Search Results

Search found 18786 results on 752 pages for 'edit insanely'.

Page 269/752 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Partition disk for dual boot Windows XP and Windows 7 (shared documents)

  - by soupagain

  I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

  Read the article

• iptables syn flood countermeasure

  - by Penegal

  I'm trying to adjust my iptables firewall to increase the security of my server, and I found something a bit problematic here : I have to set INPUT policy to ACCEPT and, in addition, to have a rule saying iptables -I INPUT -i eth0 -j ACCEPT. Here comes my script (launched manually for tests) : #!/bin/sh IPT=/sbin/iptables echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X echo "Defining logging policy for dropped packets" $IPT -N LOGDROP $IPT -A LOGDROP -j LOG -m limit --limit 5/min --log-level debug --log-prefix "iptables rejected: " $IPT -A LOGDROP -j DROP echo "Setting firewall policy" $IPT -P INPUT DROP # Deny all incoming connections $IPT -P OUTPUT ACCEPT # Allow all outgoing connections $IPT -P FORWARD DROP # Deny all forwaring echo "Allowing connections from/to lo and incoming connections from eth0" $IPT -I INPUT -i lo -j ACCEPT $IPT -I OUTPUT -o lo -j ACCEPT #$IPT -I INPUT -i eth0 -j ACCEPT echo "Setting SYN flood countermeasures" $IPT -A INPUT -p tcp -i eth0 --syn -m limit --limit 100/second --limit-burst 200 -j LOGDROP echo "Allowing outgoing traffic corresponding to already initiated connections" $IPT -A OUTPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT echo "Allowing incoming SSH" $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --set --name SSH -j ACCEPT echo "Setting SSH bruteforce attacks countermeasures (deny more than 10 connections every 10 minutes)" $IPT -A INPUT -p tcp --dport 22 -m recent --update --seconds 600 --hitcount 10 --rttl --name SSH -j LOGDROP echo "Allowing incoming traffic for HTTP, SMTP, NTP, PgSQL and SolR" $IPT -A INPUT -p tcp --dport 25 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -i eth0 -j ACCEPT $IPT -A INPUT -p udp --dport 123 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p tcp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT echo "Allowing outgoing traffic for ICMP, SSH, whois, SMTP, DNS, HTTP, PgSQL and SolR" $IPT -A OUTPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 25 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 43 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 80 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 80 -o eth0 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p icmp -j ACCEPT echo "Allowing outgoing FTP backup" $IPT -A OUTPUT -p tcp --dport 20:21 -o eth0 -d 91.121.190.78 -j ACCEPT echo "Dropping and logging everything else" $IPT -A INPUT -s 0/0 -j LOGDROP $IPT -A OUTPUT -j LOGDROP $IPT -A FORWARD -j LOGDROP echo "Firewall loaded." echo "Maintaining new rules for 3 minutes for tests" sleep 180 $IPT -nvL echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X $IPT -P INPUT ACCEPT $IPT -P OUTPUT ACCEPT $IPT -P FORWARD ACCEPT When I launch this script (I only have a SSH access), the shell displays every message up to Maintaining new rules for 3 minutes for tests, the server is unresponsive during the 3 minutes delay and then resume normal operations. The only solution I found until now was to set $IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT, but this configuration does not protect me of any attack, which is a great shame for a firewall. I suspect that the error comes from my script and not from iptables, but I don't understand what's wrong with my script. Could some do-gooder explain me my error, please? EDIT: here comes the result of iptables -nvL with the "accept all input" ($IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT) solution : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1 52 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:8983 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 2 728 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.78 tcp dpts:20:21 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (5 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 EDIT #2 : I modified my script (policy ACCEPT, defining authorized incoming packets then logging and dropping everything else) to write iptables -nvL results to a file and to allow only 10 ICMP requests per second, logging and dropping everything else. The result proved unexpected : while the server was unavailable to SSH connections, even already established, I ping-flooded it from another server, and the ping rate was restricted to 10 requests per second. During this test, I also tried to open new SSH connections, which remained unanswered until the script flushed rules. Here comes the iptables stats written after these tests : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 6 360 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "w00tw00t.at.ISC.SANS." ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: anoticiapb.com.br" ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: www.anoticiapb.com.br" ALGO name bm TO 65535 105 8820 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 10/sec burst 5 830 69720 LOGDROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:8983 16 1684 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 owner UID match 33 0 0 LOGDROP udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 owner UID match 33 116 11136 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.18 tcp dpts:20:21 7 1249 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (11 references) pkts bytes target prot opt in out source destination 35 3156 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 859 73013 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Here comes the log content added during this test : Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55666 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55667 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55668 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55669 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:52 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55670 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:54 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55671 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:58 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55672 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=6 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=7 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=8 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=9 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=59 Mar 28 09:53:00 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=152 Mar 28 09:53:01 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=246 Mar 28 09:53:02 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=339 Mar 28 09:53:03 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=432 Mar 28 09:53:04 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=524 Mar 28 09:53:05 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=617 Mar 28 09:53:06 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=711 Mar 28 09:53:07 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=804 Mar 28 09:53:08 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=897 Mar 28 09:53:16 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61402 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:19 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61403 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:21 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55674 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:53:25 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61404 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55675 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55676 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55677 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:38 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55678 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55679 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5055 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:41 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55680 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:42 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5056 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:45 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55681 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:48 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5057 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 If I correctly interpreted these results, they say that ICMP rules were correctly interpreted by iptables, but SSH rules were not. This does not make any sense... Does somebody understand where my error comes from? EDIT #3 : After some more tests, I found out that commenting the SYN flood countermeasure removes the problem. I continue researches in this way but, meanwhile, if somebody sees my anti SYN flood rule error...

  Read the article

• dedicated server - cgi-sys/defaultwebpage.cgi redirect when accessing via server IP

  - by Ross

  Hi This isn't so much of a problem, but would like to know why this happens. we have a dedicated server running WHM. If I access the server via its IP address directly I am automatically redirected to http://xx.xxx.xx.xxx/cgi-sys/defaultwebpage.cgi I know how to edit this page (this isnt the problem) I'm just curious why I get redirected to this .cgi page, rather than simply remain @ xx.xxx.xx.xxx/ and view my default "landing page", if you like. What setting could I change so that if anyone visits my server IP, they do not get redirected to xx.xxx.xx.xxx/cgi-sys/defaultwebpage.cgi For instance if you visit 173.194.37.104 (google), you view the google home page, but URL remains the same. Hope this makes sense. thanks

  Read the article

• Backing up Windows Server 2008 R2 to FTP server

  - by Adrian Grigore

  Hi, I'm looking for an inexpensive way of backing up my Windows 2008 R2 dedicated server to an FTP server. To be any useful, the software should also be able to restore the server by using a bootable CD and the backup set stored on the FTP server. So Windows server backup seems to be out of the question. Can anyone recommend any suitable products? Preferably some you have actually tried yourself? Thanks, Adrian Edit: Just to clarify, by inexpensive I mean something that costs 250 EUR or less...

  Read the article

• LSI 9211-8i won't boot in KVM

  - by Paul McMillan

  I'm running ubuntu 11.04 with an LSI 9211-8i in IT mode with the latest firmware (10). I'm using KVM with VT-d enabled to pass the entire PCIe device through to the guest OS. I have the device disabled in the system BIOS. When I boot my virtual machine, the adapter quits during bios initialization with the following error: Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 0Ch encountered at adapter PCI(00h,04h,00h) Press any key to continue... I know the virtualization is correctly enabled. I've blacklisted the kernel modules in the host OS. Has anyone else encountered this error? I'm about out of ideas here. Edit: I contacted LSI tech support about this, and they suggested that I try RedHat and Xen. Apparently they don't test or support anything else.

  Read the article

• SFTP jail & Keeping file ownership the same / File owner per folder

  - by Dragonshadow

  I want to setup a jailed SFTP account for a subfolder of another user's home folder, but want the owner of everything in that subfolder to stay the same, including new files and folders uploaded and created by the sftp user, while still allowing access to the files and folders of that subfolder as if the SFTP user was the parent user. rawny bawb-sftp /home/rawny <- rawny owns this /home/rawny/sftp <- rawny owns this too, but bawb-sftp can upload to it, edit files, etc bawb-sftp uploads a file /home/rawny/sftp/lol.txt rawny should still own the file, as if he made it in the first place, even though bawb-sftp was the one that uploaded it. Basically I guess I'm asking for an sftp jail that acts as a highly limited passthrough/puppet for another user?

  Read the article

• Hudson or Jenkins

  - by Lukas Eder

  We have been using Hudson for quite a while and we loved it. Now many Hudson-developers have "left the building" to create their own: Jenkins (which means the project has been forked). As Hudson/Jenkins users, we are now worried whether we should opt for the original "big and stable" producer Oracle, or the "small and dynamic" newcomer Jenkins. EDIT: Our worries are mainly due to the fact that we did not really hear about this fork/split through any official ways. It looks like a guerilla action including the hijacking of logos and trademarks (after all, the copyright must be at Oracle, no? I'm not sure). So we're kinda missing professionalism here, as in well-organised course of action involving press relases, etc. Maybe we just missed that... What are good objective reasons to decide for either project in the future? Can we postpone that decision until later, or is that too risky? Here's one opinion about this: http://www.itworld.com/development/136173/more-concerns-surface-hudson-jenkins-split Why did you choose either one?

  Read the article

• CakePHP: trouble configuring .htaccess for user directories enabled server

  - by bullettime

  I've placed the CakePHP files in a directory in /home/user/public_html/cakephp. When I try to reach localhost/~user/cakephp with my browser, there's an error message. In my case, since I'm using Chrome, it is 'Oops! This link appears to be broken.". Looking for a solution on Google, I found a few articles saying that I have to edit the .htaccess files that came with CakePHP, since it was made to work out of the box in /var/www/htdocs. Apparently I have to add a 'RewriteBase' statement to the .htaccess files. I added 'RewriteBase /' to it but it didn't work. If I change the RewriteBase statement in my user web directory to 'RewriteBase /cakephp' and then try to access localhost/~user/cakephp, the browser then shows not the copy in /home/user/public_html/cakephp but the copy in /var/www/htdocs/cakephp. What can I do to fix this?

  Read the article

• Distributed Development Tools -- (Version control and Project Management)

  - by Macy Abbey

  Hello, I've recently become responsible for choosing which source control and project management software to use for a company that employs me. Currently it uses Jira (project management) and Subversion (version control). I know there are many other options out there -- the ones I know about are all in this article http://mashable.com/2010/07/14/distributed-developer-teams/ . I'm leaning towards recommending they just stay with what they have as it seems workable and any change would have to be worth the cost of switching to say github/basecamp or some other solution. Some details on the team: It's a distributed development shop. Meetings of the whole team in one room are rare. It's currently a very small development team (three developers). The project management software is used by developers and a product manager or two. What are you experiences with version control and project management web applications? Are there any you would recommend and you think are worth the switching cost of time to learn new services / implementing the change? Edit: After educating myself further on the options it appears DVCS offer powerful benefits that may be worth investing in now as opposed to later in the company's lifetime when the switching cost is higher: I'm a Subversion geek, why I should consider or not consider Mercurial or Git or any other DVCS?

  Read the article

• Asus Sonic Master on Asus N53SV

  - by David Winchester

  I have read that there's a problem to get the subwoofer working in these laptops. I tried this solution No sound from external subwoofer but I don't how to prove that the subwoofer is properly functioning. I use Pulseaudio equalizer and the bass sound seems to work fine, but when I go to the Sound Settings, I can't move the bar where it says 'Subwoofer' in my sound card option, so I don't know if everything is alright. If someone has a solution I would like to know, because there isn't much information regarding this. By the way, I'm using Ubuntu 12.04 64 bits. Thanks beforehand, Dave EDIT ----------- Possible Solution Well, I will post a solution that worked for me and I think it will help a lot of users. I finally got the subwoofer working. Besides adding in /etc/modprobe.d/alsa-base.conf the line options snd-hda-intel model=asus-mode4 I deleted the lines with load-module module-combine and module-combine-sink in /etc/pulse/default.pa (in the home folder there's also a ~/.pulse/default.pa file, I don't know if it has the lines too) To assure all the channels are working, I think this command tells me that speaker-test -c6 -l1 -twav I use pulseaudio-equalizer and the bass sounds very well when properly adjusted. Also, all the channels seems to work fine and the sound is even better than in Windows (where I don't have an equalizer). I pointed out before a module-combine and module-combine-sink problem, because one day I turned on my laptop and pulseaudio didn't work. So I deleted the lines with that names (don't know if they came by default, maybe I added them sometime when I was trying to fix my speakers). After all this, I can now move the Subwoofer bar in the Sound configuration. Anyways, the Equalizer does a great job and it improves the sound a lot.

  Read the article

• connecting to redis from wsgi application

  - by W_P

  I am running redis and httpd with mod_wsgi on the same server. I have a wsgi application using a virtualenv and the follow virtualhost conf: WSGIPythonPath /var/www/wsgi <VirtualHost *:80> ServerName test.example.com DocumentRoot /var/www/html WSGIScriptAlias / /var/www/wsgi/myapp/app.wsgi CustomLog logs/test.example.com-access-log common ErrorLog logs/test.example.com-error-log <Directory /var/www/wsgi/myapp> Order allow,deny Allow from all WSGIScriptReloading On </Directory> </VirtualHost> I have a sites.pth in my /var/www/wsgi directory, adding myapp to the PYTHONPATH, and this is my /var/www/wsgi/myapp/app.wsgi: activate_this = '/var/www/envs/myapp/bin/activate_this.py' execfile( activate_this, dict(__file__=activate_this) ) from myapp.application import app as application Sorry, I am trying to edit the question to have the rest of my info by it keeps timing out before the edits go through

  Read the article

• No apache MPM package installed error

  - by Sejanus

  I'm getting "No apache MPM package installed" when trying to configure virtual hosts on apache2.2. I compiled apache2.2 from source and I did not use --with-mpm=NAME option. I thought it will compile with default one then. So the question is, is there any way to check if MPM is installed indeed and I only need to enable it somewhere? If it is not, is there any way to add it without recompiling apache? Or, is there any way to have virtual hosts without it at all? I was doing vhost configuration as per this example. Thanks in advance for your help ;) EDIT: prefork is installed. The question is, why after a2ensite / a2dissite and /etc/init.d/apache2 reload I still get error "No MPM package installed"...

  Read the article

• Windows 7 Office 2007 GPO install

  - by Scott

  I have a GPO that works fine for installing Office 2007 Pro Plus on Vista and XP but when it installs Office on Windows 7 somehow the office key does not get entered via the customized msp, and needs to be entered manually. Has anyone else run into this? Any suggestions for a fix? Its defeats the purpose of remote unattended install if I then have to run around entering the stupid key. edit: I am sorry I should have specified I also have the config.xml file customized already. I have it set to display level none, completion no, suppress modal to yes accept eula to yes, the key put in and the company name and the username variable (%USERNAME%).

  Read the article

• OSX: The item XYZ.txt~ can’t be moved to the Trash because it can’t be deleted

  - by dsg

  I'm trying to delete a file under OSX Lion, but can't. I get the following message: The item XYZ.txt~ can’t be moved to the Trash because it can’t be deleted. Here's what I've tried: select file and press COMMAND + DELETE (I get the message above.) renaming the file in finder (There is no option to rename the file.) sudo ls -a in a terminal (The file does not appear.) sudo rm XYZ.txt~ (I get "No such file or directory".) How do I remove this file? EDIT The file went away after restarting. My guess is that it was a glitch in finder.

  Read the article

• Silverlight Cream for November 21, 2011 -- #1171

  - by Dave Campbell

  In this Issue: Colin Eberhardt, Sumit Dutta, Morten Nielsen, Jesse Liberty, Jeff Blankenburg(-2-), Brian Noyes, and Tony Champion. Above the Fold: Silverlight: "PV Basics : Client-side Collections" Tony Champion WP7: "Pushpin Clustering with the Windows Phone 7 Bing Map control" Colin Eberhardt Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up From SilverlightCream.com: Pushpin Clustering with the Windows Phone 7 Bing Map control Colin Eberhardt is back discussing Pushpins for a BingMaps app on WP7 and provides a utility class that clusters pushpins, allowing you to render 1000s of pins on an app ... all the explanation and all the code Part 22 - Windows Phone 7 - Tile Push Notification Part 22 in Sumit Dutta's WP7 series is about Tile Push Notification... nice tutorial with all the code listed Correctly displaying your current location Morten Nielsen demonstrates formatting the information from the GPS on your WP7 into something intelligible and useful Spiking the Pomodoro Timer Jesse Liberty put up a quick and dirty version of a Pomodoro timer for WP7.1 to explore the technical challenges of the Full Stack Phase 2 he's cranking up 31 Days of Mango | Day #11: Network Jeff Blankenburg's Number 10 in his 31 Days quest of WP7.1 is about the NetworkInformation namespace which gives you all sorts of info on the user's device network connection availability, type, etc. 31 Days of Mango | Day #11: Live Tiles Jeff Blankenburg takes off on Live Tiles for Day 11... big topic for a 1 day post, but he takes off on it... updating and Live Tiles too Working with Prism 4 Part 2: MVVM Basics and Commands Brian Noyes has part 2 of his Prism/MVVM series up at SilverlightShow... very nice tutorial on the basics of getting a view and viewmodel up, and setting up an ICommand to launch an Edit View... plus the code to peruse. PV Basics : Client-side Collections Tony Champion is startig a series on Silverlight 5 and Pivot Viewer... First up is some basics in dealing with the control in SL5 and talking about Client-side Collections... great informative tutorial and all the code Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Install Glibc2 using Yum

  - by Nerrve

  I'm trying to install glibc2 version 2.11 that's needed for openoffice 3.4 https://issues.apache.org/ooo/show_bug.cgi?id=119393 but i can't seem to find the dependency with yum. I already have the following dependencies installed. glibc.i686 2.5-49.el5_5.7 installed glibc.x86_64 2.5-49.el5_5.7 installed glibc-common.x86_64 2.5-49.el5_5.7 installed glibc-devel.x86_64 2.5-49.el5_5.7 installed glibc-headers.x86_64 2.5-49.el5_5.7 installed libc-client.x86_64 2004g-2.2.1 installed and glibc.i686 2.5-81.el5_8.2 updates glibc.x86_64 2.5-81.el5_8.2 updates glibc-common.x86_64 2.5-81.el5_8.2 updates glibc-devel.i386 2.5-81.el5_8.2 updates glibc-devel.x86_64 2.5-81.el5_8.2 updates glibc-headers.x86_64 2.5-81.el5_8.2 updates glibc-utils.x86_64 2.5-81.el5_8.2 updates I ran the following to get the version but it shows something different [root@***** /]# ./lib64/libc.so.6 GNU C Library stable release version 2.5, by Roland McGrath et al. Can someone please help? Thanks! EDIT : I'm using CentOS 2.6.18-128.1.10.el5

  Read the article

• Editing true type fonts

  - by Parsa

  In typical Persian fonts which are True Type, there is a historical problem with yeh and kafs. These fonts are created for Windows 98, which didn't include full Persian support, and now, we have 2 kind of Kafs: Keheh(0x6a9, ?), and Arabic Kaf(0x643, ?), and 2 kind of Yehs: Farsi Yeh(0x6cc, ?), and Arabic Yeh(0x64a, ?). Old fonts use Arabic ones, but the standard keyboard for Persian uses the Persian ones of course. Is it possible to edit and fix these fonts? I've made many attempts to replace these characters with FontLab Studio, which I failed. Any suggestions?

  Read the article

• Recover a lost IBM DS4300 SAN password?

  - by Daniel

  I have a pair of IBM DS4300 SAN units that I need to perform a firmware upgrade on. Unfortunately the admin passwords on these units have been lost and now need to be reset. I had hoped the default password of 'infiniti' would work but it seems that it must have been changed. I know the method here is to contact IBM but the cost of that phone call is ludicrous if someone out here knows what they're going to tell me to do. These units are out of warranty and the cost of support is beyond what we have the budget for. Is there an interrupt I can enter during the boot process (similar to a cisco password recovery) or is there a hardware/software tool I require? Please, if anyone has ever gone through the process of an IBM password recovery I’m asking for a little help. EDIT: Just to clarify, the password I need to reset is the one used for serial cable access and not for storage manager. Sorry if I have caused more confusion.

  Read the article

• Must partprobe before using drive?

  - by Jeff Welling

  This is a followup question to Cannot mount /dev/sdc1 on Debian 5.0, special device /dev/sdc1 doesn't exist Basically, I have 6 SATA hard drives in a machine and I'm trying to create a RAID6 array with them. When I try to run the mdadm command to create (with the verbose option) a raid array, I see messages like "mdadm: super1.x cannot open /dev/sdf1: No such device or address" which are resolved by doing partprobe /dev/sdf and then re-running the mdadm command. The problem is that I have to run partprobe after each reboot, and from experience I don't think this is normal behaviour -- on no other linux machine do I have to partprobe the device before I can use it. Something must be going wrong, but how do I troubleshoot this to find out what? Could this be caused by a hardware problem? Edit: Additional note - before I seemed to only have this problem with one drive, but now I'm having it with 3 drives.

  Read the article

• DNSCurve vs DNSSEC

  - by Bill Gray

  Can someone informed, please give a lengthy reply about the differences and advantages/disadvantages of both approaches? I am not a DNS expert, not a programmer. I have a decent basic understanding of DNS, and enough knowledge to understand how things like the kaminsky bug work. From what I understand, DNSCurve has stronger encryption, is far simpler to setup, and an altogether better solution. DNSSEC is needlessly complicated and uses breakable encryption, however it provides end to end security, something DNSCurve does not. However, many of the articles I have read have seemed to indicate that end to end security is of little use or makes no difference. So which is true? Which is the better solution, or what are the disadvantages/advantages of each? edit: I would appreciate if someone could explain what is gained by encrypting the message contents, when the goal is authentication rather than confidentiality. The proof that keys are 1024bit RSA keys is here.

  Read the article

• Best distro for eee-pc [closed]

  - by a_m0d

  Possible Duplicate: A minimal Linux distribution for my ASUS EEE PC I am looking at buying an Asus eee PC and would like some input from the community on the different distros / OS's out there for it. I have heard that the Xandros distro that comes with the net-book isn't that great (lack of software, etc.), but I wonder what all the SuperUsers out there think. Please answer with one distro / OS per answer, and list (at least some of) the advantages and disadvantages of your choice. EDIT: To clarify, the version I am looking at is the 701 SSD, with the 8GB hard drive.

  Read the article

• Apache VirtualHosts define php.ini but extend main php.ini

  - by Hosh Sadiq

  I have a main php.ini file and am wondering if it is possible to specify a custom php.ini for a virtualhost, but this php.ini would extend the main php.ini file, so that only the specified settings are overridden and everything else is taken the main php.ini. For example: I have my main php.ini file in /etc/php5/php.ini, containing all the defaults. Let's say this has everything as default so e.g. allow_url_fopen = On allow_url_include = Off Then I have my virtualhost located at /home/user/php.ini and this contains the following: allow_url_fopen = Off This php would run with first the php.ini in /etc/php5/php.ini then the settings that are in /home/user/php.ini resulting in a configuration where both allow_url_fopen and allow_url_include are set to Off. Edit: Also, if /home/user/php.ini does not exist, it would default back to /etc/php5/php.ini

  Read the article

• Setting CATALINA_OPTS for tomcat6 on windows doesn’t work.

  - by Ben

  (I've copied this from Stack Overflow here, after someone suggested I post the question here) Hi, I'm trying to setup Tomcat6 to work with JMX on Windows Vista 64. To do that I need to pass the parameters below to Tomcat6. What I do in command prompt. (that doesn't work) set CATALINA_OPTS="-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=9898 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false" tomcat6.exe What I do that does work (but causes other problems) java -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=9898 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -jar bootstrap.jar It seems as if tomcat is just ignoring the environment variable CATALINA_OPTS. Am I doing something wrong? I've also tried to edit catalina.bat and define the variable CATALINA_OPTS there. No success. (tried adding the parameters to JAVA_OPTS too, no success either) Thanks in Advance!!

  Read the article

• Rosetta Stone Network V3 doesn't recognize built-in microphone in OSX Lion

  - by zarose

  I am using Rosetta Stone Network V3 on an early 2011 MacBook Pro running OSX Lion 10.7.3. When I log in, select a language and level, and then a lesson, I am prompted to select a microphone. The built in microphone doesn't show up, yet I've used it multiple times for other applications. I heard from another user that it doesn't work if headphones with a built-in microphone are used. I have not yet tried a USB microphone. Is there some free work around to this? I would prefer to not have to buy a USB microphone, but if that is the only solution, then I'll live. Edit: I noticed that Rosetta Stone tells me that if I don't have a microphone I should disable speech to move on, but that option is grayed out for me.

  Read the article

• Sound card / microphone impedance mismatch

  - by axk

  First of all I'm not completely sure this is impedance mismatch, but from what I found on the Internet I believe it is. It seems to be a common problem. The question is not as much about solving the problem as about why it is happening (if I'm right about the cause of the problem, of course). I had this quiet microphone problem with several built in cards and microphones and now with a Creative Audigy SE. There's a microphone boost option which introduces a lot of noise with volume increase, but even this doesn't seem to give loud enough sound in some cases. The mic on my current headphones is very quiet with Audigy SE without the boost but is very loud and low noise with an external Sound Blaster Connect. So the question is have I just been unlucky with my sound cards and microphones or is it a common problem? And if it is a common problem why is it so difficult for the vendors to standardize on the sound card / microphone impedance? Edit: the OS is Windows (XP/7), but I don't believe it is OS-specific.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >