Search Results

Search found 9125 results on 365 pages for 'boot disc'.

Page 269/365 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• How to check DVD region settings in Window 7

  - by jmatthias

  I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

  Read the article

• busybox shell refuses to execute the particular line of script

  - by neil1234

  Hi, I am using busybox shell to execute a script which the bash executes when i boot linux using the nfs. Please let me know the correct alternative for this line. cur_major=$((0x`stat -c %t $dev 2>/dev/null`)) The busybox throws in an error saying "0x" syntax error, which i understand is the problem with the syntax of this line. Thanks in advance

  Read the article

• CD-ROM Cant Be Accessed After Installing VMware Tools on VMware Server 2.0.2

  - by Optimal Solutions

  Using VMware Server 2.02, I set up a new VM (Windows XP Pro) applied all of the updates, added Windows addons from the install CD, etc... I got it to a stable point and up through that point I was able to access the CD-ROM drive (E: on my host). What I never did before was install "VMware Tools" and since it claims to give better mouse and video support, I gave it a shot. What it does is it places the install package in a virtual CD-ROM drive. I ran the install, no errors and it wants a reboot. I log back in after reboot and pop in the install CD for Microsoft Office 2003 and I receive the message "Please Insert A Disc Into Drive D:". Drive D: would be the next logical drive after the C: drive where I chose to install the OS. The message box sits there and if I click "Cancel", to return to Windows Explorer, the status bar seems to blink ever 1/2 second - as if its polling for a CD-ROM drive or something. No bangs or exclamations in the Device Manager for any hardware. I had taken a snapshot prior to the VMware Tools install and upon restoring it, the CD-ROM is back. I made copies of two other VMs, installed the VMware Tools on those VMs and both experienced the same issues: Windows 2003 Server and Windows 7 (32-bit). Has anyone seen this issue and know of a fix for this? It would be nice to have the better graphics and better mouse control AND use my CD-ROM drive as well! Thank you.

  Read the article

• Would it be possible to speed up Android Emulator by removing unnecessary apps\

  - by Stan

  I am using Android SDK 1.6 and developing some simple apps. It seems everytime Android Emulator loads every default apps, like message music browser etc... I guess this cause the booting process slow (takes 1 minute overhead for me to test the code every time). Would it be possible to take these apps out and just have my apps on the emulator? My purpose is to have a faster boot up time on emulator. Thanks.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• BIOS corrupted? How to proceed? Acer Travelmate 290

  - by dtlussier

  I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• DMG mounting warning message says "it may make computer less secure or cause other problems"

  - by Cawas

  When I try to open a DMG file I get this: I'll just transcript the image: There may be a problem with this disk image. Are you sure you want to open it? Opening this disk image may make your computer less secure or cause other problems. What does that mean in fact? What's really wrong with it, and what kind of problem can it cause just by mounting? Someone said: When you download a file in Leopard (and Snow Leopard), it's marked as a quarantined file. This occurs by the OS adding an attribute to the file, tagging where it came from (such as "downloaded by Safari"). This is what causes the user to see prompts when running files that were downloaded from the Internet, you may remember being asked to confirm you'd like to launch program XXX downloaded by Safari on XXX date. As a new part of Snow Leopard, files which are tagged with the quarantine attribute also have integrity checked by fsck, and if that verify fails you will see the message you described, triggered by an unused node in the disc image. But really, I didn't get that. What's quarantine? I've just downloaded a file here on SL, tried to open, and got that warning. Apple have a say about quarantine files, and they seem to work the same on Leopards. Plus I have got that file using Google Chrome while that feature seems to work just with Safari.

  Read the article

• MBR Booting from DOS

  - by eflukx

  For a project I would like to invoke the MBR on the first harddisk directly from DOS. I've written a small assembler program that loads the MBR in memory at 0:7c00h an does a far jump to it. I've put my util on a bootable floppy. The disk (HD0, 0x80) i'm trying to boot has a TrueCrypt boot loader on it. It shows up the TrueCrypt screen, but after typing in the password it crashes the system. When I run my little utlility (w00t.com) on a normal WinXP machine it seams to crash immedealty. Apparently I'm forgetting some crucial stuff the BIOS normally does, my guess is it's something trivial. Can someone with better bare-metal DOS and BIOS experience help me out? Heres my code: .MODEL tiny .386 _TEXT SEGMENT USE16 INCLUDE BootDefs.i ORG 100h start: ; http://vxheavens.com/lib/vbw05.html ; Before DOS has booted the BIOS stores the amount of usable lower memory ; in a word located at 0:413h in memory. We going to erase this value because ; we have booted dos before loading the bootsector, and dos is fat (and ugly). ; fake free memory ;push ds ;push 0 ;pop ds ;mov ax, TC_BOOT_LOADER_SEGMENT / 1024 * 16 + TC_BOOT_MEMORY_REQUIRED ;mov word ptr ds:[413h], ax ;ax = memory in K ;pop ds ;lea si, memory_patched_msg ;call print ;mov ax, cs mov ax, 0 mov es, ax ; read first sector to es:7c00h (== cs:7c00) mov dl, 80h mov cl, 1 mov al, 1 mov bx, 7c00h ;load sector to es:bx call read_sectors lea si, mbr_loaded_msg call print lea si, jmp_to_mbr_msg call print ;Set BIOS default values in environment cli mov dl, 80h ;(drive C) xor ax, ax mov ds, ax mov es, ax mov ss, ax mov sp, 0ffffh sti push es push 7c00h retf ;Jump to MBR code at 0:7c00h ; Print string print: xor bx, bx mov ah, 0eh cld @@: lodsb test al, al jz print_end int 10h jmp @B print_end: ret ; Read sectors of the first cylinder read_sectors: mov ch, 0 ; Cylinder mov dh, 0 ; Head ; DL = drive number passed from BIOS mov ah, 2 int 13h jnc read_ok lea si, disk_error_msg call print read_ok: ret memory_patched_msg db 'Memory patched', 13, 10, 7, 0 mbr_loaded_msg db 'MBR loaded', 13, 10, 7, 0 jmp_to_mbr_msg db 'Jumping to MBR code', 13, 10, 7, 0 disk_error_msg db 'Disk error', 13, 10, 7, 0 _TEXT ENDS END start

  Read the article

• Order of the [BITS 16] and [ORG 0x0000] directives

  - by dboarman-FissureStudios

  I am beginning some experimentation in writing a kernel and having fun doing it. I have the basic boot-loader done and the following directives: [BITS 16] [ORG 0x0000] In the kernel tutorial, however, it starts with: [ORG 0x0000] [BITS 16] I was wondering if the order in which these directives are given makes a difference? I am using NASM version 2.06rc2, OpenSUSE 11.2

  Read the article

• Ant + JUnit = ClassNotFoundExceptions when running tests?

  - by rfkrocktk

  I'm trying to run some tests in Ant presently using JUnit, and all of my tests are failing with the following stacktrace: java.lang.ClassNotFoundException: com.mypackage.MyTestCase It doesn't make too much sense to me. I'm first compiling my test cases using <javac>, then directly running the <junit> task to run the tests. My buildfile looks like this: <target name="compile.webapp.tests"> <javac srcdir="${test.java.src.dir}" destdir="${test.java.bin.dir}"> <classpath> <filelist> <file name="${red5.home}/red5.jar"/> <file name="${red5.home}/boot.jar"/> <file name="${bin.dir}/${ant.project.name}.jar"/> </filelist> <fileset dir="${red5.lib.dir}" includes="**/*"/> <fileset dir="${main.java.lib.dir}" includes="**/*"/> <fileset dir="${test.java.lib.dir}" includes="**/*"/> </classpath> </javac> </target> <target name="run.webapp.tests"> <junit printsummary="true"> <classpath> <filelist> <file name="${red5.home}/red5.jar"/> <file name="${red5.home}/boot.jar"/> <file name="${bin.dir}/${ant.project.name}.jar"/> </filelist> <fileset dir="${red5.lib.dir}" includes="**/*.jar"/> <fileset dir="${main.java.lib.dir}" includes="**/*.jar"/> <fileset dir="${test.java.lib.dir}" includes="**/*.jar"/> </classpath> <formatter type="xml"/> <batchtest todir="${test.java.output.dir}"> <fileset dir="${test.java.bin.dir}" includes="**/*TestCase*"/> </batchtest> </junit> </target> This is really weird, I can't seem to fix this. Is there something I'm doing wrong here?

  Read the article

• Copy from CDROM is very slow in Ubuntu

  - by ???

  I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

  Read the article

• can't backup to a NAS drive as offline schedule task

  - by imageng

  I have seen this problem issue discussed in several forums including this one, but could not find a solution. On MS server 2003 I configured a Backup task, the target backup is on a NAS disc (Seagate BlackArmor NAS 110). The backup task is working well as a scheduled task or by a direct command, when I am logged on. It is not working when the user is offline (in this case - Administrator). I already tried the following actions: 1) addressing to the target as network drive (Y:location..), 2)Using UNC instead, 3) making the drive a domain member (the NAS admin S/W allows to define itself as a domain member) The result log message for 1 and 2 is: "The operation was not performed because the specified media cannot be found." The result log message for 3 is empty file. The schedule task "RUN" command is: C:\WINDOWS\system32\ntbackup.exe backup "@C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\de-board.bks" /a /d "Set created 2/14/2010 at 5:10 PM" /v:yes /r:no /rs:no /hc:off /m incremental /j "de-board" /l:s /f "\10.0.0.8\public\Backups\IBMServer\de-board.bkf" 10.0.0.8 is the static IP of the NAS. "Run only if logged on" is NOT marked. Password of the administrator user is set. It is obvious that there is no access to the NAS when the user is logged-out. Do you have any idea how can I solve it? Thanks

  Read the article

• rake db:migrate gives a uninitialized class variable @@configuration in Rails error

  - by PK

  uninitialized class variable @@configuration in Rails /usr/lib/ruby/gems/1.8/gems/rails-2.1.0/lib/initializer.rb:19:in `configuration' /usr/lib/ruby/gems/1.8/gems/thoughtbot-factory_girl-1.2.2/lib/factory_girl.rb:24 /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' This is the initial part of the enviroment.rb: RAILS_GEM_VERSION = '2.1.0' unless defined? RAILS_GEM_VERSION require File.join(File.dirname(__FILE__), 'boot') Rails::Initializer.run do |config| config.gem "oauth", :version => "0.2.7", :lib => "oauth"

  Read the article

• RHEL 5.2 installing on ProLiant BL460c - hangs at 'now booting the kernel'

  - by Dr Rocket Mr Socket

  As the title states, I have a problem. This server and the installation disc are also on the other side of the world to me so... So far, I have tried to start the install with the parameters: linux text noapic noacpi no=apic no=acpi which results in the same hang. I have also disabled a PCI ethernet adapter, I am uneasy about disabling the onboard ethernet adapter I do not know if ILO uses this. Anyone have any advice? Much appreciated. EDIT: full output after trying to begin the installation. boot: linux text Loading initrd.img.................. Loading vmlinuz....... Uncompressing Linux...done. Now booting the kernel stays on this for hours EDIT2: adding the 'mem=40960M' (server has 40 gigs of ram) parameter allows it to proceed but the following output directly after 'Now booting the kernal' Memory: sized by int13 0e801h initrd extends beyond end of memory (0x00ef2090 > 0x00000000) disabling initrd Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory Structure at 0x000ffee0 pcibios_init : BIOS32 Service Directory entry at 0xf0000

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• Possible to host CentOS netinstall files on a local HTTP/FTP?

  - by garlicman

  I'm running XenServer on an Dell R610 and am running into a catch-22. During install from DVD, CentOS can't find the DVD package catalogue. It's a reported error for some, XenServer + CentOS6 + DVD install in some hardware configurations = failed install. Yes, I checked the MD5 and let the disc test pass. In every reported case, the netinstall was the solution. The issue is my net access is required to go through a web proxy that prompts before you can download a file. This naturally breaks any download automation. I've been waiting on our IT to put in an exception rule to allow my lab to bypass the prompt, but it's been over 3 weeks now and they don't seem responsive. (I've been working on this a day or two a week) I want to try and host the netinstall files local in my Xen network. Right now I only have a bunch of Windows based VMs, CentOS won't install so I don't have any Linux tools. I had tried simply hosting all the DVD contents off one of the Windows servers using Mongoose. (I didn't want to setup IIS) I copied them to a hosted sub-directory similar to all the mirrors out there (e.g. http:///centos/6.2/os/i386/) with no auth or anything. Then in the netinstall I correctly pointed to it. I now realize just copying the DVD files over won't work. The repodata will point to a local device, not the site I'm hosting. (e.g. the DVD repodata includes xml that points to where the packages are) Clearly I'm hosting them over HTTP, not from a DVD. Is there an easy way to sort this out? I'm just trying to install CentOS6 on Xen. If there's a turnkey downloadable Xen image with CentOS 6.2 on it, or a downloadable repo image, I'll take that too! Thank you in advance!

  Read the article

• Installing a rails plugin from a Git repository

  - by Daniel Beardsley

  I've been trying to install Shoulda script/plugin install git://github.com/thoughtbot/shoulda.git but all I get is: removing: C:/Documents and Settings/Danny/My Documents/Projects/Ruby On Rails/_ProjectName_/vendor/plugins/shoulda/.git > And the vender/plugins directory is empty. I have Rails 2.1.1 installed as a gem and have verified that 2.1.1 is loaded (using a puts inserted into config/boot.rb). Any ideas about what's going on? (this is on a windows box)

  Read the article

• Upgrade using downloaded $40 to Win8 x64 to blank SSD using only retail 32Bit XP install CD

  - by Ron

  Here is my situation. Purchase the downloadable $40 UPGRADE version of Windows 8. Install this upgrade to a new/blank SSD drive WITHOUT prior installation of retail version of XP/service pack 3 (prefered). I have the retail purchased 32Bit XP installation media and I also have a slipstreamed disc that contains service pack 2. This 32bit XP license was installed to a desktop PC that I have NOT used for years (its broke). Questions: Can I upgrade using the $40 download upgrade version from retail 32Bit XP to 64Bit Windows 8 directly to new SSD? without first installing 32bit XP to new SSD? If 32bit XP needs to be installed to perform the upgrade to 64bit Win 8 is service XP service pack 3 still available; likewise, if the boxed retail version of XP 32bit is required to be pre-installed to the new SSD before attempting the downoladed $40 upgrade to 64Bit Win, can a clean install be performed or is a undesired actual upgrade performed? From what I have read this is way to complicated. Ideally, I should be able to install $40 upgrade version Win 64bit directly to new/blank SSD, then during the license verification process enter both the Win8 64Bit upgrade key and retail XP 32bit key (over internet or phone call). Thanks Very Much In Advance for any insight!! Regards, Ron

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• What laptop would be recommended for video-editing or transcoding to blu-ray?

  - by Rob

  I'm looking for a machine (has to be a laptop) reasonably fast enough to handle editing/transcoding/rendering to Blu-ray disc of full true HD 1080p (1920x1080) video from a Samsung R10 camcorder - MPEG4 25fps (not the Sony-Panasonic AVCHD format): To be able to browse through the footage (say, quarter screen is fine for monitoring) and do simple edits - cut out bad bits, add titles, fades, nothing too fancy To be able to burn the footage in 1920x1080p 24p (twenty-four) fps to blu-ray, probably don't mind if I have to leave it for a few hours, or even overnight, as long as its not still running in the morning or takes days. I ALREADY have an external USB 2.0 LG BE06LU10 blu-ray burner. Does quad core make much difference? Or would Dual-core suffice for the above? NVidia because of CUDA for increased speed. What software today can take advantage of this? Which graphics card do I need? So far I've found Dell/Alienware to be well-specified, having a 5yr old Dell laptop that still runs well, albeit slow by today's standards, gives me a good impression. My concerns are too much fan-noise and budget and some Dell Precision Laptops exceed 1500 pounds. Thoughts?

  Read the article

• OpenVPN Keeps Crashing

  - by Frank Thornton

  Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28523 [vpntest] Peer Connection Initiated with [AF_INET]<MY_IP>:28523 Oct 20 21:00:44 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 MULTI_sva: pool returned IPv4=10.8.0.6, IPv6=(Not enabled) Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1576', remote='link-mtu 1376' Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1332' Oct 20 21:00:45 sb1 openvpn[2082]: <MY_IP>:28522 [vpntest2] Peer Connection Initiated with [AF_INET]<MY_IP>:28522 Oct 20 21:00:45 sb1 openvpn[2082]: vpntest2/<MY_IP>:28522 MULTI_sva: pool returned IPv4=10.8.0.10, IPv6=(Not enabled) Oct 20 21:00:46 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 send_push_reply(): safe_cap=940 Client File: client dev tun proto tcp remote <IP> 443 resolv-retry infinite nobind tun-mtu 1500 tun-mtu-extra 32 mssfix 1410 persist-key persist-tun auth-user-pass comp-lzo SERVER: port 443 #- port proto tcp #- protocol dev tun tun-mtu 1500 tun-mtu-extra 32 reneg-sec 0 #mtu-disc yes mssfix 1410 ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem plugin /etc/openvpn/openvpn-auth-pam.so /etc/pam.d/login #plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Comment this line if you are using FreeRADIUS #plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment this line if you are using FreeRADIUS client-to-client client-cert-not-required username-as-common-name server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" keepalive 3 30 comp-lzo persist-key persist-tun What is causing the VPN to keep dropping the connection and then reconnecting?

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  I received a Compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. My plan was to turn this into an Ubuntu Server. It booted up with no problems even with the Ubuntu live disc. After a normal shutdown (not unplugging the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks might be faulty, etc. Thus, I checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower was able to boot into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which I know work perfectly but not with this tower (I recall that it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since I am not using an external Video Card, this is onboard VGA.

  Read the article

• MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

  - by Philipp Keller

  This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >