Search Results

Search found 10936 results on 438 pages for 'monitor refresh rate'.

Page 274/438 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• How can I stop my laptop display from flickering when I connect my TV?

  - by Lord Torgamus

  I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

  Read the article

• nVidia Control Panel Won't Recognize SLI

  - by Nakaan

  So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

  Read the article

• Sharepoint Services 3.0: 403 Forbidden fun

  - by gravyface

  Can't get to the Administration or the "companyweb" site itself; was working up to a week ago. Old threads, blog posts, etc. indicate that there was an issue with a KB update but was resolved when .NET Framework 2.0 SP1 was deployed/installed. Running Process Monitor, I can see a lot of PATH NOT FOUND','NAME NOT FOUND for c:\inetpub\companyweb\Default.aspx, \_themes\ice\...\foo.css, etc. for the w3wp.exe process on CreateFileorQueryOpenoperations. These files do not exist in the location specified. I don't recall these files actually existing in that folder, but I believe they're "created" when requested, pulled in from Common Files/Shared or whatever, in typically-awesome Microsoft Web architecture land (</rant>). Besides reinstalling (which I'm sure will be as much fun as migrating from one server to another was), anyone know what's going on? Google-fu has alluded me.

  Read the article

• [Python] Detect destination of shortened, or "tiny" url

  - by conradlee

  I have just scraped a bunch of Google Buzz data, and I want to know which Buzz posts reference the same news articles. The problem is that many of the links in these posts have been modified by URL shorteners, so it could be the case that many distinct shortened URLs actually all point to the same news article. Given that I have millions of posts, what is the most efficient way (preferably in python) for me to detect whether a url is a shortened URL (from any of the many URL shortening services, or at least the largest) Find the "destination" of the shortened url, i.e., the long, original version of the shortened URL. Does anyone know if the URL shorteners impose strict request rate limits? If I keep this down to 100/second (all coming form the same IP address), do you think I'll run into trouble?

  Read the article

• Document.ready() failing on popup

  - by Seth Duncan

  I am using ASP.Net and jQuery/jQuery UI and I am trying to use the datepicker control. It works fine on every page, except when I have to use the popup (to add new data into the database and then i refresh the current page to reflect the new data being entered). It seems that document.ready() is failing when I use the popup. I can invoke the datepicker control manually with adding a click event to fire off the showcalendar function, however I want to try and make it work. Does anyone have any ideas of why a popup would fail document.ready() ? Thanks!

  Read the article

• Thomson TG585v7 router - promiscuous mode

  - by Nikita

  I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

  Read the article

• Toolkit & Habits for Linux Network & System Administration [closed]

  - by slashmais

  I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

  Read the article

• Saving a Word document as Web Page, Filtered drastically reduces image resolution

  - by Abdullah Jibaly

  I have a document with hundreds of images. When I save the first image (right click and save picture) it ends up with a good resolution as shown below: However, when I save the document as Web Page, Filtered, all the images end up really low-res. Here's the exact same image afterwards: I've tried the following options in the Save As dialog with no luck: In Tools > Web Options... > Pictures > Target Monitor I've set the Pixels Per Inch to the highest value, 120. In Tools > Compress Pictures > Target Output I've set it to Print (220 ppi). Any ideas would be appreciated.

  Read the article

• How to show scrollbars in TScrollBox after it has been made visible again?

  - by aleluja

  Hi, I've ran into one small problem. I am dynamicaly generating some controls and place them on a TScrollbox component. But i noticed that if scrollbox is visible, user can clearly see each of the controls being created and placed. So it looksl ike lots of work is being done and it is slow. I hid the scrollbox and generated all the controls on it, which took much less time and no flickering and alike. But here's the problem. When i unhide the scrollbox, its' scrollbar doesn't appear untill i actually resize the form. (The alignment of scrollbox is alClient) Any ideas on how to fix this? Tried repainting, but it didn't work. Refresh didn't work either. Thank you

  Read the article

• Ending php sessions for debugging purposes

  - by Bill Zimmerman

  Hi, This might be very easy to do, but I haven't been able to figure it out. Basically, I have a loosely couple web-app written in python and php. The python code uses PHP sessions (generated from the PHP app when the user logs in) to check if the user is logged in/has permission to access the given python resource. My question is this: What is the easiest way to force all active sessions to timeout. I would like to do this for debugging purposes, to test out the python code. I tried changing the session.max_lifetime PHP variable, but that still doesn't guarantee that the session has ended and is removed. I tried just deleting the file, but this seems to cause problems (when i refresh the php page, errors show up in my apache logs and it won't reload quickly) Any ideas?

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

• Macbook optical drive blocked

  - by milse

  The optical drive on my Macbook seems to have some sort of blockage. When I try to insert a disk the disk seems to be hitting something inside the drive on the right side (the side nearer the monitor). Thus disks do not fit into the drive. This problem occurred a few weeks ago, but then miraculously fixed itself. It felt like I had managed to maneuver the disk over the blockage. Now the blockage is back and I can't get any disks into the drive again. Anyone ever encountered this problem before? I probably need to open up my Macbook, huh.

  Read the article

• Can I import sql with php?

  - by shin

  Please bear with me(beginner). I am planning to set up an application where visitors can login and play/mess around with my application. So I want to refresh my php application once a day with a cron job. But I never wrote a cron job script before. I understand that I have to truncate all the tables/data and add the initial data. With phpmyadmin, I can import data. Is there any way I can import sql file after truncate the tables? What is the best way? Do I have to create table and insert all data? Help and resources will be appreciated. Thanks in advance.

  Read the article

• Supervisor VS cronjob

  - by Guandalino

  Actually I'm using supervisor to monitor a process and restart it when it stops for some reason. The problem is that in case of a supervisor crash the process stops get monitored. So I thought to schedule a cronjob to check supervisor is running, and eventually restart it. The next thing I'm considering is to get rid of supervisor and check my process directly from the cronjob. I read that sometimes supervisor uses too much memory (to be verified, though). What are the pros in having supervisor VS cronjob monitoring the process?

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• configure Heartbeat on Centos Linux - error message

  - by Elad Dotan

  I installed Heartbeat on my Centos Linux and it seems to partially work..but I'm trying to monitor a service with no success. only when I reboot the main server the backup server takes over. in the logs I get : heartbeat[30476]: 2012/03/20_18:51:57 WARN: string2msg_ll: node [node1] failed authentication heartbeat[30476]: 2012/03/20_18:51:58 WARN: string2msg_ll: node [node02] failed authentication the authkeys is identical (copied from one to another). this is my ha.cf: logfile /var/log/ha-log logfacility local0 keepalive 2 deadtime 30 initdead 120 bcast eth0 udpport 694 auto_failback on node server01.com node server02.com haresources : server01.com 38.108.117.3 aim chat any idea how to fix the problem so if a service stops the other server take over Thanks! E.

  Read the article

• Error Message function

  - by jasmine

  I am trying to insert messages to a function function addMessage($item) { if ($result) { $message = '<p class="ok"> <span> Item added </span> </p> '; header("Refresh: 2; url=?page=$item"); } else{ $message = '<p class=not><span>There is an error blah blah</span></p>'; } return $message; } When I use it : addMessage('contents') it only returns to second condition. How can I fix this?

  Read the article

• Need Recommendations: Network Software and Hardware Setup for small firm

  - by Rogue

  Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

  Read the article

• Background search for changes in TFS source control

  - by qntmfred

  SourceGear Vault's client app has the ability to background search for changes. This is very useful because at any time I can take a quick peek and see what changes my team members have checked in and that I need to get latest on. This is also helpful for previewing any merges that might be necessary. And on a day to day basis, it helps me get a sense of what parts of the codebase are seeing the most churn. Is there a way to get this same functionality with Team Foundation Server, either with native features or a plugin? I know there is a Compare feature, but it takes way too long to be useful. Unless it could periodically refresh itself like Vault does, but I haven't found a way to do that. Anything new with Visual Studio 2010?

  Read the article

• Dojo load time extremely slow on iis

  - by Josh

  I am currently working on a project that is using Dojo as the js framework. Its a rather rich ui and as such is using (and thus loading) a lot of different .js files for the dojo plug-ins When run on an apache server running on a mac, the files (all around 1k) are served very quickly (1 or 2 ms) and the page loads pretty fast (<5 seconds) When run on IIS on Win 7, the files are served at an unbelievably slow rate (150ms - 1s), thus causing the page to take up to 3 minutes to load. I have searched the internet to try to find a solution and have come up empty. Anyone have any ideas?

  Read the article

• How to use Application.OnTime to call a macro at a set time everyday, without having to close workbook

  - by Shayne K

  I have written a macro that uses Application.OnTime that works if I manually execute the macro. I'm trying to automate this process so I don't have to write Application.OnTime in "This Workbook" or (Private Sub Workbook_Open() Most of you do this because you can have windows scheduler open the workbook at a certain time which starts the macros on open. I CANNOT USE SCHEDULER. Because I am not able to use windows scheduler I will keep the workbook open and the timer should refresh my data then Call "my Macro" at a certain time everyday. Where do I place this code, and how do I set an auto timer?

  Read the article

• jqGrid editForm problem

  - by PaulStanek

  Hi, I have simply jqgrid definitions like this: jQuery("#C2").jqGrid({ url: '/Customers.mvc/GetGridData/', datatype: 'json', autowidth: 'true', mtype: 'GET', colNames: ['Nazwa', 'Symbol', 'Status', 'Miasto', 'Ulica', 'Budynek', 'Mieszkanie', 'Koda pocztowy', 'Domena', ' '], colModel: [ { name: 'Name', index: 'Name', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Symbol', index: 'Symbol', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Status', index: 'Status', align: 'left', editable: 'true', edittype: 'text' }, { name: 'City', index: 'City', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Street', index: 'Street', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Building', index: 'Building', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Flat', index: 'Flat', align: 'left', editable: 'true', edittype: 'text'}, { name: 'PostalCode', index: 'PostalCode', align: 'left', editable: 'true', edittype: 'text' }, { name: 'Domain', index: 'Domain', align: 'left', editable: 'true', edittype: 'text'}, { name: 'ExtId', index: 'ExtId', align: 'left', editable: 'true', edittype: 'text'}, ], pager: jQuery('#C2_p'), rowNum: 30, rowList: [20, 30, 50], sortname: 'Name', sortorder: 'Asc', viewrecords: 'true', width: '80%', height: '100%', editurl: '/Customers.mvc/SaveCustomer/', postData: { gridId: 'Customers' }, caption: 'Klienci2' }).navGrid('#C2_p', { edit: true, add: true, del: true, search: false, refresh: false }, {},//Options for the Edit Dialog {},//Options for the Add Dialog {}//Options for D ); }); And when i call edit/add form it's appears without text edit inputs. I'm using jquery 1.3.2 and jqgrid 3.6.4 Any help will be appreciated.

  Read the article

• A PDF viewer for large margins in fullscreen

  - by jmn

  I am looking for a way to pleasantly read PDF files on my widescreen (22" 1680x1050) monitor. My problem with all pdf the PDF-viewer applications I have tried is that they do not handle wide and high margins well. If I go to fullscreen mode in my viewer and zoom in so that the extra margins are cropped, I can view the pages nicely, the annoyance however is that I have to reposition the pages every time I navigate to another page. I am sure there must be a way to make a PDF viewer that can solve this problem and perhaps there is one you know of? I am aware of something called PDF Reflow in Acrobat Reader but that only works with certain specific (tagged) files. I want a PDF viewer with a smarter zoom/next page function or an automatic margin-crop function. Is there such a thing?

  Read the article

• Delphi Search Edit Component

  - by Reber

  Hi, I need a delphi component for Delphi 2007 win32 that have features like Google search text box. ** While User writing search key it should fill/refresh the list with values, and user can select one of them. **User can go up and down list and can select one of them. **List should contain codes and text pair, so user can select text and I can get code for database operations. (Google can highlight the search text in List but I think it is not possible with Delphi 2007, so it is not excepted.) I tried Dev Express TcxMRUEdit, however it doesn't meet my needs

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >