Search Results

Search found 14610 results on 585 pages for 'william tell'.

Page 260/585 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

• boot up fails. drops to initramfs prompt 12.04

  - by dpm

  I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

  Read the article

• How do you keep cool when production system goes down?

  - by Mag20

  This has happened to most of us... You come to work one day. Everything seems normal: the sun is shining, birds are chirping, but you notice a couple of weird things on your way to work like deja vu with cat in matrix. You get into office, there are a lot of phones ringing, but could be that they are just doing a new sales promotion. You settle in, when you notice a dark cloud hovering over you. It takes you a couple of moments, but you recognize the cloud is your boss. Usually he checks on you every morning with his "Soooo Peeeeter, how about those TCP/IP reports?" routine, but today he forgot everything about common manners and rudely invaded your personal space. No "Good Morning", just some drooling, grunts and curses. He reminds you a bit of neanderthal who is trying to get away from cyber tooth tiger, fear and panic all compressed in a tight ball. You try to decipher the new language that he created since yesterday and you start understanding that something bad happened overnight - production system went down. Now, your system is usually used by clients during regular working hours from 9-5, but for whatever reason you didn't get any alerts on your beeper (for people under 30 - beeper was like a mobile phone that could only ring and tell you who beeped you). Need to remember to charge it next time. So it is 8:45am, the system MUST be up at 9am. Every 10 seconds, your boss lets out yet another curse which communicates to you that another customer is having problems getting into the system. Also several account managers are now hovering over your boss trying to make him understand how clients are REALLY REALLY suffering. Everyone is depending on you to get the system up ASAP and at the same time hinder your progress by constantly distracting you. How do you keep cool in a situation like this?

  Read the article

• Oracle Database 12c By Example – SQL Developer and Multitenant

  - by thatjeffsmith

  As you may have heard, Oracle Database 12c is now available. In addition to the binaries and docs going out, we also published a few new Oracle By Example (OBE) chapters. You can find those links here on our product page. Do you know who found these, practically the minute they were published? An enterprising DBA-extraordinaire who was just happening to be presenting at the ODTUG KScope13 conference in New Orleans. He thought it would be a good idea to download the new software over a hotel WIFI, install and create a new multitenant database, watch a few OBEs, and then demo that live for his ‘SQL Developer for DBAs‘ session. Pretty crazy, right? Well, he did it, and I was there to watch. Way cool. You can listen to @leight0nn tell his story in his own words via this ODTUG interview with @oraclenered. In case you’re too giddy to sit through the video, I’ll give you a preview – he succesfully cloned a pluggable database in about a minute with only a couple of clicks using Oracle SQL Developer 3.2.20.09 while connected to a 12c database.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• cd not doing anything in the Windows Shell [closed]

  - by ACarter

  Possible Duplicate: Using cd Command in Windows Command Line, Can’t Navigate to D:\ Look at the latter lines of the shell, the cd lines. Nothing's happening :( This is the Win8 shell. I used to have Win7 on C:\, and have since installed Win8 on D:. As you can see, the prompt is in C:\, and so I'm trying to move it to D:\ where it should be. And nothing's happening. How can I change the directory? (Bonus points to anyone who can tell be how to change the default shell directory.

  Read the article

• Can't send emails through sendmail, error occured

  - by skomak

  Hi, I have sendmail MTA and i use pear:Mail class to send mails through remote sendmail server. Everything was fine till yesterday. Probably nothing changes was made in configs. At maillog i can see: May 6 12:58:55 xxx sendmail[25903]: STARTTLS=server, relay=hostxxxx.static.xx.xx.pl [85.x.x.x], version=TLSv1/SSLv3, verify=NO, cipher=DHE-RSA-AES256-SHA, bits=256/256 May 6 12:58:56 xxx sendmail[25903]: o46AwtqE025903: hostxxxx.static.xx.xx.pl [85.x.x.x] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA2 and in /var/log/messages: May 6 13:00:17 lilia sendmail[27193]: realm changed: authentication aborted I use ldap to authenticate users but i used the same script to check mailing on another server and it works there good, only this server behave weird. Packets are deliverd to sendmail server i can see it in tcpdump, but there is smaller packets than on other server which sends emails. Could you tell me how can i check what is wrong with that? D.S.

  Read the article

• iDRAC on Dell R710 and R720

  - by BT643

  I've called Dell twice to try and clarify this basic (or so I thought) question, but I've had two different answers so far. We have a Dell R710, and a Dell R720. Does DRAC come installed by default on either? Dell said it comes build into the motherboard on the R720 but the second time I rang, they said we didn't have it. Can anyone tell me if DRAC comes as standard on the R720? I'm aware we'll need a license as well, I'm just interested in the physical capability on the server. I've never used DRAC before and know next to nothing about it, so apologies if this seems blindingly simple. Thanks

  Read the article

• High Availability Configuration using Heartbeat and Pacemaker

  - by pradeepchhetri

  I have the following setup: I have configured high availability between two load balancers (HAProxy) so that if HAProxy1 get down, the floating IP gets transferred to the other load balancer HAProxy2, hence all the clients will get the response from HAProxy2, which at the back-end is doing LB among the sme two webserver. This is for removing the single point of failure in case of only one HAProxy. Whenever I stops the hearbeat in HAProxy1, the floating IP goes to HAProxy2. But I want to configure such that whenever the process haproxy goes down, the floating IP should get assigned to HAProxy2. Can someone tell me how to implement it ?

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• Aperture and networked drive: thinks images are offline

  - by AK

  I keep my photos on a networked drive (wireless), and they are referenced by Aperture. Aperture seems to not try very hard to look for this drive. Usually I have to open the network drive in Finder before opening Aperture -- otherwise it doesn't find the images and considers them offline. To me this seems like Aperture isn't willing to look on the network for the drive, unless it was helped along by pointing it out in Finder. It doesn't work if I start Aperture first and then navigate to the drive in Finder. What are some workarounds to making this functional? Is there a way to tell Aperture to look again without restarting the program?

  Read the article

• Old hard drive file permissions still there

  - by blsub6

  I have a new hard drive, put Windows 7 on it and want to get all the files off of my old hard drive. I put in my old hard drive as a slave drive. I can see the files but when I try to move 'em, it tells me that I'm not the owner of the file. I try to take ownership of the file and it doesn't work (it doesn't tell me that I can't take ownership of it, it goes through, just gives me the same error when I try and open the file again). I've tried modding the permissions, no dice. Anything else I can try?

  Read the article

• How do I get a rt2800usb wireless device working?

  - by Jii

  My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

  Read the article

• How can I make pref changes via defaults command happen immediately?

  - by user329863

  There are many changes to Finder, Dock, etc. preferences that you can do with the defaults command, i.e. defaults write com.apple.finder AppleShowAllFiles -bool yes However, in order to make the changes take effect, you must quit and relaunch the target app: osascript -e 'tell app "Finder" to quit' When the Finder is quit like this (rather than using the killall command, as some published sources advise), it saves and restores its window placements and disk locations (but not the forward-and-back history associated with each window). Is there some way to make such changes take effect immediately, without quitting the target app? After all, when you make changes in the Dock preference panel, they take effect instantly in the Dock application. Is there some Apple Event that I can send to make the change or make the app reread its prefs?

  Read the article

• Number Tabs in Chrome or Firefox

  - by Bruce Connor

  I like to use the Ctrl or Alt + Number shorcut to jump quickly to a specific tab. Problem is: When you have a lot of tabs open it is hard to look at them and quickly know which one is tab number 7. Is there a way (extension possibly) to show a tab's number in its title? This way each tab would have a number added to its title right beside the favicon. This way you could immediately tell which number you need to press to jump to a specific tab. I use both Chromium and Firefox, so I'm accepting answers for either one (though I'd prefer both =) ).

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• Is it possible to use the MMM tool without virtual IP capability?

  - by Artem

  We are on a host (Serverbeach) that does not support Virtual/floating IPs until you reserve at least a half-rack, which is just a little more than we are willing to spend per month right now. We do have 2 machines in one of their datacenters, and I am using these 2 machines right now in the Master-Master in Active-Passive Mode just like done by MMM -- http://mysql-mmm.org/. I have just set them up and I managing them manually, with manual switch on the Web frontend to tell it to connect to the correct (active) master. Is there any way to use MMM without virtual IPs? Any other comments on this setup?

  Read the article

• Recommended Method to Watch Amazon Prime using Ubuntu 14.04 LTS

  - by Kurt Sanger

  I realize that Hal is no longer in the Ubuntu Software Center for Ubuntu 14.04 and it is only available from a third party at this time. But I would like to know what Ubuntu's plans are for integrating DRM into Linux? Especially with Amazon's integration into the search tool, one would hope that they would make it easier for their Amazon Prime customers to watch Instant Videos. Is the repository for getting Hal for 13.10 safe for use? What will that break if I install it onto 14.04? Or do we need to find another OS that has DRM built into it? If Hal is okay to add to the OS using a third party repo, then why doesn't Ubuntu Software Center support it too? I imagine that Amazon's contract with the video copyright holders requires that they have some protection on electronically distributed media. I also imagine that getting Amazon to change is much harder than getting a bunch of software engineers to fix Ubuntu. Unless they don't want too. At which point Ubuntu isn't really a complete OS. Very disappointing. In general the ease of use of Ubuntu, the software center, and the large variety of applications was alluring. But breaking DRM wasn't a great idea. Can't wait to see what fails in our next update. Please tell us that there is a plan that is going to work in our future.

  Read the article

• IIS- defining a website as a dev site

  - by Lock

  I am new to IIS. Is there a way during the setup of IIS to have a variable of some sort set that I can use to tell my site that this is the development copy? I am using PHP via IIS 7.5 and would like to have a file with a few lines that define which databases etc is used by my application. Is this the purpose of web.config? I would love there to be a place in the setup of the website where I can set a few variables that are accessibly by my application. That way, when I migrate files to live, I don't need to worry about access details to databases etc.

  Read the article

• Folder Size Column on Explorer on Windows Vista/Seven

  - by Click Ok

  I'm a big fan of FolderSize, but unfortunately it works only on Windows XP. Even reading this and this, I'm not convinced that I cannot to have a column showing the folder size on Windows Explorer. Even with all "problems" FolderSize worked like a charm in WindowsXP. In a sysadmin life, FolderSize is explendid. Before select a lot of folders to send to backup in DVDs, I can check directly in Windows Explorer the size of the folders and get a set of folders with 4.3Gb to burn in a DVD. In another situation, I can view in the root folder the size of the bigger folders in the hard drive and start a good strategy of backup/partitioning/transfer to another drive/etc. If desired, I can tell a lot of another needs that in my sysadmin life I need a tool like FolderSize... There is someone that is actively developing a solution to show folder size on Windows Explorer in Vista/Seven Windows? What the problems that I can face if I develop myself that "add-in" for Windows Explorer?

  Read the article

• when to use squid on server side?

  - by ajsie

  so i have set up apache serving my php pages. i read about squid but don't understand why/how i should use it to speed up my web server. from what i've learned squid is located in same network (or another) and caches content requested by the web browsers, and then when another web browser wants a same page, squid returns that page cached locally, so it never sends a request to the apache server (faster response time for the client, and reduced load for the server). so it seems that squid is for the client side (web browser), and has nothing to do with the server side (apache). but then some people tell others how they have speeded up apache using squid. so im confused. could squid be used on the server side too? and how will it work?

  Read the article

• Google Blogger Website CName and/or Text File Issues

  - by Francis Gibbons

  I have a blogger Blog website and I would like to have it show up on my company website. I have read a couple articles out there on how to do it. A hand full of them talk about using FTP which is old and no longer available. However, I am trying to following along with this one: http://www.infinite42.com/small-business/integrate-blogger-blog-website Which seems pretty easy but I am having a problem getting Google to Verify the DNS CName or Text Record that I created on my Windows 2007 Server. Do I need to create this record at the registra level. Right now the domain is setup at the registra to point the www record to my server where on my server I tried the Txt Record and the CName Record with no luck in DNS. Here are the Google instructions for creating a CName file record in DNS: Follow the steps below to create a DNS (Domain Name System) record that proves to Google that you own the domain. Add the CNAME record below to the DNS configuration for abc.com. CNAME Label / Host: CNAME Destination / Target: Click Verify below. When Google finds this DNS record, we'll make you a verified owner of the domain. (Note: DNS changes may take some time. If we don't find the record immediately, we'll check for it periodically.) To stay verified, don't remove the DNS record, even after verification succeeds. Here is the link to do it with a CName: http://googlewebmastercentral.blogspot.com/2012/08/domain-verification-using-cname-records.html When I go to add my CName record on my server's DNS the only two fields available are Alias Name and Fully Qualified Domain Name. How am I suppose to create this record can someone please tell me? Thanks, Frank

  Read the article

• Dropbox takes hours? to sync & shows diff. modified times (coincidentially in the future)

  - by user10580

  Dropbox is taking hours to sync, I can't tell exactly how long because the time stamps on the website make no sense - they say the files were modified. . . tomorrow. Actually my netbook (windows xp) says they're last modified tomorrow in windows explorer as well. It's bizarre. The time and date on both computers are correct. The files in question are in a symlinked directory on the laptop (which are synced fine, with the correct timestamps). I have looked for an option to force dropbox to sync, but haven't located one. (There might be a command line method, but I haven't had the time to explore). thanks

  Read the article

• Hardware needs for video conversion server

  - by artaxerxe

  I would need to build a Linux server that will have as its main task to perform the video conversion. For video conversion, the most likely I will use FFMpeg tool. Question: Can anyone tell me if for improving this automated video conversion a video card will improve the process or not? The idea is that I will get movies at a very high quality that I will need to be converted in formats available for different devices (iPhone, iPad, etc.). That conversion will be performed through a CLI (command line interface). I will need that conversion to be done in the least time possible (ok, that's a kind of saying, not an absolutely specified short time).

  Read the article

• ADFS 2.0 and CRM 2011 IFD - Error 403 when being redirected

  - by JohnThePro

  I'm not sure what happened here, but let me give you the rundown. I have a CRM 2011 IFD that by all accounts was functioning. Out of nowhere, I find that when being redirected to ADFS 2.0 login page by CRM, instead of seeing the login page, I get the following error: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I'm not sure what is going on here. The certs are good, as best as I can tell, the logins are good. More specifically, nothing has been modified. This all worked just fine, and now it doesn't. I'm really stumped.

  Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >