Search Results

Search found 33162 results on 1327 pages for 'static ip address'.

Page 274/1327 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• ipmi - can't ping or remotely connect

  - by Fidel

  I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

  Read the article

• Balancing internal services using a Cisco CSS 11501

  - by Ladadadada

  First, the background to the problem: I have a Cisco CSS11501 that I am using to load balance a few web servers. These web servers have two network interfaces, one internal and one external and we are sending the requests to the internal interface. We have the CSS configured to do NAT because our webservers need to see the client's IP address. Because the TCP packets hit the webservers with a source address on the Internet, the webserver tries to send the packet back to the client over the external interface and not through the load balancer. In order to stop these requests being sent back out to the Internet via the external interface, we added a routing rule on these boxes so that all traffic with a source address on the internet will use the load balancer as the gateway. This part works fine. What I would also like to to is use the CSS as a load balancer for internal services such as our MySQL slaves. When I do this, I run into a similar problem; the TCP connection goes from the web server to the load balancer and then from the load balancer to the MySQL slave but the CSS spoofs a source address of the original webserver. The MySQL slave then tries to send the response directly to the webserver via the internal network and not via the load balancer. The ideal solution would be to tell the CSS not to do source address spoofing on the internal network and only do it for requests originating on the Internet. Is this possible ? Failing that, is there a way of directing the load balanced traffic back through the load balancer while keeping the other traffic (say SSH) purely on the internal network ? Is there another way of using the CSS11501 to load balance internal services ?

  Read the article

• How can I add subdomains of default accepted domain of Exchange 2010

  - by Christoph

  I have an Exchange 2010 that has several accepted domains. Now I want this server to accept - besides the default SMTP domain - all subdomains of the default domain. The documentation in Technet states When you create an accepted domain, you can use a wildcard character (*) in the address space to indicate that all subdomains of the SMTP address space are also accepted by the Exchange organization. For example, to configure Contoso.com and all its subdomains as accepted domains, enter *.Contoso.com as the SMTP address space. It is, however not possible to add e. g. *.contoso.com if contoso.com is already configured. Exchange complains in this case that the domain is already configured. It is also not possible to edit the "value", i. e. the domain name of an accepted domain. I know that I cannot modify the default accepted domain, but changing it to another does not help either, because the domain name itself can never be edited. The last idea was deleting the accepted domain and re-creating it with "*." prepended. This is, however, also impossible because it is of course not possible to delete or modify the default address policy and if a domain name is used in an address template it cannot be removed from the accepted domains. The question is: How can I make my Exchange 2010 server accept any subdomain of its default accepted domain with a wildcard?

  Read the article

• Create a mailbox in qmail, then forward all incoming message to Gmail

  - by lorenzo-s

  I needed to let PHP send mails from my webserver to my web app users. So I installed qmail on my Debian server: sudo apt-get install qmail I also updated files in /etc/qmail specifing my domain name, and then I run sudo qmailctl reload and sudo qmailctl restart: /etc/qmail/defaultdomain # Contains 'mydomain.com' /etc/qmail/defaulthost # Contains 'mydomain.com' /etc/qmail/me # Contains 'mail.mydomain.com' /etc/qmail/rcpthosts # Contains 'mydomain.com' /etc/qmail/locals # Contains 'mydomain.com' Emails are sent without any problem from my PHP script to any email address, using the standard mail PHP library. Now the problem is that if I send mail from my PHP using [email protected] as sender address, I want that customer can reply to that address! And possibly, I want all mails sent to this address should be forwarded to my personal Gmail address. At the moment qmail seems to not accept any incoming mail because of "invalid mailbox name". Here is a complete SMTP session I established with my server: me@MYPC:~$ nc mydomain.com 25 220 ip-XX-XX-XXX-XXX.xxx.xxx.xxx ESMTP HELO [email protected] 250 ip-XX-XX-XXX-XXX.xxx.xxx.xxx MAIL FROM:<[email protected]> 250 ok RCPT TO:<[email protected]> 250 ok DATA 554 sorry, invalid mailbox name(s). (#5.1.1) QUIT I'm sure I missing something related to mailbox or alias creation, in fact I did nothing to define mailbox [email protected] anywhere. But I tried to search something on the net and on the numerous qmail man pages, bot I found nothing.

  Read the article

• tomcat dns forwarding to multiple applications

  - by basis vasis

  I recently installed business objects software on tomcat 6. I have 2 domains - domain1 and domain2. This software allows access to two of its applications via these URLS: ADDRESS:http://myservername.domain1:8080/BO/APP1 and ADDRESS:http://myservername.domain1:8080/BO/APP2. Instead of these urls, I would like the end users to access these apps via something like http://bobj.domain2.com:8080/BO/APP1 and http://bobj.domain2.com:8080/BO/APP2. I cannot figure out how to accomplish that. I have looked into the option of http redirect (not good because the destination address shows up in the address bar), domain forwarding (not sure if it would work with multiple applications and forwarding from one domain to another) and also using apache tomcat with mod_jk by using virtual hosts (not sure if it is possible when forwarding from one domain to a sub domain in another domain) ?? please advise as to what would be my best option and how to accomplish. thanks a bunch

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• Design guideline for saving big byte stream in c# [migrated]

  - by Praveen

  I have an application where I am receiving big byte array very fast around per 50 miliseconds. The byte array contains some information like file name etc. The data (byte array ) may come from several sources. Each time I receive the data, I have to find the file name and save the data to that file name. I need some guide lines to how should I design it so that it works efficient. Following is my code... public class DataSaver { private static Dictionary<string, FileStream> _dictFileStream; public static void SaveData(byte[] byteArray) { string fileName = GetFileNameFromArray(byteArray); FileStream fs = GetFileStream(fileName); fs.Write(byteArray, 0, byteArray.Length); } private static FileStream GetFileStream(string fileName) { FileStream fs; bool hasStream = _dictFileStream.TryGetValue(fileName, out fs); if (!hasStream) { fs = new FileStream(fileName, FileMode.Append); _dictFileStream.Add(fileName, fs); } return fs; } public static void CloseSaver() { foreach (var key in _dictFileStream.Keys) { _dictFileStream[key].Close(); } } } How can I improve this code ? I need to create a thread maybe to do the saving.

  Read the article

• Appropriate to Stateless Autoconfigure a Server?

  - by user31498

  I am setting up a network to support IPv6. Stateless Autoconfiguration seems to be the preferred way to get an IP address on an IPv6 network but is this the preferred way for a server? Other machines outside of the network are going to need to be able to talk to the server. Is it preferable to give the server a static IP address or is there something fancy that can be done with DNS to keep track of the server address?

  Read the article

• Rails: Law of Demeter Confusion

  - by user2158382

  I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. EDIT I completely understand and agree that this is still a violation and I need to create a method in Wallet called withdraw that handles the payment for me and that I should call that method inside the Customer class. What I don't get is that according to this process, my first example still violates the Law of Demeter because Invoice is still reaching directly into Customer to get the street. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

  Read the article

• IIS6 Front Page Extension: Set Reply-To in Webbot mailers

  - by hurikhan77

  We are running some old legacy IIS6 websites with frontpage extensions. The contact forms (using webbot frontpage extension) use the administrators email address as from address which is pretty cumbersome as our customers tend to click just reply in the requests they receive and we always get these mails and have to bother about them. How do you set a reply-to per webbot form? Or how do you set a from or reply-to globally per IIS6 vhost? In the HTML code it looks like this: <!--webbot bot="SaveResults" S-Email-Format="TEXT/PRE" S-Email-Address="[email protected]" ... --> But this is the recipient address. Additional question: Will it be sufficient to just change this code? Or do I need to apply settings elsewhere?

  Read the article

• How do I setup routing for 2 companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: 2 companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants it's own Internet connection (ISP A) and company B wants it's own Internet connection (ISP B). VLANs are deployed internally to separate the 2 company's networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I setup policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Restrictive routing best practices for Google App Engine with python?

  - by Aleksandr Makov

  Say I have a simple structure: app = webapp2.WSGIApplication([ (r'/', 'pages.login'), (r'/profile', 'pages.profile'), (r'/dashboard', 'pages.dash'), ], debug=True) Basically all pages require authentication except for the login. If visitor tries to reach a restrictive page and he isn't authorized (or lacks privileges) then he gets redirected to the login view. The question is about the routing design. Should I check the auth and ACL privs in each of the modules (pages.profile and pages.dash from example above), or just pass all requests through the single routing mechanism: app = webapp2.WSGIApplication([ (r'/', 'pages.login'), (r'/.+', 'router') ], debug=True) I'm still quite new to the GAE, but my app requires authentication as well as ACL. I'm aware that there's login directive on the server config level, but I don't know how it works and how I can tight it with my ACL logic and what's worse I cannot estimate time needed to get it running. Besides, it looks only to provide only 2 user groups: admin and user. In any case, that's the configuration I use: handlers: - url: /favicon.ico static_files: static/favicon.ico upload: static/favicon.ico - url: /static/* static_dir: static - url: .* script: main.app secure: always Or I miss something here and ACL can be set in the config file? Thanks.

  Read the article

• Adding operation in middle of complex sequence diagram in visio 2003

  - by James

  I am using Microsoft Visio 2003 to define static classes with operations/methods and a sequence diagrams referring to these classes. The sequence diagram is almost done, but i realized that i missed one operation in middle of the diagram. When i try to move rest of the sequences down by selecting it as a block, all the operations in the block loose link with static diagrams. ( Methods which were referred to static classes as fun(), became fun, which means that now they no longer refer to static diagrams and any future changes would not be reflected in dynamic sequence diagrams automatically.) The sequence diagrams have grown to A3 size paper and i have many of such diagrams which needs correction. Manually moving the operations one by one would involve lots of effort. Could someone kindly suggest a way to overcome this problem?

  Read the article

• rc scripts dependencies

  - by chris

  On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

  Read the article

• Ubuntu won't connect to wired network

  - by djeikyb

  I'm running 10.04, upgraded from 9.10, maybe, but probably not upgraded from 9.04. I have two wifi routers. Zeus is connected to the dsl modem. Hermes uses a wds bridge with Zeus to extend the network. My desktop (Daedalus) is ethernetted to Hermes. My laptop (Clyde) is wifi, switching to Hermes or Zeus as needed. Occasionally, as in whenever I transfer a large file from desktop to laptop, the wds bridge will die. Fixing it means restarting both routers, though it seems Hermes should boot first. This is ridiculous, and eventually I'll get around to asking you guys to help me stop it from happening. More importantly is that my desktop requires a reboot to get back on the network. WTF. ifconfig shows my nic has no ip. /etc/init.d/networking restart doesn't do anything, not even give me a lousy ip. dhcpcd eth1 grants me an ip address, but doesn't help with internet access. route -n shows what looks like my normal routing table, but pinging google.com informs me it's an unknown host. jake@daedalus:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth1 It may be worth noting that I can ping both Zeus (10.1.1.1) and Hermes (10.1.1.4) and my laptop (10.1.1.55). Much obliged for any help. Rebooting is, well, trivial in this instance. But it's stupid. I switched to linux because I like the idea that if one part breaks, you fix it instead of reboot reboot reboot. I've left my poor desktop in disarray, confining myself to my little netbook. My desktop is broken, awaiting magical commands from you brilliant folk. (and yes, i know clyde the netbook should be named icarus. it was its original name. ironically the ssd burned out, and i felt it wasn't right when it came to reinstalling)

  Read the article

• Newsletter sent with drupal goes to Spam Folder [closed]

  - by HerrSerker

  Possible Duplicate: How could I prevent my mail from being recognized as spam? I'm sending a newsletter with drupals simplenews module The website is hosted on an 1und1 server in germany (as seen in in header domains online.de and kundenserver.de) When I send it, it goes to Spam folder in Yahoo & GMail Mailbox, but not in Spam Folder in web.de, hotmail and GMX Mailboxes Here is, what I have in the Mail Header (for yahoo in this example) Received: from 12.345.678.90 (EHLO sXXXXXXXXX.online.de) (12.345.678.90) by mtaXXX.mail.kks.yahoo.co.jp with SMTP; Fri, 15 Jun 2012 18:45:24 +0900 Received: from [127.0.0.1] (helo=infongdXXXXX.rtr.kundenserver.de) by sXXXXXXXXX.online.de with esmtp (Exim 4.72) (envelope-from <[email protected]>) id 1SfT5k-00068r-Q8 for [email protected]; Fri, 15 Jun 2012 11:45:20 +0200 Received: from 83.136.130.41 (IP may be forged by CGI script) by infongdXXXXX.rtr.kundenserver.de with HTTP id 0Z04SW-1SQTKp3LPr-00YxYk; Fri, 15 Jun 2012 11:45:20 +0200 From: SENDER <[email protected]> To: "[email protected]" <[email protected]> Date: Fri, 15 Jun 2012 11:45:20 +0200 Subject: This is the subject of the newsletter Thread-Topic: This is the subject of the newsletter Thread-Index: Ac1K3nT42juzo7uCSkq5dTlby1ZvpQ== List-Unsubscribe: <http://www.example.com/newsletter/confirm/remove/XXXXXXXXX> X-MS-Has-Attach: X-Auto-Response-Suppress: All X-MS-TNEF-Correlator: x-originating-ip: [12.345.678.90] authentication-results: mtaXXX.mail.kks.yahoo.co.jp from=example.com; domainkeys=neutral (no sig); dkim=neutral (no sig) [email protected] errors-to: "SENDER" <[email protected]> received-spf: none (sXXXXXXXXX.online.de: domain of [email protected] does not designate permitted sender hosts) x-apparently-to: [email protected] via 123.45.67.890; Fri, 15 Jun 2012 18:45:25 +0900 x-sender-info: <[email protected]> content-length: 13762 Content-Type: multipart/alternative; boundary="_000_7471797868716571796675707173696675806577726778666766687_" MIME-Version: 1.0 I cannot see any direct spam filter message in this. But I'm kind of stunned by the Received: from 83.136.130.41 (IP may be forged by CGI script) part. After I searched a bit, it seems, that this is a special 'feature' of 1und1 Mail servers. Here are my questions: Is it possible that, if I get rid of the 'Ip maybe forged' part, that the Mail is not regarded as spam anymore? If so, Does anyone know, how I can get rid of it in drupal?

  Read the article

• Why would an iPod Touch and PS3 respond to netdiscover as 0.0.0.0?

  - by Iszi

  Only slightly related to this question, because it was discovered in the same scan: Can someone explain how this happened? When running netdiscover on my home network, my iPod Touch (identified by DHCP-reserved IP address and MAC address) responded to both its own IP address on our 10.x.x.x subnet and to 0.0.0.0 also. Why would this have happened? EDIT: After letting netdiscover run awhile longer, it seems one of the PS3s on the network is also answering to 0.0.0.0 - why is this?

  Read the article

• Could not open IPV6 addr on web browser

  - by vito

  I have ipv6 address fe80::21f:a4ff:fe91:2e44%4. This is the address of modem/router. I am unable to open this address in browser to view the web configuration. I am able to telnet to fe80::21f:a4ff:fe91:2e44%4, view the console UI & can do settings. I can also open 192.168.1.1(IPv4 address of modem/router) in browser. I tried [fe80::21f:a4ff:fe91:2e44] in all browsers like IE, Firefox & Chrome. It was not possible.

  Read the article

• IMCEMAILTO and exghost

  - by Steve

  One of my associates sent an email to me that was also sent to a client. The client's email address appears to be mangled, however. He says he sent it twice---the first one bounced and the second did not. The email address he sent it to was: [email protected] My searches on Google indicate that the MAILTO could be a bad protocol but I didn't know how the email address would be interpreted by exchange server. What email address was the email sent to, how did IMCEMAILTO get there, and does it have any change of getting delivered?

  Read the article

• The best way to have a pointer to several methods - critique requested

  - by user827992

  I'm starting with a short introduction of what i know from the C language: a pointer is a type that stores an adress or a NULL the * operator reads the left value of the variable on its right and use this value as address and reads the value of the variable at that address the & operator generate a pointer to the variable on its right so i was thinking that in C++ the pointers can work this way too, but i was wrong, to generate a pointer to a static method i have to do this: #include <iostream> class Foo{ public: static void dummy(void){ std::cout << "I'm dummy" << std::endl; }; }; int main(){ void (*p)(); p = Foo::dummy; // step 1 p(); p = &(Foo::dummy); // step 2 p(); p = Foo; // step 3 p->dummy(); return(0); } now i have several questions: why step 1 works why step 2 works too, looks like a "pointer to pointer" for p to me, very different from step 1 why step 3 is the only one that doesn't work and is the only one that makes some sort of sense to me, honestly how can i write an array of pointers or a pointer to pointers structure to store methods ( static or non-static from real objects ) what is the best syntax and coding style for generating a pointer to a method?

  Read the article

• How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

  - by Hanno Fietz

  I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

  Read the article

• Cannot connect to WEBrick on home network

  - by Chris Stewart

  I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

  Read the article

• Php 5.3.3. Access log

  - by irolla

  Hi I'm using php-fpm. In 5.3.2 when I'm opening phpinfo page in access log I get: ip - - [26/Aug/2010:16:35:32 +0400] "GET /phpinfo.php HTTP/1.1" 200 13322 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" But in 5.3.3 I'm getting: ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php HTTP/1.1" 200 11891 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42 HTTP/1.1" 200 2536 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=SUHO8567F54-D428-14d2-A769-00DA302A5F18 HTTP/1.1" 200 2825 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42 HTTP/1.1" 200 2158 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" Why there is 4 lines insted of 1? And what means "?=PHPE...". Is it PHP sessions? My php5.3.3 fpm config: [global] pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log log_level = notice [pool_0] listen = 127.0.0.1:9000 listen.backlog = -1 listen.allowed_clients = 127.0.0.1 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 pm.status_path = /pool_0/status rlimit_files = 1024 rlimit_core = 0 catch_workers_output = yes php_admin_flag[register_globals] = true php_admin_value[error_reporting] = E_ALL & ~E_DEPRECATED php_admin_value[max_execution_time] = 15 php_admin_flag[short_open_tag] = true php_admin_flag[display_errors] = false

  Read the article

• DNS problems on CentOS fresh install

  - by Rick Koshi

  I'm having some DNS issues on a new box I'm installing with CentOS 6.2. I am able to look up names using nslookup, dig, or host. I am able to ping machines by name or by IP address. However, when I try other tools, such as ssh, wget, or yum, they are unable to resolve names. For example: # wget http://www.google.com --2012-03-08 14:48:06-- http://www.google.com/ Resolving www.google.com... failed: Name or service not known. wget: unable to resolve host address `www.google.com' # ssh www.google.com ssh: Could not resolve hostname www.google.com: Name or service not known # ping -c 1 www.google.com PING www.l.google.com (74.125.113.106) 56(84) bytes of data. 64 bytes from vw-in-f106.1e100.net (74.125.113.106): icmp_seq=1 ttl=46 time=43.6 ms --- www.l.google.com ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 59ms rtt min/avg/max/mdev = 43.665/43.665/43.665/0.000 ms # host www.google.com www.google.com is an alias for www.l.google.com. www.l.google.com has address 74.125.113.99 www.l.google.com has address 74.125.113.103 www.l.google.com has address 74.125.113.104 www.l.google.com has address 74.125.113.105 www.l.google.com has address 74.125.113.106 www.l.google.com has address 74.125.113.147 My /etc/nsswitch.conf file is the default, including this (standard) line: hosts: files dns /etc/resolv.conf is as set up by DHCP: ; generated by /sbin/dhclient-script nameserver 192.168.1.254 192.168.1.254 is a working DNS server (my DSL modem, working for years with other machines) Anyone know why ping would work, but ssh/wget would fail? Per NcA's suggestion, I tried changing /etc/resolv.conf to point to 8.8.8.8. Oddly enough, this does make it work. Obviously, my DSL modem is responding to DNS requests in some way that some parts of Linux's resolution system don't like. Looking at the tcpdump, I am unable to see what the difference is. Certainly, both servers are sending the same addresses. Here's the output from tcpdump -nn -X with the server set to the DNS server on the DSL modem. It's clearly replying with the correct addresses, but ssh/wget don't seem happy with it for some reason: 15:53:52.133580 IP 192.168.1.254.53 > 192.168.1.2.54836: 33157 7/0/0 CNAME www.l.google.com., A 74.125.115.105, A 74.125.115.106, A 74.125.115.147, A 74.125.115.99, A 74.125.115.103, A 74.125.115.104 (148) 0x0000: 4500 00b0 e33a 0000 ff11 53b1 c0a8 01fe E....:....S..... 0x0010: c0a8 0102 0035 d634 009c 7528 8185 8180 .....5.4..u(.... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0007 acd0 0008 0377 7777 016c c010 .........www.l.. 0x0050: c02c 0001 0001 0000 0001 0004 4a7d 7369 .,..........J}si 0x0060: c02c 0001 0001 0000 0001 0004 4a7d 736a .,..........J}sj 0x0070: c02c 0001 0001 0000 0001 0004 4a7d 7393 .,..........J}s. 0x0080: c02c 0001 0001 0000 0001 0004 4a7d 7363 .,..........J}sc 0x0090: c02c 0001 0001 0000 0001 0004 4a7d 7367 .,..........J}sg 0x00a0: c02c 0001 0001 0000 0001 0004 4a7d 7368 .,..........J}sh 15:53:52.135669 IP 192.168.1.254.53 > 192.168.1.2.54836: 65062- 0/0/0 (32) 0x0000: 4500 003c e33b 0000 ff11 5424 c0a8 01fe E..<.;....T$.... 0x0010: c0a8 0102 0035 d634 0028 98f9 fe26 8000 .....5.4.(...&.. 0x0020: 0001 0000 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 gle.com..... I'm not enough of an expert to know if this is malformed in some way, but ping seems to do the right thing with it. For comparison, here's the same thing when querying 8.8.8.8: 15:57:27.990270 IP 8.8.8.8.53 > 192.168.1.2.49028: 59114 7/0/0 CNAME www.l.google.com., A 74.125.113.105, A 74.125.113.103, A 74.125.113.106, A 74.125.113.147, A 74.125.113.104, A 74.125.113.99 (148) 0x0000: 4500 00b0 5530 0000 2f11 6453 0808 0808 E...U0../.dS.... 0x0010: c0a8 0102 0035 bf84 009c 39f8 e6ea 8180 .....5....9..... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 516a 0008 0377 7777 016c c010 ....Qj...www.l.. 0x0050: c02c 0001 0001 0000 0116 0004 4a7d 7169 .,..........J}qi 0x0060: c02c 0001 0001 0000 0116 0004 4a7d 7167 .,..........J}qg 0x0070: c02c 0001 0001 0000 0116 0004 4a7d 716a .,..........J}qj 0x0080: c02c 0001 0001 0000 0116 0004 4a7d 7193 .,..........J}q. 0x0090: c02c 0001 0001 0000 0116 0004 4a7d 7168 .,..........J}qh 0x00a0: c02c 0001 0001 0000 0116 0004 4a7d 7163 .,..........J}qc 15:57:28.018909 IP 8.8.8.8.53 > 192.168.1.2.49028: 31984 1/1/0 CNAME www.l.google.com. (102) 0x0000: 4500 0082 7b1b 0000 2f11 3e96 0808 0808 E...{.../.>..... 0x0010: c0a8 0102 0035 bf84 006e c67e 7cf0 8180 .....5...n.~|... 0x0020: 0001 0001 0001 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 517f 0008 0377 7777 016c c010 ....Q....www.l.. 0x0050: c030 0006 0001 0000 0258 0026 036e 7334 .0.......X.&.ns4 0x0060: c010 0964 6e73 2d61 646d 696e c010 0016 ...dns-admin.... 0x0070: 91f3 0000 0384 0000 0384 0000 0708 0000 ................ 0x0080: 003c .< I still don't know why the server's reply is adequate for ping but not for ssh/wget. If anyone has ideas, I'd be happy to hear them. For now, though, I can either refer to an outside DNS server or set up my own server on the new box. It's a workaround that seems like it should be unnecessary, but will allow me to proceed.

  Read the article

• Sharing internet connection from Windows XP using wi-fi router

  - by Darius

  Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >