Search Results

Search found 16628 results on 666 pages for 'setup kit'.

Page 266/666 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• Swap on Ubuntu: No primary partition

  - by 3l4ng

  I am running Ubuntu 13.10 64bit on a system with 4GB RAM, dual booting with Windows Most people say that it is good to have swap on a system, and results in speed, so I used it with my previous Ubuntu installations. In my new HDD, I use 3 primary partitions: 1 for Windows OS, 1 for Ubuntu and 1 for data. The windows system also took up one primary partition for system, and I have only 4 MBR slots. Effectively I have no primary partition for SWAP. I do not know it happened earlier, but back then I had a partition for swap as well My CURRENT disk partitioning looks like this: http://imgur.com/YMTr879 How can I create swap in my current setup?

  Read the article

• Backing up bind mounted folders

  - by NahsiN

  My layout is as follows. LVM Setup: /dev/VG/Documents, /dev/VG/Music, /dev/VG/Pictures, /dev/VG/Music, /dev/VG/Documents, etc.... Each of the LVMs is bind mounted to the corresponding folder name in /home/foo. For example, /home/foo/Documents bind mounted to /media/Documents (mount point of /dev/VG/Documents), etc. If I set up deja-dup to just back up my home folder, am I guaranteed that everything from my LVMs will be backed up properly? So let's say I take away my LVMs for some reason and choose to restore an earlier backup. My home folder will contain everything from the LVMs? All my docs, music, vids etc. My intuition tells me everything will be fine but it doesn't hurt to ask the the experts ;). Hope I have made myself clear. Thanks

  Read the article

• Booting from Live USB leads to command line instead of menu

  - by Alek

  I'm trying to install 12.04 x64 from a USB stick. I created the Live USB as per instructions from ubuntu.com, however, after choosing to boot from USB I get stuck with a command line, titled GRUB. When I type "install", it replies that "no kernel is loaded". On my other PC everything is fine, the Live USB boots just fine. The one I'm trying to install to has UEFI mobo - maybe that's the problem? However, fiddling with UEFI settings in mobo setup (UEFI/Legacy) has no visible effect.

  Read the article

• How do I get VirtualBox to work?

  - by Karasu

  I can't seem to make VirtualBox to work, I've installed it and reinstalled by 3 ways: Terminal, Ubuntu Software Center and VirtualBox's official web site installation and I keep getting the same kernel error. I found a "solution" to this problem by typing in terminal: sudo apt-get install virtualbox-dkms But it tells my that "virtualbox-dkms is already the newest version". Then I typed in terminal what the error tells me: sudo /etc/init.d/vboxdrv setup but then I tells me that DKMS is actually NOT installed (which is a contradiction). If anyone has encountered the same problem and actually solved it please tell me and explain me step by step 'cause I'm new to Linux.

  Read the article

• Improve Your Photo Prints By Properly Preparing Your Printer

  - by Eric Z Goodnight

  Whether your photo printer is new or has been collecting dust between the holidays, you’ve likely spent a few frustrating moments setting up the machine. But did you know proper setup can improve the quality of your prints? Spend a few moments looking over the basics, and see why it can be a good idea to keep your drivers updated, learn about some basic printer maintenance, and see some advanced options for setting up great prints. Keep reading Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation Winter Theme for Windows 7 from Microsoft Score Free In-Flight Wi-Fi Courtesy of Google Chrome

  Read the article

• Installing Ubuntu on virtualbox with a windows 8 host

  - by ubershmekel

  Installing ubuntu-13.10-desktop-i386.iso gets me to the graphical login screen but after I enter the password I get a black screen. Ctrl-Alt-F2 brings me to a terminal where I can restart lightdm, enter my password again to see another black screen. The screen saver can actually kick into action there and I was told to update packages, but no unity or other ui, just blackenss. The host is windows8-x64 and Virtualbox 4.3.2. I tried installing ubuntu-12.04.3-desktop-i386.iso but that hung during setup. Is there a way to debug? I'm now trying to install Debian to see if that works but wow the network installer takes its sweet time... Update: Debian does work though it gives me a notification that Gnome 3 failed to load. The visual desktop works though so I don't know if there was a substantive problem.

  Read the article

• Why does the Git community seem to ignore side-by-side diffs

  - by Kyle Heironimus

  I used to use Windows, SVN, Tortoise SVN, and Beyond Compare. It was a great combination for doing code reviews. Now I use OSX and Git. I've managed to kludge together a bash script along with Gitx and DiffMerge to come up with a barely acceptable solution. I've muddled along with this setup, and similar ones, for over a year. I've also tried using the Github diff viewer and the Gitx diff viewer, so it's not like I've not given them a chance. There are so many smart people doing great stuff with Git. Why not the side-by-side diff with the option of seeing the entire file? With people who have used both, I've never heard of anyone that likes the single +/- view better, at least for more than a quick check.

  Read the article

• Windows Phone 7 and WS-Trust

  - by Your DisplayName here!

  A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() {     var client = new WSTrustClient(         new WSTrustBindingUsernameMixed(),         new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"),         new UsernameCredentials(_txtUserName.Text, _txtPassword.Password));     return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) {     _client = GetWSTrustClient();       var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer)     {         AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/")     };       _client.IssueCompleted += client_IssueCompleted;     _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding>   <binding name="mixedNoSessionBearerBinary">     <security authenticationMode="IssuedTokenOverTransport"               messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10">       <issuedTokenParameters keyType="BearerKey" />     </security>     <binaryMessageEncoding />     <httpsTransport/>   </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) {     var binding = new CustomBinding(         new BinaryMessageEncodingBindingElement(),         new HttpsTransportBindingElement());       _proxy = new StarterServiceContractClient(         binding,         new EndpointAddress("…"));     using (var scope = new OperationContextScope(_proxy.InnerChannel))     {         OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR));         _proxy.GetClaimsAsync();     } } works. download

  Read the article

• Application starts as Terminal but not as a Desktop entry

  - by Dcm1405

  I just installed SQL Anywhere 12 and can start Sybase Central from the terminal with the command line below without errors: /opt/sqlanywhere12/bin32/scjview However, when I try to start it from a desktop entry I am receiving two error messages that could be something incorrectly defined in the desktop below: #!/usr/bin/env xdg-open [Desktop Entry] Version=1.0 Type=Application Terminal=false Icon[en_US]=gnome-panel-launcher Name[en_US]=Sybase Central Exec=/opt/sqlanywhere12/bin32/scjview Comment[en_US]= Name=Sybase Central Comment= Icon=gnome-panel-launcher Here are the error messages: (unable to post the error images) cannot find libsyblib610_r.so cannot find libulscutil12.so Since the application can be successfully started from a terminal window I was wondering how I could have it setup as a desktop entry as well.

  Read the article

• How can I access profile fields with a % variable in Drupal Actions?

  - by Rob Mosher

  I have an action setup in drupal to e-mail me when a new user registers for the site. Right now it is only telling me their user name (%username). Is there a variable that can access added fields so I can get their real name (First Last), or another way to add this info to the action message? So instead of my new user action having a message like: "%username created an account" - "jschmoe created and account" I could have: "%first_name %last_name (%username) created an account" - "Joe Schmoe (jschmoe) created an account". I'm using Content Profile module for the first and last name fields, though have few enough users at the moment that I could switch to Profile module fields.

  Read the article

• GtkFileChooserButton 'Select Folder' mode returns no path

  - by user8592

  I have added a GtkFileChooserButton to my app via Glade. It is set to folder selection mode. When the widget is clicked it shows a dropdown list of Nautilus bookmarks with an 'other' option in the end. A new file chooser dialog is launched when 'other' is clicked. The button is not connected to any other custom file chooser dialog. The connecting signal I am using is 'file-set' and I am retrieving the fullpath of user selected folder using Gtk.FileChooser.get_current_folder (). This setup works fine if user selects a folder from 'other' option. But if a user selects a bookmark from dropdown list, no path is returned. How to solve this? Is there a way to disable this dropdown list and directly go to the filechooser dialog? I want to use GtkFileChooserButton only so that the user can get a preview of his selected folder.

  Read the article

• Failure to start grub with Wubi

  - by Marco Ceppi

  My laptop battery ran down and died while using Ubuntu 10.04 with Wubi. Upon recharge (and restart) selecting Ubuntu from the Windows Boot menu brings me to the typical prompt which says (and I paraphrase): Trying hd(0,0) on Disk... After that the screen flickers to white (for a split second) then black. No grub menu comes up (as I would expect) no cursor, no grub sh prompt. Nothing. I've tried switching TTYs to no avail. As there are no logs, I can't trouble shoot anything. I've run a check disk from windows (on the NTFS partition the root.disk is stored) with no luck. What is causing this failure to load grub (and, by association Ubuntu) - How can I restore my setup and get Ubuntu via Wubi working?

  Read the article

• I Need Help With A Game (Well The API)! [closed]

  - by user1758938

  I'm not "sure" which API (or language) I should use for a little 3D FPS game I'm gonna make although I don't have helpers lol. Anyway I'm ok with Java, C# and C++ but I need a good setup (easy to use) with the tools I need to make the game. I tried things like XNA but I want to check other options first because I don't like how it makes a installer and stuff, it's really annoying. I Need A API That Can Do These Things: 3D Rendering Input Sound And If It's Not Too Much To Ask Some Cool Shaders, Dynamic Lighting And A 3D Sound System Im "Ok" If I Have To Use Multiple APIs To Do This But Please Help Me!

  Read the article

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Unrecognized Display

  - by Kevin

  I just installed a fresh copy of Ubuntu 12.04, and before I installed drivers, I was able to get my two monitor setup working just fine. However, after updating all my drivers and installing all the recommended software, my second display is no longer detected. My main display is called "Laptop" (which it was detected as the monitor name previously), but it is the only display listed. I tried to detect displays, nothing happened. The monitor is plugged in, and should be working fine - after all, it just was. How can I fix the problem of Ubuntu not listing my second monitor in the display settings?

  Read the article

• Can I use a desktop as a network server?

  - by Jhourlad Estrella

  Pardon me if I'm asking the wrong question. But I am a newbie in networking and I'm not sure what direction to go on this. I have just setup an Ubuntu Desktop. I am planning to convert it to a network server without losing the GUI interface (again, I'm a newbie) and use it to manage and monitor user access to a network with a small number of network terminals all running on Windows. My purpose is to use the new server to filter sites accessed by each terminals, monitor sites being visited by employees and grant access to both group and user-specific folders based on their IP address. Is this possible? What server software do I need to install? How do I structure the hardware? (I have a router, a hub, the Ubuntu server and the network terminals) How do I assign privileges to users and monitor them at the same time? Thank you in advance for your replies.

  Read the article

• Ubuntu 12.04 crashes on startup for newer versions of Linux, possibly related to WiFi

  - by Jake

  My computer gets to the screen with the Ubuntu logo and the orange/white dots, and then the screen goes black, spits out a lot of error messages, and cannot boot. (If it'd be helpful, I can take a photo of my screen in this state.) I've found I can successfully boot if my wireless card is turned off. As soon as I turn it on, my computer crashes with the same black screen of death. I can also successfully boot if I choose "Previous Linux Version" and select a few versions back (I think 3.0.6). Here are some relevant details about my setup: Ubuntu 12.04 Computer: Lenovo x230 Wireless: Realtek RTL8188CE 802.11b/g/n WiFi Adapter Processor: Intel Core i5-3210M CPU @ 2.50GHz × 4 RAM: 16 GB of RAM Thank you!!!

  Read the article

• Why does Unity in 2d mode employ scaling and the default othographic size the way it does?

  - by Neophyte

  I previously used SFML, XNA, Monogame, etc to create 2d games, where if I display a 100px sprite on the screen, it will take up 100px. If I use 128px tiles to create a background, the first tile will be at (0,0) while the second will be at (129,0). Unity on the other hand, has its own odd unit system, scaling on all transforms, pixel-to-units, othographic size, etc etc. So my question is two-fold, namely: Why does Unity have this system by default for 2d? Is it for mobile dev? Is there a big benefit I'm not seeing? How can I setup my environment, so that if I have a 128x128 sprite in Photoshop, it displays as a 128x128 sprite in Unity when I run my game? Note that I am targeting desktop exclusively.

  Read the article

• How do I run Conkeror in Emacs?

  - by Anake

  I have been using emacs for about 3 months, and have been amazed by how much improved my interactions with my computer are. I now use eshell rather than a separate terminal, and the last thing I still need to leave my emacs environment for is for my web browser. I have been reading up on Conkeror, and it seems almost ideal (emacs keybindings, no need to use the mouse etc.) but it runs in a separate window. If it could be run within emacs, it would mean that I would never really have to have interaction with the actual OS, which would be good for someone who is forced to rotate between linux, mac and windows (i.e. me). I understand that it couldn't be run from emacs in -nw mode, but would it be possible (or likely) that Conkeror could be setup to run within an emacs window? Note: - I've tried w3m and didn't really like it

  Read the article

• Problems installing Ubuntu on unallocated space

  - by Adam

  I've been trying to install Ubuntu on some unallocated space, but I'm getting confused with the manual partition setup. I didn't want to try the other options for it suggested that everything on my drive would be erased (but I might be wrong) I have an old(ish) laptop with a 60GB hard-drive. Theres a Windows 7 partition of 30GB, followed by 20GB of unallocated space, then HP's Windows recovery partition of under 10GB. Do I need to format the empty space in windows first? What's the recommended method in this case?

  Read the article

• Ubuntu 14.04 + nvidia-331-updates makes a blank desktop screen

  - by Achint

  I upgraded my installation from 13.10 to 14.04. The problem is that whenever I install the Nvidia drivers from the GUI, upon reboot or trying to login again it only shows the wallpaper of my desktop and nothing else. The mouse does move around, but nothing works. I am unable to open a terminal or do anything else. If I go into the tty console and purge the drivers, then things seem to work again. I have an Optimus setup, with an onboard Intel and discrete Nvidia GTX770M card. It's a 64-bit architecture. I really need to work with CUDA, and was hopeful after hearing that nvidia-prime was released, but this is a real downer. Any help on this?

  Read the article

• Mounting Samba share whenever it's available, unmounting when it's not

  - by Laurynas Biveinis

  I am trying setup permanent samba share mounts. That's not too hard using these instructions. But, I want them to Automatically remount whenever I join the network where these shares are available. Automatically unmount (or make access requests fail immediately instead of hanging) whenever I leave the network, i.e. avoid this automatically. Googling suggests that AutoFS might be helpful. I gather it takes care of the 1. above but I am not sure about the 2. The other questions about automated Samba mounts, i.e. How to mount a samba share permanently?, do not seem to address automatic remounts/unmounts, so I think this is not a duplicate. Thanks.

  Read the article

• Computer Lab School for Orphans

  - by Brendon

  I am helping out an NGO, called Orphans Found Fund, here in Arusha Tanzania setup a computer lab to teach students about Ubuntu and open source applications. I have installed Ubuntu 10.10 on all the systems. What I'm wondering about is how to tweak the systems so that the kids cannot: Delete or alter system files Alter the system settings Add or remove applications Exceed a time limit (like an Internet Cafe) Also as the administrator I would like to monitor the usage for another system to make sure that abuse of network is not taking place. Any advice is much appreciated. Brendon

  Read the article

• Using 'new' in a projection?

  - by davenewza

  I wish to project a collection from one type (Something) to another type (SomethingElse). Yes, this is a very open-eneded question, but which of the two options below do you prefer? Creating a new instance using new: var result = query.Select(something => new SomethingElse(something)); Using a factory: var result = query.Select(something => SomethingElse.FromSomething(something)); When I think of a projection, I generally think of it as a conversion. Using new gives me this idea that I'm creating new objects during a conversion, which doesn't feel right. Semantically, SomethingElse.FromSomething() most definitely fits better. Although, the second option does require addition code to setup a factory, which could become unnecessarily compulsive.

  Read the article

• Implementation of a Rules Engine in Your Business Applicaitons

  - by enonu

  I'm for an experience driven answer from a few software engineers who have implemented a rules engine in their internal business applications. How has it affected your business in the following ways: Ability to launch and iterate over business driven logic Ability to have "business users" perform the actual modification of those rules rather than developers. Ability to comprehend the business rules in general. Quality of the software releases. More or less bugs from the end-user's POV? Speed of the applications. If you had to do it all over again, what would you do differently? Lastly, I'm looking for a qualification of your answer w/ respect to the architecture. Would you do the same thing if you were deploying to a 1-machine setup vs. your architecture vs. a multi-tier cloud-based distributed architecture using 1000s of machines? How would it be different? Thanks!

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >