Search Results

Search found 41511 results on 1661 pages for 'via point'.

Page 271/1661 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• Assigning valid moves on board game

  - by Kunal4536

  I am making a board game in unity 4.3 2d similar to checkers. I have added an empty object to all the points where player can move and added a box collider to each empty object.I attached a click to move script to each player token. Now I want to assign valid moves. e.g. as shown in picture... Players can only move on vertex of each square.Player can only move to adjacent vertex.Thus it can only move from red spot to yellow and cannot move to blue spot.There is another condition which is : if there is the token of another player at the yellow spot then the player cannot move to that spot. Instead it will have to go from red to green spot. How can I find the valid moves of the player by scripting. I have another problem with click to move. When I click all the objects move to that position.But I only want to move a single token. So what can i add to script to select a specific object and then click to move the specific object.Here is my script for click to move. var obj:Transform; private var hitPoint : Vector3; private var move: boolean = false; private var startTime:float; var speed = 1; function Update () { if(Input.GetKeyDown(KeyCode.Mouse0)) { var hit : RaycastHit; // no point storing this really var ray = Camera.main.ScreenPointToRay (Input.mousePosition); if (Physics.Raycast (ray, hit, 10000)) { hitPoint = hit.point; move = true; startTime = Time.time; } } if(move) { obj.position = Vector3.Lerp(obj.position, hitPoint, Time.deltaTime * speed); if(obj.position == hitPoint) { move = false; } } }`

  Read the article

• Are Snow Leopard text substitutions scriptable?

  - by yonatron

  I prefer using typographical quotation marks when possible, so I love the Smart Quotes part of Snow Leopard’s text replacement feature. But there are a few cases in which I need to toggle it, and it’s a pain to do so from the contextual menu when I’m typing. Is there any way (preferably via AppleScript, but I can deal with other suggestions) to toggle specific types of text replacement for the frontmost text-input control? And if so, what’s a good way to assign it to a globally-accessible keyboard shortcut (via 3rd-party app if necessary)?

  Read the article

• Purpose oriented user accounts on a single desktop?

  - by dd_dent

  Starting point: I currently do development for Dynamics Ax, Android and an occasional dabble with Wordpress and Python. Soon, I'll start a project involving setting up WP on Google Apps Engine. Everything is, and should continue to, run from the same PC (running Linux Mint). Issue: I'm afraid of botching/bogging down my setup due to tinkering/installing multiple runtimes/IDE's/SDK's/Services, so I was thinking of using multiple users, each purposed to handle the task at hand (web, Android etc) and making each user as inert as possible to one another. What I need to know is the following: Is this a good/feasible practice? The second closest thing to this using remote desktops connections, either to computers or to VM's, which I'd rather avoid. What about switching users? Can it be made seamless? Anything else I should know? Update and clarification regarding VM's and whatnot: The reason I wish to avoid resorting to VM's is that I dislike the performance impact and sluggishness associated with it. I also suspect it might add a layer of complexity I wish to avoid. This answer by Wyatt is interesting but I think it's only partly suited for requirements (web development for example). Also, in reference to the point made about system wide installs, there is a level compromise I should accept as experessed by this for example. This option suggested by 9000 is also enticing (more than VM's actually) and by no means do I intend to "Juggle" JVMs and whatnot, partly due to the reason mentioned before. Regarding complexity, I agree and would consider what was said, only from my experience I tend to pollute my work environment with SDKs and runtimes I tried and discarded, which would occasionally leave leftovers which cause issues throught the session. What I really want is a set of well defined, non virtualized sessions from which I can choose at my leisure and be mostly (to a reasonable extent) safe from affecting each session from the other. And what I'm really asking is if and how can this be done using user accounts.

  Read the article

• Memory limiting solutions for greedy applications that can crash OS?

  - by Hooked

  I use my computer for scientific programming. It has a healthy 8GB of RAM and 12GB of swap space. Often, as my problems have gotten larger, I exceed all of the available RAM. Rather than crashing (which would be preferred), it seems Ubuntu starts loading everything into swap, including Unity and any open terminals. If I don't catch a run-away program in time, there is nothing I can do but wait - it takes 4-5 minutes to switch to a command prompt eg. Ctrl-Alt-F2 where I can kill the offending process. Since my own stupidity is out of scope of this forum, how can I prevent Ubuntu from crashing via thrashing when I use up all of the available memory from a single offending program? At-home experiment*! Open a terminal, launch python and if you have numpy installed try this: >>> import numpy >>> [numpy.zeros((10**4, 10**4)) for _ in xrange(50)] * Warning: may have adverse effects, monitor the process via iotop or top to kill it in time. If not, I'll see you after your reboot.

  Read the article

• Time Machine/iMac loses all trace of external hard drive after a few days

  - by Bill

  First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

  Read the article

• How to setup ssh's umask for all type of connections

  - by Unode

  I've been searching for a way to setup OpenSSH's umask to 0027 in a consistent way across all connection types. By connection types I'm referring to: sftp scp ssh hostname ssh hostname program The difference between 3. and 4. is that the former starts a shell which usually reads the /etc/profile information while the latter doesn't. In addition by reading this post I've became aware of the -u option that is present in newer versions of OpenSSH. However this doesn't work. I must also add that /etc/profile now includes umask 0027. Going point by point: sftp - Setting -u 0027 in sshd_config as mentioned here, is not enough. If I don't set this parameter, sftp uses by default umask 0022. This means that if I have the two files: -rwxrwxrwx 1 user user 0 2011-01-29 02:04 execute -rw-rw-rw- 1 user user 0 2011-01-29 02:04 read-write When I use sftp to put them in the destination machine I actually get: -rwxr-xr-x 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write However when I set -u 0027 on sshd_config of the destination machine I actually get: -rwxr--r-- 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write which is not expected, since it should actually be: -rwxr-x--- 1 user user 0 2011-01-29 02:04 execute -rw-r----- 1 user user 0 2011-01-29 02:04 read-write Anyone understands why this happens? scp - Independently of what is setup for sftp, permissions are always umask 0022. I currently have no idea how to alter this. ssh hostname - no problem here since the shell reads /etc/profile by default which means umask 0027 in the current setup. ssh hostname program - same situation as scp. In sum, setting umask on sftp alters the result but not as it should, ssh hostname works as expected reading /etc/profile and both scp and ssh hostname program seem to have umask 0022 hardcoded somewhere. Any insight on any of the above points is welcome. EDIT: I would like to avoid patches that require manually compiling openssh. The system is running Ubuntu Server 10.04.01 (lucid) LTS with openssh packages from maverick. Answer: As indicated by poige, using pam_umask did the trick. The exact changes were: Lines added to /etc/pam.d/sshd: # Setting UMASK for all ssh based connections (ssh, sftp, scp) session optional pam_umask.so umask=0027 Also, in order to affect all login shells regardless of if they source /etc/profile or not, the same lines were also added to /etc/pam.d/login. EDIT: After some of the comments I retested this issue. At least in Ubuntu (where I tested) it seems that if the user has a different umask set in their shell's init files (.bashrc, .zshrc,...), the PAM umask is ignored and the user defined umask used instead. Changes in /etc/profile did't affect the outcome unless the user explicitly sources those changes in the init files. It is unclear at this point if this behavior happens in all distros.

  Read the article

• libgdx collision detection / bounding the object

  - by johnny-b

  i am trying to get collision detection so i am drawing a red rectangle to see if it is working, and when i do the code below in the update method. to check if it is going to work. the position is not in the right place. the red rectangle starts from the middle and not at the x and y point?Huh so it draws it wrong. i also have a getter method so nothing wrong there. bullet.set(getX(), getY(), getOriginX(), getOriginY()); this is for the render shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.rect(bullet.getX(), bullet.getY(), bullet.getOriginX(), bullet.getOriginY(), 15, 5, bullet.getRotation()); shapeRenderer.end(); i have tried to do it with a circle but the circle draws in the middle and i want it to be at the tip of the bullet. at the front of the bullet. x, y point. boundingCircle.set(getX() + getOriginX(), getY() + getOriginY(), 4.0f); shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.circle(bullet.getBoundingCircle().x, bullet.getBoundingCircle().y, bullet.getBoundingCircle().radius); shapeRenderer.end(); thank you need it to be of the x and y as the bullet is in the middle of the sprite when drawn originally via paint.

  Read the article

• Cannot enable Additional drivers for Broadcom in 12.10

  - by Compt

  tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

  Read the article

• How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

  - by Dennis

  I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

  Read the article

• Automated testing tool development challenges (for embedded software)

  - by Karthi prime

  My boss want to come up with the proposal for the following tool: An IDE: Able to build, compile, debug, via JTAG programming for the micro-controller. A Test Suite, reads the code in the IDE, auto generates the test cases, and it gives the in-target unit testing results(which is done by controlling code execution in the micro-controller via IDE). A no-overhead code coverage tool which interacts with the test suite and IDE. My work is to obtain the high level architecture of this tool, so as to proceed further. My current knowledge: There are tool-chains available from the chip manufacturer for the micro-controllers which can be utilized along with an open-source IDE like Eclipse, and along with an open-source burner, a complete IDE for a micro-controller can be done. Test cases can be auto-generated by reading the source file through the process of parsing, scripting, based on keywords. Test suite must be able to command the IDE to control, through breakpoints, and read the register contents from the microcontroller - This enables the in-target unit testing. An no-overhead code coverage should be done by no-overhead code instrumentation so as to execute those in the resource constraint environment of the micro-controller. I have the following questions: Any advice on the validity of my understanding? What are the challenges I will have during the development? What are the helpful open-source tools regarding this? What is the development time for this software? Thanks

  Read the article

• Selecting primary Internet connection in Windows XP

  - by Mariusz

  There is a computer that has access to the Internet both via the local network and by a GSM modem. As far as I know, when both connections are active, the modem connection is the primary one and all data is transmitted by the modem. Because of the fact that the slow modem connection is supposed to be used as a backup connection, I want Windows to use it only when the connection via LAN is unavailable. At the same time I want the GSM modem connection to be active constantly. Is it possible to make Windows not use modem connection when there is a working LAN Internet connection? Thanks for your help in advance, Mariusz.

  Read the article

• Sharing an internet connection through the Ethernet port

  - by Bob Cunningham

  I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

  Read the article

• Sharing internet connection from Windows XP using wi-fi router

  - by Darius

  Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• IP assignment in a /28 block

  - by mks

  Need help on setting up firewall router. My config is as below: Public static network ID: x.x.x.48/28 gateway: x.x.x.49 available IP for the hosts: x.x.x.52 to 62 gw_eth0 <-- fw_eth0 - fw_eth1 <-- dmz_switch Four servers are connected on dmz_switch (say s1, s2, s3, s4) all have to use public static IP address from the above block. Any recommendation on IP assignment and route setup? Do I need to subnet the above block further or simply use /32 netmask and point-to-point static routes in the above setup?

  Read the article

• Citrix XenApp application does not have keyboard focus when launched

  - by Jason Pearce

  On new or existing Citrix XenApp 4.5 servers, I am having problems streaming the Allscripts Pro EHR application via the XenApp web interface. When users launch the application via the Citrix XenApp web interface, the application does not have focus, preventing users from typing in their username and password. If they use their mouse to select either the username or password fields, they still cannot enter any text. However, if they do any of the following actions, they can then enter in their username and password and the application runs without problems: Click on the Login button with empty fields. Logon fails but they can then enter their credentials. Minimize the login window and then maximize it. They can then gain keyboard focus to enter their credentials. What might be preventing this particular application from having focus when it launches?

  Read the article

• How to calculate bandwidth limits per user on WiFi network

  - by Lars

  A typical 802.11g access point can provide around 25 Mbps of bandwidth. How is the bandwidth shared among the users? Furthermore, how many users can be served by a single access point using 802.11g in an environment with low interference, and average web activity from the users? The goal is to use bandwidth limitation to avoid starvation for some users in case some of the users start to download a file or stream HD video or some other bandwidth intensive activity. Can someone break down the math on this?

  Read the article

• Hang while starting several daemons

  - by Adrian Lang

  I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before.

  Read the article

• IIS7 response size thresholds

  - by DanielM

  I have a customer who is attempting video playback via HTTP progressive download of very large files ( 1 GB). There is no problem once a file is cached at the edge via my CDN, but hits to my origin (first hits prior to edge-cache population) experience stalling and loss of sync between audio and video about an hour and a half into playback. This occurs pretty reliably at that point, suggesting that some threshold somehwere is getting hit. Are there IIS configuration knobs governing HTTP Response size? Other data points: I am unable to replicate this problem. I am looking at client bandwidth and last mile issues. I am looking at possible encoding recipe dependencies. But this problem never came up when we were using a "push" cache configuration (CDN-hosted origin), so something funky serverside at my origin seems like a likely culprit. Thanks ...

  Read the article

• Remove unwanted Mount option from Places Menu

  - by Jack

  On Ubuntu 10.10, I added a CIFS network share into /etc/fstab using /media/pub as my mount point. The share becomes visible on the Desktop and under Places (drive icon), which is what I want. But the problem is, Ubuntu 10.10 (unlike 10.04) creates another entry under Places with same name "pub", except this appears to be a mount shortcut rather than another link to the share. When I move my mouse over it says "Mount pub" and if I click on it, it will mount the share and again each time (if already mounted) - it does not display contents of share. In either case, an error pops up soon after "Unable to mount pub - Timeout waiting for mount to appear". The share itself is accessible, but I can't unmount via GUI, system reports its mounted multiple times and I have to unmount via terminal. (sudo umount -a) As I'm mounting the share at boot time, I don't need this manual option under Places. Is there an easy way to stop Ubuntu from listing it under Places? I have tried making the mount point under /mnt, this fixes the problem, except creates another as it removes the drive icon from Desktop and Places. I could create a bookmark, but just wondered if there's an easy fix to this unwanted entry under Places. Thanks

  Read the article

• Abstract Factory Method and Polymorphism

  - by Scotty C.

  Being a PHP programmer for the last couple of years, I'm just starting to get into advanced programming styles and using polymorphic patterns. I was watching a video on polymorphism the other day, and the guy giving the lecture said that if at all possible, you should get rid of if statements in your code, and that a switch is almost always a sign that polymorphism is needed. At this point I was quite inspired and immediately went off to try out these new concepts, so I decided to make a small caching module using a factory method. Of course the very first thing I have to do is create a switch to decide what file encoding to choose. DANG! class Main { public static function methodA($parameter='') { switch ($parameter) { case 'a': $object = new \name\space\object1(); break; case 'b': $object = new \name\space\object2(); break; case 'c': $object = new \name\space\object3(); break; default: $object = new \name\space\object1(); } return (sekretInterface $object); } } At this point I'm not really sure what to do. As far as I can tell, I either have to use a different pattern and have separate methods for each object instance, or accept that a switch is necessary to "switch" between them. What do you guys think?

  Read the article

• Introducing Code Map for Visual Studio 2012 September CTP

  - by krislankford

  As part of the Visual Studio 2012 CTP for September, Visual Studio got a little sexier at helping you discover and visualize your code. The introduction of the Code Map feature helps compliment the variety of other tools that are included with Visual Studio to help you analyze and visualize your projects and solutions. Code Map leverages the dgml format within Visual Studio that is currently used b the Architecture and Modeling tools. This is a nice addition that gets us from point A to point B a little faster. The great thing about Code Map is that you can gain access to the functionality from directly within your code from the context menu. This Code Map functionality is also context specific based on your cursor. You can evaluate and add items such as methods and variables directly to the Code Map window. As you add items the Code Map surface is updated to show your new item plus any relationships and dependencies that have been introduced in your code. Something that is also very nice is that the Code Map surface is interactive and allows you to use the F12 button (Go To Definition) which can help you navigate your code especially is you are adding items that span multiple files or projects. To get started all you have to do is go out and download the September CTP for Visual Studio 2012 located here. Happy Coding!   Code Map Window

  Read the article

• Thunderbird: Synchronize tags

  - by fuenfundachtzig

  When I check my mail (via IMAP) on my laptop I'd like to see the same tags that I set when I checked my mail on my office computer. So the question is: Is it possible to synchronize user-specified mail tags between Thunderbird running on different computers? I've read that tags could be stored via IMAP on the server, so maybe it's just that the server of my mail provider does not support this IMAP feature? (Whichever it is...) Has anybody any experience with this? Related, but not my primary concern: Will there ever be a more flexible tagging system in Thunderbird which allows for an easier definition of new tags? (I.e. that a don't have to define new tags in the preferences menu, but can just type them in when reading a mail?)

  Read the article

• Plesk hosting on MediaTemple DV

  - by David

  Hi there, We have a MediaTemple dedicated virtual running Plesk. The problem we're having is that changing the permissions of files on the server to be writable by server owner (apache) is conflicting with the ability to upload and overwrite files via the FTP user. Here's an example, I upload a file from user "serverftp" and they own the new file in the httpdocs folder. I then change the permission of an image upload folder to the apache user to that I can upload images via a PHP script. Uploading or changing that folder with the serverftp user is then locked out. Speaking to tech support didn't get very far because there are some strange group permissions going on and it would involve me adding every single domain FTP user to the pcantl group or something similar. I'm wondering how I can easily change things so that I don't have this problem anymore.

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >