Search Results

Search found 9340 results on 374 pages for 'andy boot'.

Page 275/374 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Compiz using 40% CPU on Ubuntu 13.10

  - by Olli

  After upgrading to 13.10, compiz process has started taking up to 40% of CPU resources. In addition, Unity is sluggish just like in this recent question Compiz at 30% of CPU on Thinkpad T420. My PC is HP Compaq NX6310 and Compiz version is 0.9.10.2. First I had error message during boot, but did find solution for that (Bug #1014289) by updating the kernel to newer 3.11.4, it did not change the CPU usage. For the CPU problem I tried solution for Bug #1221837 by adding the line MESA_GL_VERSION_OVERRIDE=1.4 in the file /etc/environment - that did not help me, so my problem seems not to be the same bug. Any suggestions on how to resolve this issue?

  Read the article

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• Time display and Cursor bug in Ubuntu 14.04 LTS

  - by user291774

  Just installed Ubuntu 14.04. Noticed the time in seconds speeds up then slows down to normal speed. The cursor for the keyboard has a strange rhythm; it stays normal, then slowly speeds up faster and faster till it looks like it's not blinking anymore, then goes back to normal and starts the process again. It almost seems like my whole operating system speeds up then slows down again. Even the hour circle that spins when it's loading starts slowly then it picks up speed till it spins so fast it looks like it's not even spinning. It interferes with video and the whole system. I have a Dell Vostro 3750 dual video cards and dual boot with Windows 7. Windows is running fine.

  Read the article

• Ask The Readers: How Do You Find Your Next Game?

  - by Jason Fitzpatrick

  Once upon a time the only place for new video game information was down at the arcade. These days there’s a news source and niche for everyone and every kind of game; where and how do you find your next video game conquest? Word of mouth? App recommendations? Critical reviews? This week we’re interested in lining ourselves up for a little summer fun: tell us all about your tips, tricks, and techniques for finding the real gems in the pile of games that comes out every year. Sound off in the comments and then check back in on Friday for the What You Said roundup. HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• Lock screen elements frozen on desktop

  - by user286968

  I have finally made the switch from Windows to Ubuntu and now have to ask the first question because search did not help me this time. (Please help me in a newb-friendly way) The problem is easily described: The elements shown in the lockscreen on boot (ubuntu logo in the middle and watermark in bottom left corner) stay there even when I'm entering desktop. How can I remove them again? They haven't been there in the first place, but after updating Ubuntu with Update Center, the problem occured. As I cant post an image here with my reputation, pls see this link: http://s30.postimg.org/age8fraww/Screenshot_from_2014_05_30_23_27_58.jpg Thanks for your help and time. Kind regards

  Read the article

• Cannot get grub menu to timeout (or go away)

  - by Eric

  I am running Ubuntu 12.04. I cannot for the life of me get the grub menu (with options) to go away. I would like it to auto-boot into the first option. I've edited /etc/default/grub so that it looks like the following: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" After this, I ran sudo update-grub. Then I realized that I had grub 2, so I ran sudo update-grub2 (both make it look like they create the grub.cfg file successfully. I restart my computer and it goes back to the grub menu and just sits there until I make a choice. This is not desirable if the power goes out... :-) I also tried reinstalling grub using sudo grub-install /dev/sda - also unsuccessful

  Read the article

• HP Bluetooth Mouse Connection Problems

  - by Arthur Upfield

  About a month ago, I turned on my laptop (Ubuntu 14.04 and Windows 8.1 dual boot, though the mouse works fine in Windows), logged in and connected my HP x4000b mouse via a bluetooth dongle (Kinivo BTD-400), and noticed that the battery indicator in Ubuntu said that the mouse battery was at 0%. The day before it was around 30%, so I decided to just change the batteries in the mouse, but after reconnecting with the new batteries, it still said 0%. The mouse connected and worked just fine, so I didn't think much of it. About a week after that, I noticed that my mouse would sometimes disconnect if I didn't use it, but since reconnecting isn't that hard I just decided to leave it. Now it also won't reconnect unless I log out and back in again, which is getting sort of tedious. Is there any way to fix this issue? Any help is appreciated, and I will try and respond to questions ASAP. Thanks.

  Read the article

• Can't install ubuntu along windows 7

  - by Mark

  I boot from a DVD the last version of ubuntu 12.04 x64(because i have 8g. of ram) ,hit install Ubuntu ,check Install Along windwos 7(or something like this ,anyway the first option) and the button in the bottom right corner says "Restart to install" or just restart...i cant remember. So ,i hit the button than ,the screen goes black ,some proceses are stopped and on the middle of the screen it writes like this " Please remove installation media and close the tray (if any) then press ENTER: " The DVD rom opens and i remove the dvd ,close the tray ,pushing enter and the windows is starting ,no instalation ,no file copied to my PC ,nothing.

  Read the article

• I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

  - by Mikeeeee

  I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

  Read the article

• Help! Installer crashing

  - by Mike

  I had ubuntu 12.04 installed on a Satellite l635. I wanted to start over with a fresh install because I had experimented with a bunch of different things, and computer was getting glitchy and random freezes. I used the same iso I used for original install, and it keeps say the installer crashed with a erron5 input/output error. Tried an older iso for 11.10 I had used in the past with same issue... To see if it was disc or computer (not a great idea) I tried the 12.04 iso on another laptop. Now I have 2 laptops with no os. Both discs however live boot on both systems. PLEASE HELP! I've searched forums and can't find the same problem.

  Read the article

• My data vanished after copying to E drive

  - by pnp

  Of late I had been thinking of having a fresh install of Ubuntu. So I cut-pasted all my required files and folders in my E drive. Then I decided to not to have a fresh install and just let it be. Later, when I booted up in Windows (dual-boot with 12.04 and Windows 7), I found that the files and folders I had cut-pasted from my home account in Ubuntu are just not there. What is even more surprising is that now, when I am back on Ubuntu, those files and folders that should have been there in my E drive are also not there. Is it an Ubuntu issue or a hard drive issue?

  Read the article

• Computer crashing after a few minutes of logging in

  - by user88612

  I have a fresh install of 12.04.1 on my machine. It is constantly crashing after logging in. I noticed it crashed repeatedly when using Minitube and would crash in Chrome. It seems to be that anything graphics related is causing it? I've booted the system 7 times and each time it would crash within 5-10 minutes after logging in. I have no swap and it's a dual-boot system with Windows 7. My system specs: AMD Phenom XII 925 8GB DDR3 (new) AMD Radeon HD 7770 GPU (new) Seagate 1TB Barracuda HDD (new) Catalyst Drivers

  Read the article

• How do I check whether partitions on my SSD are properly aligned?

  - by elementz

  I just installed ubuntu on my new intel SSD. Now I am not sure, whether paritions are properly aligned in respect to my specific SSD. Here's my fdisk output. $ fdisk -l Platte /dev/sda: 120.0 GByte, 120034123776 Byte 255 Köpfe, 63 Sektoren/Spur, 14593 Zylinder Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a6294 Gerät boot. Anfang Ende Blöcke Id System /dev/sda1 * 1 1913 15360000 83 Linux /dev/sda2 1913 14058 97558528 83 Linux /dev/sda3 14058 14594 4300800 82 Linux Swap / Solaris Also, do I still need to align my SSD at all, since I am using TRIM on the ext4 partitions by mounting them with the discard flag. If it is the case, that my partitions are not properly aligned, what could I do to fix this without having to reinstall everything?

  Read the article

• Can't install Ubuntu 13.10 from 12.04 lts

  - by Matt Carle

  I have ubuntu 12.04 lts installed on my hp pavilion and I want to try 13.10. When I try to boot into the livecd, I get the purple ubuntu splash screen, then a blackscreen where some text flashes (to fast to see what it says) then it goes to a black screen and stays there. I know the installation disc is not the problem because I've successfully installed it on a different machine using the same disc. I've been trying to troubleshoot the issue for a while now and no luck. I have a radeon hd 8250 card. I know it's not much to go off of but any help would be greatly appreciated! Thanks!

  Read the article

• How to automount usb drive reliably without fstab

  - by user103279

  Hi I need a way to mount a usb drive without using fstab. I Cannot use fstab because the drive is not connected to my computer at boot. This causes an issue during any one off reboots because start up hang waiting for this device until a keyboard intervention to skip it. I cannot use my current script with just does mount /dev/sde1 /media/Backup because sometimes it changes to sdf. Consider this a server install. I can't use tools at the user or GUI level. I suppose the sum of my question is how to manually mount a usb drive from the commandline considering the reliability of the /dev/sd value isn't consistent. Thanks,

  Read the article

• Installed nvidia graphics driver (current, 8800GTX) has issues, how do I disable/uninstall it?

  - by Craig

  I installed the restricted nvidia graphics driver (current) on my computer, then restarted to finish the install. Upon reboot I got some prompt about there being an X server problem, It told me to try auto-fixing or something, none of its options worked, they all failed horribly and caused the computer to crash immediately on selecting any of them. I decided to re-install. Again I got in, downloaded updates, and installed the driver. This time upon boot the X-server immediately crashes and im brought to tty1. If I hit ctrl+alt+F7 I see a beige-background prompt says the usual about checking battery state, pulse audio etc., you see right before the x-server starts. According to X (if I do sudo startx) there are no displays, and the nvidia graphics driver is not working. First off, how do I set ubuntu back to the default driver (I have only a CLI right now -.-), then how do I install a more appropriate nvidia driver

  Read the article

• How to select which account is logged in at system startup, or none?

  - by hippietrail

  I'm helping out some friends with a tiny hospitality business where one desktop computer has some files used by the business in one account "hotel" but it's mostly used by guests for browsing the web in another account "guest". It's low security, we're not worried about hacking or anything. But we don't want people accidentally moving our files or anything either. But the system always boots into the "hotel" account without asking for a password, even though the account has a password. We want it to boot into the "guest" account. I know a bit about computers generally and Linux but not much about Ubuntu and the ever-changing graphical environment the Linuxes are going through these days. We've looked through the obvious settings/preferences/options and I've done some Googling. I know this should be obvious easy stuff but I can't find it. (We're running 10.04 LTS on a generic aging Intel box.)

  Read the article

• Windows 7 with Ubuntu Problems HP

  - by Brian

  I have a HP e9300z, Have Windows 7 on it currently. x64 bit. I wish to Dual Boot Ubuntu with Windows 7, when i do the windows setup , do not even get the options to Install Alongside with, Just install or Something else. Someone in another forum said something with the HP BIOS, can not find where to change anything. So what do i have to do so Ubuntu sees my HDD with Windows? Manually make partition? Only have 1 partition my C: Windows. Thanks.

  Read the article

• How to Use The US Windows 8 Store From Another Country

  - by Taylor Gibb

  Have you ever searched for an app only to find that its not available in your country? Luckily for us there is a work around for the Windows Store. How to use the US Windows Store from Another Country Press the Win + X keyboard combination, or right click in the bottom left hand corner of your screen to open the WinX menu, then launch the Control Panel. Now change the Control Panel’s view to the Small icons view. Then head into the Region settings. When the Region settings open you will need to switch over to the Location tab. Here you will be able to see the location that the Windows Store, as well as other applications , is using. You can change it by simply selecting United States from the drop down. That’s all there is to it. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• How to re-partition?

  - by EDi

  I switched from Windows to Ubuntu 4 months ago and I am really happy with it. I set up a dual-boot system (since I wasn´t sure how it will end up with me and Ubuntu). After merging from Citavi to Zotero I need windows only for my scanner. The problem I have now is, that the windows partion is so big with lots of unused space and the ubuntu partition are quite small - I should have though about this problem 4 months ago... My partitions look like this: Where sda3 is the windows partition, sda5 is Ubuntu and sda7 is a data partition. I want to shrink sda3 and free some space for sda5 and sda3. How can this be done safely (and easily)?

  Read the article

• Ubuntu VM cannot start after Kernel upgrade

  - by AAz

  Several Ubuntu 10.04 VMs were restarted after few months and began getting "Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" message. Restoring those VMs from backup (to the "paused" state) allows to boot normally. However restarting the VM again results in the mentioned error message. I suspect it's the updated kernel version (2.6.32-37-server, 2.6.32-38-server) that misbehave - another Ubuntu VM (that's used as template for those failing VMs) still has 2.6.32-24-server and reboots fine. We're using HyperV (2008R2) as the server host. Nothing were changed in it's configuration. Has anyone faced this issue, please advise the solution. Many Thanks in advance!

  Read the article

• Problems booting Ubuntu 10.10 with Nvdia GeForce 6600gt

  - by SlyrNemesis

  I am quite new to Ubuntu and I already stumbled upon a problem. I run Ubuntu 10.10 Maverick Meerkat now and Install went fine, when trying to boot the screen popped black and I faced this message "gpu lockup - switching to software fbcon." When setting the display to onboard VGA through BIOS Ubuntu has no problem at all, but when I switch back to my AGP card (which is a Nvidia GeForce 6600GT) I get that message again. I do not use VGA for that card I use my DVI cable for it. Does anyone have an answer for me to make this work? Thank you

  Read the article

• Iomega Home Media Network Hard Drive 1TB Cloud Edition failed, data recovery?

  - by lonbon69

  I have a Iomega Home Media Network Drive Cloud Edition 1TB that started clicking and then displayed a failure LED code Power LED and Red LED. I removed the SATA drive and inserted in a 'All in 1 HDD Docking Station' and connected to laptop by USB - Laptop has Win 7 OS. The dock is seen as drive E but cannot access and says 0% data etc. The drive does spin up when I power the dock. Web searches say the drive has EXT3 file system and to use Ubuntu to access drive. I have now setup a dual boot laptop but still do not see the drive using ubuntu. Is there something else I need to do to get it recognised etc. I really would like to recover the data, any suggestions please?

  Read the article

• Install Ubuntu on iMac 21.5" (mid 2011)

  - by Mystic Mark le Maverick

  I has a dual boot system with MacOSX 10.8.2 and Microsoft Windows 7 Home Premium x64. I would like to install Ubuntu alongside the two existing operating systems for cross platform development purposes. My System specs are listed below. iMac 21.5-inch (mid 2011) Intel Core i7 @2.80GHz AMD Radeon HD 6770M Facetime HD Internet Camera Thunderbolt port Wireless Airport adapter card Apple 8x Superdrive Apple Magic Mouse and wired keyboard with numeric keypad Will rEFIt install properly on my machine too? Thanks you very much for the help.

  Read the article

• Core i7 with 4GB - go 64 bit or stay 32bit..?

  - by tommed

  I have a Core i7 laptop with 4gb ram. In windows, the disadvantage of using the 32bit OS would be that a single app could not use more than 2gb of ram (+ the 2gb shared kernel-space memory) except when setting a boot switch which reduces the amount of shared kernel memory, then it's 3GB max per app. What disadvantages/limitations would I have in Ubuntu for sticking to the 32bit OS? (If any?) - As I only have 4GB of ram, I can't see why I need to use the 64bit version?

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >