Search Results

Search found 8460 results on 339 pages for 'links'.

Page 265/339 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

• Can't write to samba share

  - by Tiddo

  I try to setup a samba file server, but whatever I do I can't get write access to work (reading works fine). This is my current situation: I have a local fileserver with 3 harddisks mounted at /mnt/share/disk<nr>. 2 of these use the ext4 filesystem, the third one is ntfs. This file server runs Fedora 18 32-bit. The root folders of these harddisks are owned by superman:superman, and testparm outputs the following: [global] workgroup = WORKGROUP netbios name = FILE_SERVER server string = Samba Server Version %v interfaces = lo, eth0, 192.168.123.191/8 log file = /var/log/samba/log.%m max log size = 50 unix extensions = No load printers = No idmap config * : backend = tdb hosts allow = 192.168.123. cups options = raw wide links = Yes [share] comment = Home Directories path = /home/share/ write list = superman, @users force user = superman read only = No create mask = 0777 directory mask = 0777 inherit permissions = Yes guest ok = Yes I've tried a lot to get this to work: the disk are chmodded to 777, I've tried turning off selinux, I've added the samba_share_t label to the disks and as can be seen in the above output I tried to make the smb config as permissive as I could, but still I cannot write to the share (tried from Windows 7 and another Fedora installation). What can I try to be able to write to the shares? EDIT: The replies I got so far are mostly concerned with the smb.conf. I have however tried a lot of different setup, ready made configs, and solutions to similar problems for the smb.conf file, so I suspect that the real problem is somewhere else.

  Read the article

• Installing mysqlnd for php 5.4.9 on CentOs 6.3

  - by kira423

  Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

  Read the article

• What are the steps needed to set up and use security for AWS command line tools?

  - by chris

  I've been trying to set up the AWS command-line tools following Eric's most useful guide at http://alestic.com/2012/09/aws-command-line-tools. I can't seem to find a good how-to for how to generate the x509 certificate and private key, and how that relates to the various security files the guide creates. Update: I have found a couple of links that describe the some steps. These steps seem to work, however I'm not sure if this is secure & the best way to do it: 1) Create a private key openssl genrsa -out my-private-key.pem 2048 2) Create x.509 cert openssl req -new -x509 -key my-private-key.pem -out my-x509-cert.pem -days 365 Hit enter to accept all of the defaults. Then, from the IAM Dashboard, User, select a user & click on the "Security Credentials" tab. Click on "Manage Signing Certificates", then "Upload Signing Certificate", paste in the contents of my-x509-cert.pem, click OK and it should be accepted. One step that is discussed, but not required for me, was the addition and subsequent removal of a pass phrase on the private key. Should I have been prompted for one, and is my cert potentially unsafe because of this?

  Read the article

• 10 GigE interfaces limits single connection throughput to 1 Gb on a ProCurve 4208vl

  - by wazoox

  The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other machines connected through good ol' 1000 base-T. The interfaces are actually set up as 10 Gig, according to both the switch monitoring interface and the servers (ethtool, etc). However a single connection between two 10 GigE equipped machines through the switch is limited to exactly 1Gb. If I connect two of the 10 GigE machines directly with a CX4 cable, netperf reports the link bandwidth as 9000 Mb/s. NFS achieves about 550 MB/s transfers. But when I'm using the switch, the connection tops at 950 Mb/s through netperf and 110 MB/s with NFS. When I open several connections from 3 of the machines to the 4th, I get 350 MB/s of NFS transfer speed. So each individual 10 GigE ports actually can reach much more than 1 Gb, but individual connections are strictly limited to 1 Gb. Conclusion : the 10 GigE connection through the switch behaves exactly like a trunk of 10 1 Gb connections. That doesn't make any sense to me, unless HP planned these ports only for cascading switches or strictly for many-clients-to-single-server connection. Unfortunately this is NOT the envisioned setup, we need big throughput from machine to machine. Is this a not-so-known (or carefully hidden...) limitation of this type of switch? Should I suggest seppuku to the HP representative? Does anyone have any idea on how to enable a proper behaviour ? I upgraded for an hefty price from bonded 1Gb links to 10 GigE and see exactly ZERO gain! That's absolutely unacceptable.

  Read the article

• How to get Synergy working on Ubuntu 11.10 and Windows 7?

  - by Linda

  I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

  Read the article

• Why is it bad to map network drives in Windows?

  - by Beeblebrox

  There has been some spirited discussion within our IT department about mapping network drives. In particular, it has been said that mapping network drives is A Bad Thing and that adding DFS paths or network shares to your (Windows Explorer/Libraries) Favourites is a far better solution. Why is this the case? Personally I find the convenience of z:\folder to be better than \\server\path\folder', particularly with cmd line and scripting (of course I'm not talking about hard-coded links, naturally!). I have tried searching for pros and cons of mapped network drives, but I haven't seen anything other than 'should the network go down, the drive will be unavailable'. But this is a limitation of any network-accessed storage... I have also been told that mapped network drives poll the network when the network resource is unavailable, however I haven't found more information on this. Wouldn't this still be an issue with other network access mechanisms (that is, mapped Favourites) whenever Windows tries to enumerate the file system (for example, when a file/folder picker dialog is opened)? -- Do network drives poll the network any more than a Windows Explorer library/favourite?

  Read the article

• NGINX Configuration Error using Codex Example: Is This a Typo in Codex?

  - by jw60660

  I installed NGINX using this tutorial: C3M Digital NGINX Tuturial but after reading this article on security issues with "cut and paste" configuration tutorials: Neal Poole's article regarding security and NGINX configuration I decided to follow Poole's suggestion to use the configuration suggested in the WordPress codex: Codex on NGINX Configuration I used the Codex configuration for a multisite installation using W3 Total Cache. When attempting to start NGINX I get an error saying that the /etc/nginx/nginx.conf test failed. The error message was: "Restarting nginx: nginx: [emerg] unknown directive "//" in /etc/nginx/sites-enabled/teambrazil.com:18" When I looked at my site specific configuration at that path I noticed the rewrite rule in the server block was: rewrite ^ $scheme://teambrazil.conf$request_uri redirect; That line in the Codex example was: rewrite ^ $scheme://mysite.conf$request_uri redirect; That looked like a mistake to me, and I changed my line to: rewrite ^ $scheme://teambrazil.com$request_uri redirect; I then attempted to restart NGINX but got the same error message. My question is: is that a mistake, and is there anything more I have to do aside from restarting NGINX after making this change. As suggested by both tutorials I set up the directories: /etc/nginx/sites-enabled and /etc/nginx/sites-available and created the appropriate symbolic links using: touch /etc/nginx/sites-available/teambrazil.com ln -s /etc/nginx/sites-available/teambrazil.com /etc/nginx/sites-enabled/teambrazil.com Is there something else I need to consider after making this correction? Or was it not an error in the first place? I'm pretty stuck here. BTW, I am using Debian squeeze as an OS on Amerinoc's VPS. I'm just getting familiar with VPS administration and am pretty much a noob. Thanks very much, would appreciate any input.

  Read the article

• Hardware chose: ASUS Eee Pad Slider or ASUS Eee Pad Transformer for web development?

  - by JamesM

  I was just wondering out of the following Tablets which one seams better to get? I am a web-developer, Always using Unix/Linux/BSD, I want a tablet that has a keyboard. http://gdgt.com/asus/eee/pad/slider/ http://gdgt.com/asus/eee/pad/transformer/ http://www.tweaktown.com/news/18311/asus_eee_pad_slider_transformer_tablets_with_physical_keyboard/index.html I know both are similar, but not sure what one I should get. The Slider seems very nice but again the keyboard is fixed to the tablet unlike the Transformer. P.S: I'm going to use one of the above to showcase my programming work at school, as well as just being used as a cheaper notebook than the $300 Windows.7 locked down notebooks. By Locked down, I mean we pay $300 for them and after 3 years we can do what ever to them, they are Lenovo thinkpad mini-10 and What they have installed is all you get, they don't let us install what ever OS on them. And with the question on both of those links, I think that the transformer would be better but that is only taking in the fact of it being both a tablet and a notebook. What I really care about is power; which one is more powerful? It will be running kFreeBSD-Debian-Squeeze with Linux-Mint theme with several other packages. Though I'm not going to run Windows (which I feel is bloated), I still want power. To help keep my computer from slowing down with cache, I will have a cron.d/hourly script cleaning out the cache memory.

  Read the article

• How do I identify Blackberry / OWA users in my IIS logs?

  - by Quinten

  We just rolled out a Blackberry Express Server, and would like to make sure that all Blackberry devices that our users own are connecting SOLELY through the BES server. We are running Exchange 2010 SP1. I've read some links that discuss blocking BIS at the firewall level. Before doing that, however, I'd like to individually contact all users with Blackberries and make sure that they have a chance to switch to the BES server. I've sent a company-wide email, but unsurprisingly folks tend to tune these out until they are forced into action. Is there an easy way to identify the users with Blackberries by searching IIS logs, or perhaps using the Exchange Management Shell? Especially some automated way? I've tried searching for the Blackberry identifier, but it does not appear next to any user name, so it's not as helpful as it could be. Edit: to clarify, what I'm talking about is the fact that Blackberries can use OWA to download mail to the phone. We do not allow IMAP or POP access through our firewall so that's not a concern--just folks with Blackberries using Blackberry's hack to allow it to connect to Exchange without a BES server. As far as I know, Blackberries are the only popular phones that use this method to download mail.

  Read the article

• The great Vanishing Act of INetMgr.exe on my Windows 7 x64 system

  - by marc_s

  I'm facing an odd issue with the IIS Manager on Windows 7 (x64). At home, I have Win7 Professional, and when I check my IIS manager icon in the start menu, I see it links to %windir%\system32\inetsrv\InetMgr.exe When I launch this from the command line, it works like a charm. At work, however, I have Windows 7 Enterprise (x64), and when I check my link in the start menu, the entry is exactly the same. If I click on it - it works like a charm. Now if I'd like to launch it from the command line (cmd.exe or TakeCommand), however - the file just isn't there - a DIR %windir%\system32\inetsrv\*.exe shows a number of files, including a "inetmgr6.exe" - but no "inetmgr.exe" - and of course, I can't launch it either :-( Strangely enough, when I look at the directory %windir%\system32\INetSrv in Windows Explorer or Windows Powershell, I SEE the INetMgr.exe file and I can launch it - no problem. What the **** is going on here? How can I find the INetMgr.exe from my classic command line and launch it from there?? UPDATE: ok, some updates. On my work laptop, the INetMgr.exe file appears to really be located in a directory called c:\windows\syswow64\inetsrv (I'm recalling from memory, so don't quote me on the directory name - something like that). I can see this if I search for it in e.g. Powershell or Windows 7 Explorer. However, from a "classic" command line like cmd.exe, it appears to be in c:\windows\system32\inetsrv ..... hmmm.... trouble is - even though I now know where the file really is, I cannot access that directory from my classic command line - not even if I'm running cmd.exe as admin with elevated privileges....... so I know where the file is, but that still doesn't solve my problem :-(

  Read the article

• Does this exist: a standardized way of documenting a file-system structure

  - by eegg

  At work, I'm in charge of maintaining the organization of a whole lot of varied data on a standard file-system. Part of this is coming up with sensible classification (by similarity, need, read/write access, etc), but the bigger part is actually documenting it: what documents/files/media should go where, what should not be in this directory, "for something slightly different, see ../../other-dir", etc. At the moment, I've documented this using a plaintext file filing.txt in every directory I want to document. If someone is unsure what's meant to be in any directory, they read that file. This works alright, but it seems odd that I have this primitive custom solution to a problem that any maintainer of a non-trivial directory structure must experience. Every company I've known of, for example, has some kind of shared file-system where agreed terminology for categorization is important. In my experience, people just have to learn what's what by trial-and-error and experimentation. So allow me to propose a better solution, and hopefully you can tell me if it exists. Any directory on any filesystem can have a hidden plaintext file named .filing. Its contents are descriptive human language. It uses some markup like Markdown, with little more than bold, italic, and (relative) hyperlinks to other directories. Now a suitably-enabled file browser will check for a file named .filing whenever it displays a directory. If it exists, its contents are parsed and displayed in an unobtrusive pane near the directory-path widget. Any links therein can be clicked, and the user will be taken to the target directory of that link. I think that the effort of implementing such a standard would pay back many times over in usability gains. We would have, say, plugins for Nautilus, Konqueror, etc.. It could be used to display directory information in the standard file lists served by webservers. And so on. So, question: does such a thing exist? If not, why not? Do people think it's a worthwhile idea?

  Read the article

• 2010 cgi script failure

  - by Barry F

  Hi. I hope you can help, I'm just a beginner! I have listed a few extra details which may not be relevant. I upload cgi scripts onto local/personal directory on a Apache/2.2.10 server, using FTP95Pro in ASCII. The scripts execute correctly using perl on my web-server in a terminal session. Thus my code has no fatal syntax errors. Webpages 'action' each cgi script at /cgi-bin/. There are symbolic links which link system directory files to my local directory files. FollowSymLinks is enabled (unsure how). Permissions are correct (755). This set-up hasnt changed, apparently. The scripts have excuted perfectly for years, up to 2010. But now, in 2010, I have replaced working scripts with new script/files, now with exactly the same text, filename and permissions. Only the date (last modified) has changed. But now I receive a 500 Internal Server Error, and cannot determine why. My server administator assumes I have code errors. But code is unchanged since last year, and it runs fine (albeit no arguments) on web-server console using perl myscript.cgi Is there anything you can think of which may have changed ? I'm suspicious of the new decade. I think the server swapped from Linux to Windows OS last year, but my server administrator got it all working OK. Is there something unusual he may have missed, related to 2010 ? Thank you in advance

  Read the article

• What is the ideal way to set up multiple FTP enabled web accounts on Fedora?

  - by Nicholas Flynt

  I'm setting up a test server for use as a web development platform, and I'd like to mimic as closely as I can a typical shared hosting setup. That is, I'd like my server to have multple user FTP accounts, each of which links to a directory containing the webroot of the site, and I'd like apache to be able to easily see and manupulate these files. I'll admit: I'm not as familiar with Fedora as I'd like, I run Ubuntu on my home box and SElinux is giving me some grief. My initial plan was to have each user FTP into their home directory, and put the web directory there as well, but SElinux throws a hissy fit when apache tries to access anything outside of its web directory, so that plan was a no go. Would it be wise to continue this route, and perhaps mount web directories in user home folders so that FTP could still be used to access them, even though apache saw them in var/www like it expects? Would it make more sense to set up custom FTP accounts and use a single FTP user on the server box? What's the general course of action on something like this? I'm using vsftpd right now to host web directories, which is why I'm liking the home directory approach (it's simple and secure) but of course there's bound to be a better way to go about it. Thanks. (I'll leave other things, like restricted DB access and such, to another post. I'm interested right now with just getting FTP and apache to play nice in a multi-user environment.) PS: For the record, an issue I ran into when doing all of this was that if apache isn't running as the same user as the FTP account is saving as, there are permissions errors when FTP creates files, requiring the remote user to chmod the files to fix it. A logical fix would be to run apache in a special group, put all web users in this group, and have FTP access default to giving this group read/write access to everything like apache would expect, but I never could figure out how to accomplish this. Bonus points and cake if you know a solution.

  Read the article

• Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

  - by jimp

  I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

  Read the article

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• Small store infrastructure - where to begin?

  - by KevinM1

  It looks like my older brother is about to change jobs - from lawyer to shooting range proprietor - and since I'm the family 'computer guy' I have the task of coming up with and setting up the in-store equipment. Only problem, I don't know how to start or where to look. I'm a web programmer, not an IT specialist. To that end, I figured I should ask the pros. Users: 3 (myself, my brother, and his business partner) Equipment: 1 Windows (likely 7) desktop for POS software, 1 Windows desktop/laptop for backroom use (bookkeeping, etc.) Other: ?? I'm looking for a reliable and, well, idiot-proof way to handle backups. Neither my brother nor his business partner are tech savvy (A web browser, email, MS Word and Excel are about the extent of their knowledge), so I need something they can handle. On-site would be preferable to off-site, given my brother's hesitance to have sensitive business data be handled by an outside source. I'm also looking for a small on-site server. I estimate that, at most, only 2-3 users will need access. A linux solution would keep costs down, but I'm concerned about Windows <- linux interoperability. Would the store security cameras' storage be handled by the security company, or would we have to stream that data to our own server? I know from my own experience with personal security that the company gives/loans a recording device to the home owner, but I'm not sure about business security. I know this sounds like a shopping list, and it's pretty vague. I wish I could give more detail, but between my own ignorance and things not being 100% nailed down on the business end, I'm a bit stuck. At the very least I'd like a nudge - links on a place to start, what to look for, things I need to think about, etc. - for this endeavor. Thanks.

  Read the article

• Move the uploads folder in Wordpress

  - by Victor Hurdugaci

  Currently, my Wordpress' upload folder is located in \wp-content\uploads. Initially there was no structure so all files were put there. After a while it was changed to upload the files in \wp-content\uploads\YEAR\MONTH. Now that folder contains a mix of files (those starting with + are folders) like: +wp-content | +2010 | | +02 | | | File-1 | | | File-2 | | | .. | | | File-n | | +01 | | | File-1 | | | File-2 | | | .. | | | File-n | +2009 | | +12 | | | File-1 | | | File-2 | | | .. | | | File-n | | +11 | | | File-1 | | | File-2 | | | .. | | | File-n | +.. | | | .. | Unstructured-file-1 | Unstructured-file-2 | ... | Unstructured-file-n Based on the dates of the unstructured files, I would like to move them in a structured hierarchy (based on date, move it to a folder \wp-content\uploads\YEAR\MONTH). Now, my questions are: Where do I write and execute a script to the movement (I don't have full access to the server, just to a cPanel and to the Wordpress Admin page)? What must be updated so that the links in posts, that reference the unstructured files, point to the new location of those files? Not fully related to the previous description: is it alright to move the whole uploads folder to another location, like \uploads? PS: Moving the files/updating the database manually is not an option :)

  Read the article

• What options to use for Accurate bacula backup ?

  - by Kiss Stefan

  It's actually 2 question in one. First is a bit more theoretically. So when specifying accurate options how does bacula figure out if a file needs to be backed up ? it's a simple AND ? As in if the options are Accurate = sm5 bacula will not backup the file if ((size = old size) AND (modtime = old modtime) AND (md5 = old md5)) Is that correct ? Do any of the options take precedence ? as in would be a file skipped if modif time is diffreent but it has the same md5sum ? Are there any implied options that you cannot ignore ? Practical case, ( bacula 5.0.1 ) I have to back-up a svn repo, in order to be able to make incremental backups as simple as posible i am hotcopying (client run before) it to another location, that bacula will backup ( then delete it with client run after). Now in the fileset i have Accurate = spnd5 This should tell bacula to take into consideration size , permission bits number of links , decreases in size and md5sum. However , an incremental is also including a full copy of the svn. What am i doing wrong ? it seems that it takes into account creation time even tho i have not specified it.

  Read the article

• How do I keep a bridge enabled on a bonded interface?

  - by jlawer

  I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

  Read the article

• mshtml.dll latest version for Internet Explorer 8, Windows XP Service Pack 3

  - by AllSolutions

  Many applications in my system (Internet Explorer 8, Yahoo Messenger, Skype 10) are crashing and error details shows module name mshtml.dll. I checked the version of mshtml.dll in system32 folder. It is 8.0.6001.19170. My Internet Explorer version is 8.0.6001.18702. I am not concerned about crash of IE, because I generally use Firefox, but how do I solve the crashes in other applications, which are due to mshtml.dll? I have moved to Windows XP Service Pack 3 (32 bit). I have tried to update Internet Explorer 8 (from Tools-Windows Update), but again it crashes. I can not migrate to IE 9, as it requires Vista or Windows 7. I have applied Cumulative Security update for IE8, which has this file name: IE8-WindowsXP-KB2618444-x86-ENU.exe I could not get much info from Microsoft sites or Google. I do not want to use Automatic Updates feature of Windows. Can somebody give the download links for mshtml.dll and any associated files, which I can replace in system32 folder? Thanks.

  Read the article

• How can i export a folder of Firefox Bookmarks into a text file

  - by Memor-X

  I want to clean up my bookmark folders by getting rid of duplicated/links. i have created a program which will import 2 text files which contains a URL like this File 1: http://www.google/com http://anime.stackexchange.com/ https://www.fanfiction.net/guidelines/ https://www.fanfiction.net/anime/Magical-Girl-Lyrical-Nanoha/?&srt=1&g1=2&lan=1&r=103&s=2 File 2: http://scifi.stackexchange.com/ http://scifi.stackexchange.com/questions/56142/why-didnt-dumbledore-just-hunt-voldemort-down http://anime.stackexchange.com/ http://scifi.stackexchange.com/questions/5650/how-can-the-doctor-be-poisoned the program compares the 2 lists and creates a single master list with duplicate URLs removed. Now i have a few Backup bookmark folders in Firefox which on occasion i'll bookmark all tabs into a new folder with the date of the backup before i close off tabs or do reset my PC. each folder can have between 1000-2000 bookmarks, sometimes there are a bunch of pages which keep getting bookmarked, ie, i have ~50 pages on the Magical Girl Lyrical Nanoha Wiki on different spells, character and terminology which i commonly look back on. I'd like to know how i can export a bookmark folder so i have a list of URLs similar to what i use in my program

  Read the article

• Terminal Server in Windows Server 2003

  - by Hemal

  I have a confusion regarding what I am doing here. At present I have a Windows Server 2003 server with SP2. I have assigned RAS/VPN server role to it (through Manage my server wizard) and in my router, I setup the IP address of my RAS/VPN server as PPTP server. Staff leave their workstations ON all the time and access them from home through RDP. They first connect thorugh VPN & in the RDC they simply type their respective IP or computer name to access the office network from home. Everything works fine so far except: Staff have to leave compuers always ON in the office Speed is very slow depend how many staff members access the VPN network I was told to install and configure Terminal service to improve this situation. I already added TS Role in the server but I don't know how to clients can access the TS server from home or remote location. I really appreciate any good links or guidence from the experts in this group regarding this. Thank you in advance for any replies!

  Read the article

• Apache Virtual host (SSL) Doc Root issue

  - by Steve Hamber

  I am having issues with the SSL document root of my vhosts configuration. Http sees to work fine and navigates to the root directory and publishes the page fine - DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ (as specified in my vhost config) However, https seems to be looking for files in the main apache document root found further up the httpd.conf file, and is not being overwritten by the vhost config. (I assume that vhost config does overwrite the default doc root?). DocumentRoot: The directory out of which you will serve your documents. By default, all requests are taken from this directory, but symbolic links and aliases may be used to point to other locations. DocumentRoot "/var/www/html/websites/" Here is my config, I am quite a new Linux guy so any advise is appreciated on why this is happening!? NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/https_domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.co.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.o.uk-access_log common SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /var/www/ssl/ssl_domain_co_uk.crt SSLCertificateKeyFile /var/www/ssl/domain.co.uk.key SSLCACertificateFile /var/www/ssl/ssl_domain_co_uk.ca-bundle </VirtualHost> <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-access_log common </VirtualHost>

  Read the article

• VLAN for WiFi traffic separation (new to VLANing)

  - by Philip

  I run a school network with switches in different departments. All is routed through to a central switch to access the servers. I would like to install WiFi access points in the different departments and have this routed through the firewall (an Untangle box that can captive-portal the traffic, to provide authentication) before it gets onto the LAN or to the Internet. I know that the ports that the APs connect to on the relevant switches need to be set to a different VLAN. My question is how do I configure these ports. Which are tagged? Which are untagged? I obviously don't want to interrupt normal network traffic. Am I correct in saying: The majority of the ports should be UNTAGGED VLAN 1? Those that have WiFi APs attached should be UNTAGGED VLAN 2 (only) The uplinks to the central switch should be TAGGED VLAN 1 and TAGGED VLAN 2 The central switch's incoming ports from the outlying switches should also be TAGGED VLAN 1 and TAGGED VLAN 2 There will be two links to the firewall (each on its own NIC), one UNTAGGED VLAN 1 (for normal internet access traffic) and one UNTAGGED VLAN 2 (for captive portal authentication). This does mean that all wireless traffic will be routed over a single NIC which will also up the workload for the firewall. At this stage, I'm not concerned about that load.

  Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >