Search Results

Search found 12829 results on 514 pages for 'hard'.

Page 272/514 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Less reboots on Windows Server Core, is this true or just a myth?

  - by Peter Hahndorf

  Because there are less components installed on a Windows Server core OS, it needs less patches than the full OS. I read in several places that therefor it needs less reboots after patching. I'm running Server 2012 core in production since September 2012 now and I don't remember a single patch-Tuesday when I did not have to reboot the server after installing Windows updates. Are there any hard numbers out there that compare the required reboots for core vs. Full OS? Less reboots may be the main reason why people choose to go with Server core. If it actually requires just as many reboots as the full OS install, they may think again the next time they set up a server.

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• TeamViewer: How to disable color dithering for low-bit-depth screen settings

  - by gogowitsch

  I am using Terminal Services and TeamViewer a lot to access other computers, partly over slow networks. The problem described below is not affected by which of the two remote access services I am using. When accessing Windows 7 Professional machines, a great deal of text is hard to read as the background is dithered. Even for exactly the same colors, Windows 2003 does not seem to dither at all, but to choose the closest available color. I strongly prefer the latter, as I don't care for the exact colors, I just want to be able to read easily. I am not sure whether this is operating system-related. The programs on the remote systems do not allow me to change the color choices for the various backgrounds to anything sane. Is there a way to disable this color dithering using some target operating system setting that will do the trick for both Terminal Services and TeamViewer?

  Read the article

• UDF filesystem -> Maximum number of files

  - by user978122

  I am considering partitioning a rather large hard drive with the UDF filesystem for an experiment, and would like to ask if anyone knows the maximum number of files, either by directory, or as a whole, that the UDF filesystem can handle? For some background, I looked at the JFS and XFS filesystems (NTFS has a limitation of the number of files per volume); however, since I run Windows, that's kind of out. UFD, on the other hand, does not appear to have these limitations, but then, I cannot really find any information on just how many files per volume the UDF file system supports.

  Read the article

• Cannot find the 2nd datastore after upgrading ESXi 3.5

  - by aXqd

  I have an ESXi server (version 3.5) with about 60 VMs. It has 2 hard disks, each of which is regarded as a datastore. After upgrading through 'VMware Infrastructure Update' tool(still staying with 3.5 instead of 4.0) and a reboot, I can only see the 1st datastore. Hence many VMs are, now, inaccessible. I wonder how I can get the 2nd datastore back. I am sorry, but I did't have the 2nd datastore backuped before. BTW, I am still thinking of upgrading directly to version 4.0 to see if it can fix the driver problem. How about that?

  Read the article

• Auto-resize images in Opera

  - by Nick

  Is there a setting that I can configure to automatically scale large images like Firefox does? I'm using Opera 10.53, and when I open a large image in a new tab, it is not scaled at all. I'm on a laptop, so it is hard to view, and when I am viewing multiple images, it is tedious to scale each image down to 20% or whatever fits it best. I found this thread, and for a fleeting moment thought I had found the answer, but apparently not. They just told the poster to manually resize. Thanks.

  Read the article

• Is there anything like a link or shared mount point for FAT32 folders in Linux/Android?

  - by endolith

  I often want the same files to be accessed by different apps on my Android phone, but the apps look in different folders. Is there a way to make two different folder paths on a FAT SD card point to the same file? For EXT, I think I could do this with a symbolic or hard link, but those don't exist for FAT. Can FAT be extended to support them? Can Android use an EXT-formatted SD card? Can a folder be mounted on top of another folder? If this does exist, does it have any negative side effects?

  Read the article

• Permissionless external drive with NTFS

  - by user12889

  I have an external hard disk which has 1 partition, formatted in NTFS. I use this drive on multiple computers with a different logins on different machines, Windows XP and Windows 7. All files are plain old files, not OS encrypted or compressed. Every now and then Windows 7 does not let me access some files, citing permission problems. I can circumvent this per case by taking ownership and setting appropriate permissions. This, however, is tedious. Is there a simple way to tell Windows to not enforce or store any permissions on any file/directory on a partition?

  Read the article

• System says memory controller not available and doesn't boot?

  - by Martin

  Hello everybody, Recently I have had a MainBoard-problem. I've send my mainboard to service and today I got it back from the company. It is a Foxconn 520a mainboard. Now I have installed my exchanged mainboard. But now I have a problem. My system boots until the device list with IRQ entries appear. The system says "Verifying DMI-pool-data..." and nothing happens. The IRQ-device list shows that the memory-controller is not available. All other devices have got an IRQ. Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ 0 0 0 10DE 0547 0500 Memory Controller NA Do you have any ideas where the problem could be? I already have disconnected all unnecessary devices like the hard disks. Perhaps it is a BIOS problem, but I don't know where I should look. Would be nice if there is any advice, Greetings, Martin

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• Excel sum from column based on another column

  - by jsmars

  I have two columns. The values in the first one are either blank or have a 1. The values in the second one is a number. I also have a variable field. At the bottom of each column, I'd like to have a "total" field, which checks if there is a value (of 1) in the first column, and if there is, adds this up from the value of the second column (on the same row) and multiplies it by the variable. for example: variable 10 name1 name2 counter 1 2 1 3 1 1 3 1 4 totals 100 50 since name1 has 3 1's in it's column, it takes each value from the counter column, and multiplies it by the variable, and outputs the total I'm sorry if this has been asked, I've tried searching but I have a hard time understanding the excel syntaxes. Thanks!

  Read the article

• Why does text look so Horrible on my HD monitor?

  - by Laura

  I just bought a 1080p 22" Samsung Syncmaster 2333HD (connected via HDMI) and the picture and video quality is great but the text quality is absolutely horrible. This monitor has a built in HD TV tuner. Even as I type now all the text in this text box as well as in the browser toolbar and start menu, etc looks weird - like it all has a white outline around it that makes it jagged and hard to read. It hurts my eyes just to look at it. I am running my PC in the suggested native resolution of 1920x1080, so what's the problem? Is this one of the unavoidable downsides of using a HD monitor? Is there a solution to the problem?

  Read the article

• How do you make Windows 7 fully case-sensitive with respect to the filesystem?

  - by trusktr

  I want to make Windows 7 case-sensitive when it reads/writes anything on the hard drive (the C drive, or any other NTFS drive). I found a video via google that says to change the registry key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DontPrettyPath to a value of 1 (source). I also found a Windows support item that says something about modifying the registry key HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\obcaseinsensitive that leads me to assume putting a value of 0 will make Windows case-sensitive with NTFS filesystems (source). I have a feeling the second solution is the answer, but I'm not sure and I don't want to try it without being sure. Does anyone know for sure what is the correct way to make Windows 7 case-sensitive when it reads/writes to the C drive (and any other NTFS drive)?

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• Is an Ethernet point to point connection without a switch real time capable?

  - by funksoulbrother

  In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

  Read the article

• SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

  - by Rachel

  Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

  Read the article

• Setting up dovecot on OpenBSD

  - by Jonas Byström

  I'm a *nix n00b that just installed dovecot (the selection with no ldap, mysql or pgsql) on OpenBSD 4.0 and I want to set it up for imap use, but I'm having a hard time finding documentation that I can understand. It currently running on port 143 (checked with telnet) but from there I need to do the following: I need some accounts, the once already on the system are fine if I can get those running (seemed to be some dovecot option somehow?), or just adding a few manually is ok too. Was there some setting for this in the default /etc/dovecot.conf? passdb bsdauth {} is uncommented by default... I need to create imap folders, or subfolders. How can I do that? Hopefully not, but anything else I need to do? I want to run without certification validation and no SSL/TLS, would this work by default (client-side settings)?

  Read the article

• replace set of integers with respective string values

  - by Tripz

  I have a query which return the output like -- 5,4,6 Where 1 = apple, 2 = mango, 3 = banana, 4 = plum, 5 = cherry, 6 = kiwi etc. I would like to update my output as cherry,plum,kiwi instead of 5,4,6 How can I achieve that in the same select statment. I am okay to hard code the values. Please confirm May be I did explain clearly Here is the sample SELECT fruits FROM t_fruitid where id = 7 is returning me '5,6,4' as a single row Now I want to update this single row output as 'cherry,plum,kiwi' How do I do this Thanku

  Read the article

• Add colors to gif palete gimp

  - by Tomáš Zato

  When I open a GIF file in gimp, I find it very hard to add more colours then those that are already contained in GIF palette. When I draw with different colours, GIMP is trying to use the colour from palette most approximate to the colour I'm drawing. (may result in red instead of black) This problem persist even if I save the imported GIF as XCF file (even if I create new layers in it). How do I make gimp ignore the palette? The only solution was saving (exporting) the file as some non-palete image as BMP and then importing it again. Example : After flood fill (black)

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• Microsoft Outlook: show multi-day appointments as boxes in calendar day and week view

  - by Bernd

  I would like to show appointments spanning several days the same way as appintments within a single day. Single day appointments are shown with a white or colored box, covering the day horizontally. Multi-day appointments are shown in the day/week header and are indicated blue or purple on the left side of a day. This happens even if a multi-day appointment is not an all-day appointment (i.e. checkbox is off) and I have a start and end time. I frequently have a hard time seeing appointment overlaps wenn acceping single day appointments. Therefore I am looking for multi-day appointments shown the same way as single day appointments. I am on Outlook 2003.

  Read the article

• Book recommendation for learning server management and Apache

  - by japancheese

  Hello, I'm currently managing a site that I feel could be optimized and utilized to be much faster, however, I'm having difficulty finding reliable information to do it. I find the Apache documentation to be a hard read, and too technical about things I don't have a strong grasp on. I'm just looking for a good beginner/intermediate book about server administration to learn as much as possible about Apache, as well as how to create a nice secure, robust server that doesn't crash at the first hint of unusual traffic surges. Thanks to anyone who can point me in the right direction.

  Read the article

• Set Default Program for All Users on Server

  - by MattN

  I work with a large server environment that's running Windows Server 2003, 2008, and 2012 now on some boxes. We have a custom-built log viewer program that associates with two file types that I'd like to set to be the default program for all users across all boxes, so new users don't have to set the default program themselves on every box they log into. Ideally I'd like to have a simple registry script we could push out to all machines at once. I realize this likely means changing the registry entries for either HKCR or HKLM for the file extensions, but adding the program location with %1 extension to \shell\open\command value in HKLM simply opens the program and does not also load the log file. Am I just missing an open and play setting, or am I looking at this entirely wrong? (And I know the script will need to be different for 2003 and 2008, but changing the version for two scripts isn't hard) Thanks!

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >