mysql insert id - Page 260

Can I force MySQL to output results before query is completed?

- by Gordon Royle

I have a large MySQL table (about 750 million rows) and I just want to extract a couple of columns. SELECT id, delid FROM tbl_name; No joins or selection criteria or anything. There is an index on both fields (separately). In principle, it could just start reading the table and spitting out the values immediately, but in practice the whole system just chews up memory and basically grinds to a halt. It seems like the entire query is being executed and the output stored somewhere before ANY output is produced... I've searched on unbuffering, turning off caches etc, but just cannot find the answer. (mysqldump is almost what I want except it dumps the whole table - but at least it just starts producing output immediately)

Read the article

MySQL - Find entries that refer to a specified index.

- by Conor H

Hi, So I have a booking system where I have a 'lesson_type' table with 'lesson_type_id' as PK. I have a constraint in place here so I can't delete a lesson_type if there are bookings made for that lesson_type. I would like to be able to determine if this lesson_type_id is being referred to by any entries in the bookings table (or any other table for that matter) so I can notify the user gracefully. i.e. not have a mysql error be thrown when they try and delete a record. What kind of query would I use for this? Thanks.

Read the article

I am having common field in ten tables with different field name. How should i get that using mysql

- by Fero

Hi all, I am having a common field in ten tables with different field name. example: table1: t1_id t1_location 1 india 2 china 3 america table2: t2_id t2_location 4 london 5 australia 6 america Now my o/p should be: location india china america london australia How should i get that using mysql query. thanks in advance

Read the article

Mysql configuration errror : using password (NO) instead of YES.

- by Tristan

Hello, I try to connect mysql via PHPMYADMIN, using my password, but it can't stop telling me that (access denied, using password NO) but i'm using a password :O When i connect via the console with my password, it works but not on phpmyadmin. It's really weird. Do you have an idea to fix that ? edit: it worked couple of days ago, because i created 2 databases and 2 users via phpmyadmin... Thanks edit : When i'm using CHROME it's working unless FireFox ... any ideas ?

Read the article

Change master table PK and update related table FK (changing PK from Autoincrement to UUID on Mysql)

- by eleonzx

I have two related tables: Groups and Clients. Clients belongs to Groups so I have a foreign key "group_id" that references the group a client belongs to. I'm changing the Group id from an autoincrement to a UUID. So what I need is to generate a UUID for each Group and update the Clients table at once to reflect the changes and keep the records related. Is there a way to do this with multiple-table update on MySQL? Adding tables definitions for clarification. CREATE TABLE `groups` ( `id` char(36) NOT NULL, `name` varchar(255) DEFAULT NULL, `created` datetime DEFAULT NULL, `modified` datetime DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8$$ CREATE TABLE `clients` ( `id` char(36) NOT NULL, `name` varchar(255) NOT NULL, `group_id` char(36) DEFAULT NULL, `active` tinyint(1) DEFAULT '1' PRIMARY KEY (`id`), KEY `fkgp` (`group_id`), CONSTRAINT `fkgp` FOREIGN KEY (`group_id`) REFERENCES `groups` (`id`) ON DELETE NO ACTION ON UPDATE CASCADE ) ENGINE=InnoDB DEFAULT CHARSET=utf8$$

Read the article

MySQL & NHibernate. How fix the error: Column 'ReservedWord' does not belong to table ReservedWords?

- by Eduardo Xavier

"I am getting a weird error when using NHibernate. And I don't know what is causing this error. I am new to the whole Visual Studio and NHibernate, but not to Hibernate. I used Hibernate in the past in Java projects. Any help would be appreciated in pointing me where my error is. I am using Visual Studio 2008 SP1 with Mysql 5.1. Below is the code I am using. " The full code and examples are posted here: https://forum.hibernate.org/viewtopic.php?f=25&t=997701

Read the article

Setting an empty default value for a char-column in MySQL?

- by user281434

Hi In phpMyAdmin I have a char(32) column that has no default value(ie. Default: None). When I try to insert data through a SQL query, it throws out an error saying that the column "doesn't have a default value". I need it to be empty, so instead I've just set it's default value as "As defined: " and then nothing in the value field. Is this a bad idea? And is it any better than simply throwing in an empty value for the column in the SQL query? Thanks for your time.

Read the article

How can i see how many mysql connections are opend ?

- by Sahal

How can i see how many number of connections are opened in one request. (mysql_connect) I know that if i call mysql_connect function 100 times, function will return the connection link which is already opened only if parameters of the function is same. It will not request for new connection if connection is already exists. But i just want to make sure mysql_connect is not requesting new. I am working with a legacy system which contains so many "mysql_connect" function. Is there any setting in apache or is there any way i can log this number of connection value in apache or mysql log file? Please help.

Read the article

MySQL null/empty-string too long for VarChar(5) ?

- by rlb.usa

I have a stored procedure that takes an input var_zip varchar(5). My webapp calls this procedure and gives it the parameter: cmd.Parameters.Add(new MySqlParameter("var_Zip", MySqlDbType.VarChar, 5)); cmd.Parameters["var_Zip"].Value = txtZip.Text; txtZip is empty. So it is either giving empty string '', or null. Doesn't matter to me which. But it is throwing an error: MySql.Data.MySqlClient.MySqlException: Data too long for column 'var_Zip' at row 1 What's going on and how can I fix it? I don't understand.

Read the article

PHP - MySQL how to delete an image when a user submits a new image problem.

- by pc-wiki

I'm trying to delete the current image that is already set on the server when a user submits a new image to the server, but I don't know how to do add this to my current code can some one please help me? Here is my PHP & MySQL code. if(isset($_FILES["thumb"]["name"])) { if (file_exists("/images/" . $_FILES["thumb"]["name"])) { $thumb != $_FILES["thumb"]["name"]; } else if($_FILES["thumb"]["name"] == TRUE) { move_uploaded_file($_FILES["thumb"]["tmp_name"], "/images/" . mysqli_real_escape_string($mysqli, htmlentities(strip_tags(basename($_FILES["thumb"]["name"]))))); $thumb = mysqli_real_escape_string($mysqli, htmlentities(strip_tags(basename($_FILES["thumb"]["name"])))); } if($thumb == TRUE) { //create thumb code here... } }

Read the article

How to change particular column entries in a mysql table when uploading data from csv file?

- by understack

I upload data into a mysql table from csv file in a standard way like this: TRUNCATE TABLE table_name; load data local infile '/path/to/file/file_name.csv' into table table_name fields terminated by ',' enclosed by '"' lines terminated by '\r\n' (id, name, type, deleted); All 'deleted' column entries in csv file has either 'current' or 'deleted' value. Question: When csv data is being loaded into table, I want to put current date in table for all those corresponding 'deleted' entries in csv file. And null for 'current' entries. How can I do this? Example: csv file: id_1, name_1, type_1, current id_2, name_1, type_2, deleted id_3, name_3, type_3, current Table after loading this data should look like this: id_1, name_1, type_1, null id_2, name_1, type_2, 2010-05-10 id_3, name_3, type_3, null Edit Probably, I could run another separate query after loading csv file. Wondering if it could be done in same query?

Read the article

[C# n MySQL] Creating a database using Connector/NET Programming?

- by yeeen

How to create a database using connector/net programming? How come the following doesn't work? string connStr = "server=localhost;user=root;port=3306;password=mysql;"; MySqlConnection conn = new MySqlConnection(connStr); MySqlCommand cmd; string s0; try { conn.Open(); s0 = "CREATE DATABASE IF NOT EXISTS `hello`;"; cmd = new MySqlCommand(s0, conn); conn.Close(); } catch (Exception e) { Console.WriteLine(e.ToString()); }

Read the article

MySQL UPDATE WHERE IN for each listed value separately?

- by Tom

Hi, I've got the following type of SQL: UPDATE photo AS f LEFT JOIN car AS c ON f.car_id=c.car_id SET f.photo_status=1 , c.photo_count=c.photo_count+1 WHERE f.photo_id IN ($ids) Basically, two tables (car & photo) are related. The list in $ids contains unique photo ids, such as (34, 87, 98, 12). With the query, I'm setting the status of each photo in that list to "1" in the photo table and simultaneously incrementing the photo count in the car table for the car at hand. It works but there's one snag: Because the list can contain multiple photo ids that relate to the same car, the photo count only ever gets incremented once. If the list had 10 photos associated with the same car, photo_count would become 1 .... whereas I'd like to increment it to 10. Is there a way to make the incrementation occur for each photo individually through the join, as opposed to MySQL overthinking it for me? I hope the above makes sense. Thanks.

Read the article

Create ordering in a MySQL table without using a number (because then it's hard to put something in

- by user347256

I have a long list of items (say, a few million items) in a mysql table, let's call it mytable and it has the field mytable.itemid. The items are given an order, and can be re=ordered by the user by drag and drop. If I add a field called mytable.order and just put numbers in them, it creates problems: what if I want to move an item between 2 other items? Then all the order fields have to be updated? That seems like a nightmare. Is there a (scalable) way to add order to a table that is different from just giving every item a number, order by that, and do loads of SQL queries everytime the order is changed?

Read the article

How to create a snapshot or clone of PHP, MySQL page... Inspiration needed

- by jimbo

Hi, We have a web application that creates a dynamic PHP page with all the MySQL stored details a user has entered via a number a forms. So far so good, but we want this information stored some how to be refereed to at a later date, as an administrator can make changes to the data, which reflects on calculations that are worked out from this saved data. When going back over this saved data we need to be able to see all the information submitted for that particular calculation, so if that data has changed we will see what is was relating to that calculation. Now we have thought about maybe a snapshot when the calculation is done, pdf of the webpage or something similar would do, but is this simple to do? I hope this makes sense...

Read the article

Best practices for storing & selecting time/date with php & mysql?

- by Adam

I often find myself storing data in a mysql database, and then wanting to display all sorts of stats about my data, specifically stuff like 'how many rows do I have for this date, or that date'. Does anyone know of (or could write) a good tutorial on this subject? Ideally a good tutorial would overview: Best practices when storing the data (i.e. what formats to use, how to use them servertime vs. generated time, etc.) Best practices when selecting data from the database with php (i.e. how to sort rows by date, how to retrieve only rows from a certain date, or a certain hour, etc).. Timezones and other issues that might come up. Thanks in advance.

Read the article

How do I select the most recent entry in mysql?

- by ggfan

i want to select the most recent entry from a table and see if that entry is exactly the same as the one the user is trying to enter. How do I do a query to "select * from the most recent entry of 'posting'"? $query="Select * FROM //confused here (SELECT * FROM posting ORDER BY date_added DESC) WHERE user_id='{$_SESSION['user_id']}' AND title='$title' AND price='$price' AND city='$city' AND state='$state' AND detail='$detail' "; $data = mysqli_query($dbc, $query); $row = mysqli_fetch_array($data); if(mysqli_num_rows($data)>0) { echo "You already posted this ad. Most likely caused by refreshing too many times."; echo "<br>"; $linkposting_id=$row['posting_id']; echo "See the <a href='ad.php?posting_id=$linkposting_id'>Ad</a>"; } else { ...insert into the dbc }

Read the article

What is the best practise for relational database tables in mysql?

- by George

Hi, I know, there is a lot of info on mysql out there. But I was not really able to find an answer to this specific and actually simple question: Let's say I have two tables: USERS (with many fields, e.g. name, street, email, etc.) and GROUPS (also with many fields) The relation is (I guess?) 1:n, that is ONE user can be a member of MANY groups. What I dis, is create another table, named USERS_GROUPS_REL. This table has only two fields: us_id (unique key of table USERS) and gr_id (unique key of table GROUPS) In PHP I do a query with join. Is this "best practice" or is there a better way? Thankful for any hint!

Read the article

Kubuntu 12.04 - Touchpad and keyboard stopped working at random

- by StepTNT

As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

Read the article

Convenience of mySQL over xml

- by Bonechilla

Currently I use XML to store specific information to correctly load a few things such as a list of specfied characters, scenes and music, Once more I use JAXB in combination with standard compression/decompression(ZIP) functionality to store a list of extrenous data. This data is called to add functionality to the character, somewhat like Skills in an RPG. Each skill is seperated into its own XML file with a grandlist which contains the names of each file with their extensions omitted and zipped in folder that gets encrypted. At first using xml was working fine however as the skill list grow i worry about its stability. I was wondering if I should begin storing the data in mySQL. Originally I planned to simply convert everything to JSON over xml but i think possibly mySQL would be a better move. Can anyone inform me of the key difference and pros and cons of each I guess i'm looking for the best way to store the data more conviently and would be easier to operate on. The data is mostly primatives and strings and the only arraylist of values i have i can just concat into a single field and parse later Edit: If I am going in the right direction with XML would it make sense to convert it to JSON and use maybe Kyro or EclipseLink JAXB (MOXy)

Read the article

Convience of mySQL over xml

- by Bonechilla

Currently I use XML to store specific information to correctly load a few things such as a list of specfied characters, scenes and music, Once more I use JAXB in combination with standard compression/decompression(ZIP) functionality to store a list of extrenous data. This data is called to add functionality to the character, somewhat like Skills in an RPG. Each skill is seperated into its own XML file with a grandlist which contains the names of each file with their extensions omitted and zipped in folder that gets encrypted. At first using xml was working fine however as the skill list grow i worry about its stability. I was wondering if I should begin storing the data in mySQL. Originally I planned to simply convert everything to JSON over xml but i think possibly mySQL would be a better move. Can anyone inform me of the key difference and pros and cons of each I guess i'm looking for the best way to store the data more conviently and would be easier to operate on. The data is mostly primatives and strings and the only arraylist of values i have i can just concat into a single field and parse later

Read the article

Quick Fix for GlassFish/MySQL NoPasswordCredential Found

- by MarkH

Just the other day, I stood up a GlassFish 3.1.2 server in preparation for a new web app we've developed. Since we're using MySQL as the back-end database, I configured it for MySQL (driver) and created the requisite JDBC resource and supporting connection pool. Pinging the finished pool returned a success, and all was well. Until we fired up the app, that is -- in this case, after a weekend. Funny how things seem to break when you leave them alone for a couple of days. :-) Strangely, the error indicated "No PasswordCredential found". Time to re-check that pool. All the usual properties and values were there (URL, driverClass, serverName, databaseName, portNumber, user, password) and were populated correctly. Yes, the password field, too. And it had pinged successfully. So why the problem? A bit of searching online produced enough relevant material to offer promise. I didn't take notes as I was investigating the cause (note to self), but here were the general steps I took to resolve the issue: First, per some guidance I had found, I tried resetting the password value to nothing (using () for a value). Of course, this didn't fix anything; the database account requires a password. And when I tried to put the value back, GlassFish politely refused. Hmm. I'd seen that some folks created a new pool to replace the "broken" one, and while that did work for them, it seemed to simply side-step the issue. So I deleted the password property - which GlassFish allowed me to do - and restarted the domain. Once I was back in, I re-added the password property and its value, saved it, and pinged...success! But now to the app for the litmus test. The web app worked, and everything and everyone was now happy. Not bad for a Monday. :-D Hope this helps, Mark

Read the article

Getting java.lang.ClassNotFoundException: com.mysql.jdbc.Driver Exception

- by Yashwant Chavan

Hi , I am getting Following Exception while configuring the Connection Pool in Tomcat This is Context.xml <Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">       <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="root" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql:///BUSINESS"/> </Context> This is Bean Entry <bean id="dataSource" class="org.springframework.jndi.JndiObjectFactoryBean"> <property name="jndiName" value="jdbc/TestDB"></property> <property name="resourceRef" value="true"></property> </bean> org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Co nnection; nested exception is org.apache.tomcat.dbcp.dbcp.SQLNestedException: Ca nnot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:82) at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java: 382) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:45 8) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:46 6) at com.businesscaliber.dao.Dao.getQueryForListMap(Dao.java:66) at com.businesscaliber.dao.MiscellaneousDao.getDefaultSucessStory(Miscel laneousDao.java:109) at com.businesscaliber.listeners.BusinessContextLoader.contextInitialize d(BusinessContextLoader.java:40) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3795) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 252) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:760) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:74 0) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:831) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:720 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :311) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:120) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022) at org.apache.catalina.core.StandardHost.start(StandardHost.java:736) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:4 48) at org.apache.catalina.core.StandardServer.start(StandardServer.java:700 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:552) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433) Caused by: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driv er class 'com.mysql.jdbc.Driver' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1136) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSo urce.java:880) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(D ataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:79) ... 30 more Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:164) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1130)

Read the article

Multiple database connection in Rails

- by Sanal

I'm using active_delegate for multiple connection in Rails. Here I'm using mysql as master_database for some models,and postgresql for some other models. Problem is that when I try to access the mysql models, I'm getting the error below! Stack trace shows that, it is still using the postgresql adapter to access my mysql models! RuntimeError: ERROR C42P01 Mrelation "categories" does not exist P15 F.\src\backend\parser\parse_relation.c L886 RparserOpenTable: SELECT * FROM "categories" STACKTRACE =========== d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract_adapter.rb:212:in `log' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/postgresql_adapter.rb:507:in `execute' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/postgresql_adapter.rb:985:in `select_raw' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/postgresql_adapter.rb:972:in `select' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/database_statements.rb:7:in `select_all_without_query_cache' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/query_cache.rb:60:in `select_all' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/query_cache.rb:81:in `cache_sql' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/query_cache.rb:60:in `select_all' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:661:in `find_by_sql' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:1553:in `find_every' d:/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:615:in `find' D:/ROR/Aptana/dedomenon/app/models/category.rb:50:in `get_all_with_exclusive_scope' D:/ROR/Aptana/dedomenon/app/models/category.rb:50:in `get_all_with_exclusive_scope' D:/ROR/Aptana/dedomenon/app/controllers/categories_controller.rb:48:in `index' here is my database.yml file postgre: &postgre adapter: postgresql database: codex host: localhost username: postgres password: root port: 5432 mysql: &mysql adapter: mysql database: project host: localhost username: root password: root port: 3306 development: <<: *postgre test: <<: *postgre production: <<: *postgre master_database: <<: *mysql and my master_databse model is like this class Category < ActiveRecord::Base delegates_connection_to :master_database, :on => [:create, :save, :destroy] end Anyone has any solution??

Read the article

Using a class within a class?

- by Josh

I built myself a MySQL class which I use in all my projects. I'm about to start a project that is heavily based on user accounts and I plan on building my own class for this aswell. The thing is, a lot of the methods in the user class will be MySQL queries and methods from the MySQL class. For example, I have a method in my user class to update someone's password: class user() { function updatePassword($usrName, $newPass) { $con = mysql_connect('db_host', 'db_user', 'db_pass'); $sql = "UPDATE users SET password = '$newPass' WHERE username = '$userName'"; $res = mysql_query($sql, $con); if($res) return true; mysql_close($con); } } (I kind of rushed this so excuse any syntax errors :) ) As you can see that would use MySQL to update a users password, but without using my MySQL class, is this correct? I see no way in which I can use my MySQL class within my users class without it seeming dirty. Do I just use it the normal way like $DB = new DB();? That would mean including my mysql.class.php somewhere too... I'm quite confused about this, so any help would be appreciated, thanks.

Search Results

Search found 49789 results on 1992 pages for 'mysql insert id'.

Page 260/1992 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >

- by Gordon Royle

- by Conor H

- by Fero

- by Tristan

- by eleonzx

- by Eduardo Xavier

- by user281434

- by Sahal

- by rlb.usa

- by pc-wiki

- by understack

- by yeeen

- by Tom

- by user347256

- by jimbo

- by Adam

- by ggfan

- by George

- by StepTNT

- by Bonechilla

- by Bonechilla

- by MarkH

- by Yashwant Chavan

- by Sanal

- by Josh

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >