Search Results

Search found 2368 results on 95 pages for 'jeff smith'.

Page 26/95 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Mobile Intel® GMA 4500MHD boost

  - by Andy Smith

  My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• I would like to prevent these entries from being added to the eventlog.

  - by David Smith

  Our client's application EventLog is getting filled up with warnings due to a bug in the Microsoft SQL Server report viewer control, http://support.microsoft.com/kb/973219. They have thousands of users running reports so this is making their eventlog hard to use and they want them removed on a frequent basis. I tried using PowerShell to remove the events, but that does not seem possible. Is there a way to prevent these entries from being written to the event log in the first place? I'm thinking I would like to filter out events where event source="ASP.NET 2.0.50727.0", eventId ="1309" and Message contains "Reserved.ReportViewerWebControl.axd"

  Read the article

• How much memory does an IIS 7 app pool consume?

  - by Jeff Costa

  Is there a baseline value for how much RAM an app pool consumes under IIS7?

  Read the article

• vmware - ACE, Workstation - how to manage remoe clients??

  - by tom smith

  Hi. Exploring Vmware products/services and have a few questions. As I understand VM, you can use VMWare Workstation to create a VM of a target machine/box/OS. Let's call this VM, "foo". If I have 100 client PCs in my dept, and I want to install the VM (foo) on each client, and also manage the remote VM instances of (foo). How can I accompish this? Let's assume that the client machines are running Windows7, and have the vmplayer app installed on the box. I'm looking to do the following kinds of actions regarding the remote client machines: -Update the foo VM/image with new updated copies -Make sure that every VM "foo" has the same user, but a unique passwd -Monitor the traffic/status of each client VM "foo" oin each client -Start/Stop each client VN "foo" from the master console -Etc... Can this be accomplished? How would I do it, what services/products would I need? I've tried toalking to a few of the pre-sales guys in VMWare, and got nowhere, other than telling me to email my questions!! Looking at google shed more insight, but I still have questions. So, if you have detailed VMWare understanding, pointers to consultants, or resellers who can help, all pointers are greatly appreciated. Thanks -tom

  Read the article

• Does DFSR replicate shadow copies?

  - by Jeff Sacksteder

  There a a few questions related to using DFSR and Shadow Copies together, but none that indicates if Shadow Copies replicate or not. Meaning, if I have a a pair of DFS replicas with Shadow Copies on Server-A, can I revert that file to a previous version on Server-B? If so, will that reversion be replicated back to Server-A? I suspect not- that VSS is a local NTFS feature and outside the scope of replication, but I cannot verify that myself at the moment.

  Read the article

• Why are SMART error rates going down?

  - by Jeff Shattock

  I have a hard drive that's part of a Linux software raid5 array. SMART has reported that its multi_zone_error_rate was 0, then 1, then 3. So I figured I better start backing up more frequently and prepare to replace the drive. Now, today, the multi_zone_error_rate of that very same drive is back down to 1. It seems that 2 errors unhappened while I wasn't looking. I've also seen simliar behaviour by inspecting the syslog on the server. Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 8 02:31:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 These are raw values, not the human-useful values that smartctl -a produces, but the behaviour is similar: error rates changing, then undoing the change. None of these are the drive that had the multi_zone weirdness. I haven't seen any problems from the RAID; its most recent scrub ( < 24 hours ago) came back totally clean. The only thing I can think of is that the SMART reporting circuitry on the drive isn't working properly all the time. The cables are in tight on the drive and board. What's going on here?

  Read the article

• cloud/grid computing

  - by tom smith

  Hi guys. I'm appologizing in advance to the guys who will tell me this isn't a tech/server/IT issue! But I've been beating my head around this for a couple of days now. I'm trying figure out who to talk to, or which company I can approach to try to see if there are Grid/Cloud Computing companies who have programs setup to deal with colleges. I'm dealing with a compsci course, and we're looking at a few projects that would require a great deal of computing/computational resources. But in calling different companies (HP/Rackspace/etc..) I'm either not getting through to the right depts, or to the right people, or the companies just aren't setup for this. There are plenty of companies who have discounts for desktop software/hardware, but who in the biz deals with discounts/offerings for Cloud/Grid Computing solutions?? Any thoughts/pointers would be greatly appreciated. Thanks -tom

  Read the article

• How do I recover/reset the admin password of a Virtual PC instance

  - by Jeff Bloom

  I was given a VPC file which belonged to an employee who left our company. The VPC has important code and data. Anyways, I started up the instance in Microsoft Virtual PC 2007, but can't logon because we don't know any user names or passwords for the machine. How can I reset the Administrator password on the virtual machine?

  Read the article

• Issues Installing PHP Memcache module

  - by smith

  I am trying to install memcache on my VPS. When I type $ pecl install memcache I get this error checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. ERROR: `/root/tmp/pear/memcache/configure --enable-memcache-session=yes' failed Any ideas what the issue could be?

  Read the article

• Takeaways From CSO Roundtable New York

  - by Naresh Persaud

  Thanks to everyone who attended the Chief Security Officer Roundtable in New York last week. We were lucky to have Dennis Brixus, CSO of McGraw-Hill  as a guest speaker. In addition, Jeff Henley, provided a board level perspective on security. Amit Jasuja discussed Oracle's security formula.  A few takeaways from Jeff's talk that were interesting: Security is a board level issue. The challenge at the board level is that boards have short attention span. The CSO needs to be vigilant in educating the board on the strategic importance of security. Every CSO needs to think about cost. The CSO has to look at the economics of security and demonstrate fiduciary responsibility. We have to think of security as a business enabler. Security is the enabler that helps us expand into new markets and connect better with our customers and partners. While the CSO can't prevent every threat, we have to expect the CSO to have a plan. Oracle security-formula View more PowerPoint from OracleIDM

  Read the article

• Migrating XenServer VMs from Intel to AMD servers

  - by John Smith

  I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

  Read the article

• Lost P/W Tape Backup

  - by Jeff Rawlins

  We need to perform complete restore to critical server using tape backup (Veritas). Found out that former IT director put p/w on tape and we cannot locate or figure it out. Options for recovery?

  Read the article

• 2008 Sever Randomly reboots.

  - by Jeff

  I'm out of ideas here. We have a 2008 Server that keeps rebooting 2-3 times a day at completely random times with an "Unexpected Shutdown" event. There are no Dumps, no events leading to it just like it loses power then comes back online. I ran a Diagnostic of the power supply and it has had continuous power for months. In addition, the temperature of the processors are maxing out at 40 degrees Celsius. Anyone have any ideas how to figure out why this is restarting all the time? This is a DMZed Web server so it doesn't do too much process wise. Here are the specs: Host Name: ~~~ OS Name: Microsoft Windows Server 2008 R2 Standard OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Server OS Build Type: Multiprocessor Free Registered Owner: Windows User Registered Organization: Product ID: ~~~ Original Install Date: 5/27/2010, 4:25:47 PM System Boot Time: 2/14/2011, 5:35:01 PM System Manufacturer: HP System Model: ProLiant DL380 G6 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 26 Stepping 5 GenuineIntel ~1586 Mhz BIOS Version: HP P62, 8/16/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 4,086 MB Available Physical Memory: 2,775 MB Virtual Memory: Max Size: 8,170 MB Virtual Memory: Available: 6,691 MB Virtual Memory: In Use: 1,479 MB Page File Location(s): C:\pagefile.sys

  Read the article

• How to setup multiple Apache SSL sites using multiple IP addresses

  - by Jeff

  How do you setup a single Apache2 config to host multiple HTTPS sites each on their own IP address? There will also be multiple HTTP sites on just a single IP address. I do not want to use Server Name Indication (SNI) as described here, and I'm only concerned with the important top-level Apache directives. That is, I just need to know the skeleton of how my config should look. The basic setup looks like this: Hosted on 1.1.1.1:80 (HTTP) - example.com - example.net - example.org Hosted on 2.2.2.2:443 (HTTPS) - secure.com Hosted on 3.3.3.3:443 (HTTPS) - secure.net Hosted on 4.4.4.4:443 (HTTPS) - secure.org And here are the important config directives I have so far, which is the closest I've come to a working iteration, but still no dice. I know I'm close, just need a little push in the right direction. Listen 1.1.1.1:80 Listen 2.2.2.2:443 Listen 3.3.3.3:443 Listen 4.4.4.4:443 NameVirtualHost 1.1.1.1:80 NameVirtualHost 2.2.2.2:443 NameVirtualHost 3.3.3.3:443 NameVirtualHost 4.4.4.4:443 # HTTP VIRTUAL HOSTS: <VirtualHost 1.1.1.1:80> ServerName example.com DocumentRoot /home/foo/example.com </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.net DocumentRoot /home/foo/example.net </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.org DocumentRoot /home/foo/example.org </VirtualHost> # HTTPS VIRTUAL HOSTS: <VirtualHost 2.2.2.2:443> ServerName secure.com DocumentRoot /home/foo/secure.com SSLEngine on SSLCertificateFile /home/foo/ssl/secure.com.crt SSLCertificateKeyFile /home/foo/ssl/secure.com.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 3.3.3.3:443> ServerName secure.net DocumentRoot /home/foo/secure.net SSLEngine on SSLCertificateFile /home/foo/ssl/secure.net.crt SSLCertificateKeyFile /home/foo/ssl/secure.net.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 4.4.4.4:443> ServerName secure.org DocumentRoot /home/foo/secure.org SSLEngine on SSLCertificateFile /home/foo/ssl/secure.org.crt SSLCertificateKeyFile /home/foo/ssl/secure.org.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> For what it's worth, I prefer to have each of my SSL sites on their own IP instead of including one of them on the primary VHOST IP. Any links which show a standard setup would be more than welcome!

  Read the article

• Loading dependencies for custom puppet functions

  - by Ben Smith

  I have written a custom puppet function, which is working fine, that depends on the cloudservers gem (a Rackspace client library). This is fine if I have pre-installed the gem on a server before running puppet but totally breaks if I have not installed the gem as the function seems to be run during the 'compilation' sweep, well before my package definition is realised. Here's what my .pp looks like, with get_hosts the function that requires the cloudservers gem. package { "rubygems": ensure => installed, provider => "gem"; } package { "cloudservers": ensure => installed, provider => "gem", require => Package["rubygems"]; } class hosts::us { $hosts = get_hosts("us") hostentry { $hosts: } } define hostentry() { $parts = split($name, ',') $address = $parts[0] $ip = $parts[1] $aliases = $parts[2] host{ $address: ip => $ip, host_aliases => $aliases } } Is there a way to stop the function getting run so early, or at least having it's run depend up the library being installed. Alternatively, is there a way that I can add dependencies somewhere in the functions folder that will be available to the function?

  Read the article

• Server 2008 Active Directory DNS Entries Deleted. Dcdiag unable to contact local AD controller.

  - by Jim Smith

  I've never seen anything like this. At a potential customer site, I noticed that the PC's were all unable to locate the domain controller and netlogon was failing. I fixed the DNS entries on the client PC's so the AD server was DNS server and tried to rejoin the domain. The PC was unable to locate the domain controller. On the server, I checked the DNS settings and while there is the high level AD folder, every single entry related to Active Directory appears to have been completely deleted. There are no backups from what I can tell and this has been happening for 6 months at least. Does anyone have any recommendations for repairing this? Thanks.

  Read the article

• Move the Start Menu in Windows 7 Taskbar

  - by Aaron Smith

  Is there anyway to move the Start Menu button on the taskbar in Windows 7? I've decided to try moving the taskbar to the left so I have more vertical screen real estate, but I would like the start menu to be at the bottom of the bar. Is there anyway to move it?

  Read the article

• Question about Installing an Intel E5300 CPU.

  - by jeff

  Can I re-use my heatsink/fan that is currently on the motherboard with this new Intel e5300 CPU ? I know both CPUs are socket 775 based CPUs. I have a 2.4 GZ single core Intel chip currently. Also would I be able salvage the thermal paste or should I just buy new paste?

  Read the article

• What is this dm-0 device?

  - by Jeff Shattock

  While poking around trying to figure out why a Linux - Linux file transfer is running slower than I think it should, I stumbled across something I'm not familiar with. /dev/dm-0 seems to be my bottleneck, but I have no idea what it is. On my destination server, the iostat command shows a device at the bottom, /dev/dm-0, as being 100% utilized. This server has 6 disks in a mdadm raid5 set, with LVM running on top of it. Each of the underlying disks are sitting around 50% util. The transfer is writing to a logical volume located on this raidset. What is this /dev/dm-0 thing? Once I know what it is, maybe I can find how to increase its speed, or at least understand why its the speed that it is.

  Read the article

• Utilize different region format for a single application on Mac OS X

  - by Jeff Hellman

  Is there a way to have a single Mac OS X application utilize a different region format than the system default? For example, I'd like to keep my system operating in English with US date formats but have my lesson planning software utilize French date formats. If I put my entire computer into French mode, I get the desired results, but I'd rather keep my entire system in US mode and have the Planbook application work with French region formats. I know about Language Switcher but that only allow per-app selections of localizations to be used, not which date format to use. I don't care about having the French localization of Planbook appear, I just want the date format to be French.

  Read the article

• How to set minimum SQL Server resource allocation for a database?

  - by Jeff Widmer

  Over the past Christmas holiday week, when the website I work on was experiencing very low traffic, we saw several Request timed out exceptions (one on each day 12/26, 12/28, 12/29, and 12/30) on several pages that require user authentication. We rarely saw Request timed out exceptions prior to this very low traffic week. We believe the timeouts were due to the database that it uses being "spun down" on the SQL Server and taking longer to spin up when a request came in. There are 2 databases on the SQL Server (SQL Server 2005), one which is specifically for this application and the other for the public facing website and for authentication; so in the case where users were not logged into the application (which definitely could have been for several hours at a time over Christmas week) the application database probably received no requests. We think at this point SQL Server reallocated resources to the other database and then when a request came in, extra time was needed to spin up the application database and the timeout occurred. Is there a way to tell SQL Server to give a minimum amount of resources to a database at all times?

  Read the article

• Operating altitude for a MacBook Pro?

  - by Jeff Meatball Yang

  I saw on the Apple website that the MacBook pro has a maximum operating altitude. Maximum operating altitude: 10,000 feet Does this mean that I should not use it on a plane? Or is this just a slick way for Apple to say, "It's not our fault if you use it on a plane and it breaks."

  Read the article

• How to install software packages on a shared Red Hat Linux host account without root access or rpm?

  - by jeff

  I have a shared RHEL 4 host account where I do not have root privileges. I would like to install Git and Bash Complete in a way that they can be upgraded easily. To date, I've just been installing from source providing $HOME as a prefix to autoconf. Obviously this isn't ideal as I need to hunt down the files associated with the version I'm upgrading away from and delete them. I've tried using rpm but I just get -bash: rpm: command not found back so it's not available. I also looked into checkinstall but it looks like that requires rpm, dpkg, or Slackware's package manager to be available. Is there anything out there that can be used like a package manager without requiring root access or an existing package manager?

  Read the article

• Simultaneous read/write to RAID array slows server to a crawl

  - by Jeff Leyser

  Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >