Search Results

Search found 19350 results on 774 pages for 'address book'.

Page 269/774 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276 | Next Page >

new PC not work with existing router, but works fine when directly connecting to cable modem

- by user34786

I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

Read the article
How to enable a Web portal-based rich enterprise platform on different domains and hosts using JS without customization/ server configuration

- by S.Jalali

Our company Coscend has built a Web portal-based communications and cloud collaboration platform by using JavaScript (JS), which is embedded in HTML5 and formatted with CSS3. Other technologies used in the core code include Flash, Flex, PostgreSQL and MySQL. Our team would like to host this platform on five different Windows and Linux environments that run different types of Web servers such as IIS and Apache. Technical challenge: Each of these Windows and Linux servers have a different host name and domain name (and IP address), but we would like to keep our enterprise platform independent of host server configuration. Possible approach to solution: We think an API (interface module with a GUI) is needed to accomplish this level of modularity and flexibility while deploying at our enterprise customers. Seeking your insights: In this context, our team would appreciate your guidance on: Is there an algorithmic method to implement this Web portal-based platform in these Windows and Linux environments while separating it from server configuration, i.e., customizing the host name, domain name and IP address for each individual instance? For example, would it be suitable to create some JS variables / objects for host name and domain name and call them in the different implementations? If a reference to the host/domain names occurs on hundreds of portal modules, these variables or JS objects would replace that. If so, what is the best way to make these object modules written in JS portable and re-usable across different environments and instances for enterprise customers? Here is an example of the implemented code for the said platform. The following Web site (www.CoscendCommunications.com) was built using this enterprise collaboration platform and has the base code examples of the platform. This Web site is domain-specific. We like to make the underlying platform such that it is domain and host-independent. This will allow the underlying platform to be deployed in multiple instances of our enterprise customers.

Read the article
How to do port forwarding in D-link Glb802c?

- by Manish

I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My questions are: What will be my Global Address 'To'? What will be my Global Address 'From'? In Destination Port "From" and "To" what do I select in the drop down list and port no for forwarding HTTP traffic (for my website)? In Local Port, what do I select in drop down list and port no?

Read the article
How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

- by bithacker

I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

Read the article
Branding/Restricting a Software by License/Serial

- by Sid

I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

Read the article
HP DV6 connects but no internet

- by Frank Barcenas

I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

Read the article
Windows 7 ipv4 autoconfiguration - cannot connect to internet

- by GuiccoPiano

I get my internet connection from a guy (lets call him my service provider henceforth). He gives internet connections to many students here in my hostel. My PC gets a private IP through his DHCP server. Now, when I switch on my WiFi, my PC gets a private IP as it should and I can connect to the internet just fine. But now when I connect my LAN cable, my PC gets some "Autoconfiguration IPv4 address" 169.254.110.154(Preferred) and I cannot connect to the internet. Here is the ipconfig /all output for ethernet port: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8059 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : <<MAC DISPLAYED HERE>> DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5054:a347:7d06:6e9a%11(Preferred) Autoconfiguration IPv4 Address. . : 169.254.110.154(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 285222078 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-50-AC-68-54-42-49-EE-52-16 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I also tried: Start a command prompt as admin. Run "netsh winsock reset" Run "netsh interface ipv4 reset" Run "netsh interface ipv6 reset" Restart your computer. All this does not work. Any idea to solve the problem?

Read the article
How to convince non-programmer his notions about computers are wrong?

- by Suma

Recently I came across a question about 64b on SuperUser for which the accepted answer seemed like a complete nonsense to me. I made two comments pointing out obvious mistakes. To my perplexion, the comments had an effect of the poster of the answer being alienated. I have no idea how could I convince him he is wrong, as he does not seem to understand the basics of the problem. He seems to be mixing concepts like bus size and address size - see the pearl sentence "it will allow you to address all of your RAM because your processor is reading from your RAM in 64 bit words.". The poster asks me to provide proves of my claim by quoting a respectable source, but I have no idea where to find such source, as I doubt anything I would consider relevant would be relevant for him (it would be probably too technical). I think this instance can serve as an illustration of communication problems between programmers and users (and to certain extent even to any expert vs. non-expert communication). How should a programmer handle a communication like this, so that is does not become a useless quarrel?

Read the article
How to configure sendmail to relay through a specific server

- by ErebusBat

I have a tiny home server setup behind my cable modem (bresnan communications). I want to be able for this box to send out email (not receive) for notifications and whatnot. What I have already done: I have installed and configured sendmail. I have added mail.bresnan.net as my SMART_HOST directive. What I belive the problem is When I attempt to send an email I get the following in my mail log: Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: from=aburns, size=140, class=0, nrcpts=1, msgid=<[email protected]>, relay=aburns@localhost Dec 22 10:24:17 batcave sm-mta[1531]: oBMHOHWZ001531: from=<[email protected]>, size=397, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: to=<[email protected]>, ctladdr=aburns (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30140, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (oBMHOHWZ001531 Message accepted for delivery) Dec 22 10:24:18 batcave sm-mta[1517]: oBMH9mVv001357: to=<[email protected]>, ctladdr=<[email protected]> (1000/1000), delay=00:14:30, xdelay=00:00:42, mailer=relay, pri=300339, relay=pmx0.bresnan.net. [69.145.248.1], dsn=4.0.0, stat=Deferred: Connection timed out with pmx0.bresnan.net. You can see where the message is accepted for delivery by my sendmail server, then where it attempts to hand off to bresnan's server and it timesout. This is where my question is. Asstute readers will notice that pmx0.bresnan.net is not what I have my SMART_HOST directive set as. This is the (outside?) MX server for the bresnan.com/net domain. Apparently bresnan has their network configured so that you can not access this server from within their own network and instead must use the mail.bresnan.net server (which I can connect to). The problem is that I don't know how to tell sendmail to use this server and not the domain. What I have tried Setting a hosts entry so that the pmx0 server points to the mail IP address. This doesn't work, which makes sense as sendmail is obviously doing an MX query to find the server which returns the IP so there is never a need to do a 'normal' DNS resolve so the hosts file never gets involved.

Read the article
How do I bridge my wireless to my wired connection?

- by gatoatigrado

I want to bridge the wireless connection with the wired connection. The wireless is the host and the wired is the client, so to speak. Internet sharing (inet <--> wifi <--> ethernet) I tried to bridge my ethernet connection by going to network manager edit connections wired edit IPv4 settings shared to other computers Screenshots However, it seems to automatically disconnect half a second after it says "connection established"! edit 2 got the network manager logs, it seems the address is in use. See http://pastebin.com/DjqRshxW , line 45. nm-tool output is here: http://pastebin.com/x5Aci5V1 . I tried firestarter, as mentioned in another thread, and no luck. I don't have time to bother with a dozen command line tricks, unless is copy & pasting a shell script... so please suggest ways that use GUIs and/or won't leave my computer in a confused state (e.g. disabling network manager, manually connecting to a WPA network, installing brutils, etc.). edit: one idea that would work, if it's possible -- is there a way to share connections via SSH and SOCKS5? I'd need to do this at a system-wide level though; I only know how to do it through the browser now. Then, I could run ifconfig eth0 192.168.4.1 on the computer sharing the inet, and ifconfig eth0 192.168.4.2 on the computer I'm trying to share with; I know this does work for host-to-host transfers. edit 3 If I run sudo killall dnsmasq, then nothing is using the 10.42.43.1 address the network manager sharing wants to use. But now it just takes longer to die, with error "NetworkManager[5935]: dnsmasq died with signal 9" [ http://pastebin.com/4FNtpugi ]. Looking at just the commands [ http://pastebin.com/1vrtQeWk ], maybe it's trying to route eth0 to itself? I'm not that familiar with networking things though.

Read the article
EDQ Technical Enablement for OPN (Prague - June 17-19)

- by milomir.vojvodic

Oracle Enterprise Data Quality (EDQ) Technical Enablement and Partner Training Trusted Data for Your Enterprise Applications Oracle Enterprise Data Quality helps organizations achieve maximum value from their business-critical applications by delivering fit-for-purpose data. These products also enable individuals and collaborative teams to quickly and easily identify and resolve any problems in underlying data. With Oracle Enterprise Data Quality, customers can identify new opportunities, improve operational efficiency, and more efficiently comply with industry or governmental regulation. Oracle Enterprise Data Quality is designed to serve as a very channel friendly platform to OPN. This means that pre-built extensions, components and even complete business solutions can readily be built and shared. This allows our customers/partners to be highly efficient in how they deploy custom business solutions, but also allows our partners to develop specialized components, domain knowledge and even complete business solutions. Training is suitable for: · Database administrators · Architects · Technical staff Objectives of the training: After completing this course, participants should: · Have an understanding of the core functionality of EDQ across profiling, auditing, transforming, parsing and matching data · Be able to describe some of the key capabilities and benefits delivered by EDQ · Be able to create and run standalone EDQ processes and jobs · Be ready to start working with data from customers and (with practice) be able to demonstrate EDQ to customers Agenda 17th June Fundamentals For Demoing (Profile, Audit, Transform and More) Profiling Auditing Transforming Writing and exporting data Jobs and scheduling Publishing, packaging and copying EDQ processes Introduction to the Customer Data Extension Pack Realtime Processing via Web Services The Server Console Run Profiles Data Interfaces Sampling Publishing metrics to the Dashboard Users and security 18th June Matching Matching overview Basic matching configuration Matching rule hierarchies Clustering Merging Reviewing possible matches Outputting Match Data Case study 19th June Address Verification Address Verification Overview Configuration Accuracy Flags Parsing Parsing Overview Phrase profiling Tailoring a CDEP Parser Base Tokenization Classification Reclassification Selection Resolution Register Here Don’t miss this FREE event. Space is limited. Oracle University V Parku 2294/4 148 00 Praha 4 17.6. – 19.6. 2014 09:00 a.m.– 17:30 p.m.

Read the article
Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

- by bytebuster

There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

Read the article
How to link specific ports to specific domains with Apache virtual hosts?

- by theJoe

We have a forward-facing linux box running Apache HTTP server that is acting as a reverse proxy for several back-end servers. The servers are accessed through specific domain names and ports and are set up as virtual hosts within Apache as such: Listen 8001 Listen 8002 <Virtualhost *:8001> ServerName service.one.mycompany.com ProxyPass / http://internal.one.mycompany.com:8001/ ProxyPassReverse / http://internal.one.mycompany.com:8001/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> <Virtualhost *:8002> ServerName service.two.mycompany.com ProxyPass / http://internal.two.mycompany.com:8002/ ProxyPassReverse / http://internal.two.mycompany.com:8002/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> The proxy server has only one IP address, and both domains are pointing to it. Accessing internal.one via service.one works fine, as does accessing internal.two via service.two. Now the problem is that Apache does not take the requesting domain into account when accessing the virtual hosts. What I mean is that both domains work for both ports: requests for service.one:8002 proxies to internal.two:8002, and requests for service.two:8001 proxies to internal.one:8001, where ideally both these requests should be denied. I can get around this by creating more virtual hosts that explicitly deny these requests: NameVirtualHost *:8001 NameVirtualHost *:8002 <Virtualhost *:8001> ServerName service.two.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> <Virtualhost *:8002> ServerName service.one.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> But this is not an ideal solution, since we plan to add more services to the proxy, and each new port would need to be explicitly denied on all the other domains, and each new domain would need to be explicitly denied on all ports it is not utilizing. As we add more services, the number of virtual hosts can get out of hand quickly. My question, then, is whether there is a better way? Can we explicitly tie specific ports to specific domains in a virtual host so that only that domain-port combination is processed, and all other combinations are not? Things I’ve tried: Adding NameVirtualHost *:8001, etc. without the additional virtual hosts. Setting ProxyRequests On and Off, as well as ProxyPreserveHost On and Off Adding the server name or IP address to the virtual host header, e.g. <VirtualHost service.one.mycompany.com:8001> Using the <proxy> directive inside the virtual host directive. Lots and lots of googling. The proxy server is running CentOS 6.2 64-bit, Apache HTTPD server 2.2.15. As mentioned, the proxy server has only one IP address, and all the domains we are using are pointing to it.

Read the article
IPv4 NameVirtualHost, IPv6 VirtualHost

- by MadHatter

Like many of us, I have an apache server (2.2.15, plus patches) with a lot of virtual hosts on it. More than I have IPv4 addresses, to be sure, which is why I use NameVirtualHost to run lots of them on the same IPv4 address. I'm busily trying to get everything I do IPv6-enabled. This server now has a routed /64, which gives me an awful lot of v6 addresses to throw around. What I'm trying to find is a simple way to tell each v4-NameVirtualHost that it should also function as a VirtualHost on a unique ipv6 address. I really, really don't want to have to define each virtual host twice. Does anyone know of an elegant way to do this? Or to do something comparable, in case I've embedded any dangerously-ignorant assumptions in my question?

Read the article
Preferred method for allowing unprivileged UNIX/Linux users to view syslog information

- by Joshua Hoblitt

I have some non-privileged "role accounts" that need the ability to view [some of] the local syslogs (eg. /var/log/messages) for debugging purposes. This is explicitly local log data, not remote syslog, logstash, etc. Obviously, there's several ways to address this issue. What I'd like to know is if there is a fairly "standardized" way to solve this issue. Typically, I solve this problem with sudo but either POSIX groups or acls is attractive as it's few chars for the users to type and it removes entries from the sudo log. However, I don't believe I've ever seen that done before. What is your experience? How do large install base sites address this?

Read the article
Fresh Apache install can't be connected to

- by Wayne M

I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

Read the article
VLSM help required

- by user68062

I have confused myself following a VLSM tutorial and need to get my understanding confirmed, would this be the correct format, or am i away off again 172.31.0.0 VLSM this network address for as many subnetworks as possible, with no more than 14 hosts in each subnetwork. Show the subnet mask used. As the ip address is class b and contains 16 bits in the network portion, this means that we can have 2^16 = 65536 possible networks, to give each of these networks a maximum of 14 hosts we would use the subnet prefix \28 for each subnet. Is this correct? Thanks BB

Read the article
Multiple subnets behind SonicWall TZ 180

- by Derek

We have a SonicWall TZ180 that acts as a VPN endpoint. Right now it has one WAN IP address and a /24 assigned to the LAN interface. Our mail cluster administrator asked if it was possible to add a second private class C behind the VPN. This second subnet would be available to the other network and then we would use address objects and acls to limit access. Is this possible? I read up on PortShield but I don't know if that's what we would need to use because we're pushing all data out of one physical port into a Cisco switch that has VLANs already set up. Addendum: It appears that PortShields will do what I want with only one limitation; it requires a direct 1-1 relationship of portshield to physical port. This would then limit us to 4 PortShields on 1 TZ180. Is there a better solution than this?

Read the article
Connecting to my SMTP server

- by Joseph Silvashy

I have a few questions, I just installed SMTP on my Ubuntu server, and I want to know how to connect to it from a different machine... I'm not really clear. I tried: telnet my.servers.ip.address 25 I think it's running on port 25, but I don't know where to find out, its not in the conf file anywhere. Additionally do I need it to be a FDQN? or can I just access my mail server via it's IP address? I know that the service works on the machine because I'm able to echo test | mail -s "test" [email protected] Any help debugging or understanding this would be helpful, thanks guys!

Read the article
Cross subnet connection

- by user30472

My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

Read the article
Lost connectivity after configuring multiple network adapters on separate networks

- by Dave Long

I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

Read the article
Disable IPv6 on Debian VPS

- by chris_l

I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case.

Read the article
My gmail password hacked in Firefox?

- by ellockie

While writing a message using Firefox suddenly my gmail login details, including password, were pasted into the body of my message at the current cursor position and in the browser's find field (whole password and a bit of email address in the latter). I don't store my passwords in the browser nor in any of it's addons, although I keep it in one of Chrome's extensions. I don't use whole email address to login, only the user name, so it's very strange and worrying. I must admit I clicked some suspicious link the same day (by checking the root of the domain first), but I quickly closed that page and after that I haven't used that password. Both Avira and Spybot didn't detect anything. What was it and what can I do to make sure my browser is safe?

Read the article
How to embed word doc as background picture of an Access report using .EMF or equivalent ?

- by iDevlop

My company's standard paper has logo, address and all the details in the right margin with a vertical blue line. I have that as a word template. I want to have the same thing as the background of my Invoices report. I managed to do that 5 years ago by saving to EMF format (vector format, prints out nicely) and putting the file as the background of the report. Now my company is moving, and I need to change the address on my invoices, but I can't find out how I did to convert the word doc to EMF. Any suggestion ? By EMF or another process, but I want to avoid BMP, which is huge and does not print nicely. Thanks !

Read the article
spam email forwarding by server

- by kikio

Let's start with this scenario: We have a mailbox (i.e. in yahoo), every message is sent by this account, marked as spam by Gmail spam filter. (because the address or sender IP is blacklisted, not because of content) There is a server which is able to forward incoming messages to another address (email forwarding), for example, to a Gmail mailbox. And it is not blacklisted. The question is: If we send a message, through the dirty mailbox to the server, and server forward it to a Gmail mailbox, will it marked as spam by spam filters?

Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276 | Next Page >