Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 273/1008 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• installing Ubuntu 32 bit and Lubuntu 64 bit with the same home directories

  - by rakesh

  Mine is a 64 bit machine and I had installed "32" bit Ubuntu to try it out and hence installed many apps and developed many things and configured it for many things. Now it seems that my laptop needs more resources as my development needs so much. My question is :to free up install Lubuntu "64" bit in other partition which uses the same home directory and apps and my development rendering my laptop to be faster than before. Is this possible ? Thanks in Advance.

  Read the article

• SSH password entered too many times Connection refused

  - by Ole Henrik Skogstrøm

  I tried connecting to my new installed Ubuntu 12 server via SSH and I was asked for my password. (I had used "myusername@ipadress" to connect) After entering the right password a few times (with no luck; access denied) I started getting an error directly telling me that the connection was refused without asking me for a password anymore. It seems like I have managed to blacklist myself. It has been like this for about 2 hours now, is there a quick solution for this?

  Read the article

• Max ram for computer 16GB or 8GB

  - by Laptop memory question

  Manufacturer's specifications for my notebook say memory can be extended from 4GB to 8GB. Whereas, running sudo dmidecode suggests the computer can use 16GB as below: Handle 0x0037, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Which one is correct?

  Read the article

• Error trying to install the Java SDK

  - by Ray

  I need to install the Java 6 SDK, but after running this: sudo apt-get install sun-java6-jdk sun-java6-jre sun-java6-source I end up with this: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: sun-java6-jdk : Depends: sun-java6-bin (>= 6.26-1lucid1) but it is not going to be installed sun-java6-jre : Depends: sun-java6-bin (>= 6.26-1lucid1) but it is not going to be installed or ia32-sun-java6-bin (>= 6.26-1lucid1) but it is not installable Recommends: gsfonts-x11 but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I'm quite new to Ubuntu and need the packages for my course. I guess they've become corrupted but, how can I fix this?

  Read the article

• VPN says "successfully connected" and I'm internet-connected, but I can't access network resources

  - by Al S.

  To explain, I'm a university student who uses the VPN to access sites like Nature, PhysicsToday, etc. I have this VPN working on Windows 7 and I've got access to nearly every journal. However on my Ubuntu 12.04 partition I'm able to connect to the internet (in fact I'm typing this while connected through the VPN presumably) but journals have locked me out. Is there a problem on my end that I can fix?

  Read the article

• Is installing Ubuntu 10.10 still a viable option?

  - by Kartik Anand

  I fell in love with ubuntu when 10.10 was released. It was the perfect OS for me, but then, the 11 and the 12 series came, and I starting hating it (Pun intended) But seriously, I want to stick to ubuntu 10.10, I have the .iso file with me. I want to go ahead and install it. My question is, since its not currently supported, what problems will I face? Will I be eligible for update? I mean atleast till the time it was supported Can I somehow get security updates and patches Will the latest software available still run on ubuntu 10.10 I don't care much about drivers, as much as I care about python, php, apache, wine and other softwares. Will the software center work?and be updates as well? What issues am I most prone to face?

  Read the article

• Purpose of /run/lock/ (empty except for ./whoopsie/)

  - by Aeyoun

  My /run/lock/ directory is empty except for ./whoopsie/. I have understood /run/lock/ as a replacement for /var/lock/ but was surprised to find it entirely empty. Is whoopsie meant as a deterrent from using this directory? I did find other lock files under /run/, though. Most notably in /run/user/<me>/. I would have expect per-users lock files in /run/lock/user/ and not in a separate directory. Hoping for some clarification!

  Read the article

• Xubuntu is not seeing my Win8 OS in the installer

  - by Logan Serman

  When I install Xubuntu, I get the message "This computer currently has no detected operating systems. What would you like to do?". I just did a fresh install of Win8 yesterday, and I guess it used EFI because I have a 104MB partition that is of type 'efi'. Is there any way to install Xubuntu next to Win8, and avoid any boot problems? Or can I switch Win8 to BIOS from EFI, without having to re-install Windows? I went through a ton of boot problems and re-installing yesterday... I really don't want to have to do it again.

  Read the article

• Fails to boot after upgrade, stuck on winbind package

  - by Praetorian

  I started the upgrade from 11.04 to 11.10 last night. Once it got the installing packages part I left the computer unattended the rest of the night. When I checked it this morning the screen was blank and I couldn't get it to turn on. So I cycled power, and now I get the "Ubuntu 11.10" screen with the dots underneath, but then it gets to a blank screen and nothing more. I can get to the command line in recovery mode; here's a list of the things I've tried so far sudo apt-get update - the very first repository it checked sat at 0% for a long time (network cable is plugged in), so I cancelled with Ctrl+C Thought it might be a problem with display drivers, so I tried sudo apt-get install nvidia-glx - this gave me an error saying dpkg has been interrupted, manually run sudo dpkg --configure -a sudo dpkg --configure -a this installed / updated a bunch of stuff but got stuck at Starting Winbind daemon winbind Restarted and tried sudo dpkg --configure -a again but it gets stuck at same Windbind step What else can I do to fix this problem?

  Read the article

• Is there a Source Insight alternative?

  - by hansioux

  I am not a developer, but for my work I trace a lot of codes. It is actually rather difficult reading other people's code, especially for bigger projects. Source Insight is a great application that stores all the symbols in a data base, so you can see a new function being called, click on it and see how the function is written. You can see all the referrer of a object or jump to a caller. You don't need to break the train of thought and think up shell commands just to find these things every time you ran into a new variable/structure/function from some other files. I have it running on WINE, but there are little glitches that sometimes gets in the way. I know people will mention C-scope, I've tried it, but it really isn't the same. So, with so many huge open source projects out there for Ubuntu, are there native tools to help read them efficiently? EDIT: Thanks for the suggestions, but does CODE::BLOCKS or CodeLite provide abilities to see the function that the mouse clicked on without jumping to it, so I can see the caller and callee at the same time?

  Read the article

• Intel Fortran error #10001

  - by Ricardo

  I have a problem with the Intel Fortran compiler. It has been working fine in 8.04 and 10.04 LTS (well, some changes required during the installation due to the fact that 10.04 uses dash and not bash as the shell /bin/sh) Now I have upgraded to 12.04 and when compiling I get the following message: ifort: error #10001: could not find directory in which g++ resides Is there anybody that knows how to solve this problem?

  Read the article

• gsm-ussd gives device busy or error (100)

  - by mydoghasworms

  I am using gsm-ussd to try and query my data balance from my 3G modem. When I issue the commands gsm-ussd -m /dev/ttyUSB0 '*188#' or gsm-ussd -m /dev/ttyUSB2 '*188#' I get either "Device or resource busy" (when it is in used and connected) or "Unknown error (100)". My device (Huawei E173) seems to create 3 devices in /dev, namely ttyUSB0, ttyUSB1 and ttyUSB2. None of them work, and ttyUSB1 gives a somewhat different problem, as it just give the following message: * Wrong modem device (use -m <dev>)? * Modem broken (no reaction to AT)

  Read the article

• Brother MFC-J470DW scan function "Check Connection"

  - by user292599

  I have a Brother MFC-J470DW printer that I have connected to a Linux desktop (running Ubuntu 14.04) using a wireless router network. The printer works fine for printing and copying, but now I want to add the scan function. To set up the scan function, I went to the Brother web page for this printer: http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&os=128 and under Scanner Drivers selected "Scanner driver 64bit (deb package)", "Scan-key-tool 64bit (deb package)", and "Scanner Setting file (deb package)". For each package, I clicked the EULA, and selected "open with Ubuntu Software Center". Then after the USC window pops up, I click on Install and the red line goes from left to right. In each case, the USC window then had a green checkmark and the Install box changes to Reinstall (that's how you know it worked). So now I try it out. Hitting the Scan button on the printer, selecting "Scan to file", and hitting ok produces the message "Check Connection". I checked the Brother Linux Information FAQ (scanner) page and the 14th question seems the same as mine: When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I can not select anything except "scan to FTP". I explored the solution given for this FAQ, but found from ifconfig that I am already using eth0, the default setting, so presumably that is not the problem. I also found brscan-skey installed in /usr/bin and did drrm@drrmlinux2:~$ brscan-skey -t drrm@drrmlinux2:~$ brscan-skey but that didn't help - I still get the "Check connection" message. What can you suggest to fix this problem?

  Read the article

• Nginx Subdomain Problem

  - by user292299

  i can't access my subdomain on localhost. my localdomain is localhost.dev and it's work.but i want to auto subdomain for php script (username.localhost.dev) i try this server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev ***.localhost.dev**; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } it's not working.i change server_name for testing server_name localhost.dev asd.localhost.dev; i can't access asd.localhost.dev and i try this double server{} section # You may add here your # server { # ... # } # statements for each of your virtual hosts to this file ## # You should look at the following URL's in order to grasp a solid understanding # of Nginx configuration files in order to fully unleash the power of Nginx. # http://wiki.nginx.org/Pitfalls # http://wiki.nginx.org/QuickStart # http://wiki.nginx.org/Configuration # # Generally, you will want to move this file somewhere, and start with a clean # file but keep this around for reference. Or just disable in sites-enabled. # # Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples. ## server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } ############################### server { access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name asd.localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ =404; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ =404; # } #} i can't success

  Read the article

• Folder missing in external hard drive

  - by Hans

  I have been backing up my folders, I am using Seagate Expansion portable Drive. I had created a folder called "|o|o" in the root folder of the portable drive... I copied my latest folders into "|o|o" folder to re-install ubuntu. When I open the portable drive the folder |o|o is not visible, when I ctrl+a and check properties the space used is 122GB, however when I click on the drive to view properties of the drive used space is 260GB. It looks as if the folder is there in the portable drive but I cannot access it... I have tried to view all the hidden files and "|o|o" is still not there. I am using 12.04.Can you please help me to retrieve this folder.

  Read the article

• Hash Sum mismatch on python-keyring

  - by Gearoid Murphy

  I came in to my workstation this morning to find an apt error notification relating to a hash sum mismatch on the python keyring password storage mechanism, given the sensitive nature of this package, this gives me some cause for concern. Has anyone else seen this error?, how can I ensure that my system has not been compromised? Failed to fetch http://gb.archive.ubuntu.com/ubuntu/pool/main/p/python-keyring/python-keyring_0.9.2-0ubuntu0.12.04.2_all.deb Hash Sum mismatch Xubuntu 11.04 AMD64

  Read the article

• Why would 70-persistent-net.rules have no effect?

  - by Wes Felter

  I've got a saucy server with a lot of NICs and they end up with weird names like "rename19". I know interface names can be changed by modifying the /etc/udev/rules.d/70-persistent-net.rules file. The first clue that something is wrong is that that file did not exist even though it's supposed to be created automatically. So I decided to write my own based on advice from Linux From Scratch: ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.0", NAME="eth0" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.1", NAME="eth1" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.2", NAME="eth2" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.3", NAME="eth3" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:0c:00.0", NAME="mezz0" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:0c:00.1", NAME="mezz1" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:1b:00.0", NAME="slot1a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:1b:00.1", NAME="slot1b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:20:00.0", NAME="slot2a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:20:00.1", NAME="slot2b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:11:00.0", NAME="slot3a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:11:00.1", NAME="slot3b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:8b:00.0", NAME="slot4a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:8b:00.1", NAME="slot4b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:90:00.0", NAME="slot5a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:90:00.1", NAME="slot5b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:95:00.0", NAME="slot6a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:95:00.1", NAME="slot6b" (I'm matching on PCI IDs instead of MAC addresses because I have multiple identical machines that I want to apply this configuration to.) After rebooting, nothing has changed. It's like these rules aren't even being read. There's not much going on in dmesg either: $ dmesg | grep udev [ 3.196629] systemd-udevd[323]: starting version 204 [ 6.719140] systemd-udevd[550]: starting version 204 [ 38.695050] init: udev-fallback-graphics main process (1658) terminated with status 1

  Read the article

• Dell Synaptics touchpad's middle mouse button gets mapped as normal click

  - by Henrik

  How do I make the middle touchpad's button work? xinput --test 11 yields button press 1 button press 1 For pressing both the left and the middle button. I have tried to do xinput set-button-map 11 1 4 2 and so on, but as the --test shows that button 1 is being depressed, then probably the issue is at a lower level than with X11's perception of what mouse buttons I'm pressing (or assigning button-map 11 1 2 3 and clicking the right button in firefox, wouldn't trigger the middle-click on the link)

  Read the article

• Terminal will not accept password / terminale non accetta password

  - by elvizz67

  Translation, by Google Translate: I just installed lxde Lubuntu errrato and a terminal command I locked the package management and updates, after erasing software from sources I typed the wrong command sudo apt-get upgrade pero'il terminal asks me the password and the keyboard is not me accept any command. What should I do to unlock? Original text: Ho appena installato lubuntu lxde e per una errrato comando il terminale mi ha bloccato la gestione pacchetti e aggiornamenti, dopo avere cancellato dalle fonti software il comando sbagliato ho digitato sudo apt-get upgrade pero'il terminale mi chiede la password e la tastiera non mi accetta nessun comando. cosa devo fare per sbloccare ?

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Overheating on Dell Studio XPS 1645

  - by pjtatlow

  So I was wondering if anyone else has come upon this problem, and/or has come up with a solution. When I use my Ubuntu partition, my computer becomes extremely hot, and the fan runs very noisily for a very long time. If I reboot into windows while this is happening, my computer actually begins to cool down while doing the exact same tasks. Thinking this might just be a bug with Ubuntu, I installed fedora on another partition, and the same problem occurs. Is this a problem with the kernel? Cpufreq tells me that my CPU is running at 933 MHz out of a possible 1.6 GHz from my Intel Core i7 CPU Q70. For anyone who wants more information, I have 8 GB of memory, and an ATI Mobility Raedon HD 5730 Graphics Card. I'm open to any ideas anyone might have. Thanks in advance!

  Read the article

• Consoles in Ubuntu and automatic upgrade

  - by Muhammad Khan

  So I recently discovered that ubuntu is simultaneously running 6 consoles in addition to the GUI that everybody uses, which can be accessed by pressing Ctrl+Alt+F1 ... +F6 and then the default GUI with Ctrl+Alt+F7. What use can these consoles have when I can just open a terminal in the GUI mode? Also, why is having consoles like this advantageous for computer users; wouldn't a GUI be much more simplistic? Also, running the console told me that I was running a development version of Ubuntu Quantal which is version 12.10. The login screen (correctly?) says that I'm running 12.04 LTS. What does that mean? Thanks everybody!

  Read the article

• Terminal line glitches

  - by foxy

  I installed Ubuntu 11.10 mini + LXDE and wanted to make my command line different in terminal (than just plain white), so I added blue color to path line (everything until $ sign) and it works fine but I have two strange glitches now: When i write a line which is longer than terminal window, instead of starting at next line it starts at the same one, overwriting everything which was in there. Sometimes while navigating over previous commands (up/down arrow keys) some part of command gets stuck and is treated as part of prompt (the blue text), but it is white and is non-deletable and is not taken as part of command when i press enter. What could I mess up? The bad thing is that I don't remember what exactly did I change, but i'm sure I changed only one line in bashrc

  Read the article

• Claiming the provisioned storage

  - by gita

  I created a ubuntu server vm with 64GB provisioned storage. I remember that I specified 30GB to be used for the vm. When I do df -h, I get Filesystem Size Used Avail Use% Mounted on /dev/mapper/analysis--db-root<br/> 28G 25G 904M 97% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 793M 228K 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 0 2.0G 0% /run/shm /dev/sda1 228M 45M 171M 21% /boot The disk is almost full, how can I use my other 30GB from the provisioned storage?

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >