Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 272/1206 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

  - by Marek L.

  I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

  Read the article

• Multicasting and multicast address

  - by Zia ur Rahman

  I have confusion about the multicast addresses, I have read an example which is given by. Suppose two applications have been built to send audio over a network. One application accepts and digitizes an audio input stream, and then sends the resulting frame across the network to other application. The second application receives the digitized audio from the network, converts it back to the audio signal and plays the result over a speaker. Unless the two applications use broadcast to send frames, no other computers on the network will receive a copy of the frame. Multicasting provides an excellent solution to the problems of allowing some computers to participate in audio transmission. To use multicasting , a multicast address must be chosen for the audio application. And the receiving application passes the multicast address to the network interface. The interface begins to accept the packets sent to that address. Question: how this multicast address is chosen, how the receiving application knows that the sender using this specific destination address for the audio frames.

  Read the article

• Frequent Disconnects with an Intel 3945ABG Wireless Card

  - by Alex Forsythe

  I'm brand new to Ubuntu, and I really love it so far, but one issue I have encountered is that my WLAN is disconnecting about every 5-10 minutes. Often times the connection is repaired automatically, but sometimes the network manager will repeatedly reject my encryption key (which of course is correct). Occasionally after a disconnect, the wireless network fails to show up at all. The only way I can solve this seems to be by completely restarting Ubuntu or connecting with a USB wireless adapter. I am using WPA/WPA2 encryption, which I've read can cause problems with network-manager, but I experience the exact same issues with WICD. I should probably note that I've not experienced any of these issues using Windows 7 on my other partition. I have a hunch that there may be a better driver out there for my card, but I have no idea how to go about searching for it or installing it. Any help would be really appreciated! lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric lspci -nnk 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:0201] Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Kernel driver in use: iwl3945 Kernel modules: iwl3945 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• How to make a DHCP server on virtual machine serves other virtual machines(on different physical machines)?

  - by Tony

  I'm building a virtual cluster with VirtualBox and Opensuse. I have 10 physical machines and need several vms on each. The virtual machines are supposed to be in a "private" network, but still have internet access. I was asked to set up a virtual head node working as DHCP server. I installed DHCP server on the virtual head node and it seems works. On VirtualBox I set 2 network adapters to the head node, one bridged adapter and one internal network. One vm on the same physical machine has been set nic as internal network adapter. The vm can get IP address (so DHCP works) but can't access internet. What should I do? Specifically, what network adapter should I choose for head-node and work-nodes in VirtualBox? What in the virtual machines should I do?

  Read the article

• Hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Setup dhcpd without gateway on purpose

  - by MBober

  I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

  Read the article

• What is the rationale behind snazzy Window Managers/Composers?

  - by Emanuele

  This is more of a generic question, based on trying out Window Managers like Awesome, Mate and others. To me looks like that other Window Managers like Gnome3 and/or Unity are heavy and pointless. I do understand that having all the composed UIs is more pleasant for the eye, but apart that, what are the other major benefits? To make an example, when I run the game Heroes of Newerth (using nVidia drivers) under: Unity : the FPS drops sharply Gnome3 : FPS is ok, but X and other processes use 15~20% of CPU and quite some additional memory Awesome : FPS is ok, and other processes use very little memory and CPU Below some numbers regarding what I'm saying (please note my system is 64 bit, AMD Phenom II X4, 8 GB RAM, nd nVidia 470 GTX, SSD disk). All data is sorted by mem usage (watch -d -n 10 "ps -e -o pcpu,pmem,pid,user,cmd --sort=-pmem | head -20"); again note that CPU time of ./hon-x86_64 might be different due to the fact I can't take the snapshot of the system during exactly same time. Awesome: %CPU %MEM PID USER CMD 91.8 21.6 3579 ema ./hon-x86_64 2.4 0.9 3223 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.6 0.4 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinp 0.3 0.2 3602 ema gnome-terminal 0.0 0.2 2698 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Gnome3: %CPU %MEM PID USER CMD 82.7 21.0 5528 ema ./hon-x86_64 17.7 1.7 5315 ema /usr/bin/gnome-shell 5.8 1.2 5062 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.0 0.4 5657 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.7 0.3 5331 ema nautilus -n 1.6 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- - 0.9 0.2 5451 ema gnome-terminal 0.1 0.2 5400 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Unity 3D: %CPU %MEM PID USER CMD 87.2 21.1 6554 ema ./hon-x86_64 10.7 2.6 6105 ema compiz 17.8 1.1 5842 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.3 0.9 6672 root /usr/bin/python /usr/sbin/aptd 0.4 0.4 6606 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.5 0.3 6115 ema nautilus -n 1.5 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinput -sasl errl 0.3 0.2 6180 ema /usr/lib/unity/unity-panel-service So my point is, what's the rationale behind going towards such heavy WMs/Composers?

  Read the article

• ralink rt2860 not working anymore in ubuntu 12.10

  - by greenit

  I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

  Read the article

• Unable to Upgrade from 13.04 to 13.10

  - by Mohit

  Following is what I get as error Error during update A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry. W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/main/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/restricted/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/universe/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/multiverse/source/Sources 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. Restoring original system state I am using command line "do-release-upgrade" I have changed my dns to google public dns and verified that using nslookup and host -v could not find bg.archive.ubuntu.com in any of the source list files. not only in that in another tab I have ping google running just to verify that network is not down. Network has no issues.

  Read the article

• supervisord failed to start nagiosapi after reboot, need to run reload manually

  - by Bajingan Keparat

  I have supervisord to start nagiosapi everytime the server starts. The API created a status dump file called status.dat, which will get updated periodically. The following is the conf file that starts the api. [program:nagapi] directory = /home/nagapi user = api command = /bin/bash -c "source /home/nagapi/.virtualenvs/nagapi/bin/activate; /home/nagapi/nagios-api/nagios-api" stdout_logfile = /home/nagapi/supervisor_nagios-api_stdout.log stderr_logfile = /home/nagapi/supervisor_nagios-api_stderr.log Everytime i restart the server, supervisord cannot start the api. stderr.log claims that it cannot find the status.dat file located in /var/cache/nagios3. It seems like the files was not created yet when supervisor tried to run the api the first time. I'm saying this because if i do a supervisorctl reload, everything would reload just fine, and the api would run ok about 50 seconds after the reload command completes. should i change the command option of the conf file to check for

  Read the article

• Cannot login other users since upgrade

  - by Jo Rijo

  I had 10.10 with 4 users and upgraded to 12.04.1 from CD. (in the installation options it detected I had 10.10 and windows installed and I chose the option to upgrade keeping users and their homes and all possible apps) Now the main user works fine but there where none of the other users, only their home directories, so I decided to create new users with the same names and seems to worked fine, there was no extra home directory created so I assume it linked the newly created user with the home directory of the same name, but I can't log in. It accepts the password goes black and takes me back to the login screen (lightDM) If I create a new user with a different name it works fine but then it creates it's own home directory.

  Read the article

• Symbolic link all files in directory to show in another directory?

  - by Thomas Clayson

  What I want is to be able to display all files that are ftp'd into /home/ftp in /srv/ftp /srv/ftp is password protected, and has files in it which I don't want to be accessible from the public ftp. So as such I wish that all files uploaded to /home/ftp are automatically symbolically linked (or otherwise) to /srv/ftp. Does this make sense? e.g. ls /srv/ftp: file.sh another.txt something_else.i386 then a user ftp's and drops a file in /home/ftp (or ssh, or whatever) ls /home/ftp: user_file.mk ls /srv/ftp: file.sh another.txt something_else.i386 user_file.mk I hope this makes sense. I have been told that this can probably be achieved using ln to create symbolic links, but I don't want to have to ssh in and create the links every time I (or someone else) puts files over ftp. Thanks! :)

  Read the article

• Unity Launcher only runs once - requires lightdm restart before it runs again

  - by Don

  I have an intermittent problem that just started showing up several days ago. I am running 11.10 and all updates are current. I first saw the symptom with a custom version of the "Home" nautilus-home.desktop file I created in ~/.local.share/applications. I added a few static shortcuts to specific folders. What I found was, clikcing the icon once would open up my home folder, but after closing that nautilus window, clicking the icon again did nothing (did not even show icon backlight animation). However, I could right click on the same icon and access my short cuts as many times as I want. Symptom persisted until restarting lightdm. Just yesterday I saw the same sort of symptom happen with a custom launcher I created for a chromium-borwser to open a specific URL (with a few short cuts to other URLs). Click the icon - it works once. Then never again. Right click the icon and I can use the short cuts over and over - no problem. Note - at one point I assumed I might have a problem with my custom .desktop file, so I did a test by removing my custom nautilus-home.desktop. However, even after restarting lightdm, and verifying the home icon was the standard one from /opt/share/applications (all my custom shortcuts were gone) I saw the same symptom re-appear - it runs once and then not again until restarting lightdm. It seems to be intermittent and seems to move between various launchers. Not sure what to do or even what background data to gather. Attempt to improve question after the first answer: I tried the following: 1) remove all custom launchers 2) reboot 3) add custom lauchers back 4) reboot 5) attempt to use .... still have "runs once and never again" symptom with several launchers

  Read the article

• Slow gvfs Samba Performance

  - by Wolfgang

  if I use/acces a Samba Share using Nautilus or manually using "gvfs-mount smb://SERVER-IP/Share" I get a poor Performance, only about 7 mb/s on my 100 Mbit Network. If I access the same Share on Windows I get Fullspeed 100 Mbit (About 11 mb/s), also if I mount using sudo mount -t cifs //SERVER-IP/Share /mountpount which uses cifs instead of gvfs I get fullspeed too, so can anyone tell me if there is a Performance Problem/Bug in gvfs or how gvfs is using SMB Shares differerently ? I tested read Perfomance (From my Network Samba Share) with multiples files and always, the cifs-Version is fullspeed and the GVFS-Version has some mb/s less. After some research I found some tips to optimize the Samba Settings of my Ubuntu Installation and some network tuning tips, but as the CIFS mounted share gets the full Network Speed I don't believe its that kind of problem.

  Read the article

• Securing Mobile Apps in a Bring Your Own Device World

  - by Naresh Persaud

  As more and more business users begin using their personal devices to access corporate information and resources, the number of network access requests has risen dramatically.  Access Management products and strategies that were based on an employee accessing network resources from a single desktop PC were never designed to monitor and manage an employee that is using a desktop and a laptop, a tablet, and a smartphone all from outside the corporate network, and possibly from an unsecured wireless public network. A new approach is needed to manage the types and frequency of mobile app access requests - an integrated Platform Approach to Identity and Access Management that is location and device aware, that can warn you of unusual or high risk access.  A platform that provides standard APIs so you can manage your mobile apps the same way that you manage your enterprise apps. View the slideshow below to see how the Oracle Identity Management platform can help you secure your mobile applications and data in a Bring Your Own Device World. Securing access inabyod-world-final-ext View more PowerPoint from OracleIDM

  Read the article

• Google analytics goal funnel visualization issues

  - by Lauren

  This is the goal funnel for checkout. Does anyone have any idea where the "/" is coming from? The cart page is at site: game on glove dot com (I don't want this stackoverflow page being indexed in google particularly well). Go to the site, click on the order button, make your selection, and click the button to enter the cart (it resolves to /Cart and /Shop-Cart). I believe I used the regular expression matching to match "cart". So why the "/" (I don't know what is causing the home page to reload when users are on the Cart page within a Colorbox lightbox where the only way back to home or "/" is to hit the exit button in the top right of the lightbox)? Here's my one guess for the former question but it doesn't seem likely: See the "check out with paypal" button? If you hovered over it, it does default to the home page which is what might be the "/"... but it really redirects the user to the paypal.com page so it shouldn't also load the home page.

  Read the article

• Changed username. Now I cannot log on or view my previous files

  - by Lauren

  I want to change my username and followed the instructions from How do I change my username? by creating a temp user with admin privileges. While logged in as temp, I did : sudo usermod -l newname oldname sudo usermod -d /home/newname -m newname Now I cannot log in under newname and /home only lists newname and temp Reading through other sites now, it seems I should have used usermod -d /home/newname -m oldname Based on this, I think I may have deleted the contents of my previous home folder?? I'm sure I'm not the first person to do some stupid while changing username, but any help is greatly appreciated. Thank you!

  Read the article

• not detecting wireless networks

  - by pac

  i'm a new linux user and i cannot add or edit any network connections, nor is the system detecting any wireless networks when i try to access additional hardware from system, it doesn't even open...so i'm stuck. lspci | grep -i wireless comes out with 06:0a.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network connection (rev 05) lspci -n -s 06:0a.0 comes out with 8086:4220. i dont know if that info was relevant but any help on this would be appreciated.

  Read the article

• No internet access when I'm connect to my company's VPN

  - by Iago

  I googled my problem and I've read some questions in Ask Ubuntu, but I didn't solve my problem. I connect to a PPTP VPN server and it works well, but when I'm connected to that VPN I don't have Internet access but private network access. If I check "Use this connection only for resources on its network", I have Internet access, but this way I haven't access to my company's private network. What's the problem? Help, please.

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Oracle Solaris Remote Lab (OSRL) Fact Sheet

  - by user13333379

  The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

  Read the article

• Oracle Solaris Remote Lab (OSRL) Fact Sheet

  - by user13333379

  The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

  Read the article

• App installed in ~/usr launches from terminal but not Applications menu (or why does setting ld_library_path in .profile not work as it should)

  - by levesque

  I have built and installed an application under a directory of my choosing, let's say under /home/jim/usr, so files have been put in three-four folders, all under this $HOME/usr folder (e.g., bin, include, lib, share, etc.). I can launch this application from the command line just fine as I added the proper paths to my environement variables PATH and LD_LIBRARY_PATH in ~/.bashrc. I added the same paths to the ~/.profile file, which, if I'm not mistaken, is supposed to be parsed by Ubuntu. Doesn't work. Nothing. Where can I go from there? EDIT: I logged out/in and restarted my computer. Both didn't change a thing. The problem seems to come from the fact that no matter what I do the LD_LIBRARY_PATH environment variable is not properly passed to Ubuntu. Using log files, I found that the application I'm trying to run in this example doesn't find one it's dependencies located in ~/usr/lib. One solution would be to add the /home/jim/usr/lib folder inside a file located in /etc/ld.so.conf.d/, but I don't have admin rights on this machine. Making a wrapper script like this one works: #!/bin/bash export LD_LIBRARY_PATH=$HLOC/usr/lib application &> $HOME/application_messages.log but that would force me to wrap all my home compiled applications with this script. Any ideas? Why does Ubuntu/Gnome remove the LD_LIBRARY_PATH environment variable from my set variables? Is it because trying to do this is bad practice? UPDATE (and solution): As found by Christopher, there is a bug report about this on launchpad. LD_LIBRARY_PATH is unset after parsing of the ~/.profile file. See the bug report. Seems the only solution for now is to make a wrapper script.

  Read the article

• Can't connect to or see my wifi ssid

  - by ant

  Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >