Search Results

Search found 11618 results on 465 pages for 'rescue mode'.

Page 260/465 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

• virtualbox ftp hangs on list command

  - by Tiddo

  Hi all, I have virtual box installed on a windows 7 64-bit computer, with Cent OS 5.5 as guest os. I want to be able to use ftp between those. I've installed vsftpd on the guest os, and the guest os uses a nat connection with the host os for internet. So far, I am able to connect to the guest os using ftp (in filezilla), but after the list command is executed, nothing happens, until the command is timed out. This happens in both active and passive mode. I do have set a pasv_min/max_port in the vsftpd.conf file, listing is enabled, and the ports are redirected in virtualbox. Also the ftp_data_port is set to 20. I also tried setting the pasv_address, but I had to set it to 127.0.0.1, but than filezilla gives me this: Command: PASV Response: 500 OOPS: bad family Command: PORT 127,0,0,1,139,204 Response: 500 OOPS: child died Can someone help me with this?

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• In what way does non-"full n-key rollover" hinder fast typists?

  - by Michael Kjörling

  Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

  Read the article

• Who to run Marcomedia Projector executables on Windows 7?

  - by shinjin

  When I try to use an old app created using Macromedia Projector in Windows 7, it crashes after the first few screens. The same programs works fine on XP. I receive this error message after a few screens: Error A Fatal Error has occurred. Click OK to Quit. Pressing OK brings me a fresh one: Microsoft Visual C++ runtime Library This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. And finally I get a Macromedia Projector has stopped working message. I have already tried adjusting compatibility mode, or adding this program to the Data Execution Prevention exceptions, but none helped.

  Read the article

• Windows 2000 under Windows 7 Virtual PC not working correctly

  - by dave

  I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• Need help identiying a nasty rootkit in Windows

  - by goofrider

  I have a nasty rootkit that not tools seem to be able to idenity. I know for sure it's a rootkit, but I can figure out which rootkit it is. Here's what I gathered so far: It creates multiple copies of itself in %HOME%\Local Settings\Temp with names like Q.EXE, IAJARZ.exe, etc., and install them as hidden services. These EXE have SysInternals identifiers in them so they're definitely rootkits. It hooked very deep in the system, including file read/write, security policies, registry read/write, and possibly WinSock/TCP/IP. When going to Sophos.com to download their software, the rootkit inject something called Microsoft Ajax Tootkit into the page, which injects code into the email submission form in order to redirect it. (EDIT: I might have panicked. Looks like Sophos does use an AJAZ email form, their form is just broken on Chrome so it looked like a mail form injection attack, the link is http://www.sophos.com/en-us/products/free-tools/virus-removal-tool/download.aspx ) Super-Antispyware found a lot of spyware cookies, in the name of .kaspersky.2o7.net, etc. (just chedk 2o7.net, looks like it's a legit ad company) I tried comparing DNS lookup from the infected systems and from system in other physical locations, no DNS redirections it seems. I used dd to copy the MBR and compared it with the MBR provided by ms-sys package, no differences so it's not infecting MBR. No antivirus or rootkit scanner be able to identify it. Most of them can't even find it. I tried scanning, in-situ (normal mode), in safe mode, and boot to linux live CD. Scanners used: Avast, Sophos anti rootkit, Kasersky TDSSKiller, GMER, RootkitRevealer, and many others. Kaspersky reported some unsigned system files that ought to be signed (e.g. tcpip.sys), and reported a number of MD5 mismatches. But otherwise couldn't identify anything based on signature. When running Sysinternal RootkitRevealer and Sophos AntiRootkit, CPU usage goes up to 100% and gets stucked. The Rootkit is blocking them. When trying running/installing HiJackThis, RootkitRevealer and some other scanners, it tells me system security policy prevent running/installing it. The list of malicious acitivities go on and on. here's a sample of logs from all my scans. In particular, aswSnx.SYS, apnenfno.sys and PROCMON20.SYS has a huge number of hooks. It's hard to tell if the rootkit replaced legit program files like aswSnx.SYS (from Avast) and PROCMON20.SYS (from Sysinternal Process Monitor). I can't find whether apnenfno.sys is from a legit program. Help to identify it is appreciated. Trend Micro RootkitBuster ------ [HIDDEN_REGISTRY][Hidden Reg Value]: KeyPath : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sptd\Cfg Root : 586bfc0 SubKey : Cfg ValueName : g0 Data : 38 23 E8 D0 BF F2 2D 6F ... ValueType : 3 AccessType: 0 FullLength: 61 DataSize : 32 [HOOKED_SERVICE_API]: Service API : ZwCreateMutant Image Path : C:\WINDOWS\System32\Drivers\aswSnx.SYS OriginalHandler : 0x8061758e CurrentHandler : 0xaa66cce8 ServiceNumber : 0x2b ModuleName : aswSnx.SYS SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwCreateThread Image Path : c:\windows\system32\drivers\apnenfno.sys OriginalHandler : 0x805d1038 CurrentHandler : 0xaa5f118c ServiceNumber : 0x35 ModuleName : apnenfno.sys SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwDeleteKey Image Path : C:\WINDOWS\system32\Drivers\PROCMON20.SYS OriginalHandler : 0x80624472 CurrentHandler : 0xa709b0f8 ServiceNumber : 0x3f ModuleName : PROCMON20.SYS SDTType : 0x0 HiJackThis ------ O23 - Service: JWAHQAGZ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\JWAHQAGZ.exe O23 - Service: LHIJ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\LHIJ.exe Kaspersky TDSSKiller ------ 21:05:58.0375 3936 C:\WINDOWS\system32\ati2sgag.exe - copied to quarantine 21:05:59.0217 3936 ATI Smart ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0342 3936 C:\WINDOWS\system32\BUFADPT.SYS - copied to quarantine 21:05:59.0856 3936 BUFADPT ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0965 3936 C:\Program Files\CrashPlan\CrashPlanService.exe - copied to quarantine 21:06:00.0152 3936 CrashPlanService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0246 3936 C:\WINDOWS\system32\epmntdrv.sys - copied to quarantine 21:06:00.0433 3936 epmntdrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0464 3936 C:\WINDOWS\system32\EuGdiDrv.sys - copied to quarantine 21:06:00.0526 3936 EuGdiDrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0604 3936 C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe - copied to quarantine 21:06:01.0181 3936 FLEXnet Licensing Service ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0321 3936 C:\Program Files\AddinForUNCFAT\UNCFATDMS.exe - copied to quarantine 21:06:01.0430 3936 OTFSDMS ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0492 3936 C:\WINDOWS\system32\DRIVERS\tcpip.sys - copied to quarantine 21:06:01.0539 3936 Tcpip ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0601 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - copied to quarantine 21:06:01.0664 3936 HKLM\SYSTEM\ControlSet003\services\TULPUWOX - will be deleted on reboot 21:06:01.0664 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - will be deleted on reboot 21:06:01.0664 3936 TULPUWOX ( UnsignedFile.Multi.Generic ) - User select action: Delete 21:06:01.0757 3936 C:\WINDOWS\system32\Drivers\usbaapl.sys - copied to quarantine 21:06:01.0866 3936 USBAAPL ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0913 3936 C:\Program Files\VMware\VMware Player\vmware-authd.exe - copied to quarantine 21:06:02.0443 3936 VMAuthdService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - User select action: Skip 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - User select action: Skip

  Read the article

• O'Reilly Safari Books Online and Sony Reader

  - by Steve

  I've accumulated a good collection of book snippets in pdf format from Safari Online and I was thinking about getting an ebook reader, specifically the Sony-PRS300, to hold them all for portable reference. If anyone has done this, two questions. Are there any DRM restrictions when the pdfs are put on the reader? I can't see any restrictions flat out in the pdfs on my notebook. There's a watermark that says the pdf is licensed to me. How good is the reader at rendering complex pdfs, with code snippets and illustrations? I read a previous post where it works fine in landscape mode. I can deal with that. Thanks in advance.

  Read the article

• Why is Word 2007 not allowing me to select and edit text?

  - by CT

  I have just installed Office 2007 for a user. Word is acting strangely. If I open a document. The cursor just stays at the top left of the document and I can not place it anywhere else. I cannot select other text. I cannot write additional text. If I simply open up Word and start a new document I am allowed to type like normal. If I were to save and close this document and reopen it. I would not be able to input anything. Seems like I am stuck in some wrong input mode? I have already tried uninstalling and reinstalling. Any ideas?

  Read the article

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• samba shares dissapear everynight

  - by Crash893

  I have ubuntu 8.04lts and recently a weird problem has been cropping up. every night something happens and in the morning my coworkers cant see the shares. If i try to remote into the machine via ssh i don't get a prompt . when i rebooted the machine i would get a "video cannot be displayed in this mode" screen and no other activity on the box. I booted from grub into recovery and tried doing a package repair (keeping my smb.conf) and that didn't seem to do anything after a few other reboots I was able to get it to come up (im not sure what i did) yesterday it did teh same thing i booted to recovery then did a repair xserver and it came right up so i thought that resovled the issue but then today same thing anyone have any idea on what i can look for (im very new to linux in general) worst case sennerio can i just reinstall ubuntu over again with out blowing out the data?

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• zsh completion will not work in emacs shell

  - by benhsu

  I'm learning about the more powerful tab-completion and expansion capabilities of zsh, and they don't seem to work when I run zsh under emacs with M-x shell: cat $PATH<TAB> expands the tab variable in Terminal, but in shell-mode it just beeps. I poked around the emacs environment and here's what I found: TAB (translated from ) runs the command completion-at-point, which is an interactive compiled Lisp function in `minibuffer.el'. It is bound to TAB, . (completion-at-point) Perform completion on the text around point. The completion method is determined by `completion-at-point-functions'. completion-at-point-functions is a variable defined in `minibuffer.el'. Its value is (tags-completion-at-point-function) So I'm surmising I need to add a function to completion-at-point-functions, but which one?

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• How can I fix my WRT54GL's constant crashing?

  - by Aarthi

  I have a Linksys WRT54GL wireless router (the old blue-and-black) whose underside indicates it is Version 2. I've noticed that, on wireless mode, if I am on a Skype call or in a Google Hangout, the wireless aspect will crash completely. In addition, if I am connected via an ethernet cord, my quality (that is, how my voice is received) tanks very quickly. I suspect this is due, in part, to my internet connectivity itself (I'm on Comcast instead of Verizon FiOS, as I'd prefer) but I'd like to stop my wireless router's wireless capability from crashing. I considered a firmware upgrade, but it looks to me as if I am upgraded. Short of manually running ethernet all over my house, I'm not sure what to do. How can I solve my wireless router's issues? If the answer is "buy a new router," then that's valid, as well, in my opinion.

  Read the article

• installing jdk1.7.0 on Ubuntu 11.04 machine

  - by Yogesh

  I am facing a problem while trying to install Java 7 on Ubuntu. The following are the steps that I performed for installing: I installed the setup file from the link given below: wget http://download.oracle.com/otn-pub/java/jdk/7u1-b08/jdk-7u1-linux-x64.tar.gz I have a file: jdk-7u1-linux-x64.tar.gz I Untared it: tar -xvf jdk-7u1-linux-x64.tar.gz sudo mv ./jdk1.7.0_01 /usr/lib/jvm/jdk1.7.0_01 sudo update-alternatives –config java Here it gave me the following output: There is only one alternative in link group java: /usr/lib/jvm/java-6-sun/jre/bin/java Nothing to configure. sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_01/jre/bin/java 1(I entered 1 here.) sudo update-alternatives --config java java -version. It showed the following output java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) I am not sure if jdk1.7.0 is installed as its showing the version as 1.6.0_26.

  Read the article

• The mouse pointer in my Ubuntu VM has turned into a little hand with a document, and clicks are igno

  - by Daryl Spitzer

  The mouse pointer in my Ubuntu 8.04.3 LTS VM (running in VMware Fusion) has changed into a little hand holding a document. It doesn't show up in screen-shots. All mouse clicks (left or right) are ignored. But I can still type in the one Terminal window I have open. (And commands work fine.) I wonder if I'm in some kind of drag-and-drop mode. How do I get out of this? Update: Rebooting (from the command-line) worked. Ubuntu came up with the regular mouse-pointer.

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• ScreenShare: command line and observe only.

  - by Shyam

  Hi, I have a wide TV screen that is attached to a Mac Mini. I am able to use this screen as a second screen using an application like ScreenRecycler. However, Sometimes I want to demonstrate what I am doing on my box on this TV screen. As this TV is attached to a Mac Mini, I want to have a screen sharing done reversed. As I know screen share can be done in observe mode and full screen, this would be more than sufficient. Because it would be pretty useless to run it continuously, I want it on demand. For this, I want to use SSH. So the only thing I would like to know is, how do I start screen sharing in from a Terminal Session. On Windows, I could start an application by using "start notepad.exe", I am looking for something similar. Eventually, I want to make this work on other boxes too. Thanks for your help!

  Read the article

• Input not supported message when monitor is powered off then back on

  - by Jason Down

  I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

  Read the article

• IE8 complains about SSL name mistmatch

  - by Cerin

  When visiting an SSL protected website, IE8 complains about the certificate name not matching the website address, but gives no information about the certificate or what name it's looking for. Visiting the same site in IE9 (or IE9 in "IE8 mode"), Firefox, Chrome, and Safari shows no problems, and that the certificate matches the address. Certificate checkers indicate everything is installed and configured correctly. Does anyone know what might be causing this? Is this a known issue or bug in IE8? I've been Googling for similar issues, but due to the uncertainty as to what's actually going on, I'm not sure what to search for. My problem reads similar to this question. However, my server is running Apache2.

  Read the article

• Prevent registry changes by users

  - by graf_ignotiev

  Background: I run a small computer lab of 10 computers using Windows 7 x64 Enterprise. Our users are set up as limited users. For additional restrictions, I set up local group policy for non-administrators using the microsoft management console. Problem: Recently, I found out that some of these restrictions had been removed. Reviewing the settings MMC and in ntuser.pol showed that the settings should still be in place. However, the related registry settings were missing in ntuser.dat. I already have registry editing disabled in the GPO (though not in silent mode). Question: What is the best way to deal with this situation? Should I look into preventing registry setting changes? Should I set up registry auditing to found out how these keys are getting changed in the first place? Or should I give up the ghost and write some kind of logon script that enforces registry values if they've been change? Any other ideas?

  Read the article

• Opening tabs in Google Chrome crashes my system

  - by David Golding

  When I open tabs to sites such as BBC iPlayer I have about a 4/5 chance that it will crash my entire system. The system can remain unresponsive for up to 30 mins or as little as 2. This has only happened recently and is becoming very annoying as the rest of my system can be running perfectly fine then I open a tab and it hangs. It isn't always flash media webpages so I have ruled that out and I have check my addons opened them in incognito mode, done all the usual error checking.

  Read the article

• Can I run AD commands from a standard PowerShell script?

  - by Ben

  I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system?

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >