Search Results

Search found 34186 results on 1368 pages for 'single machine'.

Page 274/1368 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Why does my PC successfully boot only when unplugged for more than a few minutes?

  - by philg

  I have an HP Pavilion Elite desktop computer, model HPE-490t. I like it because it didn’t cost too much, boots itself from an SSD, came with 16 GB of RAM, and has 6 CPU cores for editing video and camera RAW images. It has one behavioral quirk that I cannot explain, however. The recent power interruptions here in the Northeast got the machine into a state where it could not be restarted. It would power up for a second or two, shut down, and then power up again, never being able to get to the point of showing anything on the monitor. I unplugged it for about 10 seconds and plugged it back in. Same behavior (fails to boot). I unplugged it and walked away for an hour, then plugged it back in and it worked perfectly! I think something similar happened after installing a second hard disk drive into this machine. So the question is why does the computer behave differently depending on how long it has been unplugged? Where is energy stored that affects the machine’s ability to boot? Capacitors in the power supply? Battery on the motherboard (there is one for the clock, but that wouldn’t be exhausted by being unplugged for an hour, I don’t think)?

  Read the article

• mount multiple folders with nfs4 on centos

  - by microchasm

  I'm trying to get nfs4 working here. Machine 1 (server) I have a folder and in it 2 other folders I'm trying to share independently. /shared/folder1 /shared/folder2 Problem is, I can't seem to figure out how to mount the folders independently on the client. (Machine 1 - server) /etc/exports: /var/shared/folder1 192.168.200.101(rw,fsid=0,sync) /var/shared/folder2 192.168.200.101(rw,fsid=0,sync) ... exportfs -ra (Machine 2 - client) /etc/fstab: 192.168.200.201:/folder1/ /home/nfsmnt/folder1 nfs4 rw 0 0 ... mount /home/nfsmnt/folder1 mount.nfs4: 192.168.200.201:/folder1/ failed, reason given by server: No such file or directory The folder is there. I'm positive. I think there is something simple I'm missing, but I'm totally missing it. It seems like there should be a way in fstab to tell nfs which folder on the server I want to mount. But I can only find references to what looks like a root mount point (e.g. 192.168.1.1:/) which I assume is handled by exports on the server. But even with the folders set up in exports, there doesn't seem to be an apparent way to pich and choose which gets mounted. Is it not possible to mount separate folders from the same server to different mount points on the client? Any help appreciated.

  Read the article

• How to organise storage for media content such as video and music?

  - by thor

  Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

  Read the article

• Why do I need to set up Autologon values in registry twice before it works and can i fix this?

  - by jJack

  Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however.

  Read the article

• Hardware freeze during disk activity

  - by Thomi

  I built myself a linux-based NAS. It has several drives of various sizes and ages in an LVM configuration, with 800GB or so of data. The data is served using a simple samba server. This was working flawlessly, but after physically moving it, it has developed a strange fault: Whenever I do something on the server to cause disk activity, the entire machine freezes hard. This has the effect of killing any open network connections to the box, and generally making it useless. If I leave the machine for a few minutes it seems to come right again, but obviously this isn't really a solution. There are no error or warning messages in syslog, or the kernel logs. If I power the machine on, and leave it, it runs for several days without locking up. After that time I stopped testing. It doesn't freeze instantly - obviously it doesn't freeze while booting, and I can normally log in via SSH and start poking around in a few log files for a couple of minutes before it dies. My question is: What diagnostic tests can I run to determine the casuse?

  Read the article

• Screen occasionally flashes black when under load, sometimes does not recover

  - by Oak

  I've built a brand new machine, but to my horror my monitor occasionally flashes black for around a second, then returning to normal. This happens under load (watching videos / playing games) but only sometimes; e.g. it doesn't occur in "Batman: Arkham City" but does in "XCOM: Enemy Unknown". When watching videos, it also occurs when not watching them full-screen, and it sometimes even occurs when the machine isn't doing anything, just sitting at the desktop and moving the mouse around. Has anyone ran into this problem and knows of any solution? Additionally, sometimes after the black screen, it won't return to normal, instead turning completely corrupt. In these cases even quitting the application doesn't help, but physically disconnecting and reconnecting the monitor fixes the problem. This problem did not occur on my earlier machine which used the same physical monitor. Additional details: Windows Server 2012, configured as Windows 8, with latest updates installed NVIDIA GeForce GTX 660 Ti, with latest driver installed Ample amounts of CPU and RAM for playing the above games and for watching videos. I've read about similar problems elsewhere but could not find a working solution: http://www.youtube.com/watch?v=Zt00C-HXFbA&noredirect=1 http://www.sevenforums.com/hardware-devices/59126-monitor-flashing-black.html https://eu.battle.net/d3/en/forum/topic/4079098908?page=4 http://www.tomshardware.com/forum/347422-33-screen-flickering-black-nvidia-driver-update

  Read the article

• DVI splitter not working as expected/confusion between DVI-D and -I

  - by Freakishly

  Hey guys, thanks for looking. I have an ATI FirePro™ V3700 in my desktop machine, and I have been running a dual-monitor setup quite effortlessly, thanks to the two DVI ports on the card. I came upon a third monitor, and wanted to extend my desktop to 3 screens, so I purchased a DVI splitter from Amazon. Now, I can only duplicate the second monitor onto the third, not extend it. I've tried all possible combinations of input to no avail. Here's the setup: The ATI FirePro™ V3700 has two Dual-Link DVI-I outputs The splitter splits a single Dual-Link DVI-I port into two Dual-Link DVI-I outputs Two of the monitors are NEC E222W, and the third monitor is a Dell 2001FP. Each monitor has one D-Sub and one Dual-Link DVI-D input. Cables going from the video card to the monitors are two Dual-Link DVI-D to the NECs and one Single-Link DVI-D to the Dell. Is the problem likely with the DVI-D/DVI-I mismatch? Or is it with the cable on the Dell that is only a Single-Link? The cables are easily replaceable, the monitors not so much. Thanks for your time, I really appreciate it. http://www.amd.com/us/products/workstation/graphics/ati-firepro-3d/v3700/Pages/v3700-specs.aspx http://www.amazon.com/Cables-Unlimited-DVI-D-Splitter-PCM-2260/product-reviews/B000H09RFM/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 www dot newegg dot com/Product/Product.aspx?Item=N82E16824002495 accessories dot us dot dell dot com/sna/PopupProductDetail.aspx?cs=19&l=en&c=us&sku=320-1578 Apologies for the fudged links, I'm new here and they won't let me post more than two :P

  Read the article

• Migrate Maildir between courier and dovecot servers

  - by DeaconDesperado

  I have several tarballs that make up all the previous emails for two or three accounts on a mail server. This machine we be shut down within a few weeks and so I need to migrate all the previously subscribed IMAP folders to the new server. The old machine ran Dovecot with exim and delivered all mail to a virtual user folder on the server in maildir format. The new machine uses courier and postfix, also configured to deliver through maildir. The new server is already setup and all clients are successfully logging in, the problem is migrating their old conversations. I've tried moving the old message files directly and deleting the imap db that records which messages have already been fetched, but nothing has been successful. The outlook clients present an error for every message saying that the "message can no longer be located on the server." Keeping the files chronologically sorted is not an object, I just need to migrate the old conversations over. Is there a way to do this in a batch operation that will allow the clients to login to the new server and treat these old messages as though they were new? What is the protocol for this kind of migration?

  Read the article

• iSCSI performance questions

  - by RyanLambert

  Hi everyone, apologies for the long-winded post in advance... Attempting to troubleshoot some iSCSI sluggishness on a brand new vSphere deployment (still in test). Layout is as such: 3 VSphere hosts, each with 2x 10GB NICs plugged into a pair of Nexus 5020s with a 10gig back-to-back between them. NICs are port-channeled in an active/active redundant fashion (using vPC-mac pinning for those of you familiar with N1KV) Both NICs carry service console, vmotion, iSCSI, and guest traffic. iSCSI is on a single subnet/single VLAN that is not routed through our IP network (strictly layer2) Had this been a 1gig deployment, we probably would have split the iSCSI traffic off onto separate NICs, but the price/port gets rather ridiculous when you start throwing 4+ NICs to a server in a 10gigabit infrastructure, and I'm not really convinced it's necessary. Open to dialogue/tech facts re: this, though. At this point even a single VM guest will boot slowly to iSCSI storage (EMC CX4 on the same Nexus 5020 10gig switches), and restores of VMs from iSCSI take about twice as long as we'd expect them to. Our server folks mentioned that if we split the iSCSI off onto its own NIC, performance seems significantly better. From a network perspective, I've run through the variables I can think of (port configuration errors, MTU problems, congestion etc.) and I'm coming up dry. There really is no other traffic on these hosts other than the very specific test being performed at the time. Important thing to note is that guest traffic works just fine... it seems storage is the only thing affected by whatever gremlin exists. Concluding that we're not 'overutilizing' the network infrastructure since we're doing hardly anything, I'm just looking for some helpful tips/ideas we can use to resolve this... preferably without hurling extra 10gig NICs that are going to sit around 10% utilization while we've got 70+% left on our others.

  Read the article

• Installing Ubuntu guest crashes Hyper-V host

  - by Grant

  I have a weird problem that I don't even know where to begin diagnosing. Trying to install Ubuntu to a VM locks up the host system! My setup is: Dell R715 server, dual 16 core AMD opteron processors, 96GB RAM Dell MD3600f SAN Server 2008 R2 Datacenter System Center VMM 2012 There are 5 windows virtual machines running that have had no problems. This is the first linux VM I've tried to create. I setup a VM through virtual machine manager, set the CD drive to a Ubuntu 12.04 server x64 iso, and started it up. It boots up the normal ubuntu install menu, but the second I hit enter on "Install Ubuntu Server", I get disconnected. The HOST machine stops responding to pings. So do all virtual machines on it. It locks up entirely - keyboard on the host won't work, mouse won't move, numlock light won't change. There's no blue screen - the host is sitting at the login screen completely unresponsive. I can't find any relevant logs in event viewer after rebooting. What could cause the host machine to freeze like that? It's not a one time occurrence - it happens every time at the exact same point. Thank god this server isn't in production yet!

  Read the article

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• Microsoft Word "Random" Crashes

  - by Bent Rasmussen

  Word seemingly randomly crashes in an application setting where it is first being used to programmatically databind (bookmarks) and then directly afterwards opened on the user machine for further user input. The error message is quite precise but the workaround has eluded me. Word crashes a moment or two after it has been opened on the user machine with the below exception details. Problem signature: Problem Event Name: APPCRASH Application Name: WINWORD.EXE Application Version: 14.0.6129.5000 Application Timestamp: 5082f354 Fault Module Name: wwlib.dll Fault Module Version: 14.0.6129.5000 Fault Module Timestamp: 5082f3dc Exception Code: c0000005 Exception Offset: 000eed32 OS Version: 6.1.7601.2.1.0.16.7 Locale ID: 1030 Additional information about the problem: LCID: 1030 skulcid: 1030 Sometimes one can run the exact same scenario 50 times before experiencing a crash, other times only a few times. We have tried using different versions of the Word format as well as renaming the databound file after saving so that the file being opened on the user machine is different. Principally Word should never crash but perhaps there is some workaround that can make Word not crash. Googling for a solution there appears to be multiple things that can trigger this bug.

  Read the article

• Relayout LVM Disk

  - by Tom

  I have an Ubuntu 11.10 system with two 500GB disks. The partition tables look like this: /dev/sda1 primary 465.52GB /dev/sda2 extended 243.17MB -> /dev/sda5 logical 243.14MB /dev/sdb1 primary 465.76GB sda1 and sdb1 are in a single LVM physical volume group containing a single logical volume containing a single logical filesystem which is mounted as /. sda5 is mounted as /boot. The problem comes when I want to upgrade to Ubuntu 12.04, which requires at least 247MB free on /boot. So I need to reduce the size of sda1 so that I can increase the size of sda2 and sda5. How the heck do I do that? I can find how to shrink the logical volume group, but I'm not at all clear on how to clear out the end part of sda1 so that I can reduce the physical volume group. Does pvresize just deal with this automagically? Or is that wild wishful thinking? I guess the alternatives are to back everything up onto something or other and recreate the thing from scratch or find out whether GRUB2 supports using LVM for /boot.

  Read the article

• Copying windows home server backup offsite

  - by Simon

  What ways are there to copy a windows home server backup to an offsite location? I'm talking specifically (and only) about the automated backup of my entire machine, and not the shared network folders. I am 90% working away from home on my laptop which has a 640GB drive so the shared folders are essentially useless to me. I backup every night, but if my house burns down or broken into the I'm in serious serious trouble ! I'm really looking for some alternative way to back up my entire machine - which much not interfere with the reliability or speed by which my WHS backs up my laptop every night. Either a way to 'export' a complete machine backup from the server, or recommendations on non-conflicting software I can backup to a 1TB drive at work are what I'm looking for. Note: I believe that WHS uses its own completely proprietary backup and doesn't use things like any 'backup bit' or 'archive bit'. I just dont want to install some other backup software that will conflict. PS I'm now running Windows 7 and just realized that I should probably check out the backup functionality it gives me. I assume that won't conflict right! Edit: Thanks for the hosted solutions. I'd also appreciate ways to backup to an 'offsite' location that I control - like my office vs. my home. The hosted solutions I think will be too slow or expensive for my needs.

  Read the article

• How to distribute multiple executions of an app across many machines

  - by Salec

  I've got a simulation app (64-bit windows) that runs without any user interaction. This app gathers information and pushes it to a remote MS SQL Server. What I'd like to do is execute this simulation as many times as I can on multiple machines after our nightly build has finished and it has passed the test suite. If possible I'd love to have the ability to configure it to stop after x total runs or if the entire batch has taken over y hours. I've tried using Visual Studio's built in test framework since we already have a test lab set up with multiple agents. I created a single unit test that simply runs the simulation then I created an ordered test and added that single test multiple times (from what I gather, this is the only way to execute the same unit test more than once). I found that ordered tests are only run on a single agent and not distributed which is very limiting. We use TeamCity to perform our nightly builds and I suspect it's possible to implement this on top of that, but I'm fairly new to TeamCity. We also have Jenkins and Bamboo available and I'm open to any other software that would get the job done presuming it runs on a 64-bit Windows OS. Any suggestions?

  Read the article

• Weird Apache behaviour and with files again

  - by afifio

  Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

  Read the article

• “NT AUTHORITY\ANONYMOUS LOGON” error in Windows 7 (ASP.NET & Web Service)

  - by Tony_Henrich

  I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use the 'Classic .NET AppPool' with NetworkServices identity. I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? Did I miss a setting? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

• Can a website company that builds 4-5 websites a year afford dedicated hosting?

  - by Petras

  We manage about 30 websites that use shared ASP.NET SQL Server web hosting. These are typical small/medium business websites and they perform fine in this environment. Recently I was looking at VPS hosting in this thread http://serverfault.com/questions/128329/how-do-you-host-multiple-public-facing-websites-on-a-vps After contacting a provider in one of the replies I was told that VPS hosting is not recommended for 30 sites, even if they are small. The resource requirements might be too great even for VPS. So I should turn to dedicated hosting. The lowest cost dedicated hosting is $219 per month (see http://www.serverintellect.com/dedicated/pentiumdservers.aspx). But this is only for a single processor which seems too light for a machine running both IIS and SQL. In our office all the developers work on quad cores so I assume I’d really need the Quad Processor. However, this starts at $599 monthly. Now, I won’t be able to transfer all of our 30 sites to this machine. I’d only be able to transfer say 5 or 6. However, moving forward, I’d be able to host all future sites on this machine. This amounts to 4-5 per year. Let’s look at the economics. Shared hosting costs are typically $16.95 monthly (see http://www.crystaltech.com/dotnet.aspx). So here’s the dilemma First months costs: $599 First month revenue: 6x$16.95 = $101.7 Loss in first month: $497.3 First year costs: $599x12=$7188 First month revenue: 6x$16.95x12 + 5x$16.95x6(averaged) = $1728.9 Loss in first year: $5459.1 Clearly it is going to take years for this server to pay for itself. It just doesn’t seem economical! Am I missing something here, or is dedicated not the way to go with the amount of sites we build?

  Read the article

• Windows 7 can't find Ubuntu computer by hostname

  - by endolith

  I got a new Windows 7 machine, and was using VNC, SSH etc to connect to my Ubuntu machine, and it worked fine previously connecting to the Ubuntu computer's hostname. Now it doesn't work if I use the machine's hostname, but it does if I use the local IP or DynDNS name. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it? Aha: It probably has something to do with Samba. I reset the Samba configuration the other day, and apparently this can affect it. http://ubuntu-virginia.ubuntuforums.org/showthread.php?t=1558925 I tried commenting out "encrypt passwords = No" as described there, but it still doesn't work.

  Read the article

• Recovering ZFS pool with errors on import.

  - by Sqeaky

  I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

  Read the article

• Rackspace Ubuntu 12.04 server stuck in initramfs after kernel upgrade

  - by Znarkus

  Can't boot after I did a aptitude full-upgrade and let it update menu.lst (did a diff first and it looked good). This is what I've done so far in the BusyBox shell: mkdir /tmp/xvda1 mount /dev/xvda1 /tmp/xvda1 chroot /dev/xvda1 nano /boot/grub/menu.lst This file looks like this: title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro quiet splash initrd /boot/initrd.img-3.2.0-31-virtual title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual (recovery mode) root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro single initrd /boot/initrd.img-3.2.0-31-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-generic titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-generic titleChainload into GRUB 2 root(hd0,0) kernel/boot/grub/core.img titleUbuntu 12.04.1 LTS, memtest86+ root(hd0,0) kernel/boot/memtest86+.bin From what I remember, the upgrade added the UUID= string. Should I remove these? Or rather, how do I get my system back online again? Thanks. Update: Seems like I can't even edit the file. [ Error writing /boot/grub/menu.lst: Read-only file system ]

  Read the article

• Incredble low disk performance on HP DL385 G7

  - by 3molo

  Hi, As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 configurations. I run Vmware ESXi 4.1. Problem: Even with one virtual machine only, tried Linux 2.6/Windows server 2008/Windows 7, the VMs' feel really sluggish. With windows 7, the vmware converter installation even timed out. Tried both SATA and SAS disks and SATA disks are nearly unsusable, while SAS disks feels extremely slow.I can't see a lot of disk activity in the infrastructure client, but I haven't been looking for causes or even tried diagnostics because I have a feeling that it's either because of the cheap raid controller - or simply because of the lack of memory for it. Despite the problems, I continued and installed a virtual machine that serves a key function, so it's not easy to take it down and run diagnostics. Would very much like to know what you guys have to say of it, is it more likely to be a problem with the controller/disks or is it low performance because of budget components? Thanks in advance,

  Read the article

• Error on LDAP Login - xsessions error - Session lasted less than 10 seconds

  - by Draineh

  I have two machines both running CentOS 5.6 64bit. On the LDAP Machine it has a DHCP, BIND and OpenLDAP Server. LDAP is correctly configured and users can authenticate against it. Using root I configure machine 2 to use LDAP for authentication and when trying to log in it successfully authenticates against a saved user on the LDAP Server but produces the following errors and then throws me back to the login screen. I can still sign in as root and use the machine as normal. The syslog doesn't show any errors and I disabled SELinux to see if it was interfering. The error; Your session only lasted less than 10 seconds. If you have not lgoged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. Try logging in with one of the failsafe sessions to see if you can fix this problem. There is then a tickbox to view the contents of ~/.xsessions-errors which contains; /etc/gdm/PreSession/Default: Registering your session with utmp /etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -u /var/run/utmp -x "/var/gdm:0:Xservers" -h "" -l ":0" "admin" localuser:admin being added to access control list No profile for user 'admin' found /bin/sh: /usr/bin/dbus-launch --exit-with-session /etc/X11/Xinit/Xclients: No such file or directory /bin/sh: line 0: exec: /usr/bin/dbus-launch --exit-with-session /etc/X11/xinit/Xclients: cannot execute: No such file or directory Apologies if someone notices something isn't spelt quite right or doesn't sound right, the system never actually creates or saves this file so I have had to type it across from the screen. Through the authentication panel in CentOS on the client I have set it to create the users home directory on login. The user is being correctly authenticated and the /home/admin folder has been created but this error would suggest it has not? The client is a new install on an 80gb hard drive so there is well over 80% of the drive still available. Thanks for any suggestions or pointers.

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >