2932 90% 3301 95% 3506 98% 3762 99% 3838 100% 4057 (longest request)

  Read the article

• Global Email Forwarding with EXIM?

  - by Dexirian

  Been trying to find a solution to this for a while without success so here i go : I was given the task to build a High-Availability Load-Balanced Network Cluster for our 2 linux servers. I did some workaround and managed to get a DNS + SQL + Web Folders + Mails synchronisation going between both. Now i would like my server 2 to only do mailing and server 1 to only do web hosting. I transfered all the accounts for 1 to 2 using the WHM built-in account transfert feature. I created 2 different rsync jobs that sync, update, and delete the files for mail and websites. Now i was able to successfully transfer 1 mail accounts from 1 to 2, and the server 2 works flawlessly. All i had to do was change the MX entries to point to the new server and bingo. Now my problem is, some clients have their mail softwares configured so that they point to oldserver.domain.com. I cant make the (A) entry of oldserver.domain.com point to the new server for obvious reasons. I thought of using .foward files and add them to the home directories of the concerned users but that would be very difficult. So my question is : Is there a way to configure exim so that it will only foward mails to the new server? I need to change all the users so they use their mail on server 2 without them doing anything. Thanks! EDIT : TO CLARIFY MY PROBLEM Some clients have their mail point to oldserver.xyz instead of mail.olderserver.xyz I want to know if i can do something to prevent modifying the clients configuration I would also like to know is there is a way to find out what clients aren't properly configured

  Read the article

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• Can't connect to FTP server from a specific location

  - by wv_pip

  Last week while uploading website files to our server via FTP, the transfer failed. Ever since then, I haven't been able to connect to the server from work. I can connect just fine from home, or by using an FTP app on my cell phone as long as I'm on the cell network. I can't access the server from any machine on my work network. It's not a credential issue, either. The error message that I always get says that a connection cannot be established, and I am never prompted for my credentials. I have changed absolutely nothing on our domain controller or our firewall/router. I've contacted our ISP (who hosts the website/FTP server) and they can't find anything wrong on their end. They insist that it must be something here at the office that is blocking access. I've also tested access to other FTP servers (ea.com, nvidia.com, etc.) so I know that port 21 is not being blocked. I'm totally stumped. Any help is much appreciated. EDIT: wireshark info here: http://www.cloudshark.org/captures/85a118ae9296?filter=ip.dst%3D%3D66.118.64.208

  Read the article

• Monitoring Between EC2 Regions

  - by ABrown

  I'm working on a small EC2 project that involves a handful of servers in two different regions (US East and EU West). My first task is to implement a Nagios monitoring solution. Monitoring within a region is simple - I just use the private domain names/IPs, but I'm a little unsure of the best way to handle monitoring the second region without setting up a second Nagios install. The environment is fairly static, so I'm not going to be scripting the configuration with the EC2 tools just yet. As I see it, I have two options. Two Nagios installations (which is over-kill for the small number of servers I'm dealing with). Pros: I don't have to alter the group permissions nor do I have to pay for the traffic, redundancy in the monitoring solution - I could monitor the Nagios servers. Cons: two installations to deal with and I'd need to run another server instance. Have the single installation monitor both regions. Pros: one installation to deal with. Cons: slightly reduced security - security group will have to have NRPE (5666) opened for one source IP and also paying for a small amount of bandwidth at the Internet rate for data transfer between the regions. I guess my question is - how have others handled this problem and what are your recommendations? Thanks!

  Read the article

• SSH very slow when connecting from external [closed]

  - by wnstnsmth

  Possible Duplicate: ssh delay when connecting We have a CentOS server that we use for internal testing purposes, which has sshd enabled. When I (as a developer) am at the company, I use ssh [email protected] to connect to it - and it works flawlessly. Now, in order to work from home, accessing the server via the company's static IP, we set up another port for ssh, 2020. So I execute ssh -p 2020 [email protected] and am immediately granted for a password. After entering the password, it takes up to 30 seconds until I can access the server. Same is with SFTP (i.e. uploading files takes about 30 seconds until it begins to transfer). As you can imagine, if you have to regularly upload files to a webserver via SFTP, this is very tedious. So I looked at similar questions and thus edited the sshd_config file on the server, setting UseDNS to "no" and GSSAPIAuthentication to "no" (this one also in ssh_config on the client) - it did not work.. Please have a look at the -vvv output when externally accessing the server: ssh -p 2020 -vvv [email protected] PasteBin: ssh What could it be? Do you need more info?

  Read the article

• Visual studio 2010 remote debugging is very slow (across domains, over vpn)

  - by alex

  Overall debugging works, but each step through code takes dosens of seconds. I've already closed all additional windows like stack trace,watches,autos; deleted all breakpoints. server and dev machine are located in different domains, so i set up local user on both, with matching password. remote debugger is running as service. looking at security log, I found quite a lot of entries about remote debugging account logging in (record about every minute). Any suggestions on how i can speed up remote debugging? dev computer: quad core, 8 Gb mem, win 7 x64 , visual studio 2010 ultimate target server: asp.net website , 2xdual core xeon, 2Gb mem, remote debugger 2010 communication channel: vpn , 5 mbit , latency about 20ms. (seems that debbugging never uses more than 20 kb/s)

  Read the article

• Angle and Length of Wind Barb Flags

  - by Kristopher Johnson

  I am working on an application that displays surface winds. Wind speed and direction will be displayed using "wind barb" symbols, as described here: Plotted Winds My question: Are there any standards for the angles and lengths of the "flags" in relation to the the wind-barb "pole"? Eyeballing the diagrams I've seen, I think that an angle of 60 degrees and a flag length about a third as long as the pole length would look fine, but if there are any officially defined standards for these symbols, I'd like to follow them. Note: This app will not be used for navigation, so it is not very important that it look exactly like an official chart. I just don't want it to be ugly, or to look obviously wrong to a knowledgeable user.

  Read the article

• LinkedHashMap vs HashMap != LinkedList vs ArrayList

  - by Markos Fragkakis

  I have read that LinkedHashMap has faster iteration speed than HashMap because its elements are doubly linked to each other. Additionally, because of this, LinkedHashMap is slower when inserting or deleting elements. Presumably because these links also need to be updated. Although I can see an analogy to LinkedList vs ArrayList, in that the elements of LinkedList are also doubly-linked, I read that it iterates slower than ArrayList, and has faster insertion and deletion times. Why is this? Perhaps I am making a mistake somewhere? Cheers1

  Read the article

• Database design for summarized data

  - by holden

  I have a new table I'm going to add to a bunch of other summarized data, basically to take some of the load off by calculating weekly avgs. My question is whether I would be better off with one model over the other. One model with days of the week as a column with an additional column for price or another model as a series of fields for the DOW each taking a price. I'd like to know which would save me in speed and/or headaches? Or at least the trade off. IE. ID OBJECT_ID MON TUE WED THU FRI SAT SUN SOURCE OR ID OBJECT_ID DAYOFWEEK PRICE SOURCE

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >