Search Results

Search found 12909 results on 517 pages for 'domain'.

Page 264/517 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271 | Next Page >

Why i disconnect every few seconds? using USB wireless adapter

- by Rev3rse

i know it's for ubuntu questions..but mint and ubuntu are very similiar and i had the same problem with linux ubuntu too..so i think this is the right place for my question anyway i don't have experience with drivers and other things,after installing Linux on my machine( i did dist-upgrade btw) everything seem to be great because i didn't have to install any driver, after a while i realized that my connection stop after few minutes(actually it shows that I'm connected but it's not) so i have to reconnect and after few minutes it disconnect again. I'm using Alfa USB wireless adapter AWS036H, and my Linux version is 11 i think the driver i'm using is Realtek i searched in the Internet and i found nothing. these are some outputs of few things people usually ask for: Note: I'm NOT using a laptop. dmsg: [19445.604448] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.174.220.77 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=104 ID=10466 DF PROTO=TCP SPT=55150 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19448.164050] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=41982 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=7566 DF PROTO=TCP INCOMPLETE [8 bytes] ] [19465.079565] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=80.128.216.31 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=5100 DF PROTO=TCP SPT=50169 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19486.270328] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=90.130.13.122 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=22207 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19497.480522] wlan0: deauthenticating from 00:24:c8:4b:46:e0 by local choice (reason=3) [19497.593276] cfg80211: All devices are disconnected, going to restore regulatory settings [19497.593282] cfg80211: Restoring regulatory settings [19497.593346] cfg80211: Calling CRDA to update world regulatory domain [19497.638740] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [19497.638745] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638749] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [19497.638753] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638756] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [19497.638760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638763] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [19497.638766] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638770] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [19497.638773] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638776] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [19497.638780] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [19497.638787] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638790] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [19497.638794] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638797] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [19497.638801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638804] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [19497.638807] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638811] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [19497.638814] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638817] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [19497.638821] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638824] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [19497.638828] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638831] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [19497.638835] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638838] cfg80211: World regulatory domain updated: [19497.638841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [19497.638845] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19497.638848] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [19497.638852] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [19497.638855] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19497.638859] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19513.145150] wlan0: authenticate with 00:24:c8:4b:46:e0 (try 1) [19513.146910] wlan0: authenticated [19513.252775] wlan0: associate with 00:24:c8:4b:46:e0 (try 1) [19513.255149] wlan0: RX AssocResp from 00:24:c8:4b:46:e0 (capab=0x411 status=0 aid=2) [19513.255154] wlan0: associated [19515.675091] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.79.8.40 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x20 TTL=110 ID=42720 DF PROTO=TCP SPT=1945 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19525.684312] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=49890 DF PROTO=TCP SPT=53401 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19551.856766] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=85.228.39.93 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=103 ID=1162 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19564.623005] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=90.202.21.238 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=17881 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19584.855364] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.49.151.87 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=31716 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19604.688647] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.225.124.155 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=6656 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19626.362529] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.184.50.41 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=23241 DF PROTO=TCP SPT=1416 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19645.040906] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=92.250.245.244 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=51 ID=0 DF PROTO=TCP SPT=50061 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19665.212659] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.183.3.18 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=1689 DF PROTO=TCP SPT=62817 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19685.036415] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=50638 DF PROTO=TCP SPT=49624 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19705.487915] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=217.122.17.82 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=112 ID=19070 DF PROTO=TCP SPT=54795 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19726.779185] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=80.88.116.239 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=32168 DF PROTO=TCP SPT=57330 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19744.755673] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.124.5.43 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=2288 DF PROTO=TCP SPT=6475 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19764.449183] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.216.35.19 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=4281 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19784.456189] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.82.25.149 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=114 ID=1866 DF PROTO=TCP SPT=59507 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19804.836687] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.56.199.3 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=14749 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19824.812685] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=186.28.7.159 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=44686 PROTO=UDP SPT=23418 DPT=6881 LEN=28 [19847.683314] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=63046 DF PROTO=TCP SPT=52192 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19884.711455] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.146.24.238 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=27914 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19884.983589] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.107.130.61 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=7742 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19905.681078] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=95.21.11.121 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=31775 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19926.035707] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.76.132.55 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=28140 DF PROTO=TCP SPT=51905 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19945.668326] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=188.92.0.197 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=7865 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19967.200339] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=83.252.102.172 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=105 ID=28408 DF PROTO=TCP SPT=63505 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19999.752732] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.166.171.200 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=36405 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20007.928719] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.235.59.16 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=46415 DF PROTO=TCP SPT=4537 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [20026.181726] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.182.169.36 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=106 ID=25126 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20048.845358] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.66.118.104 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=18068 DF PROTO=TCP SPT=49928 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20064.341857] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=77.2.63.153 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=7242 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20090.093490] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=93.16.17.210 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=894 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20104.443995] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=89.83.235.99 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=114 ID=17295 DF PROTO=TCP SPT=58979 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20128.625374] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.62.91.79 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=21793 DF PROTO=TCP SPT=51446 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20151.055506] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.135.217.213 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=32452 DF PROTO=TCP SPT=55136 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20164.618874] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.79.8.40 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x20 TTL=110 ID=47784 DF PROTO=TCP SPT=2422 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20184.337745] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=83.252.212.71 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=14544 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20205.007512] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.62.158.247 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=21562 DF PROTO=TCP SPT=3933 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20225.204018] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.146.24.238 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=113 ID=15045 DF PROTO=TCP SPT=49630 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20244.842290] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=82.82.190.168 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=23741 DF PROTO=TCP SPT=50766 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20266.701649] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=88.153.108.124 DST=192.168.1.6 LEN=48 TOS=0x02 PREC=0x00 TTL=111 ID=206 DF PROTO=TCP SPT=2451 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20286.305414] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.240.86.73 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=107 ID=325 DF PROTO=TCP SPT=65184 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20294.293989] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43133 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56899 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20294.297015] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43134 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.40 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=12080 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20294.297242] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43135 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=25195 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20295.478338] wlan0: deauthenticating from 00:24:c8:4b:46:e0 by local choice (reason=3) [20295.552735] cfg80211: All devices are disconnected, going to restore regulatory settings [20295.552742] cfg80211: Restoring regulatory settings [20295.552748] cfg80211: Calling CRDA to update world regulatory domain [20295.680635] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [20295.680641] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680644] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [20295.680648] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680652] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [20295.680655] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680658] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [20295.680662] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680665] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [20295.680669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680672] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [20295.680676] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680679] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [20295.680683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680687] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [20295.680690] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680693] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [20295.680697] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680700] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [20295.680704] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680708] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [20295.680711] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680715] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [20295.680718] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680722] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [20295.680725] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680728] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [20295.680732] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680736] cfg80211: World regulatory domain updated: [20295.680738] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [20295.680742] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20295.680745] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20295.680749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20295.680752] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20295.680756] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20306.009341] wlan0: authenticate with 00:24:c8:4b:46:e0 (try 1) [20306.011225] wlan0: authenticated [20306.118095] wlan0: associate with 00:24:c8:4b:46:e0 (try 1) [20306.120963] wlan0: RX AssocResp from 00:24:c8:4b:46:e0 (capab=0x411 status=0 aid=2) [20306.120967] wlan0: associated [20307.364427] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.91.101.130 DST=192.168.1.6 LEN=64 TOS=0x00 PREC=0x00 TTL=49 ID=36839 DF PROTO=TCP SPT=62492 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20310.914290] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43180 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56900 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20310.936634] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43181 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.40 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=12081 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20310.939017] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43182 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=25196 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20325.941050] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=217.118.78.99 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=4407 PROTO=UDP SPT=2970 DPT=6881 LEN=28 [20328.801724] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43196 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56901 DF PROTO=TCP INCOMPLETE [8 bytes] ] ... inxi -N Network: Card-1 Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver r8169 Card-2 Realtek RTL-8139/8139C/8139C+ driver 8139too /usr/lib/linuxmint/mintWifi/mintWifi.py ------------------------- * I. scanning WIFI PCI devices... ------------------------- * II. querying ndiswrapper... ------------------------- * III. querying iwconfig... lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"Home" Mode:Managed Frequency:2.437 GHz Access Point: 00:24:C8:4B:46:E0 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:1132 Missed beacon:0 ------------------------- * IV. querying ifconfig... eth0 Link encap:Ethernet HWaddr 00:1f:d0:c9:b8:8e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x4000 eth1 Link encap:Ethernet HWaddr 00:0e:2e:77:88:16 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0xd000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10696 errors:0 dropped:0 overruns:0 frame:0 TX packets:10696 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3823011 (3.8 MB) TX bytes:3823011 (3.8 MB) wlan0 Link encap:Ethernet HWaddr 00:c0:ca:44:62:d1 inet addr:192.168.1.6 Bcast:255.255.255.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe44:62d1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:90424 errors:0 dropped:0 overruns:0 frame:0 TX packets:65201 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:98024465 (98.0 MB) TX bytes:10345450 (10.3 MB) ------------------------- * V. querying DHCP... lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) lsmod Module Size Used by ipt_REJECT 12512 1 ipt_LOG 12784 5 xt_limit 12541 7 xt_tcpudp 12531 8 ipt_addrtype 12535 4 xt_state 12514 7 ip6table_filter 12711 1 ip6_tables 22545 1 ip6table_filter nf_nat_irc 12542 0 nf_conntrack_irc 13138 1 nf_nat_irc nf_nat_ftp 12548 0 nf_nat 24827 2 nf_nat_irc,nf_nat_ftp nf_conntrack_ipv4 19024 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13106 1 nf_nat_ftp nf_conntrack 69744 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18125 1 iptable_filter x_tables 21907 10 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables nls_utf8 12493 10 udf 83795 1 crc_itu_t 12627 1 udf usb_storage 43946 1 uas 17676 0 snd_seq_dummy 12686 0 cryptd 19801 0 aes_i586 16956 1 aes_generic 38023 1 aes_i586 binfmt_misc 13213 1 dm_crypt 22463 0 vesafb 13449 1 nvidia 9766978 44 arc4 12473 2 rtl8187 56206 0 mac80211 257001 1 rtl8187 cfg80211 156212 2 rtl8187,mac80211 ppdev 12849 0 snd_hda_codec_realtek 255882 1 parport_pc 32111 1 psmouse 73312 0 eeprom_93cx6 12653 1 rtl8187 snd_hda_intel 24113 5 snd_hda_codec 90901 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 3 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq joydev 17322 0 snd 55295 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 soundcore 12600 1 snd snd_page_alloc 14073 2 snd_hda_intel,snd_pcm lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid dm_raid45 88410 0 xor 21860 1 dm_raid45 btrfs 527388 0 zlib_deflate 26594 1 btrfs libcrc32c 12543 1 btrfs 8139too 23208 0 8139cp 22497 0 r8169 42534 0 floppy 60032 0

Read the article
Example WLST Script to Obtain JDBC and JTA MBean Values

- by Daniel Mortimer

Introduction Following on from the blog entry "Get an Offline or Online WebLogic Domain Summary Using WLST!", I have had a request to create a smaller example which only collects a selection of JDBC (System Resource) and JTA configuration and runtime MBeans values. So, here it is. Download Sample Script You can grab the sample script by clicking here. Instructions to Run: 1. After download, extract the zip to the machine hosting the WebLogic environment. You should have three directories along with a readme.txt output Sample_Output scripts 2. In the scripts directory, find the start wrapper script startWLSTJDBCSummarizer.sh (Unix) or startWLSTJDBCSummarizer.cmd (MS Windows). Open the appropriate file in an editor and change the environment variable settings to suit your system. Example - startWLSTDomainSummarizer.cmd set WL_HOME=D:\product\FMW11g\wlserver_10.3 set DOMAIN_HOME=D:\product\FMW11g\user_projects\domains\MyDomain set WLST_OUTPUT_PATH=D:\WLSTDomainSummarizer\output\ set WLST_OUTPUT_FILE=WLST_JDBC_Summary_Via_MBeans.html call "%WL_HOME%\common\bin\wlst.cmd" WLS_JDBC_Summary_Online.py Note: The WLST_OUTPUT_PATH directory value must have a trailing slash. If there is no trailing slash, the script will error and not continue. 3. Run the shell / command line wrapper script. It should launch WLST and kick off "WLS_JDBC_Summary_Online.py". This will hit you with some prompts e.g. Is your domain Admin Server up and running and do you have the connection details? (Y /N ): Y Enter connection URL to Admin Server e.g t3://mymachine.acme.com:7001 : t3://localhost:7001 Enter weblogic username: weblogic Enter weblogic username password (function prompt 1): welcome1 (Note: the value typed in for password will not be echoed back to the console). 4. If the scripts run successfully, you should get a HTML summary in the specified output directory. See example screenshots below: Screenshot 1 - JDBC System Resource Tab Page Screenshot 2 - JTA Tab Page 5. For the HTML to render correctly, ensure the .js and .css files provided (review the output directory created by the zip file extraction) are accessible. For example, to view the HTML locally (without using a web server), place the HTML output, jquery-ui.js, spry.js and wlstsummarizer.css in the same directory. Disclaimer This is a sample script. I have tested it against WebLogic Server 10.3.6 domains on MS Windows and Unix. I cannot guarantee that the script will run error free or produce the expected output on your system. If you have any feedback add a comment to the blog. I will endeavour to fix any problems with my WLST code. Credits JQuery: http://jquery.com/ Spry (Adobe) : https://github.com/adobe/Spryhttp://www.red-team-design.com/cool-headings-with-pseudo-elements

Read the article
URL Parts available to URL Rewrite Rules

- by The Official Microsoft IIS Site

URL Rewrite is a powerful URL rewriting tool available for IIS7 and newer. Your rewriting options are almost unlimited, giving you the ability to optimize URLs for search engine optimization (SEO), support multiple domain names on a single site Read More......( read more ) Read More......(read more)

Read the article
Send email from postfix server to outside email client

- by Russ

I have set up an email server and can send/receive email localhost and I can receive mail from outside sources but I cannot send emails to outside sources. I get this error when I try to send to an outside source such as live.com or gmail.com: Nov 8 22:15:13 server2 postfix/smtp[7598]: 699D480A64: to=, relay=none, delay=122043, delays=122022/0.01/20/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=live.com type=MX: Host not found, try again) Any ideas where I could look to resolve this?

Read the article
No mapping between account names and security IDs was done

- by ybbest

When I try to install SQL Server 2008 R2, I got the error “No mapping between account names and security IDs was done” when I try to set the SQL Server Database engine services identity to a domain user name. The reason I am getting the error is that I create a base VM forgot to run sysprep, before I copy the VM and used to install SQL servers. You need to run the sysprep as follows: References: How to Sysprep in Windows Server 2008 R2 and Windows 7

Read the article
NoSQL with RavenDB and ASP.NET MVC - Part 2

- by shiju

In my previous post, we have discussed on how to work with RavenDB document database in an ASP.NET MVC application. We have setup RavenDB for our ASP.NET MVC application and did basic CRUD operations against a simple domain entity. In this post, let’s discuss on domain entity with deep object graph and how to query against RavenDB documents using Indexes.Let's create two domain entities for our demo ASP.NET MVC appplication public class Category { public string Id { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public List<Expense> Expenses { get; set; } public Category() { Expenses = new List<Expense>(); } } public class Expense { public string Id { get; set; } public Category Category { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category.Let's create ASP.NET MVC view model for Expense transaction public class ExpenseViewModel { public string Id { get; set; } public string CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } Let's create a contract type for Expense Repository public interface IExpenseRepository { Expense Load(string id); IEnumerable<Expense> GetExpenseTransactions(DateTime startDate,DateTime endDate); void Save(Expense expense,string categoryId); void Delete(string id); } Let's create a concrete type for Expense Repository for handling CRUD operations. public class ExpenseRepository : IExpenseRepository { private IDocumentSession session; public ExpenseRepository() { session = MvcApplication.CurrentSession; } public Expense Load(string id) { return session.Load<Expense>(id); } public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) { //Querying using the Index name "ExpenseTransactions" //filtering with dates var expenses = session.LuceneQuery<Expense>("ExpenseTransactions") .WaitForNonStaleResults() .Where(exp => exp.Date >= startDate && exp.Date <= endDate) .ToArray(); return expenses; } public void Save(Expense expense,string categoryId) { var category = session.Load<Category>(categoryId); if (string.IsNullOrEmpty(expense.Id)) { //new expense transaction expense.Category = category; session.Store(expense); } else { //modifying an existing expense transaction var expenseToEdit = Load(expense.Id); //Copy values to expenseToEdit ModelCopier.CopyModel(expense, expenseToEdit); //set category object expenseToEdit.Category = category; } //save changes session.SaveChanges(); } public void Delete(string id) { var expense = Load(id); session.Delete<Expense>(expense); session.SaveChanges(); } } Insert/Update Expense Transaction The Save method is used for both insert a new expense record and modifying an existing expense transaction. For a new expense transaction, we store the expense object with associated category into document session object and load the existing expense object and assign values to it for editing a existing record. public void Save(Expense expense,string categoryId) { var category = session.Load<Category>(categoryId); if (string.IsNullOrEmpty(expense.Id)) { //new expense transaction expense.Category = category; session.Store(expense); } else { //modifying an existing expense transaction var expenseToEdit = Load(expense.Id); //Copy values to expenseToEdit ModelCopier.CopyModel(expense, expenseToEdit); //set category object expenseToEdit.Category = category; } //save changes session.SaveChanges(); } Querying Expense transactions public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) { //Querying using the Index name "ExpenseTransactions" //filtering with dates var expenses = session.LuceneQuery<Expense>("ExpenseTransactions") .WaitForNonStaleResults() .Where(exp => exp.Date >= startDate && exp.Date <= endDate) .ToArray(); return expenses; } The GetExpenseTransactions method returns expense transactions using a LINQ query expression with a Date comparison filter. The Lucene Query is using a index named "ExpenseTransactions" for getting the result set. In RavenDB, Indexes are LINQ queries stored in the RavenDB server and would be executed on the background and will perform query against the JSON documents. Indexes will be working with a lucene query expression or a set operation. Indexes are composed using a Map and Reduce function. Check out Ayende's blog post on Map/Reduce We can create index using RavenDB web admin tool as well as programmitically using its Client API. The below shows the screen shot of creating index using web admin tool. We can also create Indexes using Raven Cleint API as shown in the following code documentStore.DatabaseCommands.PutIndex("ExpenseTransactions", new IndexDefinition<Expense,Expense>() { Map = Expenses => from exp in Expenses select new { exp.Date } }); In the Map function, we used a Linq expression as shown in the following from exp in docs.Expensesselect new { exp.Date };We have not used a Reduce function for the above index. A Reduce function is useful while performing aggregate functions based on the results from the Map function. Indexes can be use with set operations of RavenDB.SET OperationsUnlike other document databases, RavenDB supports set based operations that lets you to perform updates, deletes and inserts to the bulk_docs endpoint of RavenDB. For doing this, you just pass a query to a Index as shown in the following commandDELETE http://localhost:8080/bulk_docs/ExpenseTransactions?query=Date:20100531The above command using the Index named "ExpenseTransactions" for querying the documents with Date filter and will delete all the documents that match the query criteria. The above command is equivalent of the following queryDELETE FROM ExpensesWHERE Date='2010-05-31' Controller & ActionsWe have created Expense Repository class for performing CRUD operations for the Expense transactions. Let's create a controller class for handling expense transactions. public class ExpenseController : Controller { private ICategoryRepository categoyRepository; private IExpenseRepository expenseRepository; public ExpenseController(ICategoryRepository categoyRepository, IExpenseRepository expenseRepository) { this.categoyRepository = categoyRepository; this.expenseRepository = expenseRepository; } //Get Expense transactions based on dates public ActionResult Index(DateTime? StartDate, DateTime? EndDate) { //If date is not passed, take current month's first and last dte DateTime dtNow; dtNow = DateTime.Today; if (!StartDate.HasValue) { StartDate = new DateTime(dtNow.Year, dtNow.Month, 1); EndDate = StartDate.Value.AddMonths(1).AddDays(-1); } //take last date of startdate's month, if endate is not passed if (StartDate.HasValue && !EndDate.HasValue) { EndDate = (new DateTime(StartDate.Value.Year, StartDate.Value.Month, 1)).AddMonths(1).AddDays(-1); } var expenses = expenseRepository.GetExpenseTransactions(StartDate.Value, EndDate.Value); if (Request.IsAjaxRequest()) { return PartialView("ExpenseList", expenses); } ViewData.Add("StartDate", StartDate.Value.ToShortDateString()); ViewData.Add("EndDate", EndDate.Value.ToShortDateString()); return View(expenses); } // GET: /Expense/Edit public ActionResult Edit(string id) { var expenseModel = new ExpenseViewModel(); var expense = expenseRepository.Load(id); ModelCopier.CopyModel(expense, expenseModel); var categories = categoyRepository.GetCategories(); expenseModel.Category = categories.ToSelectListItems(expense.Category.Id.ToString()); return View("Save", expenseModel); } // // GET: /Expense/Create public ActionResult Create() { var expenseModel = new ExpenseViewModel(); var categories = categoyRepository.GetCategories(); expenseModel.Category = categories.ToSelectListItems("-1"); expenseModel.Date = DateTime.Today; return View("Save", expenseModel); } // // POST: /Expense/Save // Insert/Update Expense Tansaction [HttpPost] public ActionResult Save(ExpenseViewModel expenseViewModel) { try { if (!ModelState.IsValid) { var categories = categoyRepository.GetCategories(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); return View("Save", expenseViewModel); } var expense=new Expense(); ModelCopier.CopyModel(expenseViewModel, expense); expenseRepository.Save(expense, expenseViewModel.CategoryId); return RedirectToAction("Index"); } catch { return View(); } } //Delete a Expense Transaction public ActionResult Delete(string id) { expenseRepository.Delete(id); return RedirectToAction("Index"); } } Download the Source - You can download the source code from http://ravenmvc.codeplex.com

Read the article
Silverlight Cream for April 03, 2010 -- #829

- by Dave Campbell

In this Issue: Scott Marlowe, Nokola, SilverLaw, Brad Abrams, Jeff Wilcox, Jesse Liberty, Alexey Zakharov, ondrejsv, Ward Bell, and David Anson. Shoutouts: Bart Czernicki has a post up about the latest with HTML5: HTML 5 is Born Old - Quake in HTML 5 I was sent a link to shoebox360 a while back and had to sign up to see the Silverlight use, but it does work very nice. I like the panoramic carousel in the viewer: shoebox360 Jeff Handley has a post up on RIA Services - Documentation Guidance and Community Samples... the team is looking for feedback from all of us Shawn Wildermuth posted his My MIX Talks' Source Code Laurent Bugnion posted his Sample code and slides for my TechDays10 (Belgium) talks From SilverlightCream.com: Silverlight to WCF Cross Domain SecurityException Scott Marlowe wrote an article about an often-encountered security exception having to do with cross-domain policies. He details the problem, the response, the solution, and yet another problem/solution associated... good stuff, Scott! Simple Functions for HTML Interop You've seen Nokola's graphic work... how about some HTML Interop from him? He's exposing the code he uses in his work. New Video: ChildWindow Styling - Silverlight 3 SilverLaw has a new video tutorial on Silerlight 3 ChildWindow Styling up - in German - but the video is language-agnostic :) Silverlight 4 + RIA Services - Ready for Business: Exposing WCF (SOAP\WSDL) Services Brad Abrams' continuation in his RIA series is this one demonstrating exposing RIA Services as a Soap\WSDL service Silverlight 4: New parser implementation. New parser features. Jeff Wilcox has a post up highlighting some of the new features in Silverlight 4 such as a new parser implementation with new XAML features. New Video Series – Getting Started With Silverlight Jesse Liberty is starting a new video tutorial series that's going to build out to be a "complete survey of Silverlight programming". The first two are in this post and are Getting Started and Adding Controls to a Silverlight App... looks like good material, Jesse, and all the source is there for the taking as well. Silverlight layout hack: Centered content with fixed maxwidth Alexey Zakharov has a quick tip up on creating centered content with fixed maxwidth. He calls it a dirty trick... looks like code to me :) Silverlight DataForm’s autogenerated fields send empty strings to database ondrejsv points up a problem he had with the Toolkit's DataForm, and his solution to it... with code for all of us following along behind :) DevForce Extensibility With MEF InheritedExport Ward Bell has a post up describing how they got DevForce MEF'd up, and looks like a good post to get you all excited about MEF as well... lots of external links and good info. Tip: Read-only custom DependencyProperties don't exist in Silverlight, but can be closely approximated David Anson's latest Tip is about Read-only custom DependencyProperties in Silverlight -- which strictly is not possible, but he has a code example up that gets close. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article
What's up with LDoms: Part 4 - Virtual Networking Explained

- by Stefan Hinker

I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking. Basic connectivity as we've seen it in the first, simple example, is easy enough. But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now. In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only. Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices. The virtual switch should be seen just like a real ethernet switch. It "runs" in the service domain and moves ethernet packets back and forth. A virtual network device is plumbed in the guest domain. It corresponds to a physical network device in the real world. There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch. In the virtual world, you do the same: You create a virtual network device for your guest and connect it to a virtual switch in a service domain. The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices. Don't be confused, it's rather straight forward, really. Let's start with the simple case, and work our way to some more sophisticated options later on. In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment. In the real world, you'd connect each of these systems to the same ethernet switch. So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2. In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch. We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch. They can now communicate with each other and with any system reachable via nxge2. If primary were running Solaris 10, communication with the guests would not be possible. This is different with Solaris 11, please see the Admin Guide for details. Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one. It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there. However, if we want to do this manually, we can also do that. (One reason might be firewall rules that work on MAC addresses.) So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver. In Solaris 10, they'd appear as "vnet0". Solaris 11 would apply it's usual vanity naming scheme. We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal. In many cases, using Jumbo Frames helps increase throughput performance. By default, these interfaces will run with the standard ethernet MTU of 1500 bytes. To change this, it is usually sufficient to set the desired MTU for the virtual switch. This will automatically set the same MTU for all vnet devices attached to that switch. Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000. Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times. As always, keeping a configuration simple will help avoid errors of all kind. Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable. And as such, this concept needs to be carried over into the virtual world. Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44. There might also be other VLANs on the wire, but the vswitch will ignore all those packets. We also have two vnet devices, one for mars and one for venus. Venus will see traffic from VLANs 33 and 44 only. For VLAN 44, venus will need to configure a tagged interface "vnet44000". For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic. This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33. Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44. On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system. It's the "id=<somenumber>" option available for both vswitches and vnet devices. Normally, Solaris in the guest would enumerate network devices sequentially. However, it has ways of remembering this initial numbering. This is good in the physical world. In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change. Configuration confusion will follow suit. To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far. Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above. I hope this is useful and, as always, I welcome any comments.

Read the article
Mount cifs on Ubuntu 11.10

- by Renan Madeira

I try mount some directories on my Ubuntu 11.10, but i can't it. mount -t cifs ///Renan /media/SM\ -\ Renan/ -o username=renan.madeira,password=,domain= When i open /media/SM\ -\ Renan, i received this message; bash: cd: /media/SM - Renan/: Permission denied I watch permissions on /media and see this; drwxrws--T 6 root 504 0 2011-08-21 21:35 SM - Renan 504 = GID of renan.madeira user on my samba server. Some suggestions?

Read the article
Silverlight Cream for January 03, 2011 -- #1021

- by Dave Campbell

In this all-Submittal Issue: Gill Cleeren(-2-), Brian Noyes, Brian Genisio, René Schulte, and Andy Schwam(-2-). Above the Fold: Silverlight: "The INavigationContentLoader interface in Silverlight 4" Gill Cleeren WP7: "Sending Windows Phone Screenshots in an Email" René Schulte WCF RIA Services: "WCF RIA Services Part 10 - Exposing Domain Services To Other Clients" Brian Noyes Shoutouts: Want to know what it takes to be an MVP? Check out René Schulte's recap of 2010: Goodbye 2010 - Hello 2011 ... awesome, René! Rui Marinho sent me this post... it's WPF, but wow... WPF and Kinect! Kinect & WPF From SilverlightCream.com: The INavigationContentLoader interface in Silverlight 4 Gill Cleeren has a couple posts up... this first is a break-out of the INavigationContentLoader... what all can be done with it, in addition to the flow of the page load process broken out. Working with the RaiseCanExecuteChanged in MVVM Light (Silverlight) Gill Cleeren' latest post is a discussion of the Silverlight ICommand interface and Laurent Bugnion's RaiseCanExecuteChanged in MVVM Light, with example code. WCF RIA Services Part 10 - Exposing Domain Services To Other Clients Brian Noyes has Part 10 in his WCF RIA Services Tutorial series up at SilverlightShow ... with info on, for example, exposint an OData, SOAP, or REST/JSON endpoint, or how to consume them. Cross-Training in Silverlight & Flex–MVVM vs Presentation Model Brian Genisio finished the year off with this post in his on-going Silverlight/Flex seris comparing MVVM vs Presentation Model .. lots of good MVVM/ViewModel tips and code in this post. Sending Windows Phone Screenshots in an Email René Schulte is the perfect guy to be doing this... how about emailing a screenshot directly from inside an app, for instance Laurent's taking a screenshot from inside an app... too cool, Rene! Windows Phone 7 Application Development Tips Andy Schwam has a post up with tips he learned while creating his first WP7 app... lots of good tips, Gestures, Camera, ISO... check it out, could save you some time and tears :) WP7 Tip: Using the CameraCaptureTask for Windows Phone 7 Andy Schwam's most recent post is WP7 dev as well, and has a bunch of tips and code for using the camera, such as capturing an image, resizing, saving... good stuff. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article
A frequently updated mixed bag blog OR several seldom updated niche sites?

- by Melanie

Background I am a member of the website HubPages where I have about a hundred articles (and I'm always writing more.) Anyway, HubPages revenue model is 40% ad-share for them and 60% ad share for users. While the userbase there is really friendly, the site is REALLY slow, buggy and there is a ton of content on HubPages that is copied from other sources. Upon flagging these articles it takes a ton of time for mods to remove it and it's just generally dragging down my stuff. Furthermore, HubPages was hit really hard by Google's Panda Update: http://www.google.com/search?hl=en&rlz=1B3GGLL_enUS426US426&tbm=nws&q=google+panda& Aside from the temporary problems I would deal with when removing content from HubPages and putting it on my own domain (duplicate content, etc) I have another problem. Which would be the best for my articles? I have tons of articles in a wide variety of niches and would like to do what would help them perform the best. I'm not a huge niche writer and have received wide criticism from the HubPages community for my articles not performing as well as they could because I don't use enough keywords within the text of my articles. I prefer to write more naturally in a way that would appeal to an audience instead of keyword stuff. Anyway, this is aside the point. My Question After removing my articles from HubPages, should I put them on one domain or spread them across multiple domains grouped sort of by topic. For example: a-bunch-of-articles.com OR travel-articles.com and financial-articles.com and knitting-articles.com (I know those domains aren't available, but it's just kind of an example.) Here are the pros and cons of each: a mixed bag site like a-bunch-of-articles.com may not perform as well because of its mixed-bag nature a mixed bag site would be updated far more frequently than several niche sites... some niche sites may be updated so infrequently that a year could pass before one sees a new article a mixed bag site would be like putting all my eggs is one basket, where having several niche sites would spread out my portfolio, so to speak. a mixed bag site would be cheaper, $14 (two year registration) to start out with and hosting and I'm good to go. a mixed bag site wouldn't allow me to easily target keywords, but then again isn't HubPages pretty much a mixed bag site?

Read the article
SQL – Migrate Database from SQL Server to NuoDB – A Quick Tutorial

- by Pinal Dave

Data is growing exponentially and every organization with growing data is thinking of next big innovation in the world of Big Data. Big data is a indeed a future for every organization at one point of the time. Just like every other next big thing, big data has its own challenges and issues. The biggest challenge associated with the big data is to find the ideal platform which supports the scalability and growth of the data. If you are a regular reader of this blog, you must be familiar with NuoDB. I have been working with NuoDB for a while and their recent release is the best thus far. NuoDB is an elastically scalable SQL database that can run on local host, datacenter and cloud-based resources. A key feature of the product is that it does not require sharding (read more here). Last week, I was able to install NuoDB in less than 90 seconds and have explored their Explorer and Admin sections. You can read about my experiences in these posts: SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database Many SQL Authority readers have been following me in my journey to evaluate NuoDB. One of the frequently asked questions I’ve received from you is if there is any way to migrate data from SQL Server to NuoDB. The fact is that there is indeed a way to do so and NuoDB provides a fantastic tool which can help users to do it. NuoDB Migrator is a command line utility that supports the migration of Microsoft SQL Server, MySQL, Oracle, and PostgreSQL schemas and data to NuoDB. The migration to NuoDB is a three-step process: NuoDB Migrator generates a schema for a target NuoDB database It loads data into the target NuoDB database It dumps data from the source database Let’s see how we can migrate our data from SQL Server to NuoDB using a simple three-step approach. But before we do that we will create a sample database in MSSQL and later we will migrate the same database to NuoDB: Setup Step 1: Build a sample data CREATE DATABASE [Test]; CREATE TABLE [Department]( [DepartmentID] [smallint] NOT NULL, [Name] VARCHAR(100) NOT NULL, [GroupName] VARCHAR(100) NOT NULL, [ModifiedDate] [datetime] NOT NULL, CONSTRAINT [PK_Department_DepartmentID] PRIMARY KEY CLUSTERED ( [DepartmentID] ASC ) ) ON [PRIMARY]; INSERT INTO Department SELECT * FROM AdventureWorks2012.HumanResources.Department; Note that I am using the SQL Server AdventureWorks database to build this sample table but you can build this sample table any way you prefer. Setup Step 2: Install Java 64 bit Before you can begin the migration process to NuoDB, make sure you have 64-bit Java installed on your computer. This is due to the fact that the NuoDB Migrator tool is built in Java. You can download 64-bit Java for Windows, Mac OSX, or Linux from the following link: http://java.com/en/download/manual.jsp. One more thing to remember is that you make sure that the path in your environment settings is set to your JAVA_HOME directory or else the tool will not work. Here is how you can do it: Go to My Computer >> Right Click >> Select Properties >> Click on Advanced System Settings >> Click on Environment Variables >> Click on New and enter the following values. Variable Name: JAVA_HOME Variable Value: C:\Program Files\Java\jre7 Make sure you enter your Java installation directory in the Variable Value field. Setup Step 3: Install JDBC driver for SQL Server. There are two JDBC drivers available for SQL Server. Select the one you prefer to use by following one of the two links below: Microsoft JDBC Driver jTDS JDBC Driver In this example we will be using jTDS JDBC driver. Once you download the driver, move the driver to your NuoDB installation folder. In my case, I have moved the JAR file of the driver into the C:\Program Files\NuoDB\tools\migrator\jar folder as this is my NuoDB installation directory. Now we are all set to start the three-step migration process from SQL Server to NuoDB: Migration Step 1: NuoDB Schema Generation Here is the command I use to generate a schema of my SQL Server Database in NuoDB. First I go to the folder C:\Program Files\NuoDB\tools\migrator\bin and execute the nuodb-migrator.bat file. Note that my database name is ‘test’. Additionally my username and password is also ‘test’. You can see that my SQL Server database is running on my localhost on port 1433. Additionally, the schema of the table is ‘dbo’. nuodb-migrator schema –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.path=/tmp/schema.sql The above script will generate a schema of all my SQL Server tables and will put it in the folder C:\tmp\schema.sql . You can open the schema.sql file and execute this file directly in your NuoDB instance. You can follow the link here to see how you can execute the SQL script in NuoDB. Please note that if you have not yet created the schema in the NuoDB database, you should create it before executing this step. Step 2: Generate the Dump File of the Data Once you have recreated your schema in NuoDB from SQL Server, the next step is very easy. Here we create a CSV format dump file, which will contain all the data from all the tables from the SQL Server database. The command to do so is very similar to the above command. Be aware that this step may take a bit of time based on your database size. nuodb-migrator dump –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.type=csv –output.path=/tmp/dump.cat Once the above command is successfully executed you can find your CSV file in the C:\tmp\ folder. However, you do not have to do anything manually. The third and final step will take care of completing the migration process. Migration Step 3: Load the Data into NuoDB After building schema and taking a dump of the data, the very next step is essential and crucial. It will take the CSV file and load it into the NuoDB database. nuodb-migrator load –target.url=jdbc:com.nuodb://localhost:48004/mytest –target.schema=dbo –target.username=test –target.password=test –input.path=/tmp/dump.cat Please note that in the above script we are now targeting the NuoDB database, which we have already created with the name of “MyTest”. If the database does not exist, create it manually before executing the above script. I have kept the username and password as “test”, but please make sure that you create a more secure password for your database for security reasons. Voila! You’re Done That’s it. You are done. It took 3 setup and 3 migration steps to migrate your SQL Server database to NuoDB. You can now start exploring the database and build excellent, scale-out applications. In this blog post, I have done my best to come up with simple and easy process, which you can follow to migrate your app from SQL Server to NuoDB. Download NuoDB I strongly encourage you to download NuoDB and go through my 3-step migration tutorial from SQL Server to NuoDB. Additionally here are two very important blog post from NuoDB CTO Seth Proctor. He has written excellent blog posts on the concept of the Administrative Domains. NuoDB has this concept of an Administrative Domain, which is a collection of hosts that can run one or multiple databases. Each database has its own TEs and SMs, but all are managed within the Admin Console for that particular domain. http://www.nuodb.com/techblog/2013/03/11/getting-started-provisioning-a-domain/ http://www.nuodb.com/techblog/2013/03/14/getting-started-running-a-database/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

Read the article
Finding a person in the forest

- by PointsToShare

© 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery. LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup. Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. That’s all folks!

Read the article
10 steps to enable ‘Anonymous Access’ for your SharePoint 2010 site

- by KunaalKapoor

What’s Anonymous Access? Anonymous access to your SharePoint site enables all visitors to view your SharePoint site anonymously without having to log in. With this blog I’d like to go through an easy step wise procedure to enable/set up anonymous access. Before you actually enable anonymous access on the site, you’ll have to change some settings at the web app level. So let’s start with that: Prerequisite(s): 1. A hosted SharePoint 2010 farm/server. 2. An existing SharePoint site. I just thought I’d mention the above pre-reqs, since the steps mentioned below would’nt be valid or a different type of a site. Step 1: In Central Administration, under Application Management, click on the Manage web applications. Step 2: Now select the site you want to enable anonymous access and click on the Authentication Providers icon. Step 3: On the modal window click on the Default zone. Step 4: Now under the Edit Authentication section, check Enable anonymous access and click Save. This is basically to make the Anonymous Access authentication mechanism available at the web app level @ IIS. Now, web application will allow anonymous access to be set. 5. Going back to Web Application Management click on the Anonymous Policy icon. Step 6: Also before we proceed any further, under the Anonymous Access Restrictions (@ web app mgmt.) select your Zone and set the Permissions to None – No policy and click Save. Step 7: Now lets navigate to your top level site collection for the web application. Click the Site Actions > Site Settings. Under Users and Permissions click Site permissions. Step 8: Under Users and Permissions, click on Site Permissions. Step 9: Under the Edit tab, click on Anonymous Access. Step 10: Choose whether you want Anonymous users to have access to the entire Web site or to lists and libraries only, and then click on OK. You should now be able to see the view as below under your permissions Also keep in mind: If you are trying to access the site from a browser within the domain, then you’ll need to change some browser settings to see the after affects. Normally this is because the browsers (Internet Explorer) is set to log in automatically to intranet zone only , not sure if you have explicitly changed the zones and added it to trusted sites. If this is from a box within your domain please try to access the site by temporarily changing the Internet Explorer setting to Anonymous Logon on the zone that the site is added example "Intranet" and try . You will find the same settings by clicking on Tools > Internet Options > Security Tab.

Read the article
prerequisites of learnig hadoop, can php developer learn hadoop without java experience [closed]

- by Rishabh Mathur

i am willing to learn hadoop as a Developer , but i am confused over the prerequisite of learning it.? is having a good experience in java programming very essential to learn hadoop? I have 4 years of experience in application development in LAMP. But i am not in touch with java programming as a part of my regular work.My objective to get into hadoop is to increase my knowledge in bigdata analysis as well as to get an oppurtunity in this domain. Any suggestions?

Read the article
IIS 7 Url Rewrite Rules for SEO and Security

- by The Official Microsoft IIS Site

Before IIS 7, if you wanted to do url rewriting with IIS 6 you had to use a 3rd party program such as ISAPI Rewrite by helicontech.com. This was a good program but it wasn’t native to IIS and there were limitations such as a site hosting more than 1 domain with different applications running. With IIS 7 url rewriting and redirecting has never been easier thanks to Microsoft’s Url Rewrite module. The rewriting is done by rules which are specified in the web.config under <system.webserver>...(read more)

Read the article
Daily tech links for .net and related technologies - Mar 18-21, 2010

- by SanjeevAgarwal

Daily tech links for .net and related technologies - Mar 18-21, 2010 Web Development TDD kata for ASP.NET MVC controllers (part 2) -David Take Control Of Web Control ClientID Values in ASP.NET 4.0 - Scott Mitchell Inside the ASP.NET MVC Controller Factory - Dino Esposito Microsoft, jQuery, and Templating - stephen walther Cross Domain AJAX Request with YQL and jQuery - Jeffrey Way T4MVC Add-In to auto run template -Wayne Web Design Website Content Planning The Right Way - Kristin Wemmer Microsoft...(read more)

Read the article
Getting Started With nServiceBus on VAN Mar 31

- by van

Topic: nServiceBus is mature and powerful open source framework that enables to design robust, scalable, message-based, service-oriented architectures. Latest improvements in the configuration API enables developers to quickly get started and build a working simple system that uses messaging infrastructure. The goal of this session is to give a jump start with the framework, introduce basic concepts such as message handlers, Sagas, Pub/Sub, Generic Host and also create a working demo application that uses publish/subscribe messaging. The content of the session is addressed to developers that are interested in learning how to get started using nServiceBus in order to design and build distributed systems. Bio: Bernard Kowalski is currently a Software Developer at Microdesk, one of Autodesk's leading partners in providing variety of Geospatial and Computer-Aided Design solutions. Bernard has experience developing .NET framework-based applications utilizing Windows Forms, Windows Services, ASP.NET MVC, and Web services. In a recent project, Bernard architected and implemented a distributed system based on SOA principles using an open source implementation of an Enterprise Service Bus. Bernard develops software with Agile patterns and practices using Domain Driven Design combined with TDD (Test Driven Development). He is familiar with all of the following APIs: Autodesk Vault/Product Stream API, AutoCAD ActiveX/VBA/.NET API, AutoCAD Mechanical API, Autodesk Inventor API, Autodesk MapGuide Enterprise. Prior to joining Microdesk, Bernard worked as a researcher and teacher at the University of Science and Technology in Krakow, Poland where he was awarded with a PhD in Computer Methods in Materials Science. He also participated in research projects where he developed applications for analysis of hot compression test results using advanced optimization techniques. He also developed Finite Element Method-based programs for thermal and stress analysis using C++ and FORTRAN. Bernard is a member of the Domain Driven Design and ALT.NET user groups in NYC. Virtual ALT.NET (VAN) is the online gathering place of the ALT.NET community. Through conversations, presentations, pair programming and dojos, we strive to improve, explore, and challenge the way we create software. Using net conferencing technology such as Skype and LiveMeeting, we hold regular meetings, open to anyone, usually taking the form of a presentation or an Open Space Technology-style conversation. Please see the Calendar(http://www.virtualaltnet.com/Home/Calendar) to find a VAN group that meets at a time convenient to you, and feel welcome to join a meeting. Past sessions can be found on the Recording page. To stay informed about VAN activities, you can subscribe to the Virtual ALT.NET Google Group and follow the Virtual ALT.NET blog. Times below are Central Standard Time Start Time: Wed, Mar 31, 2010 8:00 PM UTC/GMT -5 hours End Time: Wed, Mar 31, 2010 10:00 PM UTC/GMT -5 hours Attendee URL: http://www.virtualaltnet.com/van Zach Young http://www.virtualaltnet.com

Read the article
Google CDN - using http vs https

- by HorusKol

All the examples of accessing google's CDN use https:// in the URL (including on Google itself) - but this has caused a problem when testing in Safari (certificate problem and also different domain). <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> I have switched to calling it over http instead, but just wondering if this is a mistake or security issue?

Read the article
Generate a proper 404 page for blocked sites via /etc/hosts instead of redirect to localhost

- by Mixhael

I have blocked some websites by editing /etc/hosts and adding several newline-entries in the following manner: 0.0.0.0 www.domain.com And it works. The only thing is: when a website is visited which is blocked, the browser is redirected to my http://localhost, resulting in a directory listing or website-presentation that is running within my localhost root-environment. It's not a very big problem, but I prefer a standard error that mentions the website cannot be visited (for instance by a 404 page). Is this possible?

Read the article
Network Solutions Gold VIP Program

- by GGBlogger

Today I received an email advising me “Congratulations! You have been selected for the Network Solutions Gold VIP Program” Now I get a bunch of messages from Network Solutions because a long time ago I chose them as my registrar. I usually just save these to my Outlook Network Solutions folder and move on. This time my wife was in the room and I chuckled and said something about “Network Solutions has made me a Gold VIP member.” She said “So what does that mean?” Prompted by that I scrolled down the page to look at my “perks". Let’s see – Special pricing, 1 year free Web Forwarding, 1 hour of free support… etc etc until I hit “Enrollment in SafeRenew* SafeRenew* simplifies your renewal process. It protects your domain name registrations and corresponding services in the event you forget or are unable to renew on time. I’m thinking “Now ain’t that neat” I don’t use auto renew anyway and never have. Then I continued reading: Beginning June 24th, 2012 your domains* (that’s 10 days away) will automatically renew. To ensure continuation of service, please be certain you have a valid credit card on file. If you do not wish for your services to be automatically renewed, please click here to log into account manager and opt out of the SafeRenew™ service. Whoa Network Solutions is going to start spending my money without so much as a by your leave sir!!! I don’t bloody think so and how truly magnanimous of them I can “click here” to opt out of what I didn’t opt in for. Talk about furious! I still am. Now the kicker is: if my wife hadn’t been curious and if I’d had a working credit card on file I wouldn’t have know this until one of my unwanted domain names auto renewed. Of course I was told “Oh – we’d have refunded your money” to which I say bull. In my view Networks Solutions is guilty of a crime of some sort. They DO NOT have a right to spend my money without asking!!!!! So watch out folks.

Read the article
NDC 2010: Eric Evans -What I learned since the book

This was one of the most rewarding sessions for me. Eric Evans explained what he picked up and learned since he wrote the book, what parts that he realized was more important that he initially thought and what parts had been missing. A missing building block: Domain Events [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article
DHCP server with multiple interfaces on ubuntu, destroys default gateway

- by Henrik Alstad

I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

Read the article
Oracle Coherence 3.5 : Create Internet-scale applications using Oracle's high-performance data grid

- by frederic.michiara

Oracle Coherence Coherence provides replicated and distributed (partitioned) data management and caching services on top of a reliable, highly scalable peer-to-peer clustering protocol. Coherence has no single points of failure; it automatically and transparently fails over and redistributes its clustered data management services when a server becomes inoperative or is disconnected from the network. When a new server is added, or when a failed server is restarted, it automatically joins the cluster and Coherence fails back services to it, transparently redistributing the cluster load. Coherence includes network-level fault tolerance features and transparent soft re-start capability to enable servers to self-heal. For the ones looking at an easy reading and first good approach to Oracle Coherence, I would recommend reading the following book : Overview of Oracle Coherence 3.5 Build scalable web sites and Enterprise applications using a market-leading data grid product Design and implement your domain objects to work most effectively with Coherence and apply Domain Driven Designs (DDD) to Coherence applications Leverage Coherence events and continuous queries to provide real-time updates to client applications Successfully integrate various persistence technologies, such as JDBC, Hibernate, or TopLink, with Coherence Filled with numerous examples that provide best practice guidance, and a number of classes you can readily reuse within your own applications This book is targeted to Architects and developers, and as in our team we're more about Solutions Architects than developers I found interest in this book as it help to understand better Oracle Coherence and its value. The only point I may not agree with the authors is that Oracle Coherence is not an alternative to Oracle RAC in providing High Availability, but combining both Oracle RAC and Oracle Coherence will help Architects and Customers to reach higher level of service and high-availability. This book is available on https://www.packtpub.com/oracle-coherence-3-5/book Need to find out about Table of contents : https://www.packtpub.com/toc/oracle-coherence-35-table-contents Discover a sample chapter : https://www.packtpub.com/sites/default/files/6125_Oracle%20Coherence_SampleChapter.pdf Read also articles from the Authors on http://www.packtpub.com/ : Working with Aggregators in Oracle Coherence 3.5 Working with Value Extractors and Simplifying Queries in Oracle Coherence 3.5 Querying the Data Grid in Coherence 3.5: Obtaining Query Results and Using Indexes Installing Coherence 3.5 and Accessing the Data Grid: Part 1 Installing Coherence 3.5 and Accessing the Data Grid: Part 2 For more information on Oracle Coherence : What Oracle Coherence Can Do for You... : http://www.oracle.com/technology/products/coherence/coherencedatagrid/coherence_solutions.html Oracle Coherence on OTN : http://www.oracle.com/technology/products/coherence/index.html Oracle Coherence Knowledge Base : http://coherence.oracle.com/display/COH/Oracle+Coherence+Knowledge+Base+Home

Read the article
Issue with Godaddy DNS manager

- by Fischer

I'm using domains.live.com to setup an email to a domain registered on Godaddy. The domains.live.com configuration page says: Godaddy's DNS manager isn't accepting this string Value: v=spf1 include:hotmail.com ~all it gives an error, something is wrong, either with the string or with the DNS manager and I would like to know how to fix it. Notes: The more information link is dead, Godaddy no longer gives support by email, no Microsoft support

Read the article

Search Results

Search found 12909 results on 517 pages for 'domain'.

Page 264/517 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271 | Next Page >

- by Rev3rse

- by Daniel Mortimer

- by The Official Microsoft IIS Site

- by Russ

- by ybbest

- by shiju

- by Dave Campbell

- by Stefan Hinker

- by Renan Madeira

- by Dave Campbell

- by Melanie

- by Pinal Dave

- by PointsToShare

- by KunaalKapoor

- by Rishabh Mathur

- by The Official Microsoft IIS Site

- by SanjeevAgarwal

- by van

- by HorusKol

- by Mixhael

- by GGBlogger

- by Henrik Alstad

- by frederic.michiara

- by Fischer

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271 | Next Page >