Search Results

Search found 60998 results on 2440 pages for 'techie help'.

Page 270/2440 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

  • Problem with sound driver

    - by JiminP
    I had problem that sound had lag in Flash. (Other than that, there was no problem.) On the internet, I found that installing OSS4 might help me. So I installed OSS4, but there was some problems (no sound on Flash, and couldn't use function key on the laptop - which is quite annoying), so I try to remove OSS4 and re-installing sound modules. After some mess-up, the whole sound was gone. I used Ubuntu for a year, but I don't know how to use the terminal well (All I know is basic commands like sudo, ls, or apt-get).. Now I'm trying to recover by following instructions at this page, but I have some problems... :( When I try to follow instructions: sudo aplay -l finds no sound drivers. find /lib/modules/'uname -r' | grep snd (backtick changed to ' due to code markup) returns nothing. When I try to do sudo apt-get install linux-restricted-modules-'uname -r' linux-generic, it says that it can't find linux-restricted-modules-3.0.0-13-generic package. lspci -v | grep -A7 -i "audio" returns this, which doesn't contain anything about the name of the driver. Writing sudo modprobe sn and pressing tab twice only returns sudo modprobe sn9c102. sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-'uname -r' linux-ubuntu-modules-'uname -r' libasound2 returns this, and didn't change non of above. sudo apt-get install linux-alsa-driver-modules-$(uname -r) fails because it can't find the package linux-alsa-driver-modules-3.0.0-13-generic. Compiling ALSA driver doesn't work. When I try to make, it says that /lib/modules/3.0.0-13-generic/build/include/linux/modversions.h doesn't exist. I'm using Ubuntu 11.10. Can anyone help me? I can re-install Ubuntu, but I don't want to....

    Read the article

  • text extraction from video game dialogue files [on hold]

    - by wdwvt1
    As part of an academic project, I am trying to access the dialogue files (whether audio or text) from a variety of sports video games (Madden or NBA 2kX would be fantastic). I have searched extensively on other sites (scholarly text-mining publications, r/gaming, r/madden, modding sites, etc.) for guidance in how to extract dialogue files, but have been unsuccessful. Given that I don't have even the domain specific language to ask the right question (i.e. the resources I am seeking are out there, I just can't find them) I am asking the SE game dev community for help with the 2 following questions: Is there a canonical resource that I should study that would get me started with how to extract text or audio files from games? I am very fluent in python, which usually excels at mining information from sources, but I struggle with knowing where to start with a video game (as opposed to a more familiar database with a defined API). Is this even feasible, or are protections included with newer games (e.g. NBA 2k13) going to make extraction of these resources in a programmatic way impossible? Thank you for your help!

    Read the article

  • Compiled code spreadsheet-like cell management? (auto-updating)

    - by proGrammar
    Okay so I am fully aware how spreadsheets manage cells, they build dependency graphs where when one cell changes it tells all the other cells that are dependent on it that it changed. So they can from there update. How they update I think involves either re-evaluating the formulas stored as strings, or re-evaluating the abstract syntax tree which I think is stored differently and might be faster. Something like that. What I'm looking to do is manage a few variables in my code so I don't have to update them in the correct way, which would be a nightmare. But I also want it much faster than spreadsheets. And since I'm not looking for any functionality as great as are in these spreadsheets, I just figured from that thought point that there has to be a way to have a very fast implementation of this functionality. Especially since I don't have to modify cells after compiling unless that would be an option. I'm very new to programming so I have no idea. One example might be to have a code-generator that generates code that does this for me. But I have no clue what the generated code would look like. Specifically, how exactly would variables inform others that they need to update, and what do those variables do to update? I'm looking for any kind of ideas. Programming is not my job but nonetheless I was hoping to have some kind of system like this that would greatly help me with some stuff. Of course I have been programming plenty lately so I can still program. I just don't have the full scope on things. I'm looking for any kind of ideas, thank you very much in advance! Also, please help me with the tags. I know C# and Java mainly and I'm hoping to implement this in either of those languages and I'm hoping this can stay in those tags. Forcing this into some kind of spreadsheet tag wouldn't be accurate.

    Read the article

  • Do you know about the Visual Studio 2010 Architecture Guidance?

    - by Martin Hinshelwood
    If you have not seen the Visual Studio 2010 Architectural Guidance from the Visual Studio ALM Rangers then you are missing out. I have been spelunking the TFS Guidance recently and I discovered the Visual Studio 2010 Architectural Guidance. This is not an in-depth look at the capabilities of the architectural tools that shipped with Visual Studio 2010 Ultimate, but is instead a set of samples that lead you by example through real world scenarios. There is practical guidance and checklists to help guide lead developers and architects through the common challenges in understanding both existing and new applications. The content concentrates on practical guidance for Visual Studio 2010 Ultimate and is focused on modelling tools. There is integration into Visual Studio so all you need to do to access it is select “Architecture | Visual Studio ALM Rangers – Architecture Guidance”. Figure: Accessing the Architecture guidance is easy This brings up an inline version of the documentation and a kind of Explorer that lets you pick the tasks you want to perform and takes you strait to that part of the Guidance. Figure: Access the Guidance from right within Visual Studio 2010 This is a big help when you just want to figure out how to do something and can’t be bothered searching for and through the content in the provided Word documents. The Question and Answer section is full of useful content and there are six Hands-On-Labs to sink your teeth into: Creating extensions with the feature extension Explore an Existing System Scenario Extensibility Layer Diagrams New Solution Scenario Reusable Architecture Scenario Validation an Architecture Scenario I’m sold! Where can i get my hands on this fantastic content? Download the Visual Studio 2010 Architecture Tooling Guidance and if you like it don’t forget to add a review to make the team that put it together in their spare time feel all the mere loved.

    Read the article

  • PASS Business Intelligence Virtual Chapter Upcoming Sessions (November 2013)

    - by Sergio Govoni
    Let me point out the upcoming live events, dedicated to Business Intelligence with SQL Server, that PASS Business Intelligence Virtual Chapter has scheduled for November 2013. The "Accidental Business Intelligence Project Manager"Date: Thursday 7th November - 8:00 PM GMT / 3:00 PM EST / Noon PSTSpeaker: Jen StirrupURL: https://attendee.gotowebinar.com/register/5018337449405969666 You've watched the Apprentice with Donald Trump and Lord Alan Sugar. You know that the Project Manager is usually the one gets firedYou've heard that Business Intelligence projects are prone to failureYou know that a quick Bing search for "why do Business Intelligence projects fail?" produces a search result of 25 million hits!Despite all this… you're now Business Intelligence Project Manager – now what do you do?In this session, Jen will provide a "sparks from the anvil" series of steps and working practices in Business Intelligence Project Management. What about waterfall vs agile? What is a Gantt chart anyway? Is Microsoft Project your friend or a problematic aspect of being a BI PM? Jen will give you some ideas and insights that will help you set your BI project right: assess priorities, avoid conflict, empower the BI team and generally deliver the Business Intelligence project successfully! Dimensional Modelling Design Patterns: Beyond BasicsDate: Tuesday 12th November - Noon AEDT / 1:00 AM GMT / Monday 11th November 5:00 PM PSTSpeaker: Jason Horner, Josh Fennessy and friendsURL: https://attendee.gotowebinar.com/register/852881628115426561 This session will provide a deeper dive into the art of dimensional modeling. We will look at the different types of fact tables and dimension tables, how and when to use them. We will also some approaches to creating rich hierarchies that make reporting a snap. This session promises to be very interactive and engaging, bring your toughest Dimensional Modeling quandaries. Data Vault Data Warehouse ArchitectureDate: Tuesday 19th November - 4:00 PM PST / 7 PM EST / Wednesday 20th November 11:00 PM AEDTSpeaker: Jeff Renz and Leslie WeedURL: https://attendee.gotowebinar.com/register/1571569707028142849 Data vault is a compelling architecture for an enterprise data warehouse using SQL Server 2012. A well designed data vault data warehouse facilitates fast, efficient and maintainable data integration across business systems. In this session Leslie and I will review the basics about enterprise data warehouse design, introduce you to the data vault architecture and discuss how you can leverage new features of SQL Server 2012 help make your data warehouse solution provide maximum value to your users. 

    Read the article

  • How different is WPF from ASP.NET [closed]

    - by Tom
    I have been quickly moved over to a different project at work because the project needs more help. I was chosen because they are confident in my abilities and they thought I would be best fit for the next couple weeks to help finish the application out. I am a little nervous. I do tend to pick things up quickly. I was moved to a different project at the beginning of this year and now I know it like the back of my hand. Previously I was on another project. Both of these projects were an ASP.NET web application, which I believe is considered a winforms web application? The project I am moving to is a desktop WPF application. I have read that many people enjoy developing their applications with WPF. I just have never dealt/worked with WPF before. I like to consider myself pretty good at ASP.NET/C# and I do a solid job. We deal with a lot of data processing from the database and report generation. So I do get to experience C# more so than some web applications where the C# end of it is mostly just event driven and simple instructions. How different are the two? Will it be completely foreign to me? Or is it just a different way of looking at a problem and I can familiarize myself quickly? Thanks for the input.

    Read the article

  • does ubuntu 11.10 is support ns2.29

    - by nasser
    I need your help, I'm a beginner on NS2 , and I'm trying to install ns2.29 on ubuntu 11.10 32bits but i can't. This message appear and installation stopped : Build tcl8.4.11 ============================================================ loading cache ./config.cache checking whether to use symlinks for manpages... no checking whether to compress the manpages... no checking whether to add a package name suffix for the manpages... no checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for building with threads... no (default) checking if the compiler understands -pipe... yes checking how to run the C preprocessor... gcc -pipe -E checking for sin... no checking for main in -lieee... yes checking for main in -linet... no checking for net/errno.h... no checking for connect... yes checking for gethostbyname... yes checking how to build libraries... static checking for ranlib... ranlib checking if 64bit support is requested... no checking if 64bit Sparc VIS support is requested... no checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string tcl8.3.2 configuration failed! Exiting ... Tcl is not part of the ns project. Please see www.Scriptics.com to see if they have a fix for your platform. Anyone can help me?

    Read the article

  • Calculating a child Position, Rotation and Scale values?

    - by Sergio Plascencia
    I am making my own game editor(just for fun) anyway I have problem that I had several days trying to resolve but I have been unsuccessful. Here goes... I have an object "A": Position: (3,3,3), Rotation: (45,10,0), Scale(1,2,2.5) And an object "B": Position: (1,1,1), Rotation: (10,34,18), Scale(1.5,2,1) I now make a parent/child relationship. "B" is a child of "A": A |--B When I do the relationship I need to re-calculate the Child("B") Position, Rotation and Scale such that it maintains its current position, rotation and scale(Location in world). So for child position "B" it would now be (-2, -2, -2) since now "A" it is center and (-2, -2, -2) will keep the object in its same position. I think I got the Position and scale figure out, but rotation I cant. So I was trying to figure out what to do and what I did is opened Unity and run the same example and I did noticed that when making an abject a child object the child object did not moved at all but had its Position, Rotation and Scale values changed(Related to the parent). For example: Unity (Parent Object "A"): Position: (0,0,0) Rotation: (45,10,0) Scale: (1,1,1) Unity (Child Object "B"): Position: (0,0,0) Rotation: (0,0,0) Scale: (1,1,1) When making it a parent child relation("B" is a child of "A") the child object("B") in its Rotation values now has: X: -44.13605 Y: -14.00195 Z: 9.851074 If I plug the same values to my editor(To the child "B" rotation X, Y, Z values) the object does not move at all. So I basically need to know how did Unity arrive at those rotation values for the child(What are the calculations?). If you can help and put all the equations for the Position, Rotation or Scale then I can double check I am doing it correctly but with the Rotation I really need help. Thanks!

    Read the article

  • How do you properly organize a commercial game?

    - by Reactorcore
    For the past months I've been studying programming and I've finally learned how to code, but one thing that is confusing me is how to properly organize the design of a game project - code wise. The game I'm building is a pretty standard commercial game. It has the basic components of a normal game: A world, characters and items interacting with each other and all of this is run by game manager. Basically you play as a hero in a world and do stuff. Fight, explore and interact. Think of your standard adventure game that starts off with an intro, goes to the menu system, then gets into the game and back to the menu. Pretty much like 99% of any commercial game or otherwise serious game projects. Thats what I'm aiming at. The problem is: How do you properly code a commercial game architecture? How do you organize it? How do you make it not become unmaintainable spaghetti code? What specific things to keep in mind when building this, codewise? How you can help me: a) Please tell how do you code your own game projects. What is your thought-process when designing the architecture? b) Recommend books, blogs, tutorials, videos or anything else on how to organize a commercial video game. c) Give hints and tips on do's/don'ts when building a game, codewise. Please help!

    Read the article

  • 3D Vector "End Point" Calculation for procedural Vector Graphics

    - by FrostFlame64
    Alright, So I need some help with some Vector Math. I've developing some game Engines that have Procedural Fractal Generation for Some Graphics, such as using Lindenmayer Systems for generating Trees and Plants. L-Systems, are drawn by using Turtle Graphics, which is a form of Vector graphics. I first created a system to draw in 2D Graphics, which works perfectly fine. But now I want to make a 3D equivalent, and I’ve run into an issue. For my 2D Version, I created a Method for quickly determining the “End Point” of a Vector-like movement. Given a starting point (X, Y), a direction (between 0 and 360 degrees), and a distance, the end point is calculated by these formulas: newX = startX + distance * Sin((PI * direction) / 180) newY = startY + distance * Cos((PI * direction) / 180) Now I need something Similarly Equivalent for performing this Calculation in 3D, But I haven’t been able to Google anything that could show me how to do this. I'm flexible enough to get whatever required information is needed for this method calculation, in any reasonable form (Vector3, Quaternion, ect). To summarize: Given a starting point/vector position in 3D space (X, Y, Z), a Direction in 3D space (Vector3, Quaternion, ect), and a Distance, I need to find the “End Point” in 3D Space. Thank you for your time and help.

    Read the article

  • Asus N46VZ prouduces more heat when on ubuntu compared to windows

    - by Blaze Tama
    First, i just used ubuntu as my main operating system, so please bear with me. My Asus N46VZ temps is pretty high when im on ubuntu (13.10). The temps are 60C even though i just open a browser. This does not happened on windows, where the temps is just around 50C. I did some research and some people said that the problem might be on my graphic card. I have an intel HD 4000 and GT 650m. So i tried to check my system settings and it said im using "Intel® Ivybridge Mobile". So, i tried to check the "additional drivers" tab on software & update settings but i found nothing there. The point is, i still dont know what make my laptop "overheating". The VGA part is just my guess (and is still dont understand what is the correlation between my VGA and the heat, and everything except the temp seems fine). Any help is appreciated. Thanks for your help :D

    Read the article

  • Ubuntu 11.10 power management does not recognize removal of power supply!

    - by sema
    I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

    Read the article

  • GlassFish Extension for Oracle JDeveloper

    - by Shay Shmeltzer
    We just release a new version of Oracle JDeveloper - 11.1.2.3. One new feature here is built-in support for GlassFish. This include the ability to create an "application server" connection to GlassFish and then deploy to that server with one click from inside JDeveloper. You can use this for deploying Oracle ADF Essentials application on Glassfish, but you can also use it to deploy any Java EE application you build in JDeveloper on GlassFish. However, if you are planning to work with GlassFish and JDeveloper on a more regular basis as your development server, then you might find my new extension useful. The new extension allows you to start and stop an external GlassFish instance, as well as start it in debug mode (which will allow JDeveloper to remotely debug your application as it runs on the server. I also added a button that will invoke the web admin console of Glassfish. Here is a quick demo that will show you how to work with the extension: The extension is available from help->check for updates, or you can download it directly from here, and then use help->check for updates pointing to the local zip file.

    Read the article

  • Suddely internet is not accessible

    - by user189708
    I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

    Read the article

  • Blank screen after GRUB (64 bit) - cannot install Ubuntu

    - by peGGi
    My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

    Read the article

  • Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

    - by Sky
    When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

    Read the article

  • Proof Identify stolen computer getting computer identification info from Launchpad bugs and comparing

    - by Kangarooo
    I sold my old laptop to neighbours and it was stolen from them. Well i think i have found thief so i want to check his computer id and compare it to my old Launchpad bugs id. How in Launchpad i can find from my bugs: Motherboard HDD Somthing else that can help identify it Maybe how to recover or find some overwritten files (couse now there is windows) I found in Launchpad one my bugs has LSPCI autogenerated from bug 682846 https://launchpadlibrarian.net/70611231/Lspci.txt but i dont see any id that can be used to identify specificly my comp. This can be used to identify many same models. Or i missed something in there? And what commands should i use to get all identification on that comp in one go fast? Just lspci? How to get same lspci as it is in that Launchpad link? Now testing laspci on my computer i dont get so much info. Also im now doing a search in my external hdd where i have many backups and maybe i have there result from lspci. So what containing keywords would help doing search with for small lspci and full reports ive done? I might have done sudo lshw somefilename

    Read the article

  • CodePlex Daily Summary for Wednesday, June 12, 2013

    CodePlex Daily Summary for Wednesday, June 12, 2013Popular ReleasesWeb Pages CMS: 0.5.0.5: Added empty media directoryWindows 8 App Desing Reference Template: Education Big Picture: EducationBigPicture: Download includes the following -> Source (C# and JS) -> Package -> Snapshots -> DocumentationModern UI for WPF: Modern UI 1.0.4: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extension includes the ModernUI.WPF NuGet package. DownloadToolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.11): XrmToolbox improvement Add exception handling when loading plugins Updated information panel for displaying two lines of text Tools improvementMetadata Document Generator (v1.2013.6.10)New tool Web Resources Manager (v1.2013.6.11)Retrieve list of unused web resources Retrieve web resources from a solution All tools listAccess Checker (v1.2013.2.5) Attribute Bulk Updater (v1.2013.1.17) FetchXml Tester (v1.2013.3.4) Iconator (v1.2013.1.17) Metadata Document Generator (v1.2013.6.10) Privilege...Document.Editor: 2013.23: What's new for Document.Editor 2013.23: New Insert Emoticon support Improved Format support Minor Bug Fix's, improvements and speed upsChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.4 for VS2012: V2.4 - Release Date 6/10/2013 Items addressed in this 2.4 release Updated MSBuild Community Tasks reference to 1.4.0.61 Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesLayered Architecture Sample for .NET: Leave Sample - June 2013 (for .NET 4.5): Thank You for downloading Layered Architecture Sample. Please read the accompanying README.txt file for setup and installation instructions. This is the first set of a series of revised samples that will be released to illustrate the layered architecture design pattern. This version is only supported on Visual Studio 2012. This samples illustrates the use of ASP.NET Web Forms, ASP.NET Model Binding, Windows Communications Foundation (WCF), Windows Workflow Foundation (WF) and Microsoft Ente...Papercut: Papercut 2013-6-10: Feature: Shows From, To, Date and Subject of Email. Feature: Async UI and loading spinner. Enhancement: Improved speed when loading large attachments. Enhancement: Decoupled SMTP server into secondary assembly. Enhancement: Upgraded to .NET v4. Fix: Messages lost when received very fast. Fix: Email encoding issues on display/Automatically detect message Encoding Installation Note:Installation is copy and paste. Incoming messages are written to the start-up directory of Papercut. If you do n...SFDL.NET: SFDL.NET v1.1.0.4: Changelog: Ciritical Bug Fixed : Downloading of Files not possibleMapWinGIS ActiveX Map and GIS Component: MapWinGIS v4.8.8 Release Candidate - 32 Bit: This is the first release candidate of MapWinGIS. Please test it thoroughly.MapWindow 4: MapWindow GIS v4.8.8 - Release Candidate - 32Bit: Download the release notes here: http://svn.mapwindow.org/svnroot/MapWindow4Dev/Bin/MapWindowNotes.rtfLINQ to Twitter: LINQ to Twitter v2.1.06: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.VR Player: VR Player 0.3 ALPHA: New plugin system with individual folders TrackIR support Maya and 3ds max formats support Dual screen support Mono layouts (left and right) Cylinder height parameter Barel effect factor parameter Razer hydra filter parameter VRPN bug fixes UI improvements Performances improvements Stabilization and logging with Log4Net New default values base on users feedback CTRL key to open menuSimCityPak: SimCityPak 0.1.0.8: SimCityPak 0.1.0.8 New features: Import BMP color palettes for vehicles Import RASTER file (uncompressed 8.8.8.8 DDS files) View different channels of RASTER files or preview of all layers combined Find text in javascripts TGA viewer Ground textures added to lot editor Many additional identified instances and propertiesWsus Package Publisher: Release v1.2.1306.09: Add more verifications on certificate validation. WPP will not let user to try publishing an update until the certificate is valid. Add certificate expiration date on the 'About' form. Filter Approbation to avoid a user to try to approve an update for uninstallation when the update do not support uninstallation. Add the server and console version on the 'About' form. WPP will not let user to publish an update until the server and console are not at the same level. WPP do not let user ...AJAX Control Toolkit: June 2013 Release: AJAX Control Toolkit Release Notes - June 2013 Release Version 7.0607June 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...Rawr: Rawr 5.2.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...VG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesJson.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Biller: Biller 1.49: This release fixes company sales statisticsNew Projectsapiviewer: Documentation viewer for your service API.ArgusLib: Set of libraries I use in most of my projects.arwani: this is armani project.Blue Mercs Data Gateway: The Data Gateway is an open source project which simplifies coding fluently database SQL statements, stored procedure, connections and transactions.Convert Hashtable Rows into DataTable Columns in C#: Simplest way to convert a Hashtable into a DataTable with all the Hashtable rows converted into DataTable columns.everynet: EveryNet is an internet service provider servicing homes Fraktalysator: Software to visualize fractals such as the Mandelbrot Set. Still in early development state.Free BarCode API for .NET: Freee BarCode API for .NETGraphic filters in WPF: FiltersGrid Plugin: Grid Plugin , Turn your <table> into a fully functional price grid.mediamonitor: this is mediamonitor project.MyCodingStuffs: This solution includes C#, WCF, MVC4.0, ASP.net libraries.OpenErp .Net Connector: Access to OpenErp from .NetPhong and Flat shading: Phong shadingPixel Replacer: The Pixel Replacer is a simple library for replacing pixel colors with a new color, by setting a filter rule.plainetl in vb.net: a one db to another db transform, threaded, commandline tool, ... initially created to get a flat-File db (FoxPro) into a mssql.Programming in HTML5 with JavaScript and CSS3: Contains material developed while visiting a Microsoft course for the MCSD exam 70-480ProjectLinker2012: This tool helps to automatically create and maintain links from a source project to a target project to share code that is common to Silverlight and WPF.SALDERA Project: SALDERA TEST Project Summary Mire lesz ez jó? Majd Kiderül.TCPMessageServer: Simple TCP Client/Server used to pass an object between client and serverThats-Me Dot Net API: Thats-Me Dot Net API is a library which implements the Thats-Me.ch API for the Dot Net Framework.T-Sql Code Documentor: Document T-SQL Code and Extract Comments for all objects in a database.Windows 8 App Design Reference Template: Measurement: Measurement template will help if you want to build an app which addresses Mass/Weight, Distance/Length, Capacity/Volume etc. measurement placeholders.Windows 8 App Design Reference Template: Weather Clock: Weather Clock Template will help if you want to build an app which has the features to add Current/Previous day temperatures and add cities for coverage. Windows 8 App Desing Reference Template: Education Big Picture: Education Big Picture Template will help if you want to build an app which has an option for showcasing campus details, courses, student life etc dataWinodws 8 App Design Reference Template: Social Feed: Social Feed template will help if you want to build an app which has the Messaging, Facebook, twitter feeds sections. WP7FlacPlayer: Implemented JFlacLib in C# A simple player to play flac in windows phone system

    Read the article

  • What is Stackify?

    - by Matt Watson
    You have developers, applications, and servers. Stackify makes sure that they are all working efficiently. Our mission is to give developers the integrated tools they need to better troubleshoot and monitor the applications they create and the servers that they run on. Traditional IT operations tools are designed for network and system administrators. Developers commonly spend 30% of their time working with IT Operations remediating application service problems. Developers currently lack tools to efficiently support the applications they create. Stackify delivers the application support functionality that developers need:View application deployment locations, versions, and historyBrowse files on servers to ensure proper deploymentsAccess configuration and log files on serversRemotely restart windows services, scheduled tasks, and web applicationsBasic server monitoring and alertsCollects all application exceptions to a centralized pointLog and report on custom applications eventsStackify is building an integrated DevOps solution delivered from the cloud designed to meet the needs of developers but also help unify the working relationship with IT operations teams and existing security roles. Our goal is to help unify the interaction between developers and IT operations. Stackify allows both teams to have visibility that they never had before  to solve complex application service issues easier and faster. Stackify’s CEO and CTO both have experience managing very large and high growth software development teams. That experience is driving our design in Stackify to deliver the integrated tools we always wished we had, the next generation of development operations tools.

    Read the article

  • What is the safest way to remove a swap partition?

    - by user212062
    I am running Ubuntu 12.04 on a 64-bit HP laptop with a 16 GB flash drive. I do not have a working hard drive right now. When I installed Ubuntu, I created a 2 GB swap partition on sdb1. I have since learned that swap partitions are generally a bad idea on flash drives, so I would like to use my swap space for my other partitions. You can see my partition scheme in the link below. I have read that I just have to comment sdb1 out of the fstab file, boot from a GParted live CD, select swapoff for sdb1, delete/merge with other partition, and everything's good. But, I've also read that messing with sdb1 can change the UUID of sdb2 or sdb3 and cause problems. Is this true? Does initramfs use swap at all? Also, when I get Ubuntu running on my laptop with an internal hard drive, does the swap partition help that much? I have 6 GB of DDR3. Does the rule of 1.5xActual RAM still apply? It seems like quite a bit to me. Thanks for the help! UPDATE: I have removed swap. The process I followed is: Right click swap partition in GParted and selected swapoff. Used # to comment the swap partition out of fstab. I tried to boot from a live GParted CD, but I kept getting an error, so I ran GParted in Ubuntu. Deleted swap partition in GParted. Unmounted /windows. Expanded /windows to take the remaining space. Mounted /windows. The / and /windows partitions each kept their own names and UUIDs, and everything is running fine. I have never seen any swap space being used before, and I don't intend to use the hibernate function, so I think removing swap was a good idea.

    Read the article

  • Running multiple box2D world objects on a server

    - by CharbelAbdo
    I'm creating a multiplayer game using LibGdx (with Box2d) and Kryonet. Since this is the first time I work on multiplayer games, I read a bit about server - client implementations, and it turns out that the server should handle important tasks like collision detection, hits, characters dying etc... Based on some articles (like the excellent Gabriel Gambetta Fast paced multiplayer series), I also know that the client should work in parallel to avoid the lag while the server responds to commands. Physics wise, each game will have 2 players, and any projectiles fired. What I'm thinking of doing is the following: Create a physics world on the client When the game is signaled to start, I create the same physics world on the server (without any rendering obviously). Whenever the player issues a command (move or fire), I send the command to the server and immediately start processing it on the client. When the server receives the command, it applies it on the server's world (set velocity etc...) Each 100ms, the server sends the new state to the client which corrects what was calculated locally. Any critical action (hit, death, level up) is calculated only on the server and sent to the client. Essentially, I would have a Box2d World object running on the server for each game in progress, in sync with the worlds running on the clients. The alternative would be to do my own calculations on the server instead of relying on Box2D to do them for me, but I'm trying to avoid that. My question is: Is it wise to have, for example, 1000 instances of the World object running and executing steps on the server? Tomcat used around 750 MBytes of memory when trying it without any object added to the world. Anybody tried that before? If not, is there any alternative? Google did not help me, are there any guidelines to use when you want to have physics on both the client and the server? Thanks for any help.

    Read the article

  • OpenGL ES 2.0 texture distortion on large geometry

    - by Spruce
    OpenGL ES 2.0 has serious precision issues with texture sampling - I've seen topics with a similar problem, but I haven't seen a real solution to this "distorted OpenGL ES 2.0 texture" problem yet. This is not related to the texture's image format or OpenGL color buffers, it seems like it's a precision error. I don't know what specifically causes the precision to fail - it doesn't seem like it's just the size of geometry that causes this distortion, because simply scaling vertex position passed to the the vertex shader does not solve the issue. Here are some examples of the texture distortion: Distorted Texture (on OpenGL ES 2.0): http://i47.tinypic.com/3322h6d.png What the texture normally looks like (also on OpenGL ES 2.0): http://i49.tinypic.com/b4jc6c.png The texture issue is limited to small scale geometry on OpenGL ES 2.0, otherwise the texture sampling appears normal, but the grainy effect gradually worsens the further the vertex data is from the origin of XYZ(0,0,0) These texture issues do not occur on desktop OpenGL (works fine under Windows XP, Windows 7, and Mac OS X) I've only seen the problem occur on Android, iPhone, or WebGL(which is similar to OpenGL ES 2.0) All textures are power of 2 but the problem still occurs Scaling the vertex data - The values of a vertex's X Y Z location are in the range of: -65536 to +65536 floating point I realized this was large, so I tried dividing the vertex positions by 1024 to shrink the geometry and hopefully get more accurate floating point precision, but this didn't fix or lessen the texture distortion issue Scaling the modelview or scaling the projection matrix does not help Changing texture filtering options does not help Disabling mipmapping, or using GL_NEAREST/GL_LINEAR does nothing Enabling/disabling anisotropic does nothing The banding effect still occurs even when using GL_CLAMP Dividing the texture coords passed to the vertex shader and then multiplying them back to the correct values in the fragment shader, also does not work precision highp sampler2D, highp float, highp int - in the fragment or the vertex shader didn't change anything (lowp/mediump did not work either) I'm thinking this problem has to have been solved at one point - Seeing that OpenGL ES 2.0 -based games have been able to render large-scale, highly detailed geometry

    Read the article

  • Looking for suggestions: becoming a hireable, young programmer [closed]

    - by Dan
    I am a 17 year old Java programmer that has filled the last year with learning all of the ins and outs of Java - Using Eclipse, and the help of a friend of the family (a Java programming architect for some company), I have learned everything from serializing objects, basic networking, generics, reflection, multi-threading, code optimization and efficiency & some concurrency safety - built my own proxy class, and nowadays, I answer questions on Project Euler. I am seeking some suggestions though on where I go next, or where I go from here to get a job in programming. I dedicate at least an hour every day to coding, sometimes literally, the entire day, and I really have come to love the process. I just started reading Effective Java (v2), and learning Scala (as I see often, possibly the Java replacement) I will be going to college for Computer Science next year - and taking AP computer science this year (however, I took a practice exam and got an 87, only need a 60to70 to pass, so no need to study for it too much) -- I was wondering if getting the SE 7 OCA and OCP would help me in trying to get a programming job. I looked around and most people have said online that an OCA/OCP are practically useless, but, at my age do they make me any more credible? More or less, what would you recommend to get a job in programming these days - or distinguish yourself from the crowd? I have enough time and dedication to learn another language, or anything really. Thank you very much.

    Read the article

  • configuring USB modem( Huawei EC156) in ubuntu 13.10

    - by user205427
    I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

    Read the article

  • Internal Mic not working on Dell Adamo 13

    - by AFD
    So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

    Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >