Search Results

Search found 21392 results on 856 pages for 'audio output'.

Page 261/856 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Can't connect nonlocally after 12.10 upgrade

  - by user101815

  I've just upgraded one of my systems from 12.04 to 12.10. Now I can't connect on that system beyond my local network. Connections within the local network seem to work fine, and I can make nonlocal connections from other machines (like the one I'm asking this question from). I suspect that some routing information has been messed up, but I don't know where to look for it. It's not a nameserver problem -- pinging outside sites by their IP addresses doesn't work either. I have another laptop next to this one, also running Kubuntu 12.10. On the one that can't connect, arp produces no output. On the other one, it produces 192.168.0.1 ether 00:23:69:fa:ce:ae C wlan0 On the working machine, the output of netstat starts with some tcp entries. On the nonworking one, those entries are absent. I asked this question on the Ubuntu forum but haven't gotten any answers there. One further complication: since the troublesome machine has no outside connection, it's extremely difficult to download anything to it. For what it's worth, "ping 8.8.8.8" produces "connect: Network is unreachable". Update: after a lot of fiddling, I have my external world back. I don't know what the key action was, but the first indication of progress was that "ping 8.8.8.8" worked. At that point I still didn't have a working nameserver, so external URLs didn't work. But I did this (based on an online post, of course): sudo dpkg-reconfigure resolvconf and answered Yes to all prompts. That did the trick!! Apparently my problem was unique, or close to it, since I couldn't find any online references to it: local net working, remote net not working, including explicit IP addresses. So I suppose that if no one else has this problem, no one cares about the solution!!

  Read the article

• ffmpeg error while segmenting

  - by Tommy Ng

  I'm using ffmpeg and segmenter on Ubuntu 10.04 to create the transport stream from flv/h264 video files and then segment the ts segments for ipad streaming. Some ts files show an error with segmenter - Output #0, mpegts, to '29': Stream #0.0: Video: 0x0000, yuv420p, 480x360, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: 0x0000, 0 channels, s16 [mpegts @ 0x11f4ac0]sample rate not set Could not write mpegts header to first output file my ffmpeg command for creating the ts file - ffmpeg -i 1.flv -f mpegts -acodec libfaac -ar 48000 -ab 64k -s 480x360 -vcodec libx264 -b 192k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 200k -maxrate 192k -bufsize 192k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 10 -qmax 51 -qdiff 4 -level 30 -aspect 480:360 -g 30 -async 2 -y 1.ts my segmenter command - segmenter 1.ts 10 1 1.m3u8 path/to/streams/

  Read the article

• What's the best way to handle numerous recurring log entries in game loop?

  - by Kaa

  I have a custom logging system, use of which is scattered all over the engine and game. The system is linked to a "LogStore" that has an std::vector<string> logs[NUM_LOG_TYPES] - each vector corresponds with it's log type (info, error, debug, etc.). There's one extra std::vector that has "coordinates" to all log entries in the order they were received. Now, all the logging output is also displayed inside my development console in the game. The game console is handled by HTML-type GUI and therefore requires a new <p> element being added for each log output. My problem is that the log entries that are generated in the main loop each frame freeze the engine, because they continue to add elements to the in-game console, and if the console or guy generates a warning - that creates an infinite logging loop. I want to solve it by handling the recurring log entries in an elegant way that lets you know that something is critically wrong, but won't freeze the engine - like displaying the count of errors in the last 60 frames instead of displaying errors themselves. But how do you guys handle this? Does anyone know any nifty tricks to do this? I understand the question may sound vague, but if someone came across this type of issue I'm sure they would know exactly what's happening. Example problematic log entries: OpenGL warnings (I actually do check for errors every frame in many places) Really any prints anywhere in the main loop (may be debugging, may be warnings)

  Read the article

• Iptables and counters

  - by mehturt

  I'm trying to use iptables counters with munin to monitor traffic of hosts on my local subnet. For each host I set up a rule like this: iptables -I OUTPUT -d $ip This should count the packets going from firewall to $ip, correct? I found out that this does not seem to count all packets. I start tcpdump on my router (Linux) and I see packets to $ip that are not counted. For example I check number of packets for rule to my phone IP. I start tcpdump, refresh Gmail on my phoone, I see packets in tcpdump's output but iptables rule counters are not incremented. Then I open a web page on the same phone and the counters are incremented. What could be the reason?

  Read the article

• how to get a decent emacs setup on linux

  - by Hersheezy

  I am currently interested in switching from vim to emacs. One of the more compelling reasons for this is the smooth integration with a unix environment. The most experienced emacs users I have seen have a bash prompt at the bottom of their window, with stdout going to a buffer right above it. They then interact with the output of programs such as grep in interesting ways. I am on Ubuntu 10.04 and the default emacs environment does not seem to do much for me in the way of integration. For example, in the M-x shell mode, output from basic commands like ls produce lots of strange characters and hitting the up arrow does not go to previous commands. Any recommendations on a good direction to go in?

  Read the article

• Text File Cannot read by Batch File

  - by Typowarrior

  I have the problem where TXT file that batch create can't be read. it turns to ECHO OFF Result. Here is 1st code need to be run. echo. wmic /output:huhu.txt Path CIM_DataFile WHERE Name='C:\\Users\\uJaNbaTus\\Desktop\\HyperTerminal.exe' Get Version echo. Then I create another .bat file with this code and run it. echo. setlocal ENABLEDELAYEDEXPANSION set revision= for /f "delims=" %%a in (huhu.txt) do ( set line=%%a if "x!line:~0,8!"=="xVersion " ( set revision=!line:~8! ) ) echo !revision! echo. endlocal When I run this .bat file the result Showing ECHO off. Btw if I create another file using notepad and replace (huhu.txt) I didn't get any error and the output come from txt file.

  Read the article

• Setting up a transparent proxy with only one box.

  - by Scott Chamberlain

  I am playing around with transparent proxies, unfortunately I do not have two machines to test it out with. The current way I am doing things is the program makes a request to a computer on port 80, I use iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy so I want to do something like iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong, I am learning after all and constructive criticism is definitely appreciated. The machine I am using is pretty low end so I would like not not have to create a VM with a second box unless absolutely necessary.

  Read the article

• Date sorting with ls

  - by nearly_lunchtime

  How can I sort the output of ls by last modified date?

  Read the article

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• SEO Blog Indexing : Dot Wordpress Versus a Registered Domain?

  - by rumspringa00

  I've used Wordpress for a few of my client's sites, mostly small businesses and ecommerce sites. I have found through Google Analytics as well as the All in One Webmaster plugin that when it comes to social media, using Wordpress is a surefire way of getting your site indexed by Google and occasionally Bing and Yahoo. Since I am a heavy WP user, I'd like to contribute by registering a dot Wordpress domain for my portfolio. When using a WP installation concurrently with a WP domain, e.g. myportfolio.wordpress.com, will the site be more or less likely to be indexed rather a generic myportfolio.com domain? I've seen mixed opinions where people seem to favor a WP domain for URL output where others say that it's a moot point, and that Google will not favor a WP domain over a dot com domain as long as your meta tags are updated and content is keyword optimized. I tend to disagree and believe a WP domian would more likely be indexed and output more URLs over an individual, laconic domain like myportfolio.com. Am I wrong? Thanks in advance!

  Read the article

• Cent OS upgrade PHP

  - by greggory.hz

  I'm in the midst of resolving a bunch of security issues on a clients server to get them compliant with credit card laws and such. The first order of business is getting php from 5.2.14 to 5.2.16. When I run yum update php, this is the output I get: Excluding Packages from CentOS-5 - Addons Finished Excluding Packages from CentOS-5 - Base Finished Excluding Packages from CentOS-5 - Extras Finished Excluding Packages from CentOS-5 - Updates Finished Setting up Update Process No Packages marked for Update I'm fairly new to CentOS, but with Debian/Ubuntu, you can add PPAs to allow new software packages. Is there something similar for CentOS? This output makes it look like it's ignoring all the main package repos as well.

  Read the article

• Set generic iptables rules?

  - by tftd

  This may be a really dumb question but how can you open a port on multiple interfaces without defining the interfaces? For example how do I open port 22 on all interfaces? On my machine I have some interfaces that are dynamic and may or may not be available so I have to set "generic" rules. This code is not working for me but I can't figure out why: # My default policy is to drop the input. # The other policies are required like that. $IPTABLES -P INPUT DROP $IPTABLES -P OUTPUT ACCEPT $IPTABLES -P FORWARD ACCEPT $IPTABLES -t nat -P POSTROUTING ACCEPT $IPTABLES -t nat -P PREROUTING ACCEPT $IPTABLES -t mangle -P OUTPUT ACCEPT $IPTABLES -t mangle -P PREROUTING ACCEPT #Open port 22 on all interfaces ? $IPTABLES -A INPUT -p tcp --dport 22 -j ACCEPT So apparently there's something wrong with the last line... but I can't see it?

  Read the article

• How iptables behaves on timezone change?

  - by pradipta

  I have doubt how iptables keep changing the info in iptables when timezone is change. I am using iptables s v 1.4.8 I have blocked one IP with following details # date Thu Jun 6 12:46:42 IST 2013 #iptables -A INPUT -s 10.0.3.128 -m time --datestart 2013-6-6T12:0:00 --datestop 2013-6-6T13:0:00 -j DROP # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 12:00:00 until date 2013-06-06 13:00:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination But after I change the timezone following things happened automatically . AFTER TIME ZONE CHANGE +++++++++++++++++++++++ #date Thu Jun 6 15:17:48 HKT 2013 # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 14:30:00 until date 2013-06-06 15:30:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # The time value is changed in the rule . It is changing with the timezone how. Where iptables keeps track of timezone. Kindly explain me.

  Read the article

• High system cpu load (%sys), system locks

  - by Mark

  For the last two weeks we are having intermittent severe spikes in system cpu usage (shown as %sys), which last for maybe half a minute, locking most processes, including ssh. I've been trying to figure this out, but atop doesn't show anything relevant (system usage for processes it shows is insignificant), spikes are intermittent and I could not reproduce the spike using any workload for the web application this webserver hosts. If you have any ideas on how to debug high %sys and (sometimes) %si CPU usage, please share them. System specs (don't know if any of this is relevant): Dedicated server, CentOS 6, core i7 950, consistent 4 to 8 GB RAM free at any time, hard drives are in RAID-1. Additional info: dmesg output doesn't change between spikes /var/log/messages doesn't change between spikes Here is cat /proc/vmstat Here is output of mpstat 1 during a typical spike Add 07.11.11: looks like simple reboot restored system state, and we might never know what caused the disturbance in first place.

  Read the article

• In Linux, is it possible to get a listing of drives' disk space usage that also shows volume labels?

  - by DavidH

  I know about df, of course, but df does not output volume labels. I have 5 USB hard drives plugged into my NAS box, and would love to know which is which. Current df output: Filesystem Size Used Avail Use% Mounted on /dev/sda1 27G 2.2G 24G 9% / none 56M 476K 55M 1% /dev none 60M 0 60M 0% /dev/shm none 60M 332K 59M 1% /var/run none 60M 0 60M 0% /var/lock none 60M 0 60M 0% /lib/init/rw /dev/sde1 150G 102G 48G 68% /media/usb0 /dev/sdb1 299G 196G 103G 66% /media/usb1 /dev/sdc1 233G 183G 51G 79% /media/usb2 /dev/sdd1 233G 209G 25G 90% /media/usb3 /dev/sdf1 150G 101G 49G 68% /media/usb4

  Read the article

• How do I force the system to look for new sound devices?

  - by John Zeringue

  I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

  Read the article

• ffmpeg - join / merge on top of each other

  - by AisIceEyes

  I'm trying to join together two videos on top of each other. I already did these two ffmpeg commands ffmpeg -i 2_Out_of_Control.VOB -aspect 16:9 \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1280:720,boxblur=lp=13" \ -c:v libx264 -preset medium \ -c:a copy \ '2(blurred)Out_of_Control.mp4' ffmpeg -i 2_Out_of_Control.VOB \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1080:720" \ -c:v libx264 -preset medium \ -c:a copy \ '2(clear)Out_of_Control.mp4' I'm currently stuck on making the "clear" version on top of the "blurred" version. I'm not sure how to do that. Can anybody help please? Been googling for around 2 days already. Only achieved it by using OpenShot but yeah, would prefer if there is an ffmpeg command to merge the two videos on top of each other. Edit: I want the "clear" video to be at the center at the top of the "blurred" video Edit2: console output would be the same as above: ffmpeg -i 2(blurred)Out_of_Control.mp4 \ -i 2(clear)Out_of_Control.mp4 \ -aspect 16:9 \ -vf <just something that will join the two together: the blurred at the bottom, clear at top that is centered> \ -c:v libx264 -preset medium \ -c:a copy \ '2_Out_of_Control_VOB.mp4' Edit3: here is the output when I used ffmpeg -i 2_Out_of_Control.VOB $ ffmpeg -i 2_Out_of_Control.VOB ffmpeg version git-2013-10-03-c7fe2a3 Copyright (c) 2000-2013 the FFmpeg developers built on Oct 4 2013 05:22:06 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --prefix=/home/username/ffmpeg_build --extra-cflags=-I/home/username/ffmpeg_build/include --extra-ldflags=-L/home/username/ffmpeg_build/lib --bindir=/home/username/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab libavutil 52. 46.100 / 52. 46.100 libavcodec 55. 34.100 / 55. 34.100 libavformat 55. 19.100 / 55. 19.100 libavdevice 55. 3.100 / 55. 3.100 libavfilter 3. 88.101 / 3. 88.101 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc 52. 3.100 / 52. 3.100 Input #0, mpeg, from '2_Out_of_Control.VOB': Duration: 00:05:00.01, start: 0.500000, bitrate: 4574 kb/s Stream #0:0[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, smpte170m), 720x480 [SAR 8:9 DAR 4:3], max. 9334 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0:1[0x80]: Audio: ac3, 48000 Hz, stereo, fltp, 384 kb/s At least one output file must be specified $

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• Path is present, Permissions are okay, but still getting error

  - by N e w B e e

  I recently installed pdftk using instruction provided at stack overflow I installed it, and run the commanded whereis pdftk the result was /usr/local/bin/pdftk /usr/bin/pdftk I have the powerpannel access and I saw it through it that pdftk actually exists at the location i run the command pdftk --version, it was okay but when in php i use <?php $command = "pdftk --help"; system("PATH=/usr/local/bin/ && $command",$response); if ($response===FALSE){ echo 'sorry error occured'; } else{ echo $response; } ?> the output is 127 the version i am using is 1.41 and the output '127' is something that i cant understand can somebody guide me?

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• LINQ – Skip() and Take() methods

  - by nmarun

  I had this issue recently where I have an array of integers and I’m doing some Skip(n) and then a Take(m) on the collection. Here’s an abstraction of the code: 1: int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 2: var taken = numbers.Skip(3).Take(3); 3: foreach (var i in taken) 4: { 5: Console.WriteLine(i); 6: } The output is as expected: 3, 9, 8 – skip the first three and then take the next three items. But, what happens if I do something like: 1: var taken = numbers.Skip(7).Take(5); In English – skip the first seven and the take the next 5 items from an array that contains only 10 elements. Think it’ll throw the IndexOutOfRangeException exception? Nope. These extension methods are a little smarter than that. Even though the user has requested more elements than what exists in the collection, the Take method only returns the first three thereby making the output of the program as: 7, 2, 0. The scenario is handled similarly when you do: 1: var taken = numbers.Take(5).Skip(7); This one takes the first 5 elements from the numbers array and then skips 7 of them. This is what is looks like in the debug mode: Just wanted to share this behavior.

  Read the article

• Mysql loses its root password

  - by RubyDev

  I am having a strange problem, my mysql loses/resets the root password automatically. By which I mean that it resets it to none. It has happened twice this month. I am worried that it can be a security issue as data is open waiting only for someone trying no password! Here is the version: mysql --version mysql Ver 14.14 Distrib 5.1.56, for redhat-linux-gnu (i386) using readline 5.1 Any help would be appreciated. Update: Output of select user, host, password from mysql.user; how it looks after the password got reset | root | localhost | | root | 127.0.0.1 | | | localhost | | | admin | localhost | ################################# | (I have removed the actual output with #) So all the passwords are blank, except for for another user named 'admin'

  Read the article

• Allowing ssh in iptables

  - by sat

  I am doing iptables firewall configuration. Actually, I need to allow ssh connection only from particular IP. But, It is blocking the ssh connection. I used the below commands. sat:~# iptables -F sat:~# iptables -A INPUT -p tcp -s src_ip_address -d my_ip_address --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT sat:~# iptables -A INPUT -j DROP sat:~# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- src_ip_address my_ip_address tcp dpt:22 state NEW,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination If I try to connect from src_ip_address to my_ip_address, it is blocking the connection. Even, It is blocking from my_ip_address to src_ip_address . I haven't put any rules for OUTPUT chain. What is wrong with my commands? How to allow ssh in iptables?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >