Search Results

Search found 18628 results on 746 pages for 'artificial neural network'.

Page 267/746 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• Access VirtualBox-ed server from behind the router

  - by migajek

  I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Impacting the Future through Collaboration at Alliance 14

  - by Jeb Dasteel-Oracle

  We’re hearing good things about the Alliance 14 conference held in Las Vegas by the Higher Education Users Group (HEUG) back in March. For those of you who aren’t familiar with Alliance 14 conferences, they are global events dedicated to enhancing and educating its members and the world on how higher educational institutions can utilize Oracle applications to change how they do business. The HEUG is an all-volunteer organization made up of individuals who collaborate with Oracle as part of the evolving higher education industry. Conference participants network with peers from other institutions (regionally and globally) to share the challenges; discuss solutions and ideas, and collaborate on HEUG strategic initiatives. The HEUG enables each institution to be a part of the ever-changing Oracle landscape. Watch the video below and hear directly from the attendees about their experience with Oracle and how being part of the HEUG has allowed them to  collaborate with one of their most importance resources... and with each other. Oracle is committed to fostering a strong and independent network of user groups worldwide. Currently over 900+ groups provide dynamic forums for customers to share information, experiences and expertise. If you’re interested in more information or joining an Oracle User Group, click and become part of a vibrant network of engaged users finding the best ways to get the most value from their Oracle investment and collaborating to provide a unified feedback voice to Oracle. Catch you next time, Jeb

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• Windows user cannot connect via application, but can via Remote Desktop

  - by C. Ross

  I have an application (ASG-Zena) giving an 1385 error (Logon failure: the user has not been granted the requested logon type at this computer) when trying to run a batch job. I have checked on "Access this computer from the network" includes Everyone and Administrators and many others. "Deny access to this computer from the network" make sure that Guest is not listed there. If you still have problems, then maybe make sure that nothing is listed there. Administrative tools...local security policy..security options "Network access sharing and security model for local accounts" there are 2 options either classic or 'guest only'. Mine is set to classic. (These diagnostics come from this post) The account in question is added to the Administrator group on this computer. I know the login is valid because I regularly login to the server via remote Desktop. What other settings should I check?

  Read the article

• Do I need a VPN to secure communication over a T1 line?

  - by Seth

  I have a dedicated T1 line that runs between my office and my data center. Both ends have public IP addresses. On both ends, we have a T1 routers which connect to SonicWall firewalls. The SonicWalls do a site-to-site VPN and handle the network translation, so the computers on the office network (10.0.100.x) can access the servers in the rack (10.0.103.x). So the question: can I just add a static route to the SonicWalls so each network can access each other with out the VPN? Are there security problems (such as, someone else adding the appropriate static route and being able to access either the office or the datacenter)? Is there another / better way to do it? The reason I'm looking at this is because the T1 is already a pretty small pipe, and having the VPN overhead makes connectivity really slow.

  Read the article

• Setting up the metasploitable in virtualbox

  - by SetSlapShot

  I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

  Read the article

• ISA Proxy server

  - by user59931

  Have a proxy at work that runs Microsoft ISA. i used to be able to connect using 11.10 with firefox no problem at all. i could either put the settings in firefox or the settings in ubuntu network proxy settings. this would give me a connection no problem ( slow due to the work network being really lame) since i upgraded with 12.10 firefox just crashes if i have any proxy settings (manual added the proxy settings). if i connect to a diffrent network without the proxy settings it works fine and doesn't crash i tried chrome to see if that would work... simular problem. chrome doesn't crash but is so slow it just times out all the time and can take 10min for a page to load.... not really sure where to go with this? i have tried a clean install of 12.04 on 2 diffrent computers and also both tried just upgrading from 11.10. Only answer i can see at the moment is role back to 11.10 :( i have tried all sorts like turning of IPv6 to see if that would make any diffrence but no joy... really am lost now. whats weird is the repositys are also really really slow through 12.04. 50 megs took an hour to download (ISA server has Ubuntu rep servers enables without authenication). really am lost

  Read the article

• osx 10.6 dhcp client-id option

  - by Clustermagnet

  Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• Ubuntu based VPN server behind NAT router?

  - by maartenn88

  I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

  Read the article

• Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

  - by Chris

  We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

  Read the article

• Make BIND use DHCP DNS as backup

  - by cainmi

  I run BIND locally on my OS X machine, to enable wildcard Apache vhosts, which requires setting the DNS server for all network interfaces to 127.0.0.1. This works great, but means when I am on a network which uses an internal DNS server to route special (i.e. .companyname) URLs to a server on the network, the lookup fails. I tried adding both 127.0.0.1 and the DHCP provided DNS server, but this doesn't work either. Is there a way to make BIND use the DHCP DNS server for requests it cannot resolve locally?

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Wireless connection disconnects and reconnects with a Netgear WNA1000

  - by William Berkenkamp

  Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

  Read the article

• No Other User In Task Manager Users Tab Windows 7

  - by Samuel Adam

  I want to ask why there is only me on Task Manager's Users tab. Originally I wanted to be able to chat with other clients on my local network using msg command, but I can't found any other user. How to see other users on the same network? I use Work Network, and all of the users is using wifi to connect. I googled about it, but no information is close enough. As much as a newbie question it sounded, I really appreciate any help. Thank you ! :)

  Read the article

• Set Valid IP On Vmware Vm's Help Please

  - by Shahin At

  I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

  Read the article

• How can I make the NetworkManager work?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop, and lately I've been trying various stuff about network configuration through command line. Last night, I tried removing the NetworkManager using "yum remove NetworkManager" from the system, so that I could have more control of the network through the command line. But the result is, I didn't manage to configure the wireless connection through wpa_supplicant, and I need wireless connection during my travel to another place. So I need the wireless function back as soon as possible. I typed " yum install NetworkManager", some version installed, but I don't get to have an icon on the taskbar, and of course, the network doesn't work. The package I previously removed(about 24MB) was much larger that the one I just installed(about 2MB), so I think some dependencies must be missing. How could I install all these dependencies? Please help!

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Tunneling over HTTP

  - by Morgan

  Hello, I have a network at work that is locked behind a firewall and Internet connection is available only by using a proxy server. At work, I can connect to databases that are distributed across the network. However, at home, I cannot connect to the proxy server or the databases. How can this be done? I can access my workstation via LogMeIn, so I can install anything on it. I thought of installing some kind of tunneling mechanism in my workstation. Then, at home, I could connect to this mechanism, which would in turn do the required connections. So essentially, what I'd like to do can be represented by the following diagram: Home = Workstation = Database. For example, whenever I connect to, say, 10.140.0.1:1234 at home, this would be redirected to 10.140.0.1:1234 of my Workstation, because 10.140.0.1:1234 is only available through the corporate network. NOTE: I'm using Windows XP.

  Read the article

• what are the vulnerabilities installing openvpn client on a customer's unattended server?

  - by senorsmile

  We run Pfsense as our primary firewall. We also have OpenVPN server running on that box to allow us to remotely connect to our network. My question is: if we have a customer's mostly unattended server that we want to access remotely, what security vulnerabilities are there to installing openvpn on the customer's server as a client connecting to our network. Presumably, we would want to limit/restrict that server's access to the rest of our network. How do we lock openvpn down and are there ways to detect abnormal activity coming from an openvpn client?

  Read the article

• Taking stock of an existing ASA Firewall

  - by Nate

  Imagine you are given an existing network using an ASA firewall. The network works, but you aren't sure of anything else. The firewall may be completely improperly configured, with "outside" actually being inside and "inside" actually being outside, for all you know. My question is this: what are the commands to take stock of an existing ASA firewall setup? With only CLI access, how do I figure out: What interfaces are available The names of the interfaces The security levels attached to the interfaces The access-lists attached to the interfaces, including rules and directions I know how to set these things (interface, nameif, security-level, and access-list/access-group), but I don't know how to figure them out given an existing system. On a related note, is there anything else that I should worry about checking to make sure that the network isn't wide open? Thanks!

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >