Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 269/347 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• BSOD Error When Running Windows Phone Emulator

  - by Akshat Mittal

  I am getting a BSOD Error when Running Windows Phone 7.1 Emulator on Windows 7 Ultimate 64bit, Each time I run the Emulator, it Results in Blue Screen. This is a Fresh Install, This Error also Occurred with my last Windows Install (That is why I formatted the Windows Again), I have already Tried to Re-install it, it also shows "Windows Phone Emulator is Doing a Complete OS boot" (Even at Fresh Install, I know it happens when using Unlocked Emulator Images). I am not able to Test any of my app. Please Help !! EDIT: I am not Running a VM, it is on a Physical Machine.

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• Trucrypt or any HDD encryption solution with a bypass?

  - by sorrrydoctorforlove

  Hello experts, in my environment here we have started using trucrypt to encrypt and protect our laptops that are being brought out of the office. The issue comes with the password, we can document the passwords and assign them to users but if they simply use the program to change the password, and then forget it we are in trouble. We backup our data to external locations so it should be fine, but is there any way to install a bypass to be able to boot the laptop or stpo users changing their password (while they have local admin access)? Or should we try another solution? thanks.

  Read the article

• Extending C drive not possible

  - by gokul

  This is my computer partition list. You can see my C drive is running very low on disk space. I wanted to extend my disk space, so I used mmc Disk managment to shrink a volume, but I can't extend it to the C drive because the extended volume in dropdown list of C is not clickable. I've tried many packages, but none were able to do it. My C drive is simple, basic, NTFS, healthy (boot, crash dump, primary partition). The MMC Windows: What should I do?

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• How to fix White Screen of Death after updating iTunes?

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• How do I disable aalert beeps

  - by wheresrhys

  My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I chaneg in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• Supervisor HTTP Server Port Issue.

  - by Catalina

  I have supervisor setup to manage a few processes. It works perfectly fine when I boot my server, however when I stop it and try to start it again it fails and give's me this error msg: * Starting Supervisor daemon manager... Error: Another program is already listening on a port that one of our HTTP servers is configured to use. Shut this program down first before starting supervisord. For help, use /usr/bin/supervisord -h ...fail! I'm running nginx on port 80 and 4 web servers on ports 8000, 8001, 8002, 8003 Does anyone have any idea of what is going on? When I reboot everything works fine.

  Read the article

• OS X Snow Leopard, change file permissions on copy

  - by Francesco K

  I work with OS X, Snow Leopard and need to allow users to make copies of files (templates) located in a read-only repository for subsequent editing. The repository is located on a separate physical drive mounted to the OS X boot volume. As this is a shared computer in a school environment, all users access the machine via a single login ("user_local"). Whether using POSIX permissions or ACLs, the use case requires the file permissions to change from "read" to "read write" as they get copied to the "user_local" home directory. Googling around has not yielded anything that would indicate that this is possible via the Snow Leopard permission system. Question 1: Is this in fact possible via the permission system? If so, how? Question 2: If not possible, how would one go about solving this problem? I imagine this to be a fairly common use case so there must be a workable solution for it out there. Thanks.

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• My PC becomes very slow after changing page file in XP.

  - by Jane

  Hello there, I have 5 partitions in my computer (C, D, E, F, G), and C: is the system partition. Recently I changed the page file setting to use 768-768 MB from the G:, without changing the C: default value (256-512 MB). Everything runs fine until I rebooted my PC. I unset the G:'s page file before I rebooted my PC. Well, after I rebooted my PC, my XP becomes VERY slow. damn slow. I don't know how long I wasted to wait for the boot screen to disappear. (Well, maybe about 1-3 mins. Normally it is under 10 secs) and when I tried to enter the desktop, it just like using a computer without a VGA card, or VGA driver installed. Very slow. Any suggestions to fix this problem? Because I hate to repair-install my XP =\ Thanks.

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Windows 7 safe mode pretends it's Windows XP?

  - by Joachim Kerschbaumer

  Just a question in between. A friend of mine brought me a laptop that does not work anymore and wanted me to check whether I can do something. She told me it's Windows 7, and startup screen and login screen look like it. However, as she gets a bluescreen on startup it is only possible to boot in safe mode where the system pretends to be Windows XP SP3. The system also may have 1 GB of RAM but the system itself states that it has 954 MB of RAM which is a value I've never seen before. Is everything corrupt from operating system to hardware, or am I just a newbie that does not know that Windows 7 pretends to be Windows XP SP3 in safe mode? Or is this laptop just the victim of an illegal, crazy copy of Windows XP sold as Windows 7? Maybe some strange Chinese stuff? I also recognized that the startup screen of Outlook Express reads "Outllok Express" (no typo) I´m kind of confused, maybe someone could put light into this ;)

  Read the article

• Windows 7 disc not recognized by DVD drive

  - by Ed Manet

  My machine is a recent model Systemax, less than 2 years old. It came with Vista 32bit and I bought Windows 7 Home Premium Upgrade for it. When I insert the Windows 7 DVD into the drive, it churns a little but does not recognize the disc. If I double click the DVD drive icon, it prompts me to insert a disc. I tried a different DVD (Office 2007) and the drive recognized the disc. I tried the Windows 7 disc in my Dell laptop and it recognized the disc. So basically, the disc is good and the drive is good, but they don't like each other. I tried to boot to the Windows 7 DVD and the system did not see it. I turned off the Lightscribe service and that didn't help. Does anybody have an idea what's wrong here? Thanks.

  Read the article

• Backup Linux Root Partition (Fedora 12)

  - by SomeNewbie

  I setup my partition scheme to have an extra partition the size of my / partion. I have a separate home directory partition. Essentially, I will be doing things that might make my OS unstable so I'd like to backup the OS state but without bothering my home directory. Can I just backup (maybe with dd?) my root partition to another partition on the HDD? I know to restore it I would have to boot up with a livecd or something and do the reverse procedure. I want this to be as simple and require the least amount of external hardware as possible.

  Read the article

• Will my Lenovo One Key Recovery work if I install Ubuntu on my Ideapad U410?

  - by dostiharise

  I own a Lenovo Ideapad U410. Being a game developer the first thing that I wanted to do is install Ubuntu. But I don't want to lose the Windows 7 that ships with the laptop. So, I wanted to know if the Lenovo One Key Recovery mechanism is capable of restoring the Windows 7, from the hidden recovery partition, after I install Ubunutu and enable Grub boot loader? Note: I am already aware that an alternative would be to create Factory Restore disks, to restore when necessary. But I cannot immediately do it unless I buy an External DVD Burner.

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• How to Shutdown PC by Pressing Power Button

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >