Search Results

Search found 13586 results on 544 pages for 'gizmo the great'.

Page 261/544 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Redundant Router and Load Balancing vs. DDoS attack

  - by colgatta

  With a small server farm at a hoster with great support and conditions, I worry about the increasing number of DDoS attacks against this hoster (not my web project, but other clients on the same location). I have booked a redundant router and load balancer as managed service with this hoster to share the load with all the dedicated servers. However, I was lost again today because another one's project was attacked with DDoS for hours :-( Each hour means hundreds of dollars loss whenever my adserver and tracking is not reachable. Even time-out advertising have to be paid by me but can not be resold to my clients without the servers being available. All the time, the servers, the load and traffic is OK and health, but no chance to keep this stable/online if the hoster is vulnerable. Anyone has ideas or suggestions how to protect - even against DDoS?

  Read the article

• Saving Photoshop workspace doesn't remember docked panel state

  - by johnh

  A friend of mine has recently setup his computer with a fresh install of Windows 7 and Photoshop CS5. He's having a strange issue with saved workspaces not remembering the state of docked panels. As an example, he's docked several panels on the right of the screen. The Layers panel is docked but is open, showing all layers in the document. If he saves this as a workspace, closes and reopens Photoshop and loads the workspace, the Layers panel is docked but is closed. It's not the only panel this is happening with. It's not a big problem but he's having to open 4 panels and drag them to the appropriate height each time he starts Photoshop. Does anyone know of a possible fix for this? Any insight would be great.

  Read the article

• More than one way to skin an Audit

  - by BuckWoody

  I get asked quite a bit about auditing in SQL Server. By "audit", people mean everything from tracking logins to finding out exactly who ran a particular SELECT statement. In the really early versions of SQL Server, we didn't have a great story for very granular audits, so lots of workarounds were suggested. As time progressed, more and more audit capabilities were added to the product, and in typical database platform fashion, as we added a feature we didn't often take the others away. So now, instead of not having an option to audit actions by users, you might face the opposite problem - too many ways to audit! You can read more about the options you have for tracking users here: http://msdn.microsoft.com/en-us/library/cc280526(v=SQL.100).aspx  In SQL Server 2008, we introduced SQL Server Audit, which uses Extended Events to really get a simple way to implement high-level or granular auditing. You can read more about that here: http://msdn.microsoft.com/en-us/library/dd392015.aspx  As with any feature, you should understand what your needs are first. Auditing isn't "free" in the performance sense, so you need to make sure you're only auditing what you need to. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Proper method to update and draw from game loop?

  - by Lost_Soul

  Recently I've took up the challenge for myself to create a basic 2d side scrolling monster truck game for my little brother. Which seems easy enough in theory. After working with XNA it seems strange jumping into Java (which is what I plan to program it in). Inside my game class I created a private class called GameLoop that extends from Runnable, then in the overridden run() method I made a while loop that handles time and such and I implemented a targetFPS for drawing as well. The loop looks like this: @Override public void run() { long fpsTime = 0; gameStart = System.currentTimeMillis(); lastTime = System.currentTimeMillis(); while(game.isGameRunning()) { currentTime = System.currentTimeMillis(); long ellapsedTime = currentTime - lastTime; if(mouseState.leftIsDown) { que.add(new Dot(mouseState.getPosition())); } entities.addAll(que); game.updateGame(ellapsedTime); fpsTime += ellapsedTime; if(fpsTime >= (1000 / targetedFPS)) { game.drawGame(ellapsedTime); } lastTime = currentTime; } The problem I've ran into is adding of entities after a click. I made a class that has another private class that extends MouseListener and MouseMotionListener then on changes I have it set a few booleans to tell me if the mouse is pressed or not which seems to work great but when I add the entity it throws a CME (Concurrent Modification Exception) sometimes. I have all the entities stored in a LinkedList so later I tried adding a que linkedlist where I later add the que to the normal list in the update loop. I think this would work fine if it was just the update method in the gameloop but with the repaint() method (called inside game.drawGame() method) it throws the CME. The only other thing is that I'm currently drawing directly from the overridden paintComponent() method in a custom class that extends JPanel. Maybe there is a better way to go about this? As well as fix my CME? Thanks in advance!!!

  Read the article

• I am trying to setup phpMyAdmin to use with a remote MySQL databases on Scientific Linux release 6.2

  - by techsjs2012

  I am trying to setup phpMyAdmin to use with a remote MySQL databases on Scientific Linux release 6.2. If I use the mysql command line to connect to the remote database it works great but if I use mysqladmin I am getting "#2002 Cannot log in to the MySQL server". I have found if I do a: setenforce 0 It will work from myphpadmin to my remote database but once I reboot or set Scientific Linux setenforce back to one it stops working again.. I know setenforce 0 is not the right thing to do but can someone please give me details steps on how to get this working the right way... thanks I am new to Scientific Linux and been having some issues.. thanks

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Blocking IP's Nginx behind proxy

  - by FunkyChicken

  I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

  Read the article

• Finding a job: feedback on my current prodicument and my relentless efforts [closed]

  - by Michael

  I am a very well rounded IT guy, with a passion for programming in particular. I have been through a BS program less the internship as I refuse to go lower than minimum wage (i.e. free) and/or such opportunities find the institution lacking. Since then, the catalog for my degree has changed, so I am making peace without it. I go up for job interviews and get myself no farther than a submitted resume. I have even changed my strategy and made this website: http://goo.gl/qqpN8 to showcase my highlights (but not at all exhaustive) for specific areas in the US and paid for classified ads. The 'internship' is notable as I am just trying to get my foot in the door. Because IT is so vast, with programming and engineering in particular, I spend my time researching the requirements for the job I am applying for. This has made me that well rounded guy I spoke of earlier, but has made me a victim of being a jack-of-all-trades; unfortunately being a master of none. I embrace my gung-ho attitude and find it to be a trait that has powered my career before. But I am starting to lose steam. I want it straight. What is not appealing about everything I am doing? What are the technologies that I need to focus on that are in great demand at the moment?

  Read the article

• What is a good program, with PostScript output (for LaTeX), to make circuit diagrams?

  - by Breakthrough

  Hello; I just found out to my dismay that Visio 2007 does not include the ability to output drawings in EPS/PS formats, which makes it unsuitable for my uses. I wish to create various circuit digrams (including some texts for resistor values, voltage sources, etc...) with most electronic components (resistors, logic gates). Visio was a great tool for this, but I need to include these in lab reports which I am typesetting with LaTeX. The recommended format to include images in LaTeX is PostScript, so the fonts can be properly substituted, and the drawings scale properly. So my question: Is there a Windows program which will allow me to create circuit diagrams, add various labels, and export it to PostScript format?

  Read the article

• Partition Alignment Confusion

  - by user170757

  I have a new Samsung 840 250GB SSD on the way, and I want to make sure that everything is running optimally after install. I've spent many frustrating hours on the internet trying to understand how I should align the partitions of the SSD when it arrives (and even how to partition everything; my other drive is a 1TB HDD with files already on it). I'd like to know a foolproof way of setting everything up. Now, the only place I could find the erase block size of the 840 is here: http://thessdreview.com/Forums/ssd-beginners-guide-discussion/3630.htm I simply can't understand why such information isn't made freely accessible by manufacturers! But, anyway, this would suggest the EBS is 1536kb, which seems odd to me. It is to my understanding that you should now align by MiB (usually set at 1MiB). I assume that the figure above should actually be 1536k B=1.5MiB? This seems to suggest the partition alignment will be somewhat non-standard. So my question is: How do I align my partitions given this information? Please bear in mind that I have never used linux before; I'm doing my best to get everything set up so that I can begin to learn but am finding this process incredibly opaque and time consuming. If possible, a step by step guide through GParted would be great; at the moment I'm considering an NTFS partition ~20GB for Windows (playing games), an EXT4 ~20GB for ubuntu (for doing everything else) and a shared documents+games partition for everything else in NTFS file format. I'm not going to have any swap partition and use swap files instead.

  Read the article

• How To Export/Import a Website in IIS 7.x

  - by Tray Harrison

  IIS 6 had a great feature called ‘Save Configuration to a File’ which would allow you to easily export a website’s configuration, to be later used to import either on the same server or another box.  This came in handy anytime you wanted to duplicate a site in order to do some testing without impacting the existing application.  So naturally, Microsoft decided to do away with this feature in IIS 7. The process to export/import a site is still fairly simple, though not as obvious as it was in previous versions.  Here are the steps: 1. Open a command prompt and navigate to C:\Windows\System32\inetsrv and run the following command: appcmd list site /name:<sitename> /config /xml > C:\output.xml So if you were wanting to export a website named EAC, you would run the following: If you’ll be setting up another copy of the site on the same server, you’ll now need to edit the output.xml file before importing it.  This is necessary in order to avoid conflicts such as bindings, Site ID, etc.  To do this, edit the XML and change the values.  Go ahead and make a copy of the home directory, and rename it to whatever folder name you specified in the output – /EAC2 in this example.  If you decide to change the app pool, make sure you go ahead and create the new app pool as well. Once these edits have been made, we are now ready to import the site.  To do that run: appcmd add sites /in < c:\output.xml So for our example it would look like this: That’s it.  You should now see your site listed when opening up Inet Manager.  If for some reason the site fails to start, that’s probably because you forgot to create the new app pool or there is a problem with one of the other parameters you changed.  Look at the System log to identify any issues like this.

  Read the article

• Lync Server 2010 with Hosted VoIP PBX

  - by kmehta

  We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• DNS Zone file and virtual host question

  - by Jake

  Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. Any advice would be great and if you need more info to answer the question, don't hesitate to ask.

  Read the article

• Java Magazine: Developer Tools and More

  - by Tori Wieldt

  The May/June issue of Java Magazine explores the tools and techniques that can help you bring your ideas to fruition and make you more productive. In “Seven Open Source Tools for Java Deployment,” Bruno Souza and Edson Yanaga present a set of tools that you can use now to drastically improve the deployment process on projects big or small—enabling you and your team to focus on building better and more-innovative software in a less stressful environment. We explore the future of application development tools at Oracle in our interview with Oracle’s Chris Tonas, who discusses plans for NetBeans IDE 9, Oracle’s support for Eclipse, and key trends in the software development space. For more on NetBeans IDE, don’t miss “Quick and Easy Conversion to Java SE 8 with NetBeans IDE 8” and “Build with NetBeans IDE, Deploy to Oracle Java Cloud Service.” We also give you insight into Scrum, an iterative and incremental agile process, with a tour of a development team’s Scrum sprint. Find out if Scrum will work for your team. Other article topics include mastering binaries in Maven-based projects, creating sophisticated applications with HTML5 and JSF, and learning to program with BlueJ. At the end of the day, tools don’t make great code—you do. What tools are vital to your development process? How are you innovating today? Let us know. Send a tweet to @oraclejavamag. The next big thing is always just around the corner—maybe it’s even an idea that’s percolating in *your* brain. Get started today with this issue of Java Magazine. Java Magazine is a FREE, bi-monthly, online publication. It includes technical articles on the Java language and platform; Java innovations and innovators; JUG and JCP news; Java events; links to online Java communities; and videos and multimedia demos. Subscriptions are free, registration required.

  Read the article

• What language and topics should be covered when teaching non-CS college students how to program?

  - by michaelcarrano

  I have been asked by many of my non-computer science friends to teach them how to program. I have agreed to hold a seminar for them that will last for approximately 1 to 2 hours. My thoughts are to use Python as the language to teach them basic programming skills. I figured Python is relatively easier to learn from what I have researched. It is also a language I want to learn which will make holding this seminar all the more enjoyable. The topics I plan to cover are as followed: Variables / Arrays Logic - If else statements, switch case, nested statements Loops - for, while, do-while and nested loops Functions - pass by value, pass by reference (is this the correct terms for Python? I am mostly a C/C++ person) Object Oriented Programming Of course, I plan to have code examples for all topics and I will try to have each example flow into each other so that at the end of the seminar everyone will have a complete working program. I suppose my question is, if you were given 1 to 2 hours to teach a group of college students how to program, what language would you choose and what topics would you cover? Update: Thank you for the great feedback. I should have mentioned in my earlier post above that a majority of the students attending the seminar have some form of programming experience whether it was with Java or using Matlab. Most of these students are 3rd/4th year Engineering students who want to get a refresher on programming before they graduate.

  Read the article

• Physics-perfect (or somewhere near) 3d sound engine

  - by passcod

  I'm new to game programming, although I have some years of experience in console/web development. My problem is not so much that I can't find what I'm looking for, it's just that I don't have the terminology to actually perform a successful search. I am looking for a physics engine which has great focus on sounds. In fact, I do not care at all for anything else. What I mean is better explained by an example: Suppose a 1st person type game. You are facing North, and someone somewhere around you throws a flute at you (nevermind the absurdity of the situation). The flute spins while it is on its way, making sounds through its holes. There is a wind of say, 5 knots South. I imagine a physics engine will be capable of calculating the trajectory of the flute, as well as the direction it takes after it hits. What I want is for the physics engine to calculate the precise sounds it will make, from any listener's perspective. Does any such engine exists? If there are several, which one would be best for the example above?

  Read the article

• LAN connection suddenly domain_not_set.invalid

  - by Liam Coates

  I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

  Read the article

• How do I fix the display of Windows 7's Control Panel?

  - by kez

  This has really bugged me since I took the plunge and upgraded to Windows 7. I think everything is great on the whole apart from the Control Panel. Instead of ordering from top to bottom like in normal folders, it is ordered from left to right. Whenever I go to find something in Control Panel it takes 3 times as long because I expect to find Programs and Features below Power Options yet it is to the right. This is a screenshot to demonstrate - note the ordering goes across instead of down. My question - does anyone have a cunning fix to display the Control Panel ordered in the same way that normal folders are displayed?

  Read the article

• Bash: Quotes getting stripped when a command is passed as argument to a function

  - by Shoaibi

  I am trying to implement a dry run kind of mechanism for my script and facing the issue of quotes getting stripped off when a command is passed as an argument to a function and resulting in unexpected behavior. dry_run () { echo "$@" #printf '%q ' "$@" if [ "$DRY_RUN" ]; then return 0 fi "$@" } email_admin() { echo " Emailing admin" dry_run su - $target_username -c "cd $GIT_WORK_TREE && git log -1 -p|mail -s '$mail_subject' $admin_email" echo " Emailed" } Output is: su - webuser1 -c cd /home/webuser1/public_html && git log -1 -p|mail -s 'Git deployment on webuser1' [email protected] Expected: su - webuser1 -c "cd /home/webuser1/public_html && git log -1 -p|mail -s 'Git deployment on webuser1' [email protected]" With printf enabled instead of echo: su - webuser1 -c cd\ /home/webuser1/public_html\ \&\&\ git\ log\ -1\ -p\|mail\ -s\ \'Git\ deployment\ on\ webuser1\'\ [email protected] Result: su: invalid option -- 1 That shouldn't be the case if quotes remained where they were inserted. I have also tried using "eval", not much difference. If i remove the dry_run call in email_admin and then run script, it work great.

  Read the article

• Desktop Fun: Mountains Theme Wallpapers

  - by Asian Angel

  Do you love to go on hikes in the mountains and enjoy the scenery? Bring those sweeping views and a touch of the great outdoors to your desktop with our Mountains Theme Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution.         For more fun wallpapers be certain to visit our new Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

  Read the article

• How to connect ethernet on ubuntu (with auto-detection by Ubuntu)

  - by user12285

  Do I need to post another thread for the same? If so, sorry. Yes, I saw that it's been well over six months but I have the same router SmartAX MT880d with ethernet, and the exact same problem, that is no internet even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. Sorry if I don't use the right (technical) terminology to express my issue. English is not my mother tongue. I'm a total beginner with ubuntu. My internet works great in Windows but does not work in Ubuntu. For 2 weeks, I've kept reading on the web and forums and the ubuntuguide.org to name a few but to no avail. Now I see no other solution but to ask for help. My problem is that as a beginner, I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files (eg: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm confused between putting figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem?? Is the subnet 255.255.255.0? Gateway 192.168.1.1. I'm confused as I can also see a different IP starting with 155131*** (is it an account number? no clue again) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• How to create a hotkey to open diigo in Chrome browser?

  - by Nam Gi VU

  I'm using diigo extension in Chrome browser and feel quite tired of clicking the diigo icon every time I want to bookmark. I'm looking for a way to have a hotkey for it but can't find it in the option of diigo. I tried solution suggested by makeuseof website but the diigo booklet doesn't work as great as the extension - it requires to sign in again and again... !? If you have any work-around to get the hotkey for diigo, please share! Thank you!

  Read the article

• Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

  - by retailevolved

  I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

  Read the article

• Show Slave Status not working from console, nor client.

  - by Mr. Leinad

  Hello, I have a somewhat strange case. Whenever one of my coworkers executes this line: show slave status; from their MySQL clients, it works smoothly. But if I do that, it says: ERROR 1227 (42000): Access denied; you need the SUPER,REPLICATION CLIENT privilege for this operation We are all going against the same database, and if I check privileges I can see: GRANT ALL PRIVILEGES ON . TO 'usermysql'@'%' IDENTIFIED BY PASSWORD 'password' There's something wrong with my computer.. but I can't pinpoint where it is.. Thanks EDIT: It's kinda bizarre.. it goes through a VPN remotely. But if I change the internet connection, then it works.. If the previous internet connection is restored, it doesn't.. Could we classify this among the great mysteries of the world? Or someone has an idea?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >