Search Results

Search found 8252 results on 331 pages for 'live mesh'.

Page 269/331 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Remote reboot of windows to knoppix

  - by user64452

  I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

  Read the article

• Windows 8 Windows Store (Metro/ModernUI) applications not working (just show 'busy' animation or white screen)

  - by davidm_uk

  I have a Dell XPS 15 which shipped with Windows 7 x64, which I recently upgraded to Windows 8. The process went surprisingly smoothly (given that this was an upgrade, not a complete re-install), and the system generally seems very stable. However, today I noticed that several of the Windows Store apps don't work: they all behave in the same way, launching but then showing a spinning 'wait' animation indefinitely. This is affecting the standard Microsoft Mail, Store, Weather, News, Travel, Finance, Sport, Games and Music apps. The Bing app just shows a Bing logo on a coloured background (but no wait animation). The Calendar, Photos and SkyDrive apps open but then show a white screen. The Maps and Camera apps work without problems. The live tiles on the Start screen are updating correctly, for example the Mail app's tile shows a summary of new mail despite the Mail app's problems. All of these applications were working correctly a few days ago. I'm sure I've used several without problems since the last Windows update occurred on 7th November. Any suggestions on what might have happened and/or how to fix it would be very welcome. I don't need these Windows Store applications, but the fact that they're not working is irritating me.

  Read the article

• Repairing Windows 7 boot after Ubuntu 10.10 install

  - by Ted

  I've read various threads on this after googling, including one on this site. I had Windows 7 installed on an SSD. I wanted to try Ubuntu so I created a partition for it on the SSD and booted with the live CD to install Ubuntu. Went through the install and somehow Ubuntu carved out another partition on the SSD rather than using the one I had already created. Windows 7 would then not boot but Ubuntu would. I booted with my 7 cd and ran the automatic startup repair, it didn't find any problems. I then ran the bootsect command on the drive with 7. It said it repaired the bootmgr but Windows still would not boot and now Ubuntu won't either. I read somewhere else that it may be due to the partition that 7 was on being changed during the install. I don't care about the Ubuntu installation but I don't want to lose the 7 install, can I delete the ubuntu partition through booting with the 7 cd? Will that do any good? Thank you all! I'm stumped even though I've done startup repairs before, just not after Ubuntu install.

  Read the article

• Many clients on a wireless AP for UDP broadcast packets

  - by distorteddisco

  I asked this question on StackOverflow and was directed over here, so I'd appreciate any advice. I'm deploying a smartphone application as part of a live music performance that depends on receiving UDP broadcast packets from a wireless access point. I'm guessing that between 20 and 50 clients will be connected at any one time. I'm aware that a maximum of 20 clients per access point is advised, but as the UDP broadcast packets are ground through the LAN, how would I be able to link multiple APs together? I'm looking for recommendations on a suitable AP for this. The actual data transmission rates are very low - only a few kB/s - as I'm just sending small messages to the smartphone apps, and there will be no WAN internet connection. I tried it with a few connected peers on an adhoc wireless connection without any problems, but ran into dropped packet issues on an old WRT54G running ddwrt, though it's in pretty rough shape. What's the best way to do this? I suppose I could limit concurrent wireless connections to 20 clients... but more would be nice. EDIT: I should also say that it's purely one-way communication; the smartphone application is only receiving broadcast packets, not sending anything.

  Read the article

• Hyper-V vss-writer not making current copies [migrated]

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• Something like Dropbox for local use

  - by Casper

  I am looking for a solution to sync folder pairs between a NAS and multiple local macs. Each of the macs could edit files and the other macs should then get synced automatically. Basically my own local version of Dropbox without using "cloud-storage". I have looked into solutions using rsync. As I understand it rsync is not really capable of doing a bi-directional sync. I also do not want to necessarily invoke the sync process. I would prefer a daemon running in the background - waiting and checking for changes and then syncing them "live". The program should also be flexible enough to recognize that it sometimes (in the case with laptops) can not reach the NAS. It should then just wait for the connection to be back again, without bugging me ever few minutes. I have looked into synk, folderwatch, rsync and a few others, but I haven't really found a solution. Isn't there something like "offline folders" from microsoft for the mac? Thanks PS: just for clarification - I don't want to sync for backup purposes, instead I am wanting to sync so that all macs have a local copy of the most recent changes to files.

  Read the article

• Fake demostration software for command line

  - by Joe

  I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

  Read the article

• Puppet: variable overriding best practices

  - by rvs

  I'm wondering what are best practices for overriding variables in puppet. I'd like to have all my nodes (which located in different places, some of them are qa, some live) with same classes. Now I have something like this: class base_linux { <...> # something which requires $env and $relayhost variables } class linux_live { $relayhost="1.1.1.1" $env = "prod" include base_linux } class linux_qa { $relayhost="2.2.2.2" # override relayhost include base_linux } class linux_trunk { $env = "trunk" # override env inlude linux_qa } node "trunk01" { include linux_trunk include <something else> } node "trunk02" { $relayhost = "3.3.3.3" # override relayhost include linux_trunk include <something else> } node "prod01" { include linux_prod } So, I'd like to have some defaults in base_linux, which can be overrided by linux_qa/linux_live, which can be overrided in higher level classes and node definition. Of course, it does not work (and not expected to work). It does not work with class inheritance as well. Probably, I'll be able to archive using global scope variables, but it does not seems like a good idea to me. What is the best way to solve this problem?

  Read the article

• postfix email gateway

  - by k-h

  I am setting up a postfix email gateway. It will not hold any mail but will accept email for my domain and forward it to another internal mailserver and relay mail out from the internal server. One of the main problems is that I am working on a live running system and this will be an upgrade so I am using a test domain which I will change at some point to the real domain. I tried various methods but found the simplest way (that worked) was to use a script to create an aliases file (from ldap entries). There are various problems with this method. The main one being that the entries can't be of the simple form [email protected] because the gateway doesn't know where to send them. They have to be of the form: [email protected]. What I would like doesn't seem hard but I can't get my head around the postfix documentation. There seem to be various ways but none of them seem to work. Most of the examples I have found on the web assume the mail is going to end up on the server. I want a list of users somewhere, preferably of the form: user1, user2, etc rather than [email protected] (I can easily generate this list) and I would like postfix to forward all email to example.com to a particular server: ie realmailserver.example.com. Can anyone suggest clues as to how I might do this?

  Read the article

• Workaround for Dell "Power Supply Not Recognised" issue

  - by Haedrian

  So, I have a Dell Inspirion and the power supply port appears to be damaged. Basically when I plug it in I get a nice popup telling me that it couldn't detect that its a Dell power supply so it won't charge the battery and underclocks the system. It still works for other purposes (that is, giving power) I thought it was the actual power supply cable so I bought a new one, that worked for a while, provided I inserted it at JUST THE RIGHT angle. But now that's not working anymore, so I assume its the part which connects to the computer. The battery charging I can live without, the underclocking I can't. I'd like a way around this issue. Things I've tried: Updating the BIOS Replacing the power supply cable Inserting it at different angles Turning it off and on again Swearing at it Twisting it while inserting it So, is there a workaround somehow? I'd like to avoid taking out my soldering kit and risking permanently damaging expensive equipment if that's allright. I'm hoping for a software solution. Added: The exact model is a Del Inspirion N5010

  Read the article

• Fedora 19 no longer bootable

  - by Parisa

  I had fedora dual-booted with windows on my laptop for a while but with windows refresh grub was gone and my system directly booted windows. I booted fedora with my systems boot options and with this tutorial: https://fedoraproject.org/wiki/GRUB_2 I reinstalled grub2 but then had my system booted into an empty grub prompt: grub So I found the drive containing vmlinuz and initramfs (completely sure about thair location and versions) and tried to manually boot it but after the boot command it said: no suitable video mode found booting in blind mode and nothing happened. Such a tragedy... I have already tried to use live disks rescue system. Funny but troubleshooting options don't apear on my laptop while they do on my desktop pc. I cant even go to boot prompt on my lenovo idepad z400 laptop. I also tried EasyBCD so maybe I could boot it with windows but it comes up with this error: missing AutoNeoGrub().mbr Now I have removed the grub prompt (don't know why) and its really hard for me to reinstall my dearly customized fedora. If anyone knows a way to help boot it again or reinstall it keeping my files and installations I really need it. Thanks PS:I have already tried Boot-repair Disk but it asks me to enable the repo containing grub-efi on my fedora to reinstall the grub2 and fix the boot for me (how could i?).

  Read the article

• Logging Remote Desktop to Servers via Logon Script or GPO or What?

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• Does Google sometimes ignore "special" characters, possibly depending on your location or font type settings? [closed]

  - by RLH

  TLDR Google tends to ignore special characters in my search strings. Is there anything that I can do about it and is it, possibly, happening because Google makes certain assumptions based off of my default text-encoding settings and my location? I just posted this question over at StackOverflow. I had found a C preprocessor that I'd never seen before. As I should have done, I Googled it and tried to find out further information. I attempted various search terms which were all variations of "C Operator ##" (some times with and some times without the double-quotes.) Google didn't bring back anything of use so I posted my question on SO. As you can see from the comments, someone mentioned a search string (ironically one which I did try to search) and stated that I could have even hit the "I'm feeling lucky" button and have gotten my answer. The problem is I did search that, and the results that I received were far more basic and even after following the top results and searching the resulting pages, I could find nothing referencing the string "##". I'm not posting this question to complain but it does provide an empirical example of something I've seen before that really bugs me-- Google often ignores special characters in my search strings and the results are often useless. As a developer I often need to search for string values containing non-alphanumeric characters. Some characters (like the underscore or hyphen) can be used without trouble. However, other characters (such as the ampersand, carat, tilde and pound sign) are often ignored in my query strings. Is there a way to prevent this from happening so that I can get meaningful results from Google? NOTE I stay logged into Google and I live in the US. I wonder if Google detects some form of text-encoding setting or derives my results based off of certain, localized text-based assumptions. Regardless, I would like to for Google to search for what I give it. Is there anything that I can do to improve my results?

  Read the article

• Internet compression proxy for low speed broadband?

  - by user23150

  I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

• XBMC remote control key repeat

  - by Amigable Clark Kant

  Those who have used XBMC with a WiFi remote, such as an Android or iOS device with the official XBMC remotes, have probably seen this at one time or another: your remote stops working, when you press a key, that key is repeated very fast. Sometimes you can break the key repeat loop by pressing that same key again. Sometimes (as this particular morning) you can not. This problem has existed for literally years (it even occurs on the old XBOX only builds) but there seems to be no definite explanation as to what is causing it. I am asking for a workaround. (If you Google, you can find threads were people are ridiculed for bringing up this problem, which is one reason I ask here instead of on the official forums. Also the fact that this problem has persisted for so many years.) I am running, right now, XBMCBuntu Live Eden and the latest official iOS remote. Although, I have seen this problem on all combinations of remotes and XBMC versions I have tried over the years, which are many. (XBMC on Windows, Linux, OSX, remotes on Android and iOS.) Link to bug #136 for the Android remote. It's marked as "fixed" as of client version 636, but the problem is seen again in rev 730. Go figure. There is something fundamentally wrong with how keypresses are sent from the various remotes to XBMC, since this problem is seen across time, XBMC versions and iOS/Android.

  Read the article

• Can I split one ethernet line coming out of my wall into multiple separate lines?

  - by Burteçin 'Turk' Sapta

  Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

  Read the article

• How to backup virtual machines on a standalone ESXi host?

  - by Massimo

  Standalone ESXi (4.1) host without any vCenter Server. How to backup virtual machines as quickly and storage-friendly as possible? I know I can access the ESXi console and use the standard Unix cp command, but this has the downfall of copying the whole VMDK files, not only their actually used space; so, for a 30-GB VMDK of which only 1 GB is used, the backup would take 30 full GBs of space, and time accordingly. And yes, I know about thin-provisioned virtual disks, but they tend to behave very badly when physically copied, and/or to blow up to their full provisioned size; also, they are not recommended for actual VM performance. It is ok for me to shut down the VMs before backing them up (i.e. I don't need "live" backups); but I need a way to copy them around efficiently; and yes, a way to automate shutdown/startup when taking a backup would also help. I only have ESXi; no Service Console, no vCenter Server... what's the best way to handle this task? Also, what about restores?

  Read the article

• is there a way to run a command before puppet implements a change?

  - by Patrick

  I want to have puppet run a specific command before performing any type of change. I am aware of the prerun_command option in the main puppet.conf, but this is not what I'm looking for. I want the command to only run if something is about to change, not on every puppet run. Here's the scenario. Let's say I have a bunch of web servers behind a load balancer. I then want puppet to update the web site files. But in order to prevent issues where some files have been updated, but other files haven't, and the mixed versions causing problems, I want to take the server out of the load balancer pool. I could write a script which when run will tell the load balancer to remove the box from the pool. Then puppet can do the change, and use postrun_command to put the box back in the pool once complete. But I need a way to run that script to remove the server from the pool. The only solution I can think of is to keep 2 copies of the files on the box. One a staging copy, and when puppet updates that, use a notify action to trigger the removal script, and then copy from staging into the live location. But I was hoping for something a little more generic that would work on any change being performed (upgrading a package, restarting a service, creating a user, anything).

  Read the article

• visually documenting web server configuration and infrastructure

  - by Alex Ciarlillo

  I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

  Read the article

• Tried to install Mint to a Flash Drive. Now I can't boot from the main hard disk.

  - by Dan

  Hello, all. I'm kind of new to Linux and I need some help. I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt: error: no such device: (some long hex val) grub rescue> However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation, but, again, I'm kind of new to Linux, so I'm not sure exactly why. Any help is greatly appreciated.

  Read the article

• Putting and configuring grub on an external drive

  - by HisDudeness

  I want to put a bunch of minor emergency operating systems (such as GParted Live, DSL, Puppy Linux and so on) on a partitioned USB pen drive, with a dedicated grub boot loader on it, which I want to start when I select the drive in the BIOS to boot. The problem is: when writing grub boot options I must tell where kernel and initial ram files are located, but the USB drive can have different letters depending on when I did plug it in, if some others external drive were mounted. So, how can I write appropriate options which automatically refer to the drive grub is installed on without having to specify absolute paths, which might change (I mean, like (hd1,msdos1) ot /dev/sdb1)? And, while we are at it, can I have grub working on a device without an operating system on it to which it can refer? I mean, I want to address the command sudo grub-install /dev/sdb from the LMDE system I'm on right now, but I won't have LMDE on my pen drive. Is that a problem? And installing grub on another device, will I keep the grub I have right now on my HDD?

  Read the article

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• Failed Software RAID0 on Linux - Attempting to recover data

  - by Gizmo_the_Great

  I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >