Search Results

Search found 19200 results on 768 pages for 'xp mode'.

Page 262/768 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • Reinstallation version Windows 7?

    - by DWBrayton
    I ordered a Windows 7 Home Premium 32bit os online and just received a DVD & Key Code sticker. The DVD label shows it to be a reinstallation DVD, Windows 7 Home Premium 32-bit Dell branded and states that the DVD is only to be used to reinstall the OS on a Dell PC. I built this PC & it previously has had XP Pro installed for the last several years. A couple of weeks ago I had a problem with some Malware & made the mistake of attempting to reinstall the XP Pro only to find out that MS has locked out my key, the same one I have been using on this built PC for the last 3 years. The previous PC was built by a local PC builder & I just reinstalled the OS on the new system. Should I send this Win7 DVD back to where I bought it, or can I use it? What a mess, Thanks DWB

    Read the article

  • HowTo access Samba Share over VPN Tunnel?

    - by Jeff
    I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

    Read the article

  • External Hardrive Not Reconized on Windows 7 at all

    - by Bella
    I Have a NextStar 2/5" from Vantec and its an 80G HD. I have used it many times on windows xp and it works fine. We just recently upgraded to windows 7 home premium and when I plug it in it beeps many times. I've tried all the USB plugs in my computer and its not those plugs. Haven't tried eSata because it uses a weird cable to plug into. People told me that when it beeps everything is corrupted, but works fine on xp. I tried installing the drivers online from their website and when I try it asks me to put in a cd which makes no sense because they are online drivers. When I go into device manager nothing comes up, it just acts like the HD is invisible. The beeping will stop eventually as it is plugged in, but with no result.

    Read the article

  • VMWare Headphone Issue

    - by Ash_Geek_Pickney
    I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

    Read the article

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

  • PHP-FPM Pool, Child Processes and Memory Consumption

    - by Jhilke Dai
    In my PHP-FPM configuration I have 3 Pools, the eg: Config is: ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 1 ; ;;;;;;;;;;;;;;;;;;;;;;; [www1] user = www group = www listen = /tmp/php-fpm1.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 2 ; ;;;;;;;;;;;;;;;;;;;;;;; [www2] user = www group = www listen = /tmp/php-fpm2.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 3 ; ;;;;;;;;;;;;;;;;;;;;;;; [www3] user = www group = www listen = /tmp/php-fpm3.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 I calculated the pm.max_children processes according to some example calculations on the web like 40 x 40 Mb = 1600 Mb. I have separated 4 GB of RAM for PHP, now according to the calculations 40 Child Processes via one socket, and I have total of 3 sockets in my Nginx and FPM configuration. My doubt is about the amount of memory consumption by those child processes. I tried to create high load in the server via httperf hog and siege but I could not calculate the accurate memory usage by all the PHP processes (other processes like MySQL and Nginx were also running). And all the sockets were in use, So, I seek guidance from anyone who have done this before or know how exactly the pm.max_children in PHP Works. Since I have 3 Pools/sockets with 40 child processes does that count to 3 x 40 x 40 Mb of Memory usage ? or it is just like 40 Max. Child processes sharing 3 sockets (and the total memory usage is just 40 x 40 Mb) ?

    Read the article

  • What decent audio recording interfaces are well supported in Windows 7 64bit?

    - by labradort
    I currently have an Audigy 2 ZS Platinum. It permits me to insert a 1/4" jack line from bass guitar and play along with pre-recorded piano music. This worked fine under Windows XP. I am moving to Windows 7 64 bit (dual boot for now), and Creative may not develop fully working drivers for this component. Looking around, I don't see Windows 7 support mentioned at product web sites from E-MU, Roland, M-Audio, etc. Even at Creative, the posting of available drivers for Windows 7 is deceptive, as they do not adequately support recording (latency, distortion). My local music store shrugs and says to stay with Win XP. In some cases, the Vista drivers will work in Win 7. So I need real world feedback on this. I should also mention I'm not impressed with available USB interfaces - they have too low of a signal to noise ratio for my purposes. That leaves PCI, or possibly firewire devices (never tried one yet).

    Read the article

  • Windows shuts down unexpectedly when waking up from sleep

    - by Kush
    I've been facing this issue since yesterday, whenever I put the computer into sleep mode and when I wake up, it takes me to boot menu with choices; start Windows normally, safe mode, etc. in short, it shuts down unexpectedly while waking up. I have my laptop dual booted with up-to-date Windows 7 SP1 (32-bit) and Ubuntu 10.10. This problem is not happening with Ubuntu. I googled the issue and went through this, this and this page. But, none of the threads were helpful to solve it. I've found that there's something to do with device drivers. What can be done to resolve the issue? Can SFC utility solve it if it is due to corrupt system files?

    Read the article

  • How to use robocopy to move Users folder from partition c to d on Windows 7?

    - by Bastian
    I just tried to copy my Users folder from partition C to partition D using the method mentioned in this post. Unfortunately I encountered two problems: When using the command robocopy c:\Users d:\Users /mir /xj /copyall, robocopy says that it can't find the file C:\Users\, although it exists. When using the command robocopy x:\Users d:\Users /mir /xj /copyall, robocopy says that it cannot find the path d:\Users\Administrator\Application Data, error code <0x00000003>. I started the command line mode of my Windows 7 installation disk (repair mode). Does anybody know what the reasons for these errors might be?

    Read the article

  • Windows Server 2003 Standby/Sleep Results in Cold Boot when Resuming

    - by Simon Chadwick
    I'm running Windows Server 2003 sp2 on a Dell Inspiron e1705. There has never been a problem going to standby/sleep mode (by closing the laptop lid, or from the Start menu), and then resuming later. Today I did a Windows Update to install the latest patches and fixes. I don't know if there is a correlation, but now when I resume from standby/sleep mode, the machine does a cold boot. The AC adapter is connected. The battery is 2 months old, and all its LEDs light up when pressing its test button. The Power Management shows it at "99% (charging)" all the time. There is nothing suspicious in any of the event logs. Any ideas?

    Read the article

  • What does the "Maximum Frequency" number mean in the Windows Resource Monitor?

    - by nhinkle
    In the Windows Resource Monitor's CPU tab, there is a status box and graph for the "Maximum Frequency", right next to the "CPU Usage" values. What does this mean? The value is sometimes over 100% on my system... what could that imply? By looking at CPU-z's real-time report of the processor's clock speed, it seems to be loosely related to what frequency the CPU is running at, which would imply that it means "percent of maximum possible frequency the CPU is running at"; this would be of relevance on systems with SpeedStep and/or TurboBoost technology (or similar). Furthermore, setting the system to "power saving mode" lowers the "maximum frequency" value to around 60%, while setting it to "high performance" mode sets it to around 110%. However, the percentage does not seem to exactly correlate to the CPU speed being shown. What value is this actually representing then?

    Read the article

  • How to power off a hard drive to essentially "hot swap"

    - by Brandon
    I'm looking for either freeware or the programming basics to power off/on a hard drive. Mounting and unmounting a hard drive is simple enough just using the command prompt in Windows XP. Now I need to be able to power down the hard drive so it will not become damaged when being unplugged. I would prefer this to be a simple doable in the command prompt, a simple script, or at worst C++/C#. Freeware that does this exact requirement would also do the job. This script/program will run on Windows XP with .NET 2.0 SP1.

    Read the article

  • Recover from a recover partition when F11 doesn't work and windows is corrupt

    - by jherlitz
    I have someones presario V3000 laptop. It has a D drive which is the recovery partition. The user brought it to me and windows would no longer even boot up. I could only reload XP and try to find a way to recover from the recovery partition. However haven't been able to. I read, hold F11 down when booting up, but that didn't do anything, and the other item I read is to create the CDs from the software installed in the OS from the factory. Well that is the OS that went corrupt and is no longer there. A new reloaded version of XP is there now. Is there still a way I can either create recover CD's/DVD's or boot from the recovery partition?

    Read the article

  • how to connect virtual box os and local machine

    - by Nrew
    This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

    Read the article

  • Corrupted .WAR file after transfer from 32-64 bit Windows Server to Desktop or vice versa

    - by Albert Widjaja
    Hi All, Does anyone experience this problem of corrupted .WAR file after it has been copied over the network share ? this is .WAR file (Web Archive) the J2EE application file (.WAR file is compressed with the same zip algorithm i think ?) Scenario 1: Windows Server 2008 x64 transfer into Windows XP using RDP client (Local Devices and Resources) Scenario 2: Windows XP 32 bit transfer into Windows Server 2003 x64 using shared network drive (port 445 SMB ?) for both of the scenario it always failed / corrupted (the source code seems to be duplicated at the end of line when you open up in the Eclipse / Java IDE). but when in both scenario i compressed the file into .ZIP file everything is OK. can anyone explains why this problem happens ? Thanks, Albert

    Read the article

  • vsftpd not allowing uploads. 550 response.

    - by Josh
    I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

    Read the article

  • moving from Exchange 2003 to Exchange 2010

    - by pcampbell
    Consider a small-medium business' deployment of Exchange 2003. The question is around migrating to Exchange 2010. Here's a bit about the landscape: Current state is 50-100 users/mailboxes with the majority using Outlook 2007 OWA enabled desktop users are NOT running in Cached Exchange Mode laptops users ARE running in Cached Exchange Mode a single Exchange server with modest or reasonable specs for the day (3gz, multi-core, 4gb, Win 2003 32-bit) Questions Do you have any suggestions for the admin team regarding the upgrade path/steps from Exchange 2003 to 2010? Considering the requirement of a 64 bit OS, consider a new separate machine as ready to go with Win 2008. Have I missed any details? Where might virtualization help in this project? Any lessons learned in previous upgrades (2007 or 2010) would be appreciated!

    Read the article

  • virtual box cannot detect webcam in ubuntu

    - by user23950
    I have installed virtual box for ubuntu 9.10. I installed a windows xp inside it. And I don't know why it does not make the webcam available for the yahoo messenger installed in xp. When I click on the device in the interface of virtual box. I can see the webcam but it is grayed out. And I don't know why. It is also not available when I use wine to execute yahoo messenger. And I know that it is working because I can see its working when I use skype for ubuntu. Any suggestions?Its an acer aspire laptop, the webcam is built in.

    Read the article

  • IE8 Compatibility View issues

    - by 08Hawkeye
    I have the IE7 emulater tag in a jsp layout. But when I bring up the page, it defaults to the IE8 view until the user clicks the Compatibility View button. I don't want the user to have to click the button to launch compatibility mode. Is there a way to force IE7 Emulation on pageLoad? I'd even like to disable the button (or any potential to toggle between IE8 standard mode/IE7 view). Thanks! //sw Update: Now the button seems to have disappeared entirely, but still defaults to IE8 standards. Where did it go?! The toolbar context menu has it as selected, but the tools dropdown menu has it grayed out. For my purposes, it is unacceptable for the user to have to use the developer tools or even click the button to trigger emulation, but I don't know why the button disappeared anyway...

    Read the article

  • Bridging Network Devices with Multiple IPs

    - by Andy
    I have a small server with a single NIC that I am trying to get a bridge functioning on so that I can run KVM. On this NIC I have a couple IPs statically assigned to it: eth0 = 192.168.1.1 eth0:1 = 192.168.1.2 eth0:2 = 192.168.1.3 eth0:3 -> Assign the bridge to this I am attempting to set up a bridge using the following instructions: sudo brctl addbr br0 sudo brctl addif br0 eth0:3 sudo ifconfig br0 192.168.1.120 netmask 255.255.255.0 up sudo route add -net 192.168.1.0 netmask 255.255.255.0 br0 sudo route add default gw 192.168.1.1 br0 sudo tunctl -b -u root -t tap0 > /dev/null sudo ifconfig tap0 up sudo brctl addif br0 tap0 However, when I do the second command: sudo brctl addif br0 eth0:3 It puts the ENTIRE eth0 device into promiscuous mode. This knocks the server offline and inaccessible by anything other than locally. Is there a way to bridge JUST eth0:3 to br0 and not put the entire device into promiscuous mode?

    Read the article

  • Data Recovery needed with a Sector Zero problem on a HDD

    - by Jay Robins
    Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

    Read the article

  • Cabling: What to keep in stock?

    - by pehrs
    I have worked a few different places, each one with a different solution, so I would like to hear your suggestions and ideas. I am looking at a situation with multiple server-rooms. We have a mixture of copper (both ethernet and telephone), multi-mode fibre and single-mode fibre. We have all types of connectors: RJ-11, RJ-45, LC, SC, FC, SMA and several I probably forgot about. We have a lot of people working in the area, and keeping track of cables is turning into a full time job. So, here are a the questions: What types and lengths of cable do you keep in stock on site? Do you make your own or buy pre-made? Adapters? Dampeners? How do you manage cable inventory? How do you label the cables? Any other tricks to stop this from driving me crazy?

    Read the article

  • Cloning hard drive -- data, operating system settings, everything

    - by Salman A
    I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

    Read the article

  • Recommended boot partition size for Windows 7

    - by dwj
    I started using One Big Partition for everything and separating data out with folders when I got my current computer years ago. I'm preparing to upgrade my system from Windows XP to Windows 7 and I thought I might go back to putting my data on a separate partition. Most likely I'll just use the default OS install. My current Program Files tree has ~16 GB of stuff. Thinking ahead though, I've had XP installed for years. Who knows what apps I'm going to install down the line? This, of course, begs the question: How big do I make my Windows 7 install partition?

    Read the article

  • Chromium always starts as floating in awesome.wm

    - by xhochy
    I'm using awesome as window manager for a small surf&info terminal. Chromium is started directly after login on the first workspace and should be displayed fullscreen. I've set the layout of all workspaces to awful.layout.suit.max and followed Awesome FAQ so that Chromium and all other (automatically) started programs will be shown on the right workspace. All programs except Chromium will start correctly in fullscreen mode. I tried { rule = { class = "chromium-browser" }, properties = {floating = false, tag = tags[1][1]}} and { rule = { class = "chromium-browser" }, properties = {tag = tags[1][1]}} but Chromium will always start in floating mode. This is a bit annoying as you still see awesome's panel at the top.

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >