Search Results

Search found 9217 results on 369 pages for 'cross apply'.

Page 262/369 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Such thing as a free lunch

  - by red@work

  There is a lot of hard work goes on in Red Gate, no doubt. And then there are things we're asked to get involved with, that aren't hard and don't feel much like work. What? Give up our free lunch at Red Gate for. a free lunch in a pub? Within an hour, myself and a colleague are at the Railway Vue pub in nearby Impington. This is all part of Red Gate's aim to hire more Software Engineers and Test Engineers, to help Red Gate grow into one of the greatest software companies in the world (it's already the best small software development company in the UK). Phase one then - buy lunch for Cambridge. Seriously, not just the targeted engineers, but for anyone who could print the voucher and make it to the nearest of the venues, two of which happen to be pubs. We're here to watch people happily eat a free pub lunch at Red Gate's expense. We also get involved and I swear I didn't order a beer with the food but the landlord says I clearly did and I'm not one to argue. Red Gate are offering a free iPad to anyone that comes to interview for a Software Engineer or Test Engineer role. We speak to a few engineers who are genuinely interested. We speak to a couple of DBA's too, and encourage them to make speculative applications - no free iPad on offer for them, but that's not really the point. The point is, everyone should apply to work here! It's that good. We overhear someone ask if 'these vouchers really work?' They do. There's no catch. The free IPad? Again, no catch. If that's what it takes to get talented engineers through our doors for an interview, then that's all good. Once they see where we work and how we work, we think they'll want to come and work with us. The following day, Red Gate decides to repeat the offer, and that means more hard work, this time at The Castle pub. Another landlord that mishears 'mineral water' and serves me a beer. There are many more people clutching the printed vouchers and they all seem very happy to be getting a free lunch from Red Gate. "Come and work for us" we suggest, "lunch is always free!" So if you're a talented engineer, like free lunches and want a free iPad, you know what to do.

  Read the article

• Proxy settings do not promulgate to fat or thin clients

  - by solizin47

  I work in Hertfordshire schools, which use a proxy eg http://wf1.thegrid.org.uk on port 80 to allow graded access by all users, within the schools, to the Internet. I have Ubuntu 10.04LTS successfully running and I want to set up 12.04LTS to replace it. Many other replies to this question have answered questions about stand-alone computers and not addressed the LTSP server and its clients. I have come to a complete stop over the problem of the proxy server settings not promulgating over the local network to Ubuntu 12.04 thin or fat clients. When you input this setting (there are others for HTTPS and FTP) into the System Settings/Network Manager GUI on the server, then when a user logs into the server, both Firefox and Chrome can read the settings and will gain access to the Internet. HOWEVER, these settings are not promulgated to either thin or fat clients on the local network. Their System Settings/Network Manager GUI remains stubbornly blank. I have rebuilt the image after inputting the proxy settings, but it appears they are not part of the image. /etc/environment (on the server) already has: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" http_proxy="http://wf1.thegrid.org.uk:80/" https_proxy="https://wf1.thegrid.org.uk:80/" ftp_proxy="ftp://proxy.intra.thegrid.org.uk:3128/" I have also tried this export http_proxy="http://wf1.thegrid.org.uk:80" export https_proxy="http://wf1.thegrid.org.uk:80" export ftp_proxy="http://proxy.intra.thegrid.org.uk:3128" within /etc/environment, and that had no effect, either. etc/apt/apt.conf also has: Acquire::http::proxy "http://wf1.thegrid.org.uk:80/"; Acquire::https::proxy "https://wf1.thegrid.org.uk:80/"; Acquire::ftp::proxy "ftp://proxy.intra.thegrid.org.uk:3128/"; The clients still have no proxy settings in their Network Manager, and no client user can access the Internet from Firefox or Chrome. Three questions: Why doesn't the “Apply system wide” button work? It does on 10.04, and every new user, and all existing users have access to the internet through the proxy without problem. How can I set up proxy settings that work for all the 12.04 clients? I noticed that if user West input the settings himself, they would follow him around the clients. However, this is not secure, because there are grades of settings which prevent visits to various sites, eg wf3 allows fewer sites than wf2 or wf1, so I can't allow users to input this setting themselves. Since the proxy setting followed the user around the clients, the setting must be somewhere in the user profile, since none of the other users have the proxy settings. Do you know where, and how I could fix the setting for users, or better, groups? The setting must then be unchangeable by the user, with no access to the Network Manager. If either 2. or 3. can't be done, then the Ubuntu 12.04LTS server is simply no use to us...

  Read the article

• Correcting Grammar for Microsoft Products and Technology

  I see book authors, editors, bloggers, press, team members, and occasionally even a VP misspell our products, technologies, and features that I thought I would build and maintain a list of the correct capitalization and spelling of the most commonly misspelled Microsoft products and technologies. Sources: Internal site (brandtools) and the Microsoft Trademarks Web site. Last updated: April 27, 2010   Incorrect Correct .net or .Net .NET .Net framework 4.0, .NET framework 4.0 .NET Framework AdCenter, Ad Center, Adcenter adCenter Ado.net, ADO.Net ADO.NET Asp.net, ASP.Net ASP.NET Asp.Net ajax, Asp.NET Ajax ASP.NET AJAX Asp.Net Mvc ASP.NET MVC Biz Spark, Bizspark BizSpark Clear Type, Clear type, Cleartype ClearType Directaccess, Direct Access DirectAccess Direct Show, Directshow DirectShow Direct X DirectX Dream Spark, Dreamspark DreamSpark Home Group, Home group HomeGroup HotMail, Hot Mail Hotmail Info Path, Infopath InfoPath Intellisense, Intellisense IntelliSense Iron Ruby IronRuby Kin KIN Linq LINQ MSN Messenger Windows Live Messenger One Note, Onenote OneNote Open type, Opentype OpenType PlayTo, Play to Play To Power Point, Powerpoint PowerPoint Powershell, Power Shell PowerShell Sea Dragon, Seadragon SeaDragon Sharepoint, Share Point SharePoint Silver Light, SilverLight Silverlight Skydrive, Sky Drive SkyDrive Sql Server SQL Server Visual Basic .net (the .net was removed in the 2005 version) Visual Basic  Visual C# Express 2010 or Visual Basic Express 2010 or Visual C++ Express 2010 Visual version 2010 Express as in Visual C# 2010 Express, Visual Basic 2010 Express Visual Studio 2010 Team Foundation Server Visual Studio Team Foundation Server 2010 Visual Studio Ultimate 2010 or Visual Studio Professional 2010 Visual Studio 2010 version, as in Visual Studio 2010 Ultimate, Visual Studio 2010 Professional WebSite Spark, Website spark Website Spark Win 32 Win32 Windows Mobile (except when referring to previous versions like 5.0 or 6), Windows phone 7 Series Windows Phone Xaml XAML XBOX, xbox Xbox Xbox Live, XBOX Live Xbox LIVE   Caveats These guidelines dont apply to URLs (ex: www.asp.net) or to code namespaces, variables, and classes should follow the .NET Framework naming guidelines. This list only covers capitalization/spacing rules, it doesnt cover the correct usage of (tm) or symbols or the correct word usage rules. For those, refer to the trademark Web site. Also note that I have no idea why we are so inconsistent say on keeping features/brands two words versus one word or the order of product/version/year.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• add collision detection to sprite?

  - by xBroak

  bassically im trying to add collision detection to the sprite below, using the following: self.rect = bounds_rect collide = pygame.sprite.spritecollide(self, wall_list, False) if collide: # yes print("collide") However it seems that when the collide is triggered it continuously prints 'collide' over and over when instead i want them to simply not be able to walk through the object, any help? def update(self, time_passed): """ Update the creep. time_passed: The time passed (in ms) since the previous update. """ if self.state == Creep.ALIVE: # Maybe it's time to change the direction ? # self._change_direction(time_passed) # Make the creep point in the correct direction. # Since our direction vector is in screen coordinates # (i.e. right bottom is 1, 1), and rotate() rotates # counter-clockwise, the angle must be inverted to # work correctly. # self.image = pygame.transform.rotate( self.base_image, -self.direction.angle) # Compute and apply the displacement to the position # vector. The displacement is a vector, having the angle # of self.direction (which is normalized to not affect # the magnitude of the displacement) # displacement = vec2d( self.direction.x * self.speed * time_passed, self.direction.y * self.speed * time_passed) self.pos += displacement # When the image is rotated, its size is changed. # We must take the size into account for detecting # collisions with the walls. # self.image_w, self.image_h = self.image.get_size() global bounds_rect bounds_rect = self.field.inflate( -self.image_w, -self.image_h) if self.pos.x < bounds_rect.left: self.pos.x = bounds_rect.left self.direction.x *= -1 elif self.pos.x > bounds_rect.right: self.pos.x = bounds_rect.right self.direction.x *= -1 elif self.pos.y < bounds_rect.top: self.pos.y = bounds_rect.top self.direction.y *= -1 elif self.pos.y > bounds_rect.bottom: self.pos.y = bounds_rect.bottom self.direction.y *= -1 self.rect = bounds_rect collide = pygame.sprite.spritecollide(self, wall_list, False) if collide: # yes print("collide") elif self.state == Creep.EXPLODING: if self.explode_animation.active: self.explode_animation.update(time_passed) else: self.state = Creep.DEAD self.kill() elif self.state == Creep.DEAD: pass #------------------ PRIVATE PARTS ------------------# # States the creep can be in. # # ALIVE: The creep is roaming around the screen # EXPLODING: # The creep is now exploding, just a moment before dying. # DEAD: The creep is dead and inactive # (ALIVE, EXPLODING, DEAD) = range(3) _counter = 0 def _change_direction(self, time_passed): """ Turn by 45 degrees in a random direction once per 0.4 to 0.5 seconds. """ self._counter += time_passed if self._counter > randint(400, 500): self.direction.rotate(45 * randint(-1, 1)) self._counter = 0 def _point_is_inside(self, point): """ Is the point (given as a vec2d) inside our creep's body? """ img_point = point - vec2d( int(self.pos.x - self.image_w / 2), int(self.pos.y - self.image_h / 2)) try: pix = self.image.get_at(img_point) return pix[3] > 0 except IndexError: return False def _decrease_health(self, n): """ Decrease my health by n (or to 0, if it's currently less than n) """ self.health = max(0, self.health - n) if self.health == 0: self._explode() def _explode(self): """ Starts the explosion animation that ends the Creep's life. """ self.state = Creep.EXPLODING pos = ( self.pos.x - self.explosion_images[0].get_width() / 2, self.pos.y - self.explosion_images[0].get_height() / 2) self.explode_animation = SimpleAnimation( self.screen, pos, self.explosion_images, 100, 300) global remainingCreeps remainingCreeps-=1 if remainingCreeps == 0: print("all dead")

  Read the article

• Adding complexity to remove duplicate code

  - by Phil

  I have several classes that all inherit from a generic base class. The base class contains a collection of several objects of type T. Each child class needs to be able to calculate interpolated values from the collection of objects, but since the child classes use different types, the calculation varies a tiny bit from class to class. So far I have copy/pasted my code from class to class and made minor modifications to each. But now I am trying to remove the duplicated code and replace it with one generic interpolation method in my base class. However that is proving to be very difficult, and all the solutions I have thought of seem way too complex. I am starting to think the DRY principle does not apply as much in this kind of situation, but that sounds like blasphemy. How much complexity is too much when trying to remove code duplication? EDIT: The best solution I can come up with goes something like this: Base Class: protected T GetInterpolated(int frame) { var index = SortedFrames.BinarySearch(frame); if (index >= 0) return Data[index]; index = ~index; if (index == 0) return Data[index]; if (index >= Data.Count) return Data[Data.Count - 1]; return GetInterpolatedItem(frame, Data[index - 1], Data[index]); } protected abstract T GetInterpolatedItem(int frame, T lower, T upper); Child class A: public IGpsCoordinate GetInterpolatedCoord(int frame) { ReadData(); return GetInterpolated(frame); } protected override IGpsCoordinate GetInterpolatedItem(int frame, IGpsCoordinate lower, IGpsCoordinate upper) { double ratio = GetInterpolationRatio(frame, lower.Frame, upper.Frame); var x = GetInterpolatedValue(lower.X, upper.X, ratio); var y = GetInterpolatedValue(lower.Y, upper.Y, ratio); var z = GetInterpolatedValue(lower.Z, upper.Z, ratio); return new GpsCoordinate(frame, x, y, z); } Child class B: public double GetMph(int frame) { ReadData(); return GetInterpolated(frame).MilesPerHour; } protected override ISpeed GetInterpolatedItem(int frame, ISpeed lower, ISpeed upper) { var ratio = GetInterpolationRatio(frame, lower.Frame, upper.Frame); var mph = GetInterpolatedValue(lower.MilesPerHour, upper.MilesPerHour, ratio); return new Speed(frame, mph); }

  Read the article

• MS Tech Ed 2011 Coming Soon

  - by sonam

  Microsoft Tech ed 2010 was a great success. Infact  Most of such conferences always provide a great place to meet other  technology enthusiasts and ofcourse,whats in the pipeline for future products of a company or field.. And yet again,MS Tech ed India is coming on 23-25 march  in Banglore,India.Well,the place is  ofcourse right suited for any IT/Computing conference.After all,Its Silicon Valley of India.. From Last year.I remember  a session by Harish about  “Building pure client side apps with  Jquery and Microsoft Ajax .” Here’s the video: http://live.viasilverlight.com/TechEdOnDemand/Breakouts/TheWebSimplified1/Session4/AjaxClientSideApps.wmv At that time only,I got to know that jquery is so easy to use for  ajax or client side templating.Though I prefer jquery over  Microsoft Ajax many folds.UpdatePanel  is Dead for sure in my view. I believe,Web forms will be dead sooner or later with ASP.Net  MVC  gaining share many folds.(TODO:Learn MVC). The new standard is surely:JQUERY . Between,Last years videos and ppt’s  are available to browse and download: http://microsoftteched.in/2010/downloads.aspx After going through Tech Ad 2011 session agendas : http://www.microsoft.com/india/teched2011/agenda.aspx Few of my personal choices to watch would be: Day 1: a) Identity And Access Control in the Cloud        b)Windows 7 at  Home:Digitizing your Home.(Sounds cool.)        c) And ofcourse,Jquery and MS ajax(Lets see if MS can do something that’s not already happening with their version Of Ajax).. Day 2:  a) Lap Around Silverlight 5 and Html 5 as I have heard some hot talks that html5 will kill Silverlight,(I don’t see it in near future though).        b) Html 5 more than “Html 5”…Google will be seeing this one. Day3: a) Cross Browser applications in Azure       b)VS 2010 sessions of automated testing azure apps etc. Windows Phone 7 sessions will surely be of more interest now after MS-Nokia Deal. Though,Personally,I would want atleast some worth of  sessions on MS  future in Robotics,AI.Perhaps  I am looking at wrong place..(When is PDC?) And Since,Bill Gates  consider Robotics as the next big thing, Refer  this one : http://www.cs.virginia.edu/robins/A_Robot_in_Every_Home.pdf  I am sure,they wont loose this new hot spot to competitors,  like how google rules in Online  Search now.Robotics and AI will surely provide a big battlefield  for future.See,What IBM is doing with IBM Watson. OR see this, http://www.sciencedaily.com/releases/2011/02/110218083711.htm this is cool only if you can control your mind.Atleast,I’ll prefer regular driving (I would devote my mind seeing  people,places which we see on road).thats what jouney makes “cool”.:P.

  Read the article

• How do I calculate the boundary of the game window after transforming the view?

  - by Cypher

  My Camera class handles zoom, rotation, and of course panning. It's invoked through SpriteBatch.Begin, like so many other XNA 2D camera classes. It calculates the view Matrix like so: public Matrix GetViewMatrix() { return Matrix.Identity * Matrix.CreateTranslation(new Vector3(-this.Spatial.Position, 0.0f)) * Matrix.CreateTranslation(-( this.viewport.Width / 2 ), -( this.viewport.Height / 2 ), 0.0f) * Matrix.CreateRotationZ(this.Rotation) * Matrix.CreateScale(this.Scale, this.Scale, 1.0f) * Matrix.CreateTranslation(this.viewport.Width * 0.5f, this.viewport.Height * 0.5f, 0.0f); } I was having a minor issue with performance, which after doing some profiling, led me to apply a culling feature to my rendering system. It used to, before I implemented the camera's zoom feature, simply grab the camera's boundaries and cull any game objects that did not intersect with the camera. However, after giving the camera the ability to zoom, that no longer works. The reason why is visible in the screenshot below. The navy blue rectangle represents the camera's boundaries when zoomed out all the way (Camera.Scale = 0.5f). So, when zoomed out, game objects are culled before they reach the boundaries of the window. The camera's width and height are determined by the Viewport properties of the same name (maybe this is my mistake? I wasn't expecting the camera to "resize" like this). What I'm trying to calculate is a Rectangle that defines the boundaries of the screen, as indicated by my awesome blue arrows, even after the camera is rotated, scaled, or panned. Here is how I've more recently found out how not to do it: public Rectangle CullingRegion { get { Rectangle region = Rectangle.Empty; Vector2 size = this.Spatial.Size; size *= 1 / this.Scale; Vector2 position = this.Spatial.Position; position = Vector2.Transform(position, this.Inverse); region.X = (int)position.X; region.Y = (int)position.Y; region.Width = (int)size.X; region.Height = (int)size.Y; return region; } } It seems to calculate the right size, but when I render this region, it moves around which will obviously cause problems. It needs to be "static", so to speak. It's also obscenely slow, which causes more of a problem than it solves. What am I missing?

  Read the article

• Creating the Completely Customized World Just for YOU

  - by divya.malik

  OK so not a customized world, but do you know what goes into creating that customized web store front for you? How do you get those additional offers from vendors when you call in for service or when you are browsing a storefront. This is what is has been happening behind the scenes.  When a customer calls in a contact center for service, at the end of the conversation, they are offered a new product, or service. But what just transpired was that the CRM system that was in place had routed the call to the right agent, the agent got the pop up screen with the customer information, and the call request  was handled. Then came the decision point to cross-sell and up-sell, The agent got some recommended offers that were created based on analyzed data (this data had been put into a data warehouse, modeled, profiled and rules were implemented e.g.. People with profile X like product Y).  But with this system, what happens is that analytics can be applied to a very small subset. Now comes Real Time Decisioning (RTD), this helps companies make optimal decisions in the context of transactional systems. It enables companies to improve business processes with real time intelligence on every single transaction. RTD is like a service plug-in that you put at the back of your transactional systems and that you  ping to get a recommendation.  It listens to business process flows and data moving through the process, getting all that data, processes all that you can do with that data, and gives out out various offers. It takes a process centric view of analytics rather than just a data centric view. It continuously observes and learns from ever-changing customer behavior and applies those insights to providing real-time decisions and recommendations at any customer touch point. At Oracle we define Real Time Decisioning as “ The solution that addresses a business issue faced by all organizations : how to make accurate decisions, using the most up to date information, in real time…consistently and in large volumes”. Here is a video on recommendation engines that are benefiting from real time decisioning today and see how it is helping online vendors.

  Read the article

• ArchBeat Link-o-Rama for 2012-05-31

  - by Bob Rhubart

  Eclipse DemoCamp - June 2012 - Redwood Shores, CA wiki.eclipse.org Oracle HQ 10 Twin Dolphin Dr. Redwood Shores, CA Presentations: The evolution of Java persistence, Doug Clarke, EclipseLink Project Lead, Oracle Eclipse Project Sapphire, Konstantin Komissarchik, Sapphire Project Lead, Oracle Developing Rich ADF Applications with Java EE, Greg Stachnick, Oracle Leveraging OSGi In The Enterprise, Kamal Muralidharan, Lead Engineer, eBay NVIDIA Nsight Eclipse Edition, Goodwin (Tech lead - Visual tools), Eugene Ostroukhov (Senior engineer – Visual tools)   BI Architecture Master Class for Partners - Oracle Architecture Unplugged blogs.oracle.com June 21, 2012 This workshop will be highly interactive and is aimed at Oracle OPN member partners who are IT Architects and BI+W specialists. This will be a highly interactive session and does not involve slide presentations or product feature details, it addresses IT-Architectural issues and considerations for the IT-Architect Community. 2012 Oracle Fusion Middleware Innovation Awards - Win a FREE Pass to Oracle OpenWorld 2012 in SF www.oracle.com Share your use of Oracle Fusion Middleware solutions and how they help your organization drive business innovation. You just might win a free pass to Oracle Openworld 2012 in San Francisco. Deadline for submissions in July 17, 2012. IT professionals: Very much the time to change our approach | Andy Mulholland www.capgemini.com This final post by retiring Capgemini CTO blogger Andy Mulholland is a must-read for anyone in IT. 10 Great WebCenter Sites Resources (FatWire) | John Brunswick www.johnbrunswick.com John Brunswick shares "some good resources that span the WebCenter Sites and FatWire brands, to get a consolidated list of helpful destinations for ongoing education." Cloning a WebCenter Portal Managed Server | Maiko Rocha blogs.oracle.com WebCenter and ADF A-Team blogger Maiko Rocha shows how to easily add a new managed server to a single-node domain to make it a cluster. Sorting and Filtering By Model-Based LOV Display Value | Steven Davelaar blogs.oracle.com How-to by WebCenter and ADF A-Team blogger Steven Davelaar. Designing and Developing Cross-Cutting Features | Stephen Rylander www.infoq.com Architects are often tasked with a business feature that must span systems. This article by will provide strategies to handle the change and guide your thinking about separating system boundaries and what that means for your technical design. Thought for the Day "A committee is a group of people who individually can do nothing, but who, as a group, can meet and decide that nothing can be done." — Fred Allen (5/31/1894 – 3/17/1956) Source: Brainy Quote

  Read the article

• Ubuntu won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Arcball 3D camera - how to convert from camera to object coordinates

  - by user38873

  I have checked multiple threads before posting, but i havent been able to figure this one out. Ok so i have been following this tutorial, but im not using glm, ive been implementing everything up until now, like lookat etc. http://en.wikibooks.org/wiki/OpenGL_Programming/Modern_OpenGL_Tutorial_Arcball So i can rotate with the click and drag of the mouse, but when i rotate 90º degrees around Y and then move the mouse upwards or donwwards, it rotates on the wrong axis, this problem is demonstrated on this part of the tutorial An extra trick is converting the rotation axis from camera coordinates to object coordinates. It's useful when the camera and object are placed differently. For instace, if you rotate the object by 90° on the Y axis ("turn its head" to the right), then perform a vertical move with your mouse, you make a rotation on the camera X axis, but it should become a rotation on the Z axis (plane barrel roll) for the object. By converting the axis in object coordinates, the rotation will respect that the user work in camera coordinates (WYSIWYG). To transform from camera to object coordinates, we take the inverse of the MV matrix (from the MVP matrix triplet). What i have to do acording to the tutorial is convert my axis_in_camera_coordinates to object coordinates, and the rotation is done well, but im confused on what matrix i use to do just that. The tutorial talks about converting the axis from camera to object coordinates by using the inverse of the MV. Then it shows these 3 lines of code witch i havent been able to understand. glm::mat3 camera2object = glm::inverse(glm::mat3(transforms[MODE_CAMERA]) * glm::mat3(mesh.object2world)); glm::vec3 axis_in_object_coord = camera2object * axis_in_camera_coord; So what do i aply to my calculated axis?, the inverse of what, i supose the inverse of the model view? So my question is how do you transform camera axis to object axis. Do i apply the inverse of the lookat matrix? My code: if (cur_mx != last_mx || cur_my != last_my) { va = get_arcball_vector(last_mx, last_my); vb = get_arcball_vector( cur_mx, cur_my); angle = acos(min(1.0f, dotProduct(va, vb)))*20; axis_in_camera_coord = crossProduct(va, vb); axis.x = axis_in_camera_coord[0]; axis.y = axis_in_camera_coord[1]; axis.z = axis_in_camera_coord[2]; axis.w = 1.0f; last_mx = cur_mx; last_my = cur_my; } Quaternion q = qFromAngleAxis(angle, axis); Matrix m; qGLMatrix(q,m); vi = mMultiply(m, vi); up = mMultiply(m, up); ViewMatrix = ogLookAt(vi.x, vi.y, vi.z,0,0,0,up.x,up.y,up.z);

  Read the article

• How to build a 4x game?

  - by Marco

  I'm trying to study how succefully implement a 4x game. Area of interest: 1) map data: how to store stellars systems (graphs?), how to generate them and so on.. 2) multiplayer: how to organize code in a non graphical server and a client to display it 3) command system: what are patters to catch user and ai decisions and handle them, adding at first "explore" and "colonize" then "combat", "research", "spy" and so on (commands can affect ships, planets, research, etc..) 4) ai system: ai can use commands to expand, upgrade planets and ship I know is a big questions, so help is appreciated :D 1) Map data Best choice is have a graph to model a galaxy. A node is a stellar system and every system have a list of planets. Ship cannot travel outside of predefined paths, like in Ascendancy: http://www.abandonia.com/files/games/221/Ascendancy_2.png Every connection between two stellar systems have a cost, in turns. Generate a galaxy is only a matter of: - dimension: number of stellar systems, - variety: randomize number of planets and types (desertic, earth, etc..), - positions of each stellar system on game space - connections: assure that exist a path between every node, so graph is "connected" (not sure if this a matematically correct term) 2) Multiplayer Game is organized in turns: player 1, player 2, ai1, ai2. Server take care of all data and clients just diplay it and collect data change. Because is a turn game, latency is not a problem :D 3) Command system I would like to design a hierarchy of commands to take care of this aspect: abstract Genericcommand (target) ExploreCommand (Ship) extends genericcommand colonizeCommand (Ship) buildcommand(planet, object) and so on. In my head all this commands are stored in a queue for every planets, ships or reasearch center or spy, and each turn a command is sent to a server to apply command and change data state 4) ai system I don't have any idea about this. Is a big topic and what I want is a simple ai. Something like "expand and fight against everyone". I think about a behaviour tree to control ai moves, so I can develop an ai that try to build ships to expand and then colonize planets, upgrade them throught science and combat enemies. Could be done with a finite state machine too ? any ideas, resources, article are welcome!

  Read the article

• Spotlight on RIVA: CRM integration for Oracle CRM on Demand and Microsoft Exchange

  - by Richard Lefebvre

  Introducing Riva from Omni - an Oracle ISV partner specializing in Enterprise Management and Integration Solutions Riva delivers advanced, server-side integration for Oracle CRM On Demand and Microsoft Exchange or even Novell GroupWise. Riva allows Oracle customers to go beyond the standard Outlook plug-in to deliver additional value for the end user as they interact between Outlook and CRM On Demand. Riva syncs CRM On Demand to ALL Exchange mail apps, not just Windows Outlook.  So, whether customers are using Outlook 2010, Outlook Web Access (web client), Outlook 2011 for Mac, Apple Mail, Outlook on Citrix  or a mobile device, Riva's got them covered. There are no plug-ins to be installed, configured, managed and maintained on users' desktops, laptops as Riva delivers Server-side synchronisation for CRMOD and Exchange. The automation of CRM and Outlook integration will remove the reliance upon users to synchronise between the two with Riva handling this process. Riva allows administrators to define sync policies and apply them to individuals or groups of users depending on their sync requirements. Administrators will be able to determine and manage the exposure of the most pertinent detail to be synchronised between Outlook and CRM On Demand. Custom and organic contact filtering for large deployments i.e. Based on ownership, groupings and contact frequency, filters can be applied on what contact records are shared with the users. Riva provides the capability to synchronise CRM and Outlook beyond Contacts, Calendar entries and Email. The synchronisation can be extended to cater for  opportunities, quotes and custom objects for example within the Outlook interface. Riva SmartConvert Folders can automate the creation of opportunities and associated contacts for example if they don't already exist. This can facilitate a reduction in manual detail entry through quick association whilst also benefiting user adoption. From a mobile perspective, Riva allows users to view and manage their CRM On Demand contacts, calendar, tasks, opportunities and cases from iPad, iPhone, Android and BlackBerry devices.  Again, there are no mobile apps or additional plugins to install, configure or manage. We sync CRM On Demand to Exchange.  Because the mobile device is connected to an Exchange mailbox, the information automatically syncs down to the native address book, calendar and mail apps on the smartphone or tablet. Riva Datasheet for CRM On Demand Riva Brochure – Oracle CRM On Demand  Technical Knowledgebase & Riva Trial  http://kb.omni-ts.com/47/ Comparison to Outlook Plug-ins Riva Diagram – Riva Comparison with Outlook Plug-ins Contact: Wolfgang Berger - [email protected]

  Read the article

• Simple method for reliably detecting code in text?

  - by Jeff Atwood

  GMail has this feature where it will warn you if you try to send an email that it thinks might have an attachment. Because GMail detected the string see the attached in the email, but no actual attachment, it warns me with an OK / Cancel dialog when I click the Send button. We have a related problem on Stack Overflow. That is, when a user enters a post like this one: my problem is I need to change the database but I don't won't to create a new connection. example: DataSet dsMasterInfo = new DataSet(); Database db = DatabaseFactory.CreateDatabase("ConnectionString"); DbCommand dbCommand = db.GetStoredProcCommand("uspGetMasterName"); This user did not format their code as code! That is, they didn't indent by 4 spaces per Markdown, or use the code button (or the keyboard shortcut ctrl+k) which does that for them. Thus, our system is accreting a lot of edits where people have to go in and manually format code for people that are somehow unable to figure this out. This leads to a lot of bellyaching. We've improved the editor help several times, but short of driving over to the user's house and pressing the correct buttons on their keyboard for them, we're at a loss to see what to do next. That's why we are considering a Google GMail style warning: Did you mean to post code? You wrote stuff that we think looks like code, but you didn't format it as code by indenting 4 spaces, using the toolbar code button or the ctrl+k code formatting command. However, presenting this warning requires us to detect the presence of what we think is unformatted code in a question. What is a simple, semi-reliable way of doing this? Per Markdown, code is always indented by 4 spaces or within backticks, so anything correctly formatted can be discarded from the check immediately. This is only a warning and it will only apply to low-reputation users asking their first questions (or providing their first answers), so some false positives are OK, so long as they are about 5% or less. Questions on Stack Overflow can be in any language, though we can realistically limit our check to, say, the "big ten" languages. Per the tags page that would be C#, Java, PHP, JavaScript, Objective-C, C, C++, Python, Ruby. Use the Stack Overflow creative commons data dump to audit your potential solution (or just pick a few questions in the top 10 tags on Stack Overflow) and see how it does. Pseudocode is fine, but we use c# if you want to be extra friendly. The simpler the better (so long as it works). KISS! If your solution requires us to attempt to compile posts in 10 different compilers, or an army of people to manually train a bayesian inference engine, that's ... not exactly what we had in mind.

  Read the article

• New Source Database Added for EBS 12 + 11gR2 Transportable Tablespaces

  - by John Abraham

  The Transportable Tablespaces (TTS) process was originally certified for the migration of E-Business Suite R12 databases going from a source database of 11gR1 or 11gR2 to a target of 11gR2. This requirement has now been expanded to include a source database of 10gR2 (10.2.0.5) - this will potentially save time for existing 10gR2 customers as they can remove on a crucial upgrade step prior to performing the platform migration. The migration process requires an updated Controlled patch delivered by the Oracle E-Business Suite Platform Engineering team, i.e. it requires a password obtainable from Oracle Support. We released the patch in this manner to gauge uptake, and help identify and monitor any customer issues due to the nature of this technology. This patch has been updated to now include supporting 10gR2 as a source database. Does it meet your requirements?Note that for migration across platforms of the same "endian" format, users are advised to use the Transportable Database (TDB) migration process instead for large databases. The "endian-ness" target platforms can be verified by querying the view V$DB_TRANSPORTABLE_PLATFORM using SQL*Plus (connected as sysdba) on the source platform:SQL>select platform_name from v$db_transportable_platform;If the intended target platform does not appear in the output, it means that it is of a different endian format from the source. Consequently. database migration will need to be performed via Transportable Tablespaces (for large databases) or export/import.The use of Transportable Tablespaces can greatly speed up the migration of the data portion of the database. However, it does not affect metadata, which must still be migrated using export/import. We recommend that users initially perform a test migration on their database, using export/import with the 'metrics=y' parameter. This will help identify the relative amounts of data and metadata, and provide a basis for assessing likely gains in timing. In general, the larger the amount of data (compared to metadata), the greater the reduction in downtime that can be expected from using TTS as a migration process. For smaller databases or for those that have relatively small data compared to metadata, TTS will not be as beneficial for cross endian migration and the use of export/import (datapump) for the whole database is recommended. Where can I find more information? Using Transportable Tablespaces to Migrate Oracle E-Business Suite Release 12 Using Oracle Database 11g Release 2 Enterprise Edition (My Oracle Support Document 1311487.1) Oracle Database Administrator's Guide 11g Release 2 (11.2) Related Articles Database Migration using 11gR2 Transportable Tablespaces Now Certified for EBS 12 New Source Databases Added for Transportable Tablespaces + EBS 11i 10gR2 Transportable Tablespaces Certified for EBS 11i Migrating E-Business Suite Release 11i Databases Between Platforms Migrating E-Business Suite Release 12 Databases Between Platforms

  Read the article

• Bay Area Coherence Special Interest Group Next Meeting July 21, 2011

  - by csoto

  Date: Thursday, July 21, 2011 Time: 4:30pm - 8:15pm ET (note that Parking at 475 Sansome Closes at 8:30pm) Where: Oracle Office, 475 Sansome Street, San Francisco, CA Google Map We will be providing snacks and beverages. Register! - Registration is required for building security. Presentation Line Up:? 5:10pm - Batch Processing Using Coherence in Oracle Group Policy Administration - Paul Cleary, Oracle Oracle Insurance Policy Administration (OIPA) is a flexible, rules-based policy administration solution that provides full record keeping for all policy lifecycle transactions. One component of OIPA is Cycle processing, which is the batch processing of pending insurance transactions. This presentation introduces OIPA and Cycle processing, describing the unique challenges of processing a high volume of transactions within strict time windows. It then reviews how OIPA uses Oracle Coherence and the Processing Pattern to meet these challenges, describing implementation specifics that highlight the simplicity and robustness of the Processing Pattern. 6:10pm - Secure, Optimize, and Load Balance Coherence with F5 - Chris Akker, F5 F5 Networks, Inc., the global leader in Application Delivery Networking, helps the world’s largest enterprises and service providers realize the full value of virtualization, cloud computing, and on-demand IT. Recently, F5 and Oracle partnered to deliver a novel solution that integrates Oracle Coherence 3.7 with F5 BIG-IP Local Traffic Manager (LTM). This session will introduce F5 and how you can leverage BIG-IP LTM to secure, optimize, and load balance application traffic generated from Coherence*Extend clients across any number of servers in a cluster and to hardware-accelerate CPU-intensive SSL encryption. 7:10pm - Using Oracle Coherence to Enable Database Partitioning and DC Level Fault Tolerance - Alexei Ragozin, Independent Consultant and Brian Oliver, Oracle Partitioning is a very powerful technique for scaling database centric applications. One tricky part of partitioned architecture is routing of requests to the right database. The routing layer (routing table) should know the right database instance for each attribute which may be used for routing (e.g. account id, login, email, etc): it should be fast, it should fault tolerant and it should scale. All the above makes Oracle Coherence a natural choice for implementing such routing tables in partitioned architectures. This presentation will cover synchronization of the grid with multiple databases, conflict resolution, cross cluster replication and other aspects related to implementing robust partitioned architecture. Additional Info:?? - Download Past Presentations: The presentations from the previous meetings of the BACSIG are available for download here. Click on the presentation titles to download the PDF files. - Join the Coherence online community on our Oracle Coherence Users Group on LinkedIn. - Contact BACSIG with any comments, questions, presentation proposals and content suggestions.

  Read the article

• How can I set the date format to my country setting?

  - by Jamina Meissner

  I am German, but I use only English software. Hence, I am also using English Ubuntu. It's not because I don't know how to install German Ubuntu. It's because I prefer to work with English software environment. However, I would like to keep date & time format in German format, just as I use a German keyboard layout in English Ubuntu. I can set the time format to 24h time. But how can I set the date format to German time format? It is irritating for me to have the day number before the time numbers: In other words, instead of "Oct 14 15:16" I want it to display "14 Okt" or (if only English language is available) "14 Oct 15:16" or "14th Oct 15:16". At least, the number of the day should be displayed before the month. In Windows, it was no problem to choose time/date/currency settings according to a chosen country. Where can I do this in Ubuntu? The best would be if I could freely enter the date/time format myself with variables (DD.MM hh.mm.ss etc). I found answers for Ubuntu 11.04, but not for Ubuntu 12.04. I am using Ubuntu 12.04, 64-bit. Keep in mind that I am a beginner. So I'd like to be able to do this via GUI, if possible. EDIT: I found the answer in a forum. Go to System Settings... and choose Language Support. There are two tabs, Language and Reginal Formats. You are by default on the Language tab. On the Language tab, click Install / Remove Languages. A window with a list of languages opens. Mark the language(s) you want to add for your time/date/currency format. Click Apply Changes. Ubuntu will now download and install the additional language files, as well as help files of other applications in this language. So don't be irritated. When Ubuntu has finished applying the changes, switch to Regional Formats tab. (Do not change the Language for menus and windows on the Language tab if you only want to change the date/time/unit format). There you can choose from the dropdown list the language for your preferred format for date/time/currency/unit. Log out and log in again to have the changes take effect.

  Read the article

• Cooking with Wessty: WordPress and HTML 5

  - by David Wesst

  WordPress is easily one, if not the most, popular blogging platforms on the web. With the release of WordPress 3.x, the potential for what you can do with this open source software is limitless. This technique intends to show you how to get your WordPress wielding the power of the future web, that being HTML 5. --- Ingredients WordPress 3.x Your favourite HTML 5 compliant browser (e.g. Internet Explorer 9) Directions Setup WordPress on your server or host. Note: You can setup a WordPress.com account, but you will require an paid add-on to really take advantage of this technique.Login to the administration panel. Login to the administration section of your blog, using your web browser.  On the left side of the page, click the Appearance heading. Then, click on Themes. At the top of the page, select the Install Themes tab. In the search box, type the “toolbox” and click search. In the search results, you should see an theme called Toolbox. Click the Install link in the Toolbox item. A dialog window should appear with a sample picture of what the theme looks like. Click on the Install Now button in the bottom right corner. Et voila! Once the installation is done, you are done and ready to bring your blog into the future of the web. Try previewing your blog in HTML 5 by clicking the preview link.   Now, you are probably thinking “Man…HTML 5 looks like junk”. To that, I respond: “HTML was never why your site looked good in the first place. It was the CSS.” Now you have an un-stylized theme that uses HTML 5 elements throughout your WordPress site. If you want to learn how to apply CSS to your WordPress blog, you should check out the WordPress codex that pretty much covers everything there is to cover about WordPress development. Now, remember how we noted earlier that your free WordPress.com account wouldn’t take advantage of this technique? That is because, as of the time of this writing, you needed to pay a fee to use custom CSS. Remember now, this only gives you the foundation to create your own HTML 5 WordPress site. There are some HTML 5 themes out there that already look good, and were built using this as the foundation and added some CSS 3 to really spice it up. Looking forward to seeing more HTML 5 WordPress sites! Enjoy developing the future of the web. Resources Toolbox Theme JustCSS Theme WordPress Installation Tutorial WordPress Theme Development Tutorial This post also appears at http://david.wes.st

  Read the article

• Databases and Beer

  - by Johnm

  It is a bit of a no-brainer: Include the word "beer" in a subject line of an e-mail or blog post title and you can be certain that it will be read. While there are times this practice might be a ploy to increase readership, it is not the case for this blog post. There is inspiration that can be drawn from other industries to which we, as database professionals, can apply in our industry. In this post I will highlight one of my favorite participants of the brewing industry. The Boston Beer Company started in the 1970s in Boston, Massachusetts. Others may be more familiar with this company through their Samuel Adams Boston Lager and other various seasonal beers. I am continually inspired by their commitment to mastery of the brewing process to which they evangelize frequently in their commercials. They also are continually in pursuit of pushing the boundaries of beer as we know it while working within traditional constraints. A recent example of this is their collaboration with Weihenstephan Brewery of Munich, Germany to produce the soon to be released Infinium beer. This beer, while brewed as an ale, is touted as something closer to something like Champaign - all while complying with the Reinheitsgebot. The Reinheitsgebot is also known as the "German Beer Purity Law" which was originated in 1516. This law states that beer is to consist of water, barley, hops and yeast. That's it. Quite a limiting constraint indeed. and yet, The Boston Beer Company pushed forward. Much like the process of brewing, the discipline of database design and architecture is one that is continually in process and driven by the pursuit of mastery. While we do not have purity laws to constrain us, we have many other types: best practices, company policies, government regulations, security and budgets. Through our fellow comrades, we discuss the challenges and constraints in which we operate. We boil down the principles and theories that define our profession. We reassemble these into something that is complementary to the business needs that we must fulfill. As a result, it is not uncommon to see something amazingly innovative in a small business who is pushing the boundaries of their database well beyond its intended state. It is equally common to see innovation in the use of features available in the more advanced features of databases that are found in large businesses. The tag line for The Boston Beer Company is: "Take Pride In Your Beer.", I would like to offer an alternative and say "Take Pride In Your Database." So, As you pour your next Boston Lager into a frosted glass, consider those who spend their lives mastering the craft of brewing and strive to interject their spirit into everything that you do as a database professional. Cheers!

  Read the article

• Configuring the iPlanet as web tier for Oracle WebCenter Content (UCM)

  - by Adao Junior

  If you are looking for configure the iPlanet as Web server/proxy to use with the Oracle WebCenter Content, you probably won’t found an specific documentation for that or will found some old complex notes related to the old 10gR3. This post will help you out with few simple steps. That’s the diagram of the test scenario, considering that you will deploy in production in an cluster environment. First you need the software, for our scenario you will need: - Oracle iPlanet Web Server 7.0.15+ (Installed) - Oracle WebCenter Content 11gR1 PS5 (Installed) - Oracle WebLogic Web Server Plugins 11g (1.1) - Supported JDK (Using Oracle Java JDK 7u4 for the test) - Certified Client OS - Certified Server OS (Using Oracle Solaris 11 for the test) - Certified Database (Using Oracle Database 11.2.0.3 for the test) Then the configuration: - Download the latest plugin: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html - Extract the WLSPlugin11g-iPlanet7.0 in some folder, like <iPlanet_Home>/plugins/wls11 - Include the plugin reference to the magnus.conf: If Unix (Solaris or Linux), include the line: Init fn="load-modules" shlib="/apps/oracle/WebServer7/plugins/wls11/lib/mod_wl.so" If Windows, Include the line:        Init fn="load-modules" shlib="D:\\oracle\\WebServer7\\plugins\\wls11\\lib\\mod_wl.dll" - Include the proxy reference to the obj.conf of each instance: <Object name="weblogic" ppath="*/cs/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_dav/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_ocsh/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/adfAuthentication/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> If you are using an single node setup, change the Service fn=…. line to something like: Service fn="wl-proxy" WebLogicHost=<wcc-server> WebLogicPort=16200 With these configurations, your should have the WebCenter Content UI working with the iPlanet, test it. [http://<web-server>/cs/] With the UI working, the last step is to configure the WebDav: - Go to the iPlanet Admin Console (usually https://<web-server>:8989) - Go to Configurations >> [instance] >> Virtual Servers >> [Virtual Server] >> WebDAV: - Click New - Populate the URI with /cs/idcplg/webdav: - Select “Anyone (No Authentication)”, the wc Content will take care of the security: This will allow you to use the WebDav feature and the Desktop Integration Suite, including double-byte characters. Anothers iPlanet tunes could be done, I can cover in the next post related to the iPlanet. Cross-posted on the ContentrA.com Blog Related posts:  - Using a Web Proxy Server with WebCenter Family

  Read the article

• Strange rendering in XNA/Monogame

  - by Gerhman

  I am trying to render G-Code generated for a 3d-printer as the printed product by reading the file as line segments and the drawing cylinders with the diameter of the filament around the segment. I think I have managed to do this part right because the vertex I am sending to the graphics device appear to have been processed correctly. My problem I think lies somewhere in the rendering. What basically happens is that when I start rotating my model in the X or Y axis then it renders perfectly for half of the rotation but then for the other half it has this weird effect where you start seeing through the outer filament into some of the shapes inside. This effect is the strongest with X rotations though. Here is a picture of the part of the rotation that looks correct: And here is one that looks horrible: I am still quite new to XNA and/Monogame and 3d programming as a whole. I have no idea what could possibly be causing this and even less of an idea of what this type of behavior is called. I am guessing this has something to do with rendering so have added the code for that part: protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Black); basicEffect.World = world; basicEffect.View = view; basicEffect.Projection = projection; basicEffect.VertexColorEnabled = true; basicEffect.EnableDefaultLighting(); GraphicsDevice.SetVertexBuffer(vertexBuffer); RasterizerState rasterizerState = new RasterizerState(); rasterizerState.CullMode = CullMode.CullClockwiseFace; rasterizerState.ScissorTestEnable = true; GraphicsDevice.RasterizerState = rasterizerState; foreach (EffectPass pass in basicEffect.CurrentTechnique.Passes) { pass.Apply(); GraphicsDevice.DrawPrimitives(PrimitiveType.TriangleList, 0, vertexBuffer.VertexCount); } base.Draw(gameTime); } I don't know if it could be because I am shading something that does not really have a texture. I am using this custom vertex declaration I found on some tutorial that allows me to store a vertex with a position, color and normal: public struct VertexPositionColorNormal { public Vector3 Position; public Color Color; public Vector3 Normal; public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration ( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); } If any of you have ever seen this type of thing please help. Also, if you think that the problem might lay somewhere else in my code then please just request what part you would like to see in the comments section.

  Read the article

• Devoxx 2011: Java EE 6 Hands-on Lab Delivered

  - by arungupta

  I, along with Alexis's help, delivered a Java EE 6 hands-on lab to a packed room of about 40+ attendees at Devoxx 2011. The lab was derived from the OTN Developer Days 2012 version but added lot more content to showcase several Java EE 6 technologies. The problem statement from the lab document states: This hands-on lab builds a typical 3-tier Java EE 6 Web application that retrieves customer information from a database and displays it in a Web page. The application also allows new customers to be added to the database as well. The string-based and type-safe queries are used to query and add rows to the database. Each row in the database table is published as a RESTful resource and is then accessed programmatically. Typical design patterns required by a Web application like validation, caching, observer, partial page rendering, and cross-cutting concerns like logging are explained and implemented using different Java EE 6 technologies. The lab covered Java Persistence API 2, Servlet 3, Enterprise JavaBeans 3.1, JavaServer Faces 2, Java API for RESTful Web Services 1.1, Contexts and Dependency Injection 1.0, and Bean Validation 1.0 over 47 pages of detailed self-paced instructions. Here is the complete Table of Contents: The lab can be downloaded from here and requires only NetBeans IDE "All" or "Java EE" version, which includes GlassFish anyway. All the feedback received from the lab has been incorporated in the instructions and bugs filed (Updated 49559, 205232, 205248, 205256). 80% of the attendees could easily complete the lab and some even completed in much less than 3 hours. That indicates that either more content needs to be added to the lab or the intellectual level of the attendees at the conference was pretty high. I think the lab has enough content for 3 hours but we moved at a much more faster pace so I conclude on the latter. Truly a joy to conduct a lab to 40 Devoxxians! Another related lab that might be handy for folks is "Develop, Deploy, and Monitor your Java EE 6 applications using GlassFish 3.1 Cluster". It explains how: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete lab instructions and source code are available and you can try them. I plan to continue evolving the contents for the Java EE 6 hands-on lab to cover more technologies and features and will announce them on this blog. Let me know on what else would you like to see in the future versions.

  Read the article

• Devoxx 2011: Java EE 6 Hands-on Lab Delivered

  - by arungupta

  I, along with Alexis's help, delivered a Java EE 6 hands-on lab to a packed room of about 40+ attendees at Devoxx 2011. The lab was derived from the OTN Developer Days 2012 version but added lot more content to showcase several Java EE 6 technologies. The problem statement from the lab document states: This hands-on lab builds a typical 3-tier Java EE 6 Web application that retrieves customer information from a database and displays it in a Web page. The application also allows new customers to be added to the database as well. The string-based and type-safe queries are used to query and add rows to the database. Each row in the database table is published as a RESTful resource and is then accessed programmatically. Typical design patterns required by a Web application like validation, caching, observer, partial page rendering, and cross-cutting concerns like logging are explained and implemented using different Java EE 6 technologies. The lab covered Java Persistence API 2, Servlet 3, Enterprise JavaBeans 3.1, JavaServer Faces 2, Java API for RESTful Web Services 1.1, Contexts and Dependency Injection 1.0, and Bean Validation 1.0 over 47 pages of detailed self-paced instructions. Here is the complete Table of Contents: The lab can be downloaded from here and requires only NetBeans IDE "All" or "Java EE" version, which includes GlassFish anyway. All the feedback received from the lab has been incorporated in the instructions and bugs filed (Updated 49559, 205232, 205248, 205256). 80% of the attendees could easily complete the lab and some even completed in much less than 3 hours. That indicates that either more content needs to be added to the lab or the intellectual level of the attendees at the conference was pretty high. I think the lab has enough content for 3 hours but we moved at a much more faster pace so I conclude on the latter. Truly a joy to conduct a lab to 40 Devoxxians! Another related lab that might be handy for folks is "Develop, Deploy, and Monitor your Java EE 6 applications using GlassFish 3.1 Cluster". It explains how: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete lab instructions and source code are available and you can try them. I plan to continue evolving the contents for the Java EE 6 hands-on lab to cover more technologies and features and will announce them on this blog. Let me know on what else would you like to see in the future versions.

  Read the article

• Finding work as a college student

  - by lightburst

  I'm a 3rd year CS student. I'm currently really, really, bored and tired of cheap school programming(I go to a fairly respectable(albeit not top) university in my country, but, really, it's not MIT) so I've been thinking about getting a part-time dev job for a long while now. I'm not some hotshot programmer or anything, but "Add/Delete XYZ class objects to list" or "Do this web feature/pattern in PHP" does get old after a few semesters. I also only learned(heard?) of programming when I entered college, so the duration of me being in contact with any code is short. I can't really apply as an intern as I have not accumulated the necessary credits yet to do that so I was thinking of selling myself as a part-time dev. I still need to go to school, and don't want to subject myself to living two lives. Plus, I think I'd have better chances considering my lack of things to write on the resume. The only language I know at heart is C (I've written several pointer-oriented stuff on my freshman year, which is apparently pretty leet(for some reason), or so Joel says. That sort of boosted my morale a bit) but I've worked with several other languages only for the sake of course work such as C#/Java/PHP/ASM. My only user-worthy project was a recursive quicksort simulator I wrote for class using GTK+ that used a textbox to output the progress. I also have not taken the compiler theory class yet, or my thesis. All that being said, I wonder if any legitimate software company(big or small) would hire somebody like me considering all that. If there are companies that do accept anybody like me, would I be doing programming or maybe just be a tester or something? Would anybody hire me as a dev at all? I know I don't have much(not even a degree) but what I lack in experience, I compensate with interest? I am less interested in websites and 'management' software(no offense or anything. also, most of the places here ONLY have those), and more into 'process driven'(I'm not sure how to call it) and system software. I have my eyes on a startup that sells basically an extension of Google Drive, but I feel like I'm too 'risky' for them. Oh, I'm also 19 if that means anything. We're not K-12 so kids go to college earlier than in the US.

  Read the article

• How can I convert a 2D bitmap (Used for terrain) to a 2D polygon mesh for collision?

  - by Megadanxzero

  So I'm making an artillery type game, sort of similar to Worms with all the usual stuff like destructible terrain etc... and while I could use per-pixel collision that doesn't give me collision normals or anything like that. Converting it all to a mesh would also mean I could use an existing physics library, which would be better than anything I can make by myself. I've seen people mention doing this by using Marching Squares to get contours in the bitmap, but I can't find anything which mentions how to turn these into a mesh (Unless it refers to a 3D mesh with contour lines defining different heights, which is NOT what I want). At the moment I can get a basic Marching Squares contour which looks something like this (Where the grid-like lines in the background would be the Marching Squares 'cells'): That needs to be interpolated to get a smoother, more accurate result but that's the general idea. I had a couple ideas for how to turn this into a mesh, but many of them wouldn't work in certain cases, and the one which I thought would work perfectly has turned out to be very slow and I've not even finished it yet! Ideally I'd like whatever I end up using to be fast enough to do every frame for cases such as rapidly-firing weapons, or digging tools. I'm thinking there must be some kind of existing algorithm/technique for turning something like this into a mesh, but I can't seem to find anything. I've looked at some things like Delaunay Triangulation, but as far as I can tell that won't correctly handle concave shapes like the above example, and also wouldn't account for holes within the terrain. I'll go through the technique I came up with for comparison and I guess I'll see if anyone has a better idea. First of all interpolate the Marching Squares contour lines, creating vertices from the line ends, and getting vertices where lines cross cell edges (Important). Then, for each cell containing vertices create polygons by using 2 vertices, and a cell corner as the 3rd vertex (Probably the closest corner). Do this for each cell and I think you should have a mesh which accurately represents the original bitmap (Though there will only be polygons at the edges of the bitmap, and large filled in areas in between will be empty). The only problem with this is that it involves lopping through every pixel once for the initial Marching Squares, then looping through every cell (image height + 1 x image width + 1) at least twice, which ends up being really slow for any decently sized image...

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >