Search Results

Search found 31360 results on 1255 pages for 'virtual address space'.

Page 270/1255 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

• Cannot Access Web Interface on HP 2510G

  - by Stephen

  I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

  Read the article

• ifconfig ignores alias on IPv6

  - by Marten Lehmann

  When I add an IPv4 address for the interface eth0:0 with ifconfig, it is created correctly: ifconfig eth0:0 add 192.168.10.10 This can be verified by ifconfig or "ip a". When I add an IPv6 address however, ifconfig seems to ignore the alias of the interface: ifconfig eth0:0 add fc00::2/48 The address fc00::2/48 is added to eth0 then, not to eth0:0, no matter if eth0:0 previously exists with an IPv4 address or not. I'm doing this on CentOS 5 but I guess it is a general behaviour of ifconfig? Am I doing something wrong or is this by intention? I'm using separate aliases for interfaces very often and I hoped to use it for IPv6 as well. Kind regards Marten

  Read the article

• Google Apps e-mail being rejected from some domains

  - by Paul J. Lucas

  I'm migrating e-mail for my domains to Google Apps' e-mail. Most everything seems to work except e-mail sent to any user at (at least) sonic.net is rejected with a message of the form (where any-address has been substituted for my friend's address): From: Mail Delivery Subsystem <[email protected]> Date: March 11, 2010 10:04:48 AM PST To: [email protected] Subject: Delivery Status Notification (Failure) Delivered-To: [email protected] Received: by 10.229.194.26 with SMTP id dw26cs8717qcb; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Received: by 10.223.68.143 with SMTP id v15mr3841599fai.62.1268330688325; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Received: by 10.223.68.143 with SMTP id v15mr5119424fai.62; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Mime-Version: 1.0 Return-Path: <> X-Failed-Recipients: [email protected] Message-Id: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.1.1 <[email protected]>... No such user here (state 13). And here are the headers from the message it bounces back: Received: by 10.101.90.7 with SMTP id s7mr2515885anl.176.1267979929490; Sun, 07 Mar 2010 08:38:49 -0800 (PST) Return-Path: <[email protected]> Received: from [10.0.1.203] (adsl-76-201-171-194.dsl.pltn13.sbcglobal.net [76.201.171.194]) by mx.google.com with ESMTPS id 4sm1046550yxd.70.2010.03.07.08.38.48 (version=TLSv1/SSLv3 cipher=RC4-MD5); Sun, 07 Mar 2010 08:38:49 -0800 (PST) From: "Paul J. Lucas" <[email protected]> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: Some fascinating subject Date: Sun, 7 Mar 2010 08:38:46 -0800 References: <[email protected]> To: [email protected] Message-Id: <[email protected]> Mime-Version: 1.0 (Apple Message framework v1077) X-Mailer: Apple Mail (2.1077) However, I am able to send mail to a user at sonic.net using my old e-mail account. Also, my company uses Google Apps for e-mail and I can send e-mail to a user at sonic.net from my company. The differences between my personal e-mail and my company's are: My company's domain has no SPF record whereas mine does. My company's domain has an A record whereas mine does not. My SPF record initially was as prescribed by Google here. However, this guy claims Google is wrong and gives a fix. I've tried it both ways with no difference. My SPF record is currently: v=spf1 mx include:aspmx.googlemail.com include:_spf.google.com ~all As for the lack of an A record, you wouldn't think that a mail host would care about that so long as mx records are defined. However, the funny thing is that if you look at the error message, why does Google state that the recipient's domain stated that there is "No such user here" for my address? That makes no sense. Of course there is no user having my address at sonic.net. Also, I assume that I just discovered that I can't send mail to users at sonic.net by accident and that there are probably other domains I can't send e-mail to. So... anybody have any idea what's going on? And how I can get mail to users at sonic.net?

  Read the article

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• Why doesn't Apache start from xampp control panel after changes to vhosts config?

  - by Grafica

  I'm running xampp on my local server, and want to host multiple sites, so I changed the httpd-vhosts.conf file. Will somebody let me know if there is something wrong with my code? Apache was running while I had only one site in the config, but after I added another site, I stopped apache, and I'm not able to restart it. # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # ##NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host.localhost" ##ServerName dummy-host.localhost ##ServerAlias www.dummy-host.localhost ##ErrorLog "logs/dummy-host.localhost-error.log" ##CustomLog "logs/dummy-host.localhost-access.log" combined ##</VirtualHost> ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost" ##ServerName dummy-host2.localhost ##ServerAlias www.dummy-host2.localhost ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined ##</VirtualHost> NameVirtualHost * <VirtualHost *> DocumentRoot "C:\xampp\htdocs" ServerName localhost </VirtualHost> <VirtualHost *> DocumentRoot "C:\xampp\htdocs" ServerName evamagnus.com <Directory "C:\xampp\htdocs\"> Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *> DocumentRoot "C:\xampp\htdocs2\" ServerName mygrafica.com <Directory "C:\xampp\htdocs2\"> Order allow,deny Allow from all </Directory> </VirtualHost> Here is what it says in the control panel: 2:17:37 PM [apache] Starting apache service... 2:17:38 PM [apache] Status change detected: running 2:17:39 PM [apache] Status change detected: stopped Thanks in advance.

  Read the article

• KVM machine does not start ssh, network is started, used to work

  - by lleto

  have been searching an pulling my hear out for the last 6 hours. I have a virtual machine that has been running fine for the last six months. I was happy ssh'ing into it and it was running a database and some small apps. Tonight ssh stopped working, so I decided to reboot the machine. I now have the following situation: virsh list --all states machine as running I can ping the machine and get a reply When I ssh to the machine I see "ssh: connect to host [myserver] port 22: Connection refused" nmap does not show port 22 as open I have tried to: - reboot the machine once more (no luck) - mount the filesystem and check /etc/ssh/sshd.conf (has not changed since working situation) - install virsh console, however this does not seem to work When I mount the fs directly using losetup the strange thing is that file dates seem to be frozen in /var/log/ around the time of the crash. If I look in /var/run/ I can see an sshd.pid, but the time is 6 hours ago (and numerous reboots). My virsh xml looks like this: <domain type='kvm' id='21'> <name>myserver</name> <uuid>09678c8d-a99b-1d18-a7af-88d027cc8f93</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/disk01/myserver'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:e3:13:86'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='apparmor' relabel='yes'> <label>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</label> <imagelabel>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</imagelabel> </seclabel> </domain> I'm sort of lost as to where I can look to get the machine up and running again. On the same instance of kvm I have another server running which is working fine. Both are Ubuntu 12.04. All help is welcome....

  Read the article

• How to balance the root domain using NS records?

  - by Patrick McCurley

  I have two load balancers that balance incoming traffic across multiple data centers. These work fine. I can test them out by doing an 'nslookup mydomain.com xIP' I have now taken out DNS services with DYN.com to allow me to manage the DNS Zone file so that typing mydomain.com will ask my load balancers what the IP address is to resolve. Step 1 : the NS record for www. I set up A records (glue) for ns1 & ns2, then the corresponding NS record to delegate the DNS lookup to the balancers instead of DYN.com's nameservers. ns1.mydomain.com A [ip address of load balancer 1] ns2.mydomain.com A [ip address of load balancer 1] www.mydomain.com NS ns1.mydomain.com www.mydomain.com NS ns2.mydomain.com All is well - when I type www.mydomain.com, the requests get delegated to my load balancers who provide the IP address of the endpoint and the connect is made successfully. Step 2 : the NS record for root. This is where I run into problems. I need customers to be able to type 'mydomain.com' (without the www) and ALSO get delegated to the load balancers for the IP address. However - of the research I have done, and through the DYN control panel, it seems to be not allowed to provide an NS record for the root - as this overrides the default NS servers. How can i delegate both the root, and the www. to my load balancers?

  Read the article

• How to configure Exchange Server with AutoReply that sends the reply only once?

  - by Abel

  If you configure Exchange Server 2007 for auto-reply on a public address, and the reply is sent to an address that also has auto-reply or out-of-office-auto-reply, then Exchange Server will receive a new message, same from-address, and will again send an auto-reply. This can go on forever and can potentially lead to a DoS situation. How can I prevent multiple sending of auto-reply to the same address, preferably in a given timeframe (to prevent legitimate multiple mails to be treated incorrectly), using Exchange Server 2007? Our XS hosting provider says it cannot be done, but that strikes me as odd.

  Read the article

• what is ip 10.1.1.130 to which seems monitored by NT Kernel & System process on Windows 7?

  - by EndangeringSpecies

  I used netstat to see what is happening with network connections, and I see this weird ip address somehow listed together with PID 4 "NT Kernel & System", whatever that might be. Netstat describes it as a "local address" and there is no "foreign address" involved (btw, what are local and foreign addresses anyway?) In the column to the right there is neither "listening" nor "established" record, so no record at all there.

  Read the article

• How can I forward ALL traffic over a site-to-site VPN on Cisco ASA?

  - by Scott Clements

  Hi There, I currently have two Cisco ASA 5100 routers. They are at different physical sites and are configured with a site-to-site VPN which is active and working. I can communicate with the subnets on either site from the other and both are connected to the internet, however I need to ensure that all the traffic at my remote site goes through this VPN to my site here. I know that the web traffic is doing so as a "tracert" confirms this, but I need to ensure that all other network traffic is being directed over this VPN to my network here. Here is my config for the ASA router at my remote site: hostname ciscoasa domain-name xxxxx enable password 78rl4MkMED8xiJ3g encrypted names ! interface Ethernet0/0 nameif NIACEDC security-level 100 ip address x.x.x.x 255.255.255.0 ! interface Ethernet0/1 description External Janet Connection nameif JANET security-level 0 ip address x.x.x.x 255.255.255.248 ! interface Ethernet0/2 shutdown no nameif security-level 100 no ip address ! interface Ethernet0/3 shutdown no nameif security-level 100 ip address dhcp setroute ! interface Management0/0 nameif management security-level 100 ip address 192.168.100.1 255.255.255.0 management-only ! passwd 2KFQnbNIdI.2KYOU encrypted ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup NIACEDC dns server-group DefaultDNS name-server 154.32.105.18 name-server 154.32.107.18 domain-name XXXX same-security-traffic permit inter-interface same-security-traffic permit intra-interface access-list ren_access_in extended permit ip any any access-list ren_access_in extended permit tcp any any access-list ren_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_nat0_outbound extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list JANET_20_cryptomap extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_access_in extended permit ip any any access-list NIACEDC_access_in extended permit tcp any any access-list JANET_access_out extended permit ip any any access-list NIACEDC_access_out extended permit ip any any pager lines 24 logging enable logging asdm informational mtu NIACEDC 1500 mtu JANET 1500 mtu management 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 nat-control global (NIACEDC) 1 interface global (JANET) 1 interface nat (NIACEDC) 0 access-list NIACEDC_nat0_outbound nat (NIACEDC) 1 192.168.12.0 255.255.255.0 access-group NIACEDC_access_in in interface NIACEDC access-group NIACEDC_access_out out interface NIACEDC access-group JANET_access_out out interface JANET route JANET 0.0.0.0 0.0.0.0 194.82.121.82 1 route JANET 0.0.0.0 0.0.0.0 192.168.3.248 tunneled timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute http server enable http 192.168.12.0 255.255.255.0 NIACEDC http 192.168.100.0 255.255.255.0 management http 192.168.9.0 255.255.255.0 NIACEDC no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto map JANET_map 20 match address JANET_20_cryptomap crypto map JANET_map 20 set pfs crypto map JANET_map 20 set peer X.X.X.X crypto map JANET_map 20 set transform-set ESP-AES-256-SHA crypto map JANET_map interface JANET crypto isakmp enable JANET crypto isakmp policy 10 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication pre-share encryption aes-256 hash sha group 5 lifetime 86400 tunnel-group X.X.X.X type ipsec-l2l tunnel-group X.X.X.X ipsec-attributes pre-shared-key * telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd address 192.168.100.2-192.168.100.254 management dhcpd enable management ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect http ! service-policy global_policy global prompt hostname context no asdm history enable Thanks in advance, Scott

  Read the article

• VPN networking issue

  - by DuncanDavies

  I have 2 servers hosted in the cloud. One an application server, one a VPN server, both running Win2008. Both have a local IP address assigned by DHCP in different network subnets, 10.227.55.0 (VPN) and 10.231.5.0 (App Server). These servers can ping each other. My VPN client connects in to the VPN server (using a L2TP connection on a Win7 client). It is assigned an IP Address from the VPN server's static pool (the VPN server takes 192.168.100.1, the client is given 192.168.100.2). The client can ping both the 192.168.100.1 address of the VPN server, and its 'local' IP address (10.227.55.X). What the client can't do is ping the App Server. How can I configure routing so that my client can access the App Server, without hard-coding any of the DHCP IP addresses anywhere? thanks Duncan

  Read the article

• Scientific Linux - mysql and apachefail to start on reboot

  - by Derek Deed

  Both mysqld and httpd fail to restart following a reboot of the server, although chkconfig --list shows both daemons set to on for run levels 2,3,4 & 5 All control is being exectuted via Webmin Reboot server – MySQl and Apache not running MySQL Database Server MySQL version 5.1.69 MySQL is not running on your system - database list could not be retrieved. Click this button to start the MySQL database server on your system with the command /etc/rc.d/init.d/mysqld start. This Webmin module cannot administer the database until it is started. Apache Webserver Apache version 2.2.15 Start Apache Search Docs.. Global configuration Existing virtual hosts Create virtual host Select all. | Invert selection. Default Server Defines the default settings for all other virtual servers, and processes any unhandled requests. Address Any Port Any Server Name Automatic Document Root /var/www/drupal Virtual Server Processes all requests on port 443 not handled by other virtual servers. Address Any Port 443 Server Name Automatic Document Root /var/www/drupal Select all. | Invert selection. chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart Apache chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart MySQL chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off Everything now running okay; but no difference in the chkconfig outputs above. Set chkconfig --levels 235 httpd on /etc/init.d/httpd start The same for mysqld but no change in operation. Log files show that the shutdown has been completed successfully; but there is no indication of the service restarting until it is executed manually: 131112 13:59:15 InnoDB: Starting shutdown... 131112 13:59:16 InnoDB: Shutdown completed; log sequence number 0 881747021 131112 13:59:16 [Note] /usr/libexec/mysqld: Shutdown complete 131112 13:59:16 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 131112 14:09:52 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131112 14:09:52 InnoDB: Initializing buffer pool, size = 8.0M 131112 14:09:52 InnoDB: Completed initialization of buffer pool [Tue Nov 12 13:59:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 13:59:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 13:59:13 2013] [notice] Digest: done [Tue Nov 12 13:59:14 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations [Tue Nov 12 13:59:14 2013] [notice] caught SIGTERM, shutting down [Tue Nov 12 14:27:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 14:27:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 14:27:13 2013] [notice] Digest: done [Tue Nov 12 14:27:13 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations Is anyone able to shed any light on this problem, Cheers, Derek.

  Read the article

• getting Internet connection sharing working in a slightly more complicated configuration

  - by tirichitirca t

  I have the following configuration: Computer A - Mac OSX 10.8.4, wireless & wired adapters Computer B - Windows 7 (64 bit), wireless & wired adapters, has internet connection via the wired adapter (ethernet) d-link wired/wireless router. Problem to solve: Connect from computer A to the internet through the wired connection of computer B. I tried the following: I set up a local network between A and B using the d-link router. The configuration is this: D-link router - 192.168.0.1 A - wired connection to the d-link router, static 192.168.0.101 (I could have used the wireless but I preferred the wired connection) B - wireless connection to the d-link router DHCP 192.168.0.102 (but I made sure it always gets the same address) B - wired connection to the internet using some address that begins with 10.x.y.z. In this configuration A can see B. I enabled ICS on the wired adapter of B. I set up the Gateway of A to point to B and DNS servers to point to the DNS servers specified for the 10.x.y.z address. It doesn't work, A goes only as far as B. It can ping the 10.x.y.z address of B though. I then found this article: http://terrybritton.com/windows-internet-connection-sharing-ics-not-working-with-linux-bridging-is-the-solution-916/. Terry is suggesting that a bridge should be defined on B between the two connections. I tried that but basically computer B is screwed as soon as I create the bridge. It can't connect to the internet anymore. It is as if the network bridge seems to think the traffic to the internet should go from the wired connection to the wireless and not the other way around. The other thing that puzzles me is the router itself. In general the router needs an internet address. In a normal configuration it is the router that gets the ip address and the internet traffic goes through the router. In my case I am not interested in that. So, any suggestions to get this working? I wouldn't shy away from using a commercial software but I would think windows 7 should allow me to do it. Thanks

  Read the article

• Mac Websharing Off but Process Running

  - by benedict_w

  I have my mac setup to use php / mysql / apache via macports. Recently it has gone a bit pear shaped: it seems that the local mac versions of apache and mysql are running blocking the macports services: (48)Address already in use: make_sock: could not bind to address [::]:80 (48)Address already in use: make_sock: could not bind to address [::]:443 Web sharing in System preferences is off - How can I properly disable it? I tried turning it on an off again in System Preferences but it would not changed from off to on. Also if I kill the process it starts running again.

  Read the article

• Mac OS X Server 10.6.6 DNS not responding properly, get a "Truncated, retrying in TCP mode" for subdomain

  - by Eric Arseneau

  If I do an nslookup on youtube.com, no problem, if I do one with www.youtube.com, failure. See details below. [~] nslookup youtube.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: Name: youtube.com Address: 74.125.127.93 Name: youtube.com Address: 74.125.47.93 Name: youtube.com Address: 74.125.95.93 [~] nslookup www.youtube.com ;; Truncated, retrying in TCP mode. ;; Connection to 192.168.1.1#53(192.168.1.1) for www.youtube.com failed: connection refused. If I do the same from a Windows machine its fine, its when I do it from a Mac workstation that I get the issue. I have rebooted, both server and workstation, I did a changeip, but nothing is working. Any recommendations?

  Read the article

• Does not recognize usb sticks and drives

  - by Peter

  When connecting any usb stick to my thinkpad ubuntu 10.10 does not recognize them. I don't see anything on the desktop. the output of "dmesg | tail -n10" gives me: [ 1965.696388] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1965.884537] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.072503] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.260349] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.506227] usb 1-1: new high speed USB device using ehci_hcd and address 9 [ 1966.572375] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.760379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.948358] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.136335] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.325423] hub 1-0:1.0: unable to enumerate USB device on port 1 When connecting my usb scanner to the same port: [ 2008.480135] usb 1-1: new high speed USB device using ehci_hcd and address 65 [ 2008.548389] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.736786] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.924379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.112348] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.300443] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.488536] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.732180] usb 1-1: new high speed USB device using ehci_hcd and address 71 [ 2014.796299] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2018.000128] usb 2-1: new full speed USB device using uhci_hcd and address 3 And ubuntu 10.10 recognizes that scanner. So: What can i do to see my usb stick? BTW: on my other Thinkpad running fedora 14 it works perfectly... Cheers -Peter

  Read the article

• USB keyboard stopped working in Ubuntu with error -71

  - by tapan

  I have a usb keyboard which was working perfectly till now (about a year since i have been regularly using ubuntu). It suddenly stopped working. It stopped working when I connected a USB HDD. Now the keyboard works randomly .. working for a while and then stops working for a longer time. Here is the dmesg output : [ 705.817076] usb 5-1: device not accepting address 8, error -71 [ 705.928032] usb 5-1: new low speed USB device using uhci_hcd and address 9 [ 706.336060] usb 5-1: device not accepting address 9, error -71 [ 706.448055] usb 5-1: new low speed USB device using uhci_hcd and address 10 [ 706.568044] usb 5-1: device descriptor read/64, error -71 [ 706.792049] usb 5-1: device descriptor read/64, error -71 [ 707.008060] usb 5-1: new low speed USB device using uhci_hcd and address 11 [ 707.128041] usb 5-1: device descriptor read/64, error -71 [ 707.352052] usb 5-1: device descriptor read/64, error -71 [ 707.456068] hub 5-0:1.0: unable to enumerate USB device on port 1 Based on the suggestions here i tried the following two things: echo -1 > /sys/module/usbcore/parameters/autosuspend echo Y > /sys/module/usbcore/parameters/old_scheme_first However, i am still facing the same problem. Can anyone help me out with this ? I'm using Ubuntu 10.04 Lucid Lynx.

  Read the article

• Can connect to DNS addresses typed in the URL but not by IP addresses

  - by Ben

  I just changed over my modem to bridged mode, and changed my wireless router to PPPoE. My PC IP address is reserved and forwards port 80 to my computer's IP address based on my MAC address. I have a problem, however. I cannot access my local webserver by public IP address or my router 192.168.0.1 wirelessly from any other computer or iPad. I can, however, connect by this PC which is connected to the wireless router via ethernet. Via wireless, it says it cannot connect, however DNS addresses work (e.g. google.com, etc.) Any ideas?

  Read the article

• Configuring Multi-Tap on Synaptics Touchpad

  - by nunos

  I am having a hard time configuring my notebook's touchpad. The touchpad already works. It successfully responds to one-finger tap, two-finger tap and two-finger vertical scrolling. What I want to accomplish: change two-finger tap action from right-mouse click to middle-mouse click add three-finger tap functionality to yield right-mouse click action (i have checked that the three-finger tap is supported by my laptop's touchpad since it works on Windows) I read on a forum to use this as a guide. I have successfully accomplished point 1 with synclient TapButton2=2. However, I have to do it everytime I log in. I have tried to put that command on /etc/rc.local but the computer always boots and logins with the default configuration. Regarding point 2, I have tried synclient TapButton3=3 but it doesn't do anything when I three-finger tap the touchpad. I am running Ubuntu 11.10 on an Asus N82JV. /etc/X11/xorg.conf: nuno@mozart:~$ cat /etc/X11/xorg.conf Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection /usr/share/X11/xorg.conf.d/50-synaptics.conf: nuno@mozart:~$ cat /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

  Read the article

• OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

  - by inexion

  Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

  Read the article

• Windows 7 Multi-NIC woes

  - by Eric

  I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

  Read the article

• how to clear Window DNS cache

  - by Stevko

  My router reset and my ip address changed. DynDNS was updated with the new address automatically. But windows still pings the old address. How do I clear the DNS cache in Windows Vista?

  Read the article

• pound: multiple domains

  - by niklassaers

  Hi guys, I've been using pound to run mydomain.dk. Now I've bought some other domains and SSL certificates that are mydomain.no, mydomain.se and mydomain.eu. My old config looked roughly like this: ListenHTTPS Address 81.19.246.120 Port 443 Cert "/usr/local/etc/pound.keys/mydomain.dk.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End At places like here I've seen that I can use HeadRequire in the Service part, but I want the Host header to go together with the Cert, ideally something like ListenHTTPS Address 81.19.246.120 Port 443 HostAndCert "mydomain.dk" "/usr/local/etc/pound.keys/mydomain.dk.pem" HostAndCert "mydomain.se" "/usr/local/etc/pound.keys/mydomain.se.pem" HostAndCert "mydomain.no" "/usr/local/etc/pound.keys/mydomain.no.pem" HostAndCert "mydomain.eu" "/usr/local/etc/pound.keys/mydomain.eu.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End Any suggestions or clues to how I can accomplish this? Cheers Nik

  Read the article

• Hosting multiple email domains on single server

  - by sharjeel

  Is it practically possible to host multiple email domains on a single machine with single IP address? Considering that spam filters do RDNS and in that case one IP address may host only one domain to pass the spam filters. If not, how does the hosted email work? Do they have get a separate IP address for each domain's email they host?

  Read the article

• Hosting 2 different SSL domains on the same IP [closed]

  - by Jim

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have 2 different domains, domain1.com and domain2.net. Both require SSL certificates. I've got the certificates signed by a CA and now need to set them up on Apache. I've got a single IP address and have found a post here: SSL site not using the correct IP in Apache and Ubuntu that apparently works for ubuntu but I am on CentOS and have not had the same luck trying that configuration. When I try that configuration, Apache dies telling me that the port is already in use: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 I had SSL working for a single domain but now that I've added the second, I get a browser warning about the cert not belonging to the domain. How do I get both domains to work using virtual host containers?

  Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >