Search Results

Search found 8815 results on 353 pages for 'major upgrade'.

Page 269/353 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

  • High load average, low CPU and IO (Centos 5.7)

    - by Ben
    A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

    Read the article

  • mdadm+zfs vs mdadm+lvm

    - by Alex
    This may be a naive question since I'm new to this and I cannot find any results about mdadm+zfs, but after some testing it seems it might work: The use case is a server with RAID6 for some data that is backed-up somewhat infrequently. I think I'm well served by any of ZFS or RAID6. Platform is Linux. Performance is secondary. So the two setups I am considering are: A RAID6 array plus regular LVM and ext4 A RAID6 array plus ZFS (without redundancy). Is this second option that I don't see discussed at all. Why ZFS+RAID6? It's mainly because the inability of ZFS to grow a raidz2 with new disks. You can replace disks with larger ones, I know, but not add another disk. You can accomplish 2-disk redundancy and ZFS disk growth using mdadm as the redundancy layer. Besides that main point (otherwise I could go directly to raidz2 without RAID under it), these are the pros-cons that I see for each option: ZFS has snapshots without preallocated space. LVM requires preallocation (might be no longer true). ZFS has checksumming (very interested in this) and compression (nice bonus). LVM has online filesystem growth (ZFS can do it offline with export/mdadm --grow/import). LVM has encryption (ZFS-on-Linux has not). This is the only major con of this combo I see. I guess I could go RAID6+LVM+ZFS... seems too heavy, or not? So, to close with a proper question: 1) Is there anything that inherently discourages or precludes RAID6+ZFS? Anyone has experience with a setup like this? 2) Are there possibilities for checksumming and compression that would make ZFS unnecessary (maintaining the possibility of filesystem growth)? Because the RAID6+LVM combo seems the sanctioned, tested way.

    Read the article

  • How to verify PostgreSQL 9 has installed correctly on a CentOS server?

    - by A4J
    I'm trying to install the PG (postgres) gem on a CentoOS server, but it keeps saying Postgres is too old, even though I have upgraded it to 9.1.3 (as per the instructions here http://www.davidghedini.com/pg/entry/install_postgresql_9_on_centos). I am using CentOS 5.8 (and Ruby 1.9.3) Here is the error message: Building native extensions. This could take a while... ERROR: Error installing pg: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... no Your PostgreSQL is too old. Either install an older version of this gem or upgrade your database. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. psql --version confirms my version: psql (PostgreSQL) 9.1.3 I can confirm packages installed: Setting up Install Process Package postgresql91-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-devel-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-server-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-libs-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-contrib-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Nothing to do Any ideas on how to troubleshoot this? Thanks in advance.

    Read the article

  • ATI radeon graphics card and screen freeze problem

    - by Thomas
    recently i upgrade my machine with new hardware component. my mother board is Gigabyte, processor Intel i3 3.6 ghz, ram 4 gb, graphics card ATI radeon 4350 1 GB. my OS installed is windows XP. when i am trying to play call of duty black ops then screen gets freeze and when i try to play other game like medal of honour then suddenly game closed suddenly after 15 or 20 minutes. i am not being able to find out the problem. whether i have problem in RAM or Graphics card. i asked few hardware person and one of them told me that i should installed windows 7 rather than windows xp. is it true. please help me to understand the problem and also tell me what should i do to fix this problem. please discuss in detail. thanks in advance. Update: yes i already install lates driver for ATI radeon 4350 but still the problem persist. do i need to install windows 7 instead of win xp because my processor is intel i3.

    Read the article

  • Problem recreating BCD on Windows 7 64bit - The requested system device cannot be found

    - by Domchi
    NVIDIA drivers upgrade crashed my Windows 7 installation, so I'm working to undo the damage. What I can do: I can boot Windows install from the USB drive, and I can boot the Hiren's Boot CD. Although automated Windows repair fails, I can get to command prompt when I boot Windows install from USB drive, and I can see my drive and all my data. What I cannot do: I cannot boot into Windows - I get this message: Windows failed to start. A recent hardwware or software change might be the cause. To fix the problem: 1.insert windos cd and run a repair your computer option. File: /boot/bcd Status: 0xc000000f Info: an error occured while attempting to read the boot configuration data. It seems that something is wrong with my /Boot/BCD, so I'm trying to recreate it from scratch. I've tried all the methods detailed here (including Windows repair which fails), and I'm left with the last one (near the bottom of that page). When I type the following command as in the tutorial: bcdedit.exe /import c:\boot\bcd.temp ...it fails with the following error: The store import operation has failed. The requested system device cannot be found. Many Google results say that I must use diskpart to set my partition active, however it's already set as active. Also, when I try this: bcdedit /enum It fails with similar message: The boot configuration data store could not be opened. The requested system device cannot be found. Does anyone know what does that error message mean, and what is the requested system device? I'd like to avoid having to reinstall Windows since all the files on disk seem to be fine.

    Read the article

  • Outlook 2007 / 2010 Calendar: hide meetings in specific category

    - by Jeroen
    Question Is there any easy way in Outlook 2007/2010 to show/hide meetings in a specific category? Preferably only for a specific view (the Month view, in this case). Note: I was almost done writing this question, adding just one more "What I've tried" option, when I found an acceptable (though imperfect) solution. Remembering this SE blog post I figured I might as well post it after all and answer it myself. And who knows, perhaps someone else has a more elegant solution. The reason for me personally is that I'd like to hide the "small, recurring meetings" like our daily stand-up meeting in the month view. I'd prefer an Outlook feature that is meant for this (there must be one for this, right?), but I'm open to workarounds or plugin suggestions as well. What I expected to find somewhere was a list of categories (with added option "No category") where you could select/deselect from which categories you'd see meetings. Something like this mock-up: What I've tried Edit "View Settings", and use a "Filter..." on categories. This has several disadvantages, the major one is that the filter only allows me to choose what I want to show, but not what I want to hide. Even if I tick all categories but one for the filter it would still hide any uncategorized meeting. Similar to 1, but then using Advanced filters. Still a bit clumsy as changing views can be up to three clicks, but this is the best solution so far (see the corresponding answer below). Creating a sub-calendar for these "small" meetings that I wish to hide. This felt a bit clumsy and like overkill, but did provide an easy "select/deselect" option to show/hide these meetings. Search for plug-ins that do this. Couldn't find one (yet).

    Read the article

  • Automatically check for Security Updates on CentOS or Scientific Linux?

    - by Stefan Lasiewski
    We have machines running RedHat-based distros such as CentOS or Scientific Linux. We want the systems to automatically notify us if there are any known vulnerabilities to the installed packages. FreeBSD does this with the ports-mgmt/portaudit port. RedHat provides yum-plugin-security, which can check for vulnerabilities by their Bugzilla ID, CVE ID or advisory ID. In addition, Fedora recently started to support yum-plugin-security. I believe this was added in Fedora 16. Scientific Linux 6 did not support yum-plugin-security as of late 2011. It does ship with /etc/cron.daily/yum-autoupdate, which updates RPMs daily. I don't think this handles Security Updates only, however. CentOS does not support yum-plugin-security. I monitor the CentOS and Scientific Linux mailinglists for updates, but this is tedious and I want something which can be automated. For those of us who maintain CentOS and SL systems, are there any tools which can: Automatically (Progamatically, via cron) inform us if there are known vulnerabilities with my current RPMs. Optionally, automatically install the minimum upgrade required to address a security vulnerability, which would probably be yum update-minimal --security on the commandline? I have considered using yum-plugin-changelog to print out the changelog for each package, and then parse the output for certain strings. Are there any tools which do this already?

    Read the article

  • Server and Network Lag

    - by DanSpd
    At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

    Read the article

  • Server and Network Lag

    - by DanSpd
    At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

    Read the article

  • Server and Network Lag

    - by DanSpd
    At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

    Read the article

  • ATI gpu (video accel, decode, encode, ATI Stream, DXVA)

    - by Shiki
    Okay its a long question title for sure. I'm looking for a new video card (yes,SU is not a page for that, but wait). I've been a loyal NVidia customer ever since, now using a 8600gts. Old but still somewhat good, its a bit slow though. I want an upgrade because 8600gts wont support better vdpau and new features. I checked out the prices and the documents, I would need a GTX260 card. Which costs ..well.. a lot. ATI performs much better for that price. (At least on every test it outperforms GTX260). However, as far as I know there is no gpu accel with ATI. The things you can use is DXVA only, no other method. Could you correct me out there? Will be there a gpu accel for ATI also? Or is there one available? (DXVA is not bad, but kinda slow compared to NVIdia's CUDA.) What about openCL? How does ATI support that? (I'm talking about the 5850 ATI card at the minute, I would buy that instead of the NVidia.)

    Read the article

  • MySQL socket connections working, but not port connections

    - by Neil
    I installed MySQL community 5.1.45 on my Snow Leopard 10.6, using the pkg from their site. I had previously installed a MySQL binary from entropy.ch. In the previous installation, the connections were working fine before I upgrade to Snow Leopard. In Snow Leopard, both the installations are problematic. Using an app called Sequel Pro, if I connect with the socket operation, it connects properly. However, a standard connection with the same credentials doesn't work. From what I've understood, socket connections happen on the machine itself between processes, whereas normal connections occur over the network/ports, in this case a loopback to my machine, since the server and client are both on the same machine. My new CakePHP installation isn't being able to connect to the db with the root credentials I provided. Btw, I've been starting the MySQL server using the Preference Pane. When I tried running mysqld from terminal, it gave me: 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test mysqld: Can't change dir to '/usr/local/mysql-5.1.45-osx10.6-x86_64/data/' (Errcode: 13) 100323 1:54:37 [ERROR] Aborting 100323 1:54:37 [Note] mysqld: Shutdown complete mbp is the name of my machine. How do I fix this so that my webserver can connect to the mysql server?

    Read the article

  • Resize Debian in VirtualBox

    - by Poni
    I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

    Read the article

  • Can reprepro accept a new version of a package into the repository?

    - by kai
    I have installed a package into my own debian package repository like so: $ sudo reprepro -b /var/packages/ubuntu includedeb maverick my-package_0.8-0_all.deb my-package_0.8-0_all.deb: component guessed as 'main' Exporting indices... I have installed my package on a few machines using apt-get install. I have now added new features to my software and would like to add a new minor version of my package to the repository so that I may update my machines using apt-get upgrade. I try to do this like so: $ sudo reprepro -b /var/packages/ubuntu includedeb maverick my-package_0.9-0_all.deb my-package_0.9-0_all.deb: component guessed as 'main' Skipping inclusion of 'my-package' '1.0-0' in 'maverick|main|i386', as it has already '1.0-0'. Skipping inclusion of 'my-package' '1.0-0' in 'maverick|main|amd64', as it has already '1.0-0'. It looks like I need to tell reprepro that this is a new version of the same package but I have no idea how to do this. I have read the reprepro man page several times and searched on the net for a couple of hours but I have not found any answers. Am I missing something? Many thanks.

    Read the article

  • Running mod_php and suPHP same time

    - by BHare
    I recently went from Debian Lenny with 5.2.x and was able to use mod_php for any php files that were not located in /home/ and suPHP for all the php files that were located in /home/. I did this because I needed a default php.ini (given me all features of php) for my websites in /var/www/ and I didn't want to have to change the owner of all the .php files from root. I also had a default php.ini for all the /home/ php files without dangerous features. This was I had setup: <IfModule mod_suphp.c> <Directory /home/> AddType application/x-httpd-php .php .php3 .php4 .php5 suPHP_AddHandler application/x-httpd-php suPHP_Engine on suPHP_ConfigPath /home/shared/ </Directory> </IfModule> This was working perfect, but recently I upgraded to PHP to 5.3.5 from dotdeb (Lenny has no official php 5.3) . This had weird issues on lenny such as not display errors correctly and little tid bits. So I decided to upgrade from lenny to squeeze. Uninstalled php (along with it came suphp) and reinstalled with the new source. I now have 5.3.3-7 with Debian Squeeze but I cannot get mod_php and suPHP to run at the same time anymore. mod_php will always work and there are no errors in apache2 or suphp logs. If I disabled mod_php then suPHP will work. Is there thing I am doing wrong?

    Read the article

  • Computer specs for a large database

    - by SpeksETC
    What sort of computer specs (CPU, RAM, disk speed) should I use for running queries on a database of 200+ million records? The queries are for a research project, so there is only one "user" and only one query will be running at a time. I tried it on my own laptop with SQL Server with an i3 processor, 2GB RAM, 5400 RPM disk and a simple query didn't finish even after 8+ hours. I have an option to connect a SSD via eSata and upgrade to 4GB RAM, but not sure if this will be enough... Thanks! Edit: The database is about 25 GB and the indexes are not setup properly. When I tried to add an index, I let it run for about 8 hours and it still hadn't finished so I gave up. Should I have more patience :)? In general, the queries will run once in a while and its ok even if it takes a couple hours to complete.... Also, the queries will produce probably about 10 million records which I need to process using Stata/Matlab and I'm concerned that my current laptop is not strong enough, but unsure of the bottleneck....

    Read the article

  • Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

    - by Jeff
    I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

    Read the article

  • TicTac Photo and Windows 7

    - by Ben
    Hello, My wife has been creating a tictac photo album. I had to upgrade to windows 7 as i had enough of Vista so i backed up the tic tac photo file and the photos to an external hard disk and performed a fresh install of win7. Now here is the problem. TicTacPhoto says it can find the photos in the album. The locations were as follows: Vista: C:\Users\Kelly\Pictures Win 7 C:\Users\Kelly\My Pictures When i try to create a Pictures folder under Kelly it popups a message about merging the two folders and simply moves the pictures to the My Pictures folder. Does anyone know a way to make a foler called pictures so i can eliminate the file path problem and then try again with tic tac photo support to get them to fix my file. My wife is going to kill me as its our wedding album and she has spent upwards of 30hrs designing it and me upgrading to win 7 means its all my fault. She does not understand file paths etc. Im going to try and open the album file in a text editor and see if i can see anything but thought i would ask here as well. Any help appreciated.

    Read the article

  • PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded

    - by Tiny
    I'm trying to upgrade php 5.4.14 from php 5.4.3 in wamp server 2.2e. I have downloaded php-5.4.14-Win32-VC9-x86 (thread safe). Extracted it under C:\wamp\bin\php. Copied wampserver.conf from C:\wamp\bin\php\php5.4.3 to C:\wamp\bin\php\php5.4.14. Renamed php.ini-development to phpForApache.ini. -The port number the wamp server has been changed in the http.conf file to 8087 from its default 80. This is mentioned here though it is about upgrading from php 5.3.5 to php 5.4.0. After this, Restarting of the wamp server and services all over again has all been done and those two versions appeared in the menu php-versions (which is opened when the icon of the server is clicked). But when I attempt to enable a library like php_mysql or php_mysqli, a warning message box appears. PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded. I have also tried to removing the semicolon before them in the php.ini file but to no avail. I'm running Microsoft Windows XP Professional Version 2002, service pack 3. Where might be the problem? EDIT: I have changed extension_dir from C:\php to c:\wamp\bin\php\php5.4.14\ext\ in php.ini as the answer below indicates and the library is now loaded correctly but it says, 1045 - Access denied for user 'root'@'localhost' (using password: YES) though the user name and the password are the same as they are in MySQL in the config.inc.php file under phpmyadmin. I have also tried to restart MySQL56 service from Control Panel-Services(Local) but it keeps giving the same error. Does someone know why this happens?

    Read the article

  • What are the advantages and disadvantages of the various virtual machine image formats?

    - by Matt
    Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

    Read the article

  • Python easy_install confused on Mac OS X

    - by slf
    environment info: $ echo $PATH /opt/local/bin:/opt/local/sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin:/opt/local/bin:/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:~/.utility_scripts $ which easy_install /usr/bin/easy_install specifically, let's try the simplejson module (I know it's the same thing as import json in 2.6, but that isn't the point) $ sudo easy_install simplejson Searching for simplejson Reading http://pypi.python.org/simple/simplejson/ Reading http://undefined.org/python/#simplejson Best match: simplejson 2.1.0 Downloading http://pypi.python.org/packages/source/s/simplejson/simplejson-2.1.0.tar.gz#md5=3ea565fd1216462162c6929b264cf365 Processing simplejson-2.1.0.tar.gz Running simplejson-2.1.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-Ojv_yS/simplejson-2.1.0/egg-dist-tmp-AypFWa The required version of setuptools (>=0.6c11) is not available, and can't be installed while this script is running. Please install a more recent version first, using 'easy_install -U setuptools'. (Currently using setuptools 0.6c9 (/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python)) error: Setup script exited with 2 ok, so I'll update setuptools... $ sudo easy_install -U setuptools Searching for setuptools Reading http://pypi.python.org/simple/setuptools/ Best match: setuptools 0.6c11 Processing setuptools-0.6c11-py2.6.egg setuptools 0.6c11 is already the active version in easy-install.pth Installing easy_install script to /usr/local/bin Installing easy_install-2.6 script to /usr/local/bin Using /Library/Python/2.6/site-packages/setuptools-0.6c11-py2.6.egg Processing dependencies for setuptools Finished processing dependencies for setuptools I'm not going to speculate, but this could have been caused by any number of environment changes like the Leopard - Snow Leopard upgrade, MacPorts or Fink updates, or multiple Google App Engine updates.

    Read the article

  • iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

    - by Sergey
    I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

    Read the article

  • Permission denied when running Rails app in VirtualBox Ubuntu guest with files on Windows host

    - by Ola Tuvesson
    I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared (Samba) from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents. But when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file) - why is that? Are there any major conceptual flaws with this approach? Would I be better off using the VBox "shared folders" function?

    Read the article

  • ERROR with rpm_check_debug vs depsolve

    - by Frank Thornton
    Transaction Summary ========================================================================================================================================================== Install 9 Package(s) Upgrade 227 Package(s) Remove 1 Package(s) Total size: 252 M Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libasound.so.2()(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 libasound.so.2(ALSA_0.9)(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 ** Found 15 pre-existing rpmdb problem(s), 'yum check' output follows: alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of alsa-lib = ('0', '1.0.22', '3.el6') alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc8)(64bit) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2()(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2()(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2013-12-23-22-364infzT.yumtx root@www1 [~]# I did some research and this is due to a 32bit binary trying to install itself or broken repo? root@www1 [~]# yum repolist Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * extras: mirror.ash.fastserv.com * updates: ftp.usf.edu repo id repo name status base CentOS-6 - Base 6,284+83 dag Dag RPM Repository for Red Hat Enterprise Linux 4,559+91 extras CentOS-6 - Extras 14 updates CentOS-6 - Updates 247+39 repolist: 11,104 Now I disabled epel and rpmforge repops and still ended up with the same issues. Ideas?

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >