Search Results

Search found 46283 results on 1852 pages for 'metric system'.

Page 261/1852 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Configuring default gateway returned by dhcp server

  - by comp1mp

  Hello, I have a machine which connects via ethernet to a private LAN, and wireless to a network which provides internet connectivity. The private LAN uses a wireless router to perform DHCP. The problem is that the wireless and NIC adapters have different default gateways. The default gateway for the private LAN has a lower adapter metric, and is thus chosen by the routing algorithm. I am thus unable to browse the internet when connected to both adapters. The following link has a solution for manually setting the adapter metric to a high number. http://superuser.com/questions/77822/how-to-tell-windows-7-to-ignore-a-default-gateway I was hoping to find a different solution. Does any one know of a router that allows you to configure its DHCP server to return an empty default gateway? I cannot find such an option for my linksys wrt300n. Configuring a static ip address with no default gateway does work, however I would like to use DHCP if possible. Does anyone know of a different way to specify a default gateway for a windows 7 machine with multiple network adapters without mucking with the adapter metric? Thanks, Matthew

  Read the article

• how to install newer GCC version in CentOS 5.7?

  - by gkdsp

  Using CentOS 5.7, how do I install GCC version 4.6? I just installed version 4.4 using # yum install gcc44 but that version still doesn't support variable length arrays from C99 standard. I don't see a newer version than 4.4 when I type: [root@host2 /etc]# yum list gcc\* Excluding Packages in global exclude list Finished Installed Packages gcc.x86_64 4.1.2-51.el5 installed gcc-c++.x86_64 4.1.2-51.el5 installed gcc-gfortran.x86_64 4.1.2-51.el5 installed gcc44.x86_64 4.4.4-13.el5 installed Available Packages gcc-gnat.x86_64 4.1.2-51.el5 system-base gcc-java.x86_64 4.1.2-51.el5 system-base gcc-objc.x86_64 4.1.2-51.el5 system-base gcc-objc++.x86_64 4.1.2-51.el5 system-base gcc44-c++.x86_64 4.4.4-13.el5 system-base gcc44-gfortran.x86_64 4.4.4-13.el5 system-base I wonder if the newer versions of GCC are not available to CentOS because they're deemed not yet reliable/stable enough (?) Can I download gcc-4.5.3.tar.gz from here: http://fileboar.com/gcc/releases/gcc-4.5.3/ but then how to install?

  Read the article

• Ubuntu 12.04 Server - eth0 1Gbps NIC eth1 10Gbps NIC - all traffic using eth0?

  - by James

  Ubuntu Server 12.04.1 x64 Primary role is an NFS fileserver, for Mac OSX Clients. Hardware: Eth0: 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) Eth1: 07:00.0 Ethernet controller: MYRICOM Inc. Myri-10G Dual-Protocol NIC Config: ifconfig eth0 Link encap:Ethernet HWaddr <MACADDRESS> inet addr:192.168.0.150 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:460042020 errors:0 dropped:148 overruns:0 frame:0 TX packets:231906707 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:581431978417 (581.4 GB) TX bytes:259057368617 (259.0 GB) Interrupt:20 Memory:f7d00000-f7d20000 eth1 Link encap:Ethernet HWaddr <MACADDRESS> inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6832208 errors:0 dropped:2 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:513826442 (513.8 MB) TX bytes:33688 (33.6 KB) Interrupt:59 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:507 errors:0 dropped:0 overruns:0 frame:0 TX packets:507 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:45057 (45.0 KB) TX bytes:45057 (45.0 KB) nano /etc/network/interfaces #The loopback network interface auto lo iface lo inet loopback #The primary network interface auto eth0 iface eth0 inet static address 192.168.0.150 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 #second network interface auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 Currently I am using on the OSX clients: nfs://192.168.0.100/Volumes/Storage to mount the NFS share. My problem is why would all the data (and I have checked using various monitoring tools bmon, iftop, glances, etc) be going over the slower connection?? Also, after configuring /etc/network/interfaces with the above setup I always get an error message at bootup something about waiting for network configuration. Are these connected?

  Read the article

• httpd not starting with systemd on F17

  - by malfy

  Title says it all. This is a fresh Fedora 17 system running on a Xen hypervisor. No idea why it won't start [root@box~]  uname -a Linux box.localhost 3.5.4-2.fc17.i686.PAE #1 SMP Wed Sep 26 22:10:23 UTC 2012 i686 i686 i386 GNU/Linux [root@box~]  cat /etc/redhat-release Fedora release 17 (Beefy Miracle) [root@box~]  systemctl enable httpd.service ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service' [root@box~]  systemctl start httpd.service Job failed. See system journal and 'systemctl status' for details. [root@box~]  systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: failed (Result: exit-code) since Fri, 19 Oct 2012 22:43:37 -0500; 3s ago Process: 18225 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=226/NAMESPACE) CGroup: name=systemd:/system/httpd.service Oct 19 22:43:37 box.localhost systemd[18225]: Failed at step NAMESPACE spawning /usr/sbin/httpd: No such file or directory [root@box~]  ls -al /usr/sbin/httpd -rwxr-xr-x 1 root root 343496 Apr 30 04:56 /usr/sbin/httpd

  Read the article

• How do I tell ubuntu to send traffic to a single IP through eth6?

  - by flashnode

  I want to ensure that all IP traffic going to 172.16.60.62 uses eth6. Please provide complete commands because my linux-fu is rusty. The host is running Ubuntu Precise 12.04 user@host:~$ ifconfig eth3 eth3 Link encap:Ethernet HWaddr 00:e0:81:72:fe:c9 inet addr:172.16.60.122 Bcast:172.16.60.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe72:fec9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:128500 errors:0 dropped:0 overruns:0 frame:0 TX packets:29082 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67524823 (67.5 MB) TX bytes:2217634 (2.2 MB) Interrupt:71 Base address:0x6000 user@host:~$ ifconfig eth6 eth6 Link encap:Ethernet HWaddr 00:60:dd:47:81:35 inet addr:172.16.60.61 Bcast:172.16.60.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:8135/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:109610 errors:0 dropped:0 overruns:0 frame:0 TX packets:109388 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10785630 (10.7 MB) TX bytes:10754350 (10.7 MB) Interrupt:70 user@host:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.60.1 0.0.0.0 UG 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth6 172.16.60.0 0.0.0.0 255.255.255.0 U 1 0 0 eth6 172.16.60.0 0.0.0.0 255.255.255.0 U 1 0 0 eth3

  Read the article

• should the same machine key be used in development and production environments?

  - by Henry Troup

  Our production servers all have the same machine key. However, our production and development systems do not have identical machine keys. We get heaps (about one per second) of exceptions of the form System.Security.Cryptography.CryptographicException: Padding is invalid and cannot be removed. at System.Security.Cryptography.RijndaelManagedTransform.DecryptData() at System.Security.Cryptography.RijndaelManagedTransform.TransformFinalBlock() at System.Security.Cryptography.CryptoStream.FlushFinalBlock() at System.Web.Configuration.MachineKeySection.EncryptOrDecryptData() at System.Web.UI.Page.DecryptStringWithIV()... We deploy the code after a build, .cs source is not present on production. aspx files are present on production. (Should I have posted in Stack Overflow? It's not a coding question.) From experimentation, we've found using the dev machine key value causes the exceptions to go away. Does anyone have documentation that I can use with the security team on the need for identical keys at compile and deployment time?

  Read the article

• Add Route for machine in same DC

  - by gary

  My routing table on my machine with IP of 46.84.121.243 currently looks like this - Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 46.84.121.225 46.84.121.243 21 46.84.121.224 255.255.255.224 On-link 46.84.121.243 276 46.84.121.239 255.255.255.255 On-link 46.84.121.243 21 46.84.121.243 255.255.255.255 On-link 46.84.121.243 276 46.84.121.255 255.255.255.255 On-link 46.84.121.243 276 I'm trying to access 46.84.121.239, which is my other machine in the same DC but my guess is the first rule is blocking it as it is trying to go via the gateway and failing - Tracing route to [46.84.121.239] over a maximum of 30 hops: 1 OWNEROR-9O83HBL [46.84.121.243] reports: Destination host unreachable. Trace complete. I'm doing all this via RDP and already tried changing the metric on the persistent rule with devastating consequences! Here's the persistent rule (working) - Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 46.84.121.225 1 Any help to be able to access the 46.84.121.243 would be very helpful thanks very much.

  Read the article

• Route forwarded traffic through eth0 but local traffic through tun0

  - by Ross Patterson

  I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

  Read the article

• Windows 7 PC crashes after being locked a few minutes

  - by White Island

  I have a problem with an Optiplex 755 PC running (32-bit) Windows 7 Professional. I just installed the operating system last week, and ever since, it seems to crash when I lock the screen. It doesn't happen immediately; it's usually after I walk away, so a few minutes (but I'm not sure exactly how many). I have this non-specific error in the Event log. I've run a chkdsk, thinking it might be hard drive-related, but that didn't help. Any ideas on what to check and how are appreciated. :) Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/17/2010 3:09:28 PM Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: WORKSTATION.domain.local Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event Xml: 41 2 1 63 0 0x8000000000000002 6250 System WORKSTATION.domain.local 0 0x0 0x0 0x0 0x0 false 0

  Read the article

• Reinstall after a Root Compromise?

  - by Zoredache

  After reading this question on a server compromise, I started to wonder why people continue to seem to believe that they can recover a compromised system using detection/cleanup tools, or by just fixing the hole that was used to compromise the system. Given all the various root kit technologies and other things a hacker can do most experts suggest you should reinstall the operating system. I am hoping to get a better idea why more people don't just take off and nuke the system from orbit. Here are a couple points, that I would like to see addressed. Are there conditions where a format/reinstall would not clean the system? Under what types conditions do you think a system can be cleaned, and when must you do a full reinstall? What reasoning do you have against doing a full reinstall? If you choose not to reinstall, then what method do you use to be reasonably confident you have cleaned and prevented any further damage from happening again.

  Read the article

• Puppet Directory and File ownership ignored

  - by Phil Sturgeon

  Puppet seems to be lying to me, which is not very nice. I am trying to set some files and directories included in /vagrant/src to be 666 and 777, and set the ownership group to the correct Apache user (using the PuppetLabs Apache module). Output from Puppet says yes. [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with /tmp/vagrant-puppet/manifests/default.pp... stdin: is not a tty No LSB modules are available. warning: require is a metaparam; this value will inherit to all contained resources warning: notify is a metaparam; this value will inherit to all contained resources notice: /Stage[main]//File[/vagrant/src/addons/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//Package[curl]/ensure: ensure changed 'purged' to 'present' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/uploads/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/mode: mode changed '0755' to '0777' notice: /Stage[main]/Apache/Service[httpd]/ensure: ensure changed 'stopped' to 'running' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/mode: mode changed '0755' to '0777' notice: Finished catalog run in 2.29 seconds Output from ls -lah says no: $ ls -lah /vagrant/src/ total 36K drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 00:11 . drwxr-xr-x 1 vagrant vagrant 340 2012-07-03 08:08 .. drwxr-xr-x 1 vagrant vagrant 136 2012-07-03 00:11 addons drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 assets drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 07:45 .git -rw-r--r-- 1 vagrant vagrant 1.3K 2012-07-03 00:11 .gitignore -rwxr-xr-x 1 vagrant vagrant 1.4K 2012-07-03 00:11 .htaccess -rwxr-xr-x 1 vagrant vagrant 8.8K 2012-07-03 00:11 index.php drwxr-xr-x 1 vagrant vagrant 442 2012-07-03 00:11 installer -rwxr-xr-x 1 vagrant vagrant 2.8K 2012-07-03 00:11 LICENSE -rw-r--r-- 1 vagrant vagrant 1.1K 2012-07-03 00:11 phpdoc.dist.xml -rw-r--r-- 1 vagrant vagrant 3.3K 2012-07-03 00:11 README.md drwxr-xr-x 1 vagrant vagrant 204 2012-07-03 00:11 system -rw-r--r-- 1 vagrant vagrant 42 2012-07-03 00:11 .travis.yml drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 uploads Whats up with that? My entire config can be found here.

  Read the article

• 1 TB hdd and no space to create a partition for linux !

  - by rangalo

  I have a brand new Acer aspire 5811 with core i5 processor and all that. There is windows 7 Home Premium pre-installed on it. I want to install arch and setup a dual boot system. The problem is: Windows shows 4 partitions 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB NTFS Data partition for windows 7 But GpartedLive cd and also arch setup show 5 partitions 938Kb UNKOWN system reserved partition 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB unusable space Because of this, I cannot create another primary partition. Can any body guide me about how should I go for creating partition for installing arch ? Note: I need to keep windows 7 working. regards.

  Read the article

• Routing for Two Hosts Behind a IPSec Tunnel

  - by Brent

  Network A 10.110.15.0/24 Firewall is .1 Host A is .2 Network B 10.110.16.0/24 Firewall is .1 Host B is .2 Two Cisco ASA's. IPSec tunnel with a crypo map that secures 10.110.15.0/24 <- 10.110.16.0/24. Let's say two hosts, 10.110.15.2 and 10.110.16.2 need to talk to each other. Normally I have to enter a persistent static route on a each host along the lines of: route add 10.110.16.0 mask 255.255.255.0 10.110.15.1 metric 1 -p (on the "A" box) I also have to enter another persistent static route on the .16 host in order for the traffic to know how to get back to the .15 network. Note that the default for each machine IS the firewall, so .1. I have no problem adding persistent routes on Windows/ESX/*nux machines but what about a smart switch in the .16 network that I want to manage from the .15 network. Do I need to run a routing protocol? Do I need to have Reverse Route Injection enabled on both ends of the IPSec tunnel? Should I add a route on the firewall? If so, how do you formulate it? Does it get a metric of 1 and my default route 0.0.0.0 get a metric of 2?

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• How to choose which network connection provides the default gateway in Windows XP

  - by Cathy

  I have a laptop with an integrated NIC and a WiFi connection. Both the wired and wireless networks I am using can access the Internet. Win XP is routing all traffic through the wireless network. I want to force it to route everything through the wired network when it is available (i.e. when I am sitting at my desk with the laptop docked) and through the wireless when that is the only option (i.e. when I have undocked my laptop and carried it to a conference room, or if I am out of the office working on a different WiFi network). The wireless connection cannot be established until after I am logged into Windows, so it's always the second network to become available to the OS. I have manually overridden the metric values in the TCP/IP configurations so that the NIC has metric 10 and the WiFi has metric 20. However, Windows is still picking the WiFi adapter's address as the Default Gateway, so this isn't helping. If I manually disable and re-enable the WiFi adapter, then it will switch the default gateway to the wired network and stay that way until I shutdown Windows. How can I tell Windows XP not to replace the default gateway when the WiFi connection is first enabled?

  Read the article

• Unable to bring back terminal launcher in fedora

  - by Sandeepan Nath

  Our office housing keeping guy sat on my linux (Fedora 7) system and somehow removed the main panel. By panel I mean where all the menus are there - Applications, Places, System etc. and contains a tab for every running application. I brought back the panel but now I don't see the terminal launcher and I can't find it anywhere. It used to be there in "Applications - System Tools - Terminal" but now the System Tools option itself is not present there. System - Preferences - Look and Feel - Main Menu. There one System option is unchecked but I can't check it and apply. I am logged in as root. How do I bring it back? Please help. This is very irritating and weird. That guy doesn't even know what he has done so no use of asking him. :)

  Read the article

• Debian/Ubuntu - No network connection

  - by leviathanus

  I have a very weird situation on my Ubuntu 12.04 LTS Server. I can not access (ping) my gateway, although I believe my config is ok - I attach the outputs. Any hints where to look? (I changed the beginning of the IP to something different, just obfuscation) ping 5.9.10.129 PING 5.9.10.129 (5.9.10.129) 56(84) bytes of data. From 5.9.10.129 (5.9.10.129) icmp_seq=2 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=3 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=4 Destination Host Unreachable uname -r 3.2.0-29-generic ifconfig eth0 eth0 Link encap:Ethernet HWaddr 3c:97:0e:0e:54:d7 inet addr:5.9.10.142 Bcast:5.9.10.159 Mask:255.255.255.224 inet6 addr: fe80::8e70:5aff:feda:c4ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1216 errors:0 dropped:0 overruns:0 frame:0 TX packets:490 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107470 (107.4 KB) TX bytes:34344 (34.3 KB) Interrupt:17 Memory:d2500000-d2520000 ip route default via 5.9.10.129 dev eth0 metric 100 5.9.10.128/27 via 5.9.10.129 dev eth0 5.9.10.128/27 dev eth0 proto kernel scope link src 5.9.10.142 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 5.9.10.129 0.0.0.0 UG 1000 0 0 eth0 5.9.10.128 5.9.10.129 255.255.255.224 UG 0 0 0 eth0 5.9.10.128 0.0.0.0 255.255.255.224 U 0 0 0 eth0 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination UPD: Eric, this is how routing information looks on a working server: 0.0.0.0 78.47.198.49 0.0.0.0 UG 100 0 0 eth0 78.47.198.48 78.47.198.49 255.255.255.240 UG 0 0 0 eth0 78.47.198.48 0.0.0.0 255.255.255.240 U 0 0 0 eth0 As I understand it, Hetzner tries to ensure security by this, so I can not take over an IP by changing my MAC. But this is another server, which has another netmask (255.255.255.240) UPD2: BatchyX, on the working server: 78.47.198.49 dev eth0 src 78.47.198.60 cache on the broken: 5.9.10.129 dev eth0 src 5.9.10.142 cache

  Read the article

• error while adding web service to server in website panel

  - by sam

  I got following error while creating website for user in website panel.I am not able to create any hosting space in server's hosting plan it is showing 0 mb space. Stack Trace: [SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.UriFormatException: Invalid URI: The Authority/Host could not be parsed. at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind) at System.Uri..ctor(String uriString) at Microsoft.Web.Services3.WebServicesClientProtocol.set_Url(String value) at WebsitePanel.Server.Client.ServerProxyConfigurator.Configure(WebServicesClientProtocol proxy) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, String serverUrl, String serverPassword) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, Int32 serverId) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.Init(WebServicesClientProtocol proxy, Int32 serviceId) at WebsitePanel.EnterpriseServer.WebAppGalleryController.InitFeedsByServiceId(Int32 UserId, Int32 serviceId) at WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) --- End of inner exception stack trace ---] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1485877 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +221 WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) +68 WebsitePanel.Portal.WebAppGalleryHelpers.GetGalleryApplicationsByServiceId(Int32 serviceId) +31 can anybody help me in this.

  Read the article

• Redhat 6 gui installation VS kickstart gives me different packages?

  - by jonaz

  If i do the graphical install and select basic server + aide and screen i get a system with 535 installed packages. If i look at the /root/anaconda-ks.cfg file in that freshly installed system i see: %packages @base @console-internet @core @debugging @directory-client @hardware-monitoring @java-platform @large-systems @network-file-system-client @performance @perl-runtime @security-tools @server-platform @server-policy @system-admin-tools pax python-dmidecode oddjob sgpio certmonger pam_krb5 krb5-workstation nscd pam_ldap nss-pam-ldapd perl-DBD-SQLite aide screen If i then install a NEW system using a kickstart only containing those packages i get 620 installed packages. So basicly my question is why does the system install almost 100 more packages when using kickstart compared to the GUI installation when the exact same packagegroups are selected?

  Read the article

• Wireless does not work on Ubuntu 9.04

  - by Yongwei Xing

  Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

  Read the article

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• Slow tracepath on local LAN

  - by Simone Falcini

  I am on EXSi and I have 2 instances: Ubuntu and CentOS. These are the network configurations Ubuntu eth0 Link encap:Ethernet HWaddr 00:50:56:00:1f:68 inet addr:212.83.153.71 Bcast:212.83.153.71 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76059 errors:0 dropped:26 overruns:0 frame:0 TX packets:7224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6482760 (6.4 MB) TX bytes:2080684 (2.0 MB) eth1 Link encap:Ethernet HWaddr 00:0c:29:46:5a:f2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:252 errors:0 dropped:0 overruns:0 frame:0 TX packets:608 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42460 (42.4 KB) TX bytes:82474 (82.4 KB) /etc/iptables.conf *nat :PREROUTING ACCEPT [142:12571] :INPUT ACCEPT [5:1076] :OUTPUT ACCEPT [8:496] :POSTROUTING ACCEPT [8:496] -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [2:72] :FORWARD ACCEPT [4:336] :OUTPUT ACCEPT [6:328] -A INPUT -i eth1 -p tcp -j ACCEPT -A INPUT -i eth1 -p udp -j ACCEPT -A INPUT -i eth0 -p tcp --dport ssh -j ACCEPT COMMIT CentOS eth0 Link encap:Ethernet HWaddr 00:0C:29:74:1C:55 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe74:1c55/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:499 errors:0 dropped:0 overruns:0 frame:0 TX packets:475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68326 (66.7 KiB) TX bytes:82641 (80.7 KiB) The main problem is that if i execute this command from the CentOS instance ssh 192.168.1.2 it takes more than 20s to connect. It seems like it's routing the connection to the wrong network. What could it be? Thanks!

  Read the article

• ssh from 1 ubuntu box to another ubuntu box

  - by michael

  Hi, I have 2 ubuntu boxes in a WiFi network. Below is the 'ifconfig' of my destination machine. But in my source machine, I tried 'ssh 192.168.1.2' I get connection refused. $ ifconfig eth0 Link encap:Ethernet HWaddr c8:0a:a9:4d:d6:6a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:35 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4508 errors:0 dropped:0 overruns:0 frame:0 TX packets:4508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:330441 (330.4 KB) TX bytes:330441 (330.4 KB) wlan0 Link encap:Ethernet HWaddr 00:23:14:32:e8:dc inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:14ff:fe32:e8dc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:319828 errors:0 dropped:0 overruns:0 frame:0 TX packets:618371 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30642011 (30.6 MB) TX bytes:921522542 (921.5 MB) How to set up so that I can ssh from 1 box to another?

  Read the article

• attach two hdds to a computer having 500W smps

  - by Gaurav Sharma

  I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

  Read the article

• Setting up /etc/network/interface file for KVM ubuntu 10.10

  - by Charles Thornton

  I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >