Search Results

Search found 1031 results on 42 pages for 'subnet'.

Page 26/42 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Windows 7 Utlimate x64 - No Internet access

  - by rafek

  I've just installed Windows 7 Ultimate x64. As all of my computers at home I've connected to my router via wifi (open/wep). And what has happened is that Wireless Connection is Connected but with No Internet access -- my ipconfig says: Autoconfiguration IPv4 Address : 169.254.33.161 Subnet Mask : 255.255.0.0 Default Gatewawy : (empty) After ipconfig /renew I get: An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. [..] I'm looking for a solution for 2 hours now...

  Read the article

• pfSense - DHCP Relay

  - by Patrick

  I have 3 pfSense boxes acting as routers on a single subnet (172.22.12.0/26). Router A - 172.22.12.1 Router B - 172.22.12.17 Router C - 172.22.12.33 I want Router A to be the only DHCP server. Router C has DHCP relay enabled that points to Router B. Router B then has DHCP relay enabled that points to Router A. Like this: Router C -- Router B -- Router A (DHCP Server) Router B gets an IP from Router A, but Router C does not. Any ideas why this configuration isn't working? Thanks.

  Read the article

• Multiple test Active Directory envirovments hand in hand with production domain controllers

  - by MadBoy

  What's the best approach of having multiple test environments next to production one? We have multiple programming teams that build solutions that use Active Directory very often. We have tried different approaches, starting with their own domain controllers (in same subnet), or additional OU's in our production AD that the team gets control over and can create/delete accounts within that one OU. We thought of possible 4 solutions: Setting up separate OU's in ou production env. Creating subdomains for our contoso.com domain like test.contoso.com, something.contoso.com and delegating control to the teams (would we need additional DC's or the two that we have already would be enough to hold this? Setting up additional test domain controler that has a trust to our main domain and all teams can use the test domain controler as they please. Setting up single domain controller for every team/project. We're taking in consideration amount of resources needed, security (for example having multiple domain controlers with multiple passwords may lead users to use simpler passwords) and overall best practices for this scenario.

  Read the article

• How to to specify network address for a dhcp client

  - by drecute

  I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• APIPA ip address in server 2003 dns for (same as parent folder record) can anyone suggest why this i

  - by dasko

  have a server 2003 domain controller i have installed active directory integrated dns under the forward lookup zone for domain_name.local i see an APIPA ip address that is set for (same as parent folder) with ip number 169.x.x.x looks like (same as parent folder) Host A 169.x.x.x (apipa subnet range) problem is, from other forums that i have read, that this is due to dual nics and one on that is not getting a dynamic or static ip address BUT... I only have one nic in this server? where could this be coming from and could it mess up other settings or not allowing the DC to be contacted? i am just wondering what symptoms could arise due to the record being there. any help would be greatly appreciated thanks.

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• DHCPOFFER delay VLAN

  - by john883

  I have configured two VLANs [ 15 and 16 ] and a trunkport on a Cisco Catalyst 2960. The trunkport is connected to eth2 on a Linux server The server is configured to support VLAN's and the interfaces eth2.15 eth2.16 is configured with ip addresses on two different subnet. dhcp3-server is running on the same server and hands out IP-addresses to the VLANs. When connecting a client to a port that is configured in ex. VLAN 15 and requesting a IP-address, i experience a long delay before recieving a DHCPOFFER, around 30 seconds or so, the client needs to send a DHCPDISCOVER about five times but will always recieve a DHCPOFFER. Any suggestion why this delay is happening?

  Read the article

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• Best way to script checking whether a machine is on the corporate network

  - by Ben

  I am writing a Powershell script to determine if a machine is on the corporate network. The machine may or may not be on the domain, so I want to check at "IP" level. Have written something to check by pinging a couple of servers on a couple of different subnets (to get around the risk of someone being on another (external) subnet with a host on the same IP.) Works, but it's a bit slow, and not especially "future-proof" - e.g. in 2 years time when I decomission the server it'll break. Is there a way I can use the dns suffix being given by the local dhcp server? Just direct me what I need to check - I can figure out the script. Ta, Ben

  Read the article

• ipconfig /release not working, why?

  - by barlop

  ipconfig /release is not working, why is that? here is a sequence where I put my cable in get an IP, try ipconfig /release and it tells me it can't release wireless, but there is no wireless connection. i'm just trying to release the wired one. C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Fine so I plug my cable in C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . : C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.8 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 Fine so from above, it clearly has an iP C:\>ipconfig /release Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its me dia disconnected. C:\>

  Read the article

• Set up Windows SBS dns server and vpn clients from brench office

  - by mn

  I have got some clients from bench office which connects vpn to main office. The Router from bench office assigned addresses from DHCP 192.168.1.0/255.255.255.0 and remote gateway assigned vpn ip addresses 10.10.20.0/255.255.255.0. There is a DNS server (Active Directory Win SBS 2000) and vpn client are registered with vpn address (10.10.20.0/255.255.255.0 and domain company.com.pl). I would like to register also primary bench subnet 192.168.1.0/255.255.255.0 with domain for example company.vpn.local I want to access vpn hosts for example: dev3.copmany.pkb.local and dev3.company.com using my Win SBS 2000 DNS server.

  Read the article

• Tracking costs within one AWS account

  - by caius howcroft

  I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

  Read the article

• Cisco 1841 Box and Watchguard XTM21-W

  - by Corey

  I have never set one of these up before and need a little assistance. Right now we have a T1 line coming in from Sprint to a Cisco 1841 and then on to our router. However, when I plug the Cisco 1841 into Port 0 and the router into Port 3 it does not work. In Port 1 I have my management computer plugged in. We have one subnet and this must be easy but I cannot figure out how to make this work. When the firewall is plugged in then I get no internet or network access.

  Read the article

• Prevent users from Router 2 seeing Router 1 computers

  - by Patrick Robert Shea O'Connor

  I've got 2 Netgear N300 (WNR2000v3) routers. Here's my setup: Modem Router 1 Private Users/Router 2 Public Wireless Users on "Guest" Network. I want to prevent users who are connected to Router 2's "Guest" network from accessing anything that is connected to Router 1. There is an option when setting up the "Guest" network called "Allow guest to access My Local Network" which I thought if unchecked would do this very thing; however, I can still access files and such of computers connected to Router 1. Router 1 assigns 192.0.0.x IP addresses, Router 2 assigns 10.0.0.x IP addresses, how can they even see each other? Do I need to change the subnet or something else?

  Read the article

• IPsec VPN tunnel between Windows 2008 R2 and CISCO ASA?

  - by antur123

  I need to create a VPN IPsec tunnel between my Windows 2008 R2 server and a CISCO ASA device. I want my server to be both the end of the tunnel, and the server that connects to the other side (no need to connect a whole subnet, just the server would be fine). I found this article that seems to do the trick, but there are two differences: As mentioned above, the computer behind my end is the server itself. Can that be configured? (i.e. make the "computers in endpoint 1" IP address be the same than "local tunnel computer"). This article is for Juniper ScreenOS, not for CISCO ASA, though configurations look very similar. Would that configuration work for me?

  Read the article

• Can only access asp.net app on localhost

  - by Kevin Donn

  I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• ASA5500 series logging for management interface in transparent mode

  - by ANervousTwitch

  i have a cisco asa5520 in transparent mode. the interface is on the same subnet as some windows machines, which are generating a lot of broadcast traffic that is filling up the logs. is there any way to have it not log that its blocking those packets? its a bunch of these messages: "through-the-device packet to from management-only network is denied: udp src..." im also seeing some of those zeroconf requests that id like to drop logging for. i tried to just put a rule on the management interface, but apparently thats not allowed.

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• Use HAProxy or Nginx to Load Balance between VPS

  - by xperator

  I want to load balance + failover backup multiple vps webservers hosted on different providers. I heard that for HAProxy you need multiple server under the same subnet, plus a shared (virtual) ip address between load balancers. But it's not possible in my case cause every VPS is on different node/network. Is there a way to use HAProxy in this kind of setup ? ( Please explain how briefly, I don't want to hear your "YES" answer ) What about NginX? Is it possible to achieve same result with Nginx ? (when servers are located on different nets) I know about Round Rubin DNS, but it doesn't provide a real failover solution, neither a load balance between servers.

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >