Search Results

Search found 2252 results on 91 pages for 'hd'.

Page 26/91 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• ATI Radeon Drivers works with which linux distribution and version?

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. UPDATE: The kind of problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta Thanks

  Read the article

• How to use 3T SAS HDDs which aren't supported by Dell PERC 6i

  - by Sunry

  We bought several 3T SAS hard disks want to use with our Dell R710 server. But we found our R710 can't recognize the 3T hd, and then we dig out the raid card is PERC 6i which doesn't support it. Contacted with Dell that H700 and H800 support 3T hd, thought we can buy a H700 , but the SAS cable is not available in the market right now. And it seems very hard for us to change the raid card, also no suitable tools to tease the special screws. So I want to know if any other method to use these 3T hds instead of putting them in the warehouse? Can I low formatting it to 2TB, and plug it into Dell R710 to use? Or a SAS to USB adapter to use it as USB external disk? I just want to use them by Dell R710 even external.

  Read the article

• Ubuntu 11.04: No Audio Output

  - by Jason George

  I installed a fresh copy of Ubuntu 11.04 earlier this week and I'm having trouble getting my audio online. It was working fine in 10.04 and all the resources I can find on troubleshooting seem to be fairly dated so I'm not sure if they apply. CMI8788 [Oxygen HD Audio] Analog Stereo Duplex Playing a WMA file shows 0.00db output when I mouse over the sound controller in the status bar. Obviously, no output from my speakers. I tried adjusting the profile, thinking I might have the wrong one. That seems to have made things worse. Where mouse over originally said something along the lines of "Oxygen HD Audio," it now reads "Dummy Output." Selecting "Test Speakers" in sound preferences crashes the dialog. Any pointers would be great.

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by razass

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

  Read the article

• Updating windows xp hard drive controller from ubuntu live disk

  - by Joel

  The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

  Read the article

• harddrive problem (usb external)

  - by masfenix

  Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

  Read the article

• Mac OS X Time Machine Restore - Failure?

  - by Rabe

  I've got an late 2009 macbook pro 13' and yesterday I replaced the native hd (new hd: Hitachi; same form factor). I choosed "Restore from Time Machine" in the options menu on the snow leopard install discs and waited several hours to complete. After an reboot the mac shows up a white screen with apple logo and tiny loading animation. Nothing happens. After another restart; the same. Now I cant boot from CD using the C-Key and I have no idea how to fix that problem.

  Read the article

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Cheap machine with Xen to have more than one personal dev servers with RAID option?

  - by AJ

  I do not have a lot of money so when I need a personal dev servers I decided I will use Xen on one machine to run various OS's. Although, I really like Dell Zino (http://www.dell.com/us/en/home/desktops/inspiron-zino-hd/pd.aspx?refid=inspiron-zino-hd&cs=19&s=dhs) as a very economical and compact PC which can be scaled to 8GB of RAM, I do not know how to have a RAID setup, for the backup. Is there an economical way to add a RAID setup to Dell Zino or I would have to invest in a proper box for that? Thanks for your help in advance. **Also, please let me know if this question is not meant for this forum.

  Read the article

• Can't Read/Write the Hard disk used in NAS

  - by mgpyone

  I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

  Read the article

• Vnc viewer authentication failure

  - by Twosingleton

  I recently backed up my data and I had moved the vnc viewer executable from my PC to my portable hard disk. Realizing that I no longer had vnc, I got the latest one, but all of a sudden I could not connect to my server anymore and got authentification failure. So I moved the VNC exectuable back from my portable HD to my local HD. And I am still getting Authentification failure errors. I had a certain setup and I don't want to re-create it, do you know how I can recover or what happened to get auth failures all of a sudden ? I checked and the vncserver process is running fine. Old VNC viewer: vnc-4_1_3-x86_win32_viewer.exe New one:

  Read the article

• Hyper-V Virtual Disk Creation Taking Forver

  - by mnemosyn

  After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

  Read the article

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

• Should I care about my HDD?

  - by Vimvq1987

  This is screenshot of HD Tune: Should I care about my HDD? Are these warnings important?

  Read the article

• Should I care about my HDD?

  - by Vimvq1987

  This is screenshot of HD Tune: Should I care about my HDD? Are these warnings important?

  Read the article

• Is it safe to use an IDE to SATA power adapter for an extended period of time?

  - by qwertymk

  I just bought a computer from HP and they failed to include SATA power connectors with the power supply other then the one HD and DVD drive. Meanwhile I have two IDE to SATA power adapters that came with my "USB 2.0 to SATA/IDE cable" http://www.amazon.com/USB-2-0-SATA-Cable-Adapter/dp/B001OORN06 3rd pic on the left. I was wondering if I would just open up my computer and use it to plug it my SATA drives to the IDE power sources and mount it to the motherboard, would it damage my drives in the long run or have any other significant effects. A friend told me he knows people who have had their HD burn out because of this

  Read the article

• Late Model 2011 Macbook Pro with SSD appears to be off somehow

  - by chris

  Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

  Read the article

• 2 HDs in RAID 1 with 2 partitions ?

  - by Prix

  Hi, i am not very familiar with raid partitons and am not even sure if this is the right place to ask about it, but i hope that if it is not that some one can point me on the right direction. This is my situation, i have 2 500 GB hds and a 3ware pci-e hardware for raid and i wanted to make a RAID 1 but i dont know if i can make more then one partition for it, for instance: MAIN HD: os partition: 100GB data partition: rest of left size and make the RAID 1 either work on all the HD or just on the data partition of it. that is on windows xp sp3 and the 3ware allows bootable raid.

  Read the article

• Building a network at home, what cables to use (if any)?

  - by Faruz

  My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

  Read the article

• Why is my portable WD MY PASSPORT drive is not recognized?

  - by kloop

  My "MY PASSPORT" (Western Digital) portable drive is not recognized OSx. It used to be recognized, but not anymore. It does not appear in /Volumes. The hard drive is recognized by a Linux machine. I am not sure what happened -- any ideas how to fix that? Thanks. EDIT: ` #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *750.2 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 749.3 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *1.0 TB disk1 1: DOS_FAT_32 MY PASSPORT 1.0 TB disk1s1 `

  Read the article

• Dual boot centOS and Win7

  - by user1855965

  I posted this on stackoverflow, but it looks like superuser would be more appropriate. I have a CentOS 5 machine that runs Windows 7 as a dual boot. CentOS is the main OS and each OS is set up in a specific hard drive. This was set up before I joined the company and I don't really have need to run Windows now. My question is: can I, from CentOS, reformat the Windows HD, change GRUB settings and get the HD to be available on CentOS? Happy to provide more info if this helps. Many thanks for your help and apologies if this is a very simple issue... I don't want to blindly test things on this machine as it is used on a daily basis by several users.

  Read the article

• ATI Radeon Drivers works with which linux distribution and version? [closed]

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

  Read the article

• What's the easiest way to move from one Macintosh to another?

  - by schnapple

  Here's the story: Company bought me a $599 Mac mini (as of this writing, 2.26GHz/160GB HD/2GB RAM) I have it set up to some extent with software for development Company decides it needs a second Mac for QA I convince company to buy the $799 Mac mini for the second machine (as of this writing, 2.53GHz/320GB HD/4GB RAM), let me have it for development, and let QA have the $599 Mac mini Company does just that, now I have both So, what's the best way to move from one of these to the other? Just set up everything on the second one and be done with it? Can I transfer things from the first to the second somehow? I'm running Time Machine backups to an external drive on the $599 Mac mini, if that helps. Also both of these will be on the network at the same time, other than renaming one of the machines are there considerations to be had there?

  Read the article

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >