Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 261/567 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• How to back up a network volume to my Time Capsule?

  - by Mike

  I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

  Read the article

• Connect a ssd externally such that hdparm is fully supported

  - by student

  I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

  Read the article

• Best motherboard power supply combo for backblaze server

  - by jin14

  Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

  Read the article

• Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

  - by JJGroover

  Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

  Read the article

• Automating Disk Cleanup on Windows using commandline

  - by Ram

  I asked this question on the MSDN forums but there was no response. Maybe someone might be able to help me out here. I am trying to run Disk Cleanup in the command prompt (and through a C# program) and so I went through all the available options from this link: http://support.microsoft.com/kb/315246 While I am just trying to understand what I can do, it would be good if someone could explain why the drive option /d cannot be set while specifying /sagerun:n Or is it possible, by some way, to run /sagerun for a specific drive? Thanks.

  Read the article

• How to view status of software RAID 1 resynching?

  - by tputkonen

  I have two 500 GB disks and yesterday I mirrored first drive to the second one using software RAID 1. PC has now been on for 30 hours. Both disks say "Resynching", but there is no progress indicator. In addition, there is a small yellow exclamation mark on both disks. My questions are: How long could the synch take for 500 GB drive with about 150 GB of data? PC has 4 GBs of RAM and AMD dual core 4000+ Is there a way to monitor status of the synching? How can I check what the exclamation mark means?

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• 284 GiB of data, 217.4 GiB of space

  - by Malfist

  I want to reinstall my OS, but I don't have the hard drive space to backup any more (I have a RAID 1 array, so I haven't done it for a while). In my /home I have 284.8 GiB of data, and I have a spare 250 GB (or 217.4 GiB) hard drive that I've been using for backup. What type of compression algorithm (if any) is capable of this type of compression? I don't care about the time, I have a quad core though, so something that utilizes all 4 cores would be great. I have tried 7zip with no success. Ran on one core for two days and failed because of lack of space. Any ideas?

  Read the article

• How do I back up my Windows partition from an Ubuntu live CD?

  - by lalli

  My Windows partition (C:) is corrupt. I'm booting up from an Ubuntu live CD and trying to copy all the files from C: to my external drive, but the system expands all of the links, producing a projected copy size of 1.8TB (my external drive is just 1TB, and the data in c: is around 700MB). Then I looked at dd and other backup utilities. Anything I looked into, I couldn't figure out whether or not the image would be readable in Windows through any other app. Has anyone else tried to back up data from a corrupted Windows installation using Ubuntu?

  Read the article

• Software that supports ATA Secure Erase Command

  - by vy32

  We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• What Commands Does Windows Startup Repair Run?

  - by user138284

  Background: I created a wim image that we are planning to deploy to some of our computers, but when I image a computer with it from a flash drive it continually reports that the BOOTMGR is missing (and no, it's not booting off the flash drive). I am able to resolve this by running Windows Startup Repair, but I would rather just add whatever command is resolving the issue to a script that runs after the image. I have already tried running fixmbr, fixboot, rebuildbcd, and nt60, but none of those resolve the issue. Basically, I would like to know what exactly is being done when I run Windows Startup Repair.

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• ESXi 4.0u1 - backup/copy options

  - by Hanadarko

  I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

  Read the article

• vmware problems

  - by AO

  I renamed some of my virtual machine files and never did a backup before doing so. Now I can't get the machine to start again as it asks for the old files. I have updated references to these files in the project setting files which are in plain text. The virtual machine keeps on asking for the files anyway. I never shut off the machine properly before starting to rename the files. How can I save my work done on the virtual machine disk? I have tried to create a new machine and adding the disk from the old virtual machine only but there seems to be dependencies between disk files. The parent drive cannot be found I am told when trying to add the drive of interest. Any suggestion on how to resolve the issue?

  Read the article

• opening Dbf files in oracle 10g

  - by nagaraju

  This nagaraju,from India,Hyderabad. I have installed oracle 10g trail version in my system(E drive),created one database with my name(database:-nagaraju),in that created tables, prodecures ,functions ,sequences etc for my project. Due to some sudden problem,i formatted my machine C drive,now iam not ablle to open my database, i need all procedures ,tables which i created in that. Now I newly installed oracle10g again in another folder,how can i copy my old database into my inew installation database. Or can i copy the script of procedures so that ican run in new database. I have all data in Oradata folder,like DBF files etc. Could you please help me, how to do that?

  Read the article

• Vantec NexStar NAS Encloser - Writing large files

  - by peter

  I have one of these 'Vantec NexStar LX - NST-475LX-BK' drive enclosures. It is a NAS device. When I write a file to the device using eSata, or a SMB share I cannot write files over 4GB. I think this is because the drive is formatted with FAT32. But when I access the device using FTP it doesn't matter. I can write files of any size. E.g. I wrote one on there last night which was 30GB. Does this make any sense? Why? I guess the most important thing for me is data integrity.

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >