Search Results

Search found 45894 results on 1836 pages for 'super'.

Page 266/1836 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

  • Unmountable boot volume blue screen, what should I do?

    - by Josh
    I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

    Read the article

  • How do I troubleshoot a slow hard drive?

    - by Bruce Connor
    My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

    Read the article

  • Can I run more than 4 virtual machines using Hyper-V Windows Server 2008 R2 Enterprise Edition as th

    - by James Holland
    I understand that a single Windows Server 2008 R2 Enterprise Edition license includes 4 free guest virtual machines using Hyper-V. Suppose I do that, and have 4 VMs running, but then want to expand. If I separately purchase additional Windows licenses, or I consolidate a machine with an existing license, can I spin up a 5th, 6th virtual machine (presuming there are enough CPU/RAM resources on the host)? Or does the host OS limit the number of virtual machines allowed?

    Read the article

  • window services works after local account used before this account

    - by Gauls
    Hi All of a sudden my window services app after installation does not start(Some services stop automatically if they have no work to do) uses custom user, if i change the logon setting to use local system account and click start works fine, then when i go back and change to use this account (local user- custom user under user group) and then click start it works fine, why didn't work in the first place???????????? Thanks

    Read the article

  • Erase just the free space on my hard drive

    - by Patriot
    I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

    Read the article

  • OSX: Mimic Ubuntu IP Masquerading via iptables with ipfw

    - by Dogbert
    Good day, I am attempting to replicate a setup I have between a router and an Ubuntu PC, and have the same setup working on my MacBook (10.6, Snow Leopard). First, I have a router that has a USB port. When I plug it into my Ubuntu PC, it creates an RNDIS connection, allowing me to connect to the router over the USB cable via an IP connection. When I plug it into my computer via USB, it gets assigned an IP address of 172.16.84.1, and a new adapter appears when I type ifconfig. I can then SSH into the device via ssh [email protected]. When I log in to the device, I flush the routes, then create the default route: admin@localhost> route -f admin@localhost> route add default 172.16.84.2 Now, in my Ubuntu machine, I use iptables to enable IP masquerading: root@Valhalla> sudo iptables -t nat -A POSTROUTING -s 172.16.84.2 -j MASQUERADE Once this is all done, the router has internet access over the USB connection to my PC. I am trying to replicate this exact setup on my MacBook now (Snow Leopard), but iptables does not exist for OSX, not even a Macports version exists. I have scoured through other questions on StackOverflow that cover the usage of the ipfw command, which apparently works as a drop-in replacement for iptables. However, the syntax is significantly different, and I'm pretty much lost. Does anyone with some experience with ipfw have some suggestions on how I could accomplish this and create a NAT connection via IP masquerading like I could with my Ubuntu PC? Thank you for your assistance.

    Read the article

  • How to convert an image to a .dwg file

    - by erikric
    My girlfriend is making an art project where she is having an image printed and cut out on a metal plate. The firm responsible for doing this is demanding a .dwg file (and something called polyline; some sort of setting maybe?). Neither of us have heard about this file format, and I find the information about it quite confusing. Most pages seem to link to some schetchy "FooToBarConverter" software, that I frankly don't trust. Could someone please enlighten us on what we need to do, or point to some safe and preferably free software that could do this? (An explanation of the dwg format and the polyline thing would also be much appreciated)

    Read the article

  • Options for gaming remotely on a LAN?

    - by Schwern
    I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

    Read the article

  • Sustaining Dual Channel among many RAM modules

    - by Odys
    I'd like to know what are the factors that need to be set in order to sustain the Dual Channel mode. In a mobo with 4 DDR3 slots: Do I have to put pair of chips? Eg: If I put 3 identical chips only, will I have Dual channel or not? If I put 4 Ram chips that aren't from of same ventor/model, will I have the same latency among them (the highest of all)? Also, will I sustain Dual Channel mode? If one Ram has max frequency of 1033 and the other 3 chips are of 1300, will I have 1033Mhz for all chips and Dual Channel mode on? What if I put 2x4Gb and 2x8Gb chips (latency, Dual Channel)? Can I put 4Gb chips in slots 1 and 3 and 8Gb in slots 2 and 4 and still have dual channel mode enabled? (Some of the questions might sound silly but their answers aren't that clear to me) (Also, assume that there aren't any bottlenecks because of other parts on the system)

    Read the article

  • MacPorts, Fink, etc.

    - by Ben Alpert
    On my Mac OS X (10.5, soon to be 10.6) machine, how would you recommend I install various software that's been ported from Linux? I don't install such software very frequently, but I've been using MacPorts and it always seems quite slow, presumably because it has to compile the packages on-the-fly. I'd much prefer a package management system that has binary packages, saving me the need to compile things every time I want to download something new. I think Fink has binaries for some of the packages, but I usually see MacPorts recommended as the system to use. Which do you think works better and why? (Or is there another system that I haven't heard of?)

    Read the article

  • Unhappy with performance of GBit Ethernet to Fiber converter

    - by Aaron Digulla
    I just bought a TP-Link MC200CM GBit Ethernet (1000-T) to Fiber (1000-SX) media converter. The device works but I'm unhappy with the performance: When connecting my computer over 1000-T (twisted pair, Cat 6, 18meters) with my server, I get a throughput of about 610MBit/s. If I replace the cable with two media converters, I'm left with about 310-315MBit/s (i.e. half the performance). My setup is like this: Computer <- GBit switch <- long cable <- GBit switch <- server Computer <- GBit switch <- MC200CM <- 30m fiber <- MC200CM <- GBit switch <- server Is there a way to improve the performance? Will another MC be faster? Or is that about as much as I can expect with the additional 2 converters?

    Read the article

  • What SDK I should choose on Amazon Web Service to build API on server app?

    - by Nguyen Minh Binh
    I am a newbie on Amazon Web Service. I have a task that setup then build a web service that provide APIs to Mac OS, iOS, Android client. There are some APIs and Database need to be kept in secure. I see that AWS support multiple platform such as Java, .Net, PHP,... It also support many Database Management System. Not yet, there are 2 special SDK for Android and iOS app. So, What should I choose (Java, .Net, PHP,...) to carry out my task? Does AWS support all webservice protocol? Does it support secure webservice? Thanks a lot.

    Read the article

  • ASUS P6X58D and 12 GB of RAM

    - by Hunter
    I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

    Read the article

  • Is there any desktop version available for wsywyg editors

    - by user825904
    I have been searching for long and i am not able to find one editor which i can always keep open for daily notes keeping with some codes and which highlights the code Just like we have our editor where we ask questions. ALl is want is I can write some text as normal Then i have few php code which i can write and then click some code button or like we have ctrl +K and i gets higlighted then on the same page i write some paragraph text as normal withoout higligting and some bullet points Then again i get some c++ code and i wrap that around on the same page and page grows daily Currently i use notepad++ and it does not support syntx higlighting of different langages on same page and on individual blocks. it highights all the file even the normal text as well basically i am looking wsywyg editor but as windows desktop application

    Read the article

  • Netcat server output with multiple greps

    - by Sridhar-Sarnobat
    I'm trying to send some data from my web browser to a txt file on another computer. This works fine: echo 'Done' | nc -l -k -p 8080 | grep "GET" >> request_data.txt Now I want to do some further processing before writing the http request data to my txt file (involving regex maniuplation). But if I try to do something like this nothing is written to the file: echo 'Done' | nc -l -k -p 8080 | grep "GET" | grep "HTTP" >> request_data.txt (for simplicity of explanation I've used another grep instead of say awk) Why does the 2nd grep not get any data from the output of the first grep? I'm guessing piping with netcat works differently to what I've assumed to get this far. How do I perform a 2nd grep before writing to my txt file? My debugging so far suggests: It is nothing to do with stderr vs stdout Parentheses don't help

    Read the article

  • tomato firmware unstable when I am connected to Chromecast

    - by Graviton
    I have an Asus RT-N12D1, and I installed the tomato firmware by shibby ( version tomato-K26-1.28.RT-N5x-MIPSR2-112-Max.trx). However I found that the connection can be really unstable. Whenever I stream youtube videos on TV via Chromecast ( I tried both the cast from iPad and Win7, both can reproduce the problem), the router will frequently restart itself, leading to a loss of connection and subsequent reconnection. I want to get this problem fixed, but I don't know how. Is there anyway where I can troubleshoot what is the real problem, or is there anyway I can collect enough log information so that I can then present to the original developer for a fix ( maybe)?

    Read the article

  • How to fix 0x80071A91 error in Windows Vista / backup Vista system?

    - by John
    I am getting this error below: "File backup could not save your automatic backup settings for the following reason: Transaction support within the specified file system resource manager is not started or was shutdown due to an error. (0x80071A91) Please try again." I tryed this (to fix) on cmd: “fsutil resource setautoreset true C:\” as an adm But did not work. What I want is to make a backup of all my files.

    Read the article

  • Querying a CSV file

    - by sheepsimulator
    Does anyone know of a simple tool that will open up a CSV file and let you do basic, SQLesque queries on it? Like a graphical tool of sorts, one that is easy to use. I know I could write a small script to do an import of the CSV into a SQLite database, but since I imagine someone else thought of this before me, I just wanted to inquire if one existed. What's prompting this question is I am getting frustrated with Excel's limited filtering capabilities. Perhaps some other data visualization manipulation tool would provide similar functionality. Free or OSS is preferred, but I'm open to any suggestions. EDIT: I really would prefer some clear tutorials on how to do the below instead of just "make your sheet an ODBC entry" or "write programs using ODBC files", or more ideas on apps to use. Note: I cannot use MS Access. Yet another EDIT: I'm still open for solutions using SQLite. My platform is a semi-ancient Win2k laptop, with a P4 on it. It's quite slow, so a resource-light solution is ideal and would likely get the win.

    Read the article

  • Software to aid using camera as a scanner

    - by xxzoid
    I want to digitize some index cards with my camera. I'm looking for a program that would automatically fix geometry on the shots (as you would expect the cards come tilted on the picture). I have an app (droid scan lite) on my android phone that does exactly that, but I would prefer to do it on my pc (the phone camera has poor quality and it's slow and focuses badly while I have a decent slr). If the program is open source it's an advantage, cross platform -- even more so.

    Read the article

  • Remotely push DNS server to client via OpenVPN

    - by wishi
    Hi! When I try to push a DNS server via the OpenVPN server-config I don't get that server to be the first DNS server on the connected client system. It ends up being specified as an alternative DNS server. push "dhcp-option DNS 89.238.75.146" # DNS-Server 1 (local djbdns) To overcome certain network restrictions, if they're at place, I use 443 TCP. - That means that my DNS queries are sent via TCP (if I manually reconfigure the DNS server), which doesn't scale very well from a performance perspective. Are there any kewl solutions for that? Marius

    Read the article

  • How can one undelete an accidentally deleted fan page?

    - by Doug T.
    No clue if this is an appropriate SU question or if it's best migrated elsewhere. I help administer a Facebook fan page for a local business. Recently one of the other administrators accidentally deleted the Facebook fan page. We have tried to fill out this form: http://www.facebook.com/developers/developer_help.php And have yet to receive a response. We are desperate to have the fan page restored. Thanks for any pointers.

    Read the article

  • How to analyze CBS.log file by SFC command to detect corrupt files in Windows 7?

    - by energydream2007
    Hey I have some problems with my Win7 so I've ran sfc /scannow and I got this message: "Windows Resource Protection found corrupt files and was unable to fix some of them..." I also told to look at the folder of the log file to find the cbs.log. After that I've ran this command to pull out the actual problems/corrupt files: findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt" This command have created an sfcdetails text file (download). Can someone help me to analyze this file? I haven't found a detailed article about it so far.

    Read the article

  • How to get Windows 7 to automatically connect to an ad-hoc network?

    - by George Edison
    I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

    Read the article

  • rsync command deletion error "IO error encountered -- skipping file deletion"

    - by Jam88
    I use rsync command to take backup of files from one of my ubuntu server to another ubuntu machine. Backup server trigger a script that use rysnc command. Here is the command I use rsync -rltvh --partial --stats --exclude=.beagle/ --exclude=.* --delete-after root@live_server:/home/ /home/live_server_backup/home /tmp/logfile.log 2&1 live_server is ssh-able without password. So it works. Now problem is with --delete-after option After all file synced .At the end I can see deletion procedure skipped.logfile error is like IO error encountered -- skipping file deletion When i tried to find log there were some error while file sync rsync: send_files failed to open "/home/xyz/Desktop/PPT_session_1_context.pdf": Permission denied (13) So my understanding is as rsync could not read all the files from target for safety reason it is skipping the file deletion. Is there any way to make --delete-after work even if there is some permission error? I do not want to use force deletion as it will be dangerous in some situation.

    Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >