Search Results

Search found 8473 results on 339 pages for 'vodoo boot'.

Page 262/339 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Will my Lenovo One Key Recovery work if I install Ubuntu on my Ideapad U410?

  - by dostiharise

  I own a Lenovo Ideapad U410. Being a game developer the first thing that I wanted to do is install Ubuntu. But I don't want to lose the Windows 7 that ships with the laptop. So, I wanted to know if the Lenovo One Key Recovery mechanism is capable of restoring the Windows 7, from the hidden recovery partition, after I install Ubunutu and enable Grub boot loader? Note: I am already aware that an alternative would be to create Factory Restore disks, to restore when necessary. But I cannot immediately do it unless I buy an External DVD Burner.

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• Windows 7 safe mode pretends it's Windows XP?

  - by Joachim Kerschbaumer

  Just a question in between. A friend of mine brought me a laptop that does not work anymore and wanted me to check whether I can do something. She told me it's Windows 7, and startup screen and login screen look like it. However, as she gets a bluescreen on startup it is only possible to boot in safe mode where the system pretends to be Windows XP SP3. The system also may have 1 GB of RAM but the system itself states that it has 954 MB of RAM which is a value I've never seen before. Is everything corrupt from operating system to hardware, or am I just a newbie that does not know that Windows 7 pretends to be Windows XP SP3 in safe mode? Or is this laptop just the victim of an illegal, crazy copy of Windows XP sold as Windows 7? Maybe some strange Chinese stuff? I also recognized that the startup screen of Outlook Express reads "Outllok Express" (no typo) I´m kind of confused, maybe someone could put light into this ;)

  Read the article

• Writing an internal disk from IMG, what XP software to use?

  - by Andrew Swift

  I am trying to install the Chromium OS on an EEE PC 901, and I have succeeded in using Image Writer for Windows 0.2r23 to copy the IMG file to an SDHC card. Since the OS speed is limited by slow card access, I'd like to install the Chromium OS on the second, unused, internal SSD Drive, D:. However, Image Writer doesn't allow me to restore an internal drive from an IMG file. To be clear: I boot in XP on C: then run Image Writer to install the Chromium OS. Does anyone know how I can either convince Image Writer that D: is a removable drive or know of alternative program that will let me restore D: from an IMG file (non-windows file system)?

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• forced reformat without login / and bootcamp

  - by debug

  ok.. im pretty good with stuff like this, but I have a question. I have mac mini with 10.5.(x) on one partition, and bootcamp (windows) on the other. My boss wants me to reformat the whole mac (10.6 (x)), which is usually easy. He does not remember his password to login, which means I cannot log in and allocate the bootcamp back to one partition using Disk Utility, then reformat the whole drive. When I insert the Snow leopard CD, I can only wipe out one partition, my question is: Is there a way to force a wipe out of both drives in the boot sequence? Any help to wipe out this whole drive and do a clean install would be helpful.. Thanks superusers!

  Read the article

• How do I disable alert beeps

  - by wheresrhys

  My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I change in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

  Read the article

• How can I install OpenSolaris without Graphical Environment - just text console?

  - by Sanoj

  I would like to install OpenSolaris and use it as a home-server. I will interact with it just with SSH, so I don't need the Graphical Environment. How can I install OpenSolaris without the Graphical Environment? And preferably I would like to use the SSH-interface as much as possible, is it even possible to do the installation over SSH? I tried the SSH-boot alternative on the installation-CD, then I have to use a password, but I have no password since I haven't installed the system yet.

  Read the article

• Can one build a single disk RAID 1 array?

  - by Core Xii

  I have an Nvidia hardware RAID 1 array and need to reformat. But I don't have any spare storage media, so I need to get along with the 2 disks in the array. I figured I'd do as follows: Delete the array, so I have 2 separate but identical disks, A and B, with my files Put disk B aside Reformat disk A, build RAID 1 array with it, install Windows XP Put disk B back in Boot to Windows on disk A, copy my files from disk B to disk A Add disk B to the RAID 1 array, rebuild array And now I'd have a new RAID 1 array, fresh install and all my files intact (the ones I copied). Here are the parts I'm unsure about: Can I build a RAID 1 array using just one disk, then add the other one later? Can Windows on disk A see disk B and allow me to copy my files over?

  Read the article

• BSOD Error When Running Windows Phone Emulator

  - by Akshat Mittal

  I am getting a BSOD Error when Running Windows Phone 7.1 Emulator on Windows 7 Ultimate 64bit, Each time I run the Emulator, it Results in Blue Screen. This is a Fresh Install, This Error also Occurred with my last Windows Install (That is why I formatted the Windows Again), I have already Tried to Re-install it, it also shows "Windows Phone Emulator is Doing a Complete OS boot" (Even at Fresh Install, I know it happens when using Unlocked Emulator Images). I am not able to Test any of my app. Please Help !! EDIT: I am not Running a VM, it is on a Physical Machine.

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• How to perform diagnostics (stress test) on HP Smartarray Controller

  - by pepoluan

  At my office, we have a server that we suspect its RAID controller (HP Smartarray) is failing. A cold boot, however, does not indicate anything. Can anyone recommend me a method to stress-test the controller? Symptoms that makes me suspect a failing controller: Disk access getting slower, queue getting longer Running dmesg on the XenServer console I see many messages similar to this one: end_request: I/O error, dev tda, sector 253655584 (the sector number is never the same) When we move the VM to another physical host, we no longer see the above message Running idle (without any running VM), the dmesg no longer emit the above message A search on Google indicated that the above message is most commonly associated with a failing SmartArray controller. How can I be sure that the SmartArray controller is failing?

  Read the article

• diagnose "corrupt file" problems

  - by Matthew

  My computer has been crashing the last couple weeks pretty regularly (at least once a day). A lot of times things I do will display a little notification in the bottom right saying something about a corrupt file. (I'm on Windows XP Pro Service Pack 3). When the computer does crash I get the "blue screen of death" usually. Some of the notifications also advise running the chkdsk utility. I cannot get it to successfully run. Using the command prompt (or even the "tools" menu after right clicking the drive and choosing properties), it will not run the utility (it says "do you want to schedule it to run next boot time" or whatever, which I confirm). The problem is that most of the time after restarting, it doesn't run at all. The few times it does run, it has an error (I can't remember the error right now, it at least says it's ntfs and such) and says disk checking will end. How can I get it to successfully run?

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• CHKDSK always runs on Hyper-V image

  - by Dave

  I am having a problem with one of my VM's. Every time it boots, CHKDSK runs and finds no errors, but it goes into an endless loop (CHKDSK/Reboot/CHKDSK). The only way I can get Windows to boot is by cancelling the chkdsk. Is there any way I can tell windows to not do it? What do you guys suggest? Can't redo server. I guess it's also fair to say I get the following errors in Event Viewer "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2" "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\" I only have 1 VHD attached, not sure what Volume 2 is. Thanks!

  Read the article

• Java application crashes my computer. How do I troubleshoot?

  - by Oded

  I am using NetBeans 4.1 for my university course (this is an older version, but is the required version for the course - I can't use a newer version). Whenever I use it for longer than several minutes, my computer crashes - it either reboots or I need to reset it. I have tried running with all startup items disabled (to rule out other applications interfering with the app), but it did no good. I have used Sysinternals procmon logging and the logs are corrupt - the only way I was able to get a good log was by enabling boot logging. However these are huge and I don't know what to look for. I am using Windows XP SP3, fully patched up and this is the only application that I have any kind of problem with. Can anyone suggest troubleshooting steps that will help me pinpoint the cause of these crashes and fix them?

  Read the article

• Startup script on Ubuntu 12.04 not getting executed. Dependencies / load order.

  - by user861181

  I want to create a simple startup script on Ubuntu 12.04: myscript.sh #!/bin/sh sudo /etc/init.d/nginx start cd ~/app/current god -c config/resque.god sudo /etc/init.d/redis-server start echo "SCRIPT RUN" I have it at /etc/init.d/myscript.sh When I do sudo chkconfig --level 2345 myscript.sh I get myscript.sh 2345 When I do sudo chkconfig --add myscript.sh I get insserv: warning: script 'K01myscript.sh' missing LSB tags and overrides insserv: warning: script 'myscript.sh' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'dbus' missing LSB tags and overrides .... myscript.sh 0:off 1:off 2:on 3:on 4:on 5:on 6:off ** EDIT:: I checked the boot.log and it turns out that the script is run, but the problem is that god is not loaded yet when the script is executed. Apparently I want to load this script as the very last thing at startup (or somehow check if god is loaded and then start the script).

  Read the article

• How to use a custom Windows 7 system drive letter?

  - by Ivan

  The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• How do I diagnose a HP Notebook which has hardware issues?

  - by Rob

  My HP DV6t-2300 recently crashed while using FLV Player. It wouldn't start up after this so I had to do a hardware reset (remove power sources, hold down power button ~15 seconds, put back power sources). After this it would turn on, but start up would freeze in Ubuntu, Windows 7, Ubuntu Recovery Mode, and various Linux Live CDs. The only successful way to boot was in Windows 7 Safe Mode. The HP Customer Service was very polite, but they are trying to blame it on a corrupt operating system which is clearly not the case (since I have tried 4 operating systems and none work). I am thinking it might be the GPU since 1) I was watching movies when it crashed and 2) Windows Safe Mode might not use the dedicated GPU. I already ran Memory and HDD tests and there were no detected errors. Any ideas of what's wrong, or suggestions for tests that I should run in safe mode? Should I try reinstalling Windows 7 to convince HP that it's not the OS?

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >