Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 275/1359 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

  • Do I need to uninstall lxde before installing kde-standard?

    - by A Roy
    I have ubuntu 12.04 (upgraded from 10.04) and since I disliked the default desktop, I installed lxde (sudo apt-get install lxde). This was good except that occasionally there would be trouble with Firefox (blinking on panel) so that finally I had to close it and then a error message from Ubuntu was issued. I had asked about it before but there was no useful response so now I want to move to another desktop which will hopefully not create the problem I have now. My doubt is, should I first uninstall lxde and then install kde (sudo apt-get install kde-standard) or is it enough to install kde without uninstalling lxde? In case it is necessary to uninstall, should I use the command sudo apt-get remove lxde or is there a better command for it? You may also help me with choice of desktop. I installed lxde since this is simple and lightweight. I am assuming that kde will not be as simple but hopefully not create problem like above. But I hate if it takes too long to log in or to launch a program like Firefox etc and also there should not be icons fixed on the left part of terminal (I hate to keep icons on desktop since these are distracting). Some of these issues were present with default Ubuntu 12.04. So is my choice of kde-standard appropriate or are there better desktop alternatives?

    Read the article

  • Opening cursor files in a graphics editor?

    - by sdaau
    I'm looking at /usr/share/icons/DMZ-White/cursors, and there is: $ tree -s /usr/share/icons/DMZ-White/ /usr/share/icons/DMZ-White/ +-- [ 4096] cursors ¦   +-- [ 14] 00008160000006810000408080010102 -> v_double_arrow ... ¦   +-- [ 5] 9d800788f1b08800ae810202380a0822 -> hand2 ¦   +-- [ 8] arrow -> left_ptr ¦   +-- [ 15776] bd_double_arrow ¦   +-- [ 15776] bottom_left_corner ¦   +-- [ 15776] bottom_right_corner ¦   +-- [ 15776] bottom_side ... ... a bunch of files without extension, that GIMP cannot open. Is there an editor where these files can be opened - or at least a converter to something like .png? I can note that ImageMagick display also failed to open these files... Found also Gursor Maker - Cursor Editor for X11/GTK+; got the CVS code from SourceForge - it still uses Numeric (the old name of numpy), so to run it, you'll have to do: #from Numeric import * from numpy import * ... in xcurio.py, curxp.py, gimp.py, colorfunc.py - and comment the #from xml.dom.ext.reader import Sax2 in lsproj.py. With that, I got it running 11.04: ... but cannot get any files to open? So I thought I should grep for paths, nothing much came up - and when I looked into cursordefs.py, I simply had to paste this: CURSOR_ICON = gtk.gdk.pixbuf_new_from_xpm_data([ "10 16 3 1", " c None", ". c #000000", "+ c #FFFFFF", ".. ", ".+. ", ".++. ", ".+++. ", ".++++. ", ".+++++. ", ".++++++. ", ".+++++++. ", ".++++++++.", ".+++++....", ".++.++. ", ".+. .++. ", ".. .++. ", " .++. ", " .++. ", " .. "]) Heh :) In any case, doesn't look like it will be much usable on newer Ubuntus, unfortunately... Just tested XMC plugin as well - on 11.04, has to be built from source (from the link in the accepted answer); the requirements on my system resolved to: sudo apt-get install libgimp2.0-dev libglib2.0-0-dbg libglib2.0-0-refdbg libglib2.0-cil-dev libgtk2.0-0-dbg libgtk2.0-cil-dev ... after that, the configure/make procedure in the INSTALL file works. Note that this plugin is a bit "sneaky": ... that is, you should use "All files" (as there are no extensions); cursor previews at first will not be rendered. Then open one cursor file; after it has been opened, then there is a preview in the File/Open dialog; but other than that, it works fine...

    Read the article

  • Record 8 separate Line IN Channels from M-Audio Delta 1010 Card

    - by Peter Hoffmann
    I want to record the 8 separate Line IN Channels from my M-Audio Delta 1010 Card. The card is recogniced nicely and a can record a single channel via arecord -d 10 -f cd -t wav -D channel1 out2.wav. I've set up the different channels in ~/.asoundrc. Now if I want to record a second channel in parallel (arecord -d 10 -f cd -t wav -D channel2 out2.wav) I get the error arecord: main:564: audio open error: Device or resource busy As I understand the delta 1010 is a single Access Card, so only one application can access it at a time. Is this correct? The next step was to configure a dual channel input in .asoundrc # envy24 channel 1+2 only pcm.test { type plug ttable.0.0 1 ttable.0.1 1 slave.pcm ice1712 } Which works ok when I do a arecord -d 10 -f cd -t wav -D test -c 2 out.wav (BTW can anyone point me to a tool to split a multi channel wav into a file per channel?) But when I want to record the channels separately with (-I option) arecord -d 10 -f cd -t wav -D test -c 2 -I channel1.wav channel2.wav I get no recordings. Did I miss something with the configuration or what are my options to record all 8 channels via arecord. I've no experience with jackd. Is it an option to install jackd and record the line ins via jackd?

    Read the article

  • fix vmware workstation 9 installation in ubuntu 12.10

    - by Alessandro Belloni
    i have opened this thread because i upgraded to ubuntu 12.10 beta (kernel 3.5) and i have problem with vmware workstation 9: "Unable to change virtual machine power state: Cannot find a valid peer process to connect to" does anyone got the same problem? Clean install of ubuntu 12.10 (daily build) installed vmware 9 and patched but not working, my laptop is a Lenovo T420 with Nvidia Optimus Technology. i can't patch correctly and get the thinks be builded correctly, my configuration is ubuntu 12.10 fresh installation vmware workstation 9 fresh install on top of a lenovo thikpad t420 with nvidia optimus video card. have a problems.. this message is show whem i try to apply the patch.. # Stopping VMware services: VMware Authentication Daemon done At least one instance of VMware VMX is still running. Please stop all running instances of VMware VMX first. VMware Authentication Daemon done Unable to stop services # How can i stop the vmware services to apply the patch? This message is too show when i try to patch again # ./patch-modules_3.5.0.sh /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting # But the vmware is not working, and i can’t unstall…

    Read the article

  • Nautilus bookmarks and smb shares work with non-root user

    - by Enrique
    I'm having a problem with Nautilus in Ubuntu 10.10 When I open Nautilus as common user, it shows bookmarks and the bookmarks that point to smb windows shares work fine. However, if I start Nautilus as root, it does not show bookmarks, and if I try to browse a smb share directly (by pressing Ctrl+L and inserting an address like smb://[email protected]/backups/) it doesn't work and gives me an error that it couldn't be found.

    Read the article

  • Ubuntu 14.04 Nvidia Optimus Bumblebee error

    - by Cristian
    I know that in Ubuntu 14.04 there exists nvidia-prime for Nvidia Optimus, but I don't like it and neither am I able to get it work. After upgrading from Ubuntu 12.04 everything crashed, and I made a clean install of Ubuntu 14.04 and Bumblebee, but now I have new troubles. After running optirun glxgears I get the following error: **[ 4703.996785] [ERROR]Cannot access secondary GPU, secondary X is not active.** **[ 4703.996910] [ERROR]Aborting because fallback start is disabled.** Please help.

    Read the article

  • How do I enable the "Universe" repository from the command line?

    - by Kangarooo
    How do you use terminal to enable Universe source? Or any those 4 from Software Sources: Main, Universe, Restricted, Multiverse Main is on by default and Restricted is on if durring Ubuntu installation i tick Enable Restricted Formats. Answer with line where version checked so it auto detects it. Like command I know for partner but that goes to Other Software tab sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner"

    Read the article

  • Sound issues after trying everything

    - by Lerp
    I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

    Read the article

  • How to install an older version of Java

    - by Alex Spurling
    I updated my installation of the sun-java6-jdk package today to version 6.24-1build0.10.10.1 after being prompted by the update manager. However this now causes some compilation failures so I'd like to revert back to the previous version that I had installed. I've tried using Synaptic but the 'Force Version' menu command is disabled. I've tried the following command to install the previous version sudo apt-get install sun-java6-jdk=6.22-0ubuntu1~10.10 But I'm not sure that I have the correct version: Reading package lists... Done Building dependency tree Reading state information... Done E: Version ‘6.22-0ubuntu1~10.10’ for ‘sun-java6-jdk’ was not found I've taken this version number from this changelog: https://launchpad.net/ubuntu/+source/sun-java6/+changelog Is this the correct way to install a previous version of a package? Have I got the correct version from the sun-java6 change log?

    Read the article

  • Executing a C program stored on a windows drive?

    - by bijay prakash singh
    I wrote a simple hello world program but not stored it in Ubuntu's home directory, instead I stored it on one of the Windows drives. (I am using Ubuntu 12.04 alongside of Windows.) When I compiled the program it worked just fine but when I tried to execute it I got an error message "Permission denied". And When I store the program in Ubuntu's home directory I can perfectly compile and execute the program. So please tell me how to overcome this problem??

    Read the article

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Error installing Copy.com client

    - by jimirings
    I'm trying to install copy.com's client on Ubuntu 13.10 but when I do, I get the following error message: Gtk-Message: Failed to load module "canberra-gtk-module" (CopyAgent:4430): LIBDBUSMENU-GTK-CRITICAL **: watch_submenu: assertion 'GTK_IS_MENU_SHELL(menu)' failed From there, it initially appears that the Copy client installs correctly. I am prompted to login and their icon shows up in the task bar. However, sync does not work properly. Items placed in my Copy folder on other devices (or through the web interface) sometimes download to this machine, and sometimes don't. I have investigated the first error message and found this solution, that I should insall the libcanberra-gtk-module. But when trying to install it, it is already installed. Just to be sure, I reinstalled it but it seems to have had no effect. I attempted to investigate the second error message and found that lots of different programs give similar error messages, but all of the solutions I could find seemed to be specific to the program that was under discussion on that particular thread. Any thoughts on how I could solve this? Or at least what I can try next?

    Read the article

  • Set up grub2 on cloned Ubuntu installation

    - by ptikobj
    With an Ubuntu Live Disc, I have copied my Ubuntu 10.04 installation to a new harddisk (with the same hardware). However, it doesn't boot, since I think I still need to set up grub for this new installation. How do I set up grub2 for a copied Ubuntu installation? All the tutorials for grub2 didn't really help me... running update-grub on the "original" Ubuntu installation doesn't find the copied Ubuntu installation.

    Read the article

  • Is it possible to add registry entries to the wine registry and make illustrator work?

    - by Prasad
    I haven't done this kind of work before but I really need Adobe Illustrator to get work on ubuntu! I don't care if it is cs3 or 4. I have installed CS3 and 4 master collection on windows and with wine on ubuntu can't run it (yes, no registry entries added to the wine!) I can copy all the needed file to the /home/prasad/.wine/dosdevices/C: directory with hidden files included, but how to add registry entries to them? (windows registry editor like thing to wine) is it possible to make illustrator run in ubuntu like that, i tried to install Master collection but it failed number of times. I use ubuntu 10.10

    Read the article

  • What is needed for a networked home printer?

    - by Jay
    I've seen this question: Home network printer recommendations but I think I'm asking something more basic. I'm not really familiar with networked printers or how they work or what they do really. What I'd like is to have a printer that is accessible to anyone connected to my home network, without having to plug into the printer itself. An alternative setup might to be to have a printer that is always hooked up to one computer, like a desktop, that is almost always on and allows other computers connected on the network to print to it as well. I believe the first option is called a networked printer and the second is printer sharing. But again I'm new to this so I don't really know the details or if I'm using the correct terminology. I was wondering if someone might be able to shed some light on this and let me know what is needed for either of these setup. Thanks.

    Read the article

  • How do I install GMSH?

    - by Steph Bredenhann
    I am trying to install Gmsh in 12.04 x64: xxx@sjb-linux:/320/installslinux/gmsh$ sudo apt-get install gmsh Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gmsh : Depends: libmed1 (>= 3.0.3) but it is not going to be installed E: Unable to correct problems, you have held broken packages. xxx@sjb-linux:/320/installslinux/gmsh$ I have now tried all the advice I could get sudo apt-get -f install sudo apt-get clean with no success, these commands report absolutely no problem. I'll appreciate help.

    Read the article

  • Why do I have man pages of commands that don't exist?

    - by Robert Vila
    What is panel-test-applets for?? I don't know. But if I want to know I type: $ whatis panel-test-applets The answer is: panel-test-applets (1) - display installed applets I have the man page too, and I can read it: $ man panel-test-applets But there is no program with that name. Maybe the command is not very useful, but is its man page more useful? Does someone know how to install that program or what is its man page for when you cannot execute the program? I can't even execute the command: $ panel-test-applets nor $ panel-test-applets --help which is the only thing its man page talks about!!

    Read the article

  • ubuntu 13.04 - wireless settings help

    - by James Ellis
    Im having problems connecting my wifi in Ubuntu 13.04 So i was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe i put in the wrong data or maybe not enough Would that make it work?? I just dont know how to find out some of the data you need to put in or if im putting the wrong stuff in??? Im new and its confusing. does anyone know the solution?

    Read the article

  • Ubuntu Software Center not recognising my network connection

    - by Chethan S.
    I have installed Oneiric Beta on my laptop. As my Mobile Broadband refused to connect to Internet through network manager I'm now using wvdial to connect. Hence the network manager shows I'm not connected to any networks. When I try to install software from Ubuntu Software Center the 'Install' option remains disabled and under reviews section it says no network connection! As a workaround I kept installing applications from terminal which works fine. Therefore, my question is how to make Software Center recognize that I am connected to Internet?

    Read the article

  • file acess slow after deletion of many files

    - by stefan
    I recently accidentally created millions of files in one folder (rougly 5 million) and due to limitations I couldn't process them correctly (maximum argument count exceeded for wc / ls and such stuff). So I deleted them, which took quite a while, but now they're gone. I deleted the files with a regular rm. It weren't any system files. So the files are definitively deleted, but the system is very slow on file stuff now. ls, cat and auto-complete by pressing tab freezes the terminal for several seconds. Is this some sort of fragmentation issue? Is it an issue with the files beeing still somehow present?

    Read the article

  • Can't boot Ubuntu 12.10 32 or 64 Bit, only Ubuntu 12.04 32 Bit [closed]

    - by Alexander
    Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? i tried to install Ubuntu 12.04 64Bit, 12.10 32 and 64Bit, but it doesn't work. I'm used the Ubuntu 12.04 32Bit Start Disc Creator and also Unetboot on Win7, the installation-process are finished and i restart without the Stick. I can choose for example 12.10 and it starts writing "start ... [OK], ...", but then it hangs most on "Stop Kernel Messages [OK]". Then i can only shutdown normal the system and it writes stopping, shutdown and something like that. I am use an Aspire One D270 Netbook with Intel Atom N2600. It also doesn't work to try Ubuntu 12.10 from running on USB Stick. It starts, but then its black and the cursor blink on the left upside. Please can you help me? :(

    Read the article

  • Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

    - by Mikl
    My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

    Read the article

  • firefox raided?

    - by dschinn1001
    ubuntu 12.10 with firefox 17.0 firefox is now suddenly not starting any more ? (since I tried something with virtualbox and win7 firefox seems to be raided somehow ? - then after next boot virtualbox with win7 did not work any more and had message like here: Premature end of data in tag VirtualBox line 8. Location: '/home/$user/VirtualBox VMs/V12/V12.vbox', line 86 (8), column 2. /home/vbox/vbox-4.2.4/src/VBox/Main/src-server/MachineImpl.cpp[724] (nsresult Machine::registeredInit()). Fehlercode: NS_ERROR_FAILURE (0x80004005) Komponente: Machine Interface: IMachine {22781af3-1c96-4126-9edf-67a020e0e858} ) this happened all - after win7 made an update and virtual hard-disk with size of normally 25 Gibi exceeded to 26.8 Gibi I plugged (when I created virtualbox with win7) usb-hard-disk with 500 Gibi, but somehow win7 was not installed on disk with 500 Gibi - instead only virtual-harddisk with default 25 Gibi was created - and smaller harddisk with maximum of 120 Gibi was restless stuffed out. This created then the problem with "raided" firefox and firefox cannot start any more. After I delelted virtualbox with win7 - there are 12 Gibi free space back on the smaller harddisk - but firefox remains after reboot out-of-function and does not start.

    Read the article

  • There is no two finger scroll option in my "Mouse and Touchpad" settings

    - by Ian
    I simply do not have the option for "two-finger scrolling" available in my "Mouse and Touchpad" settings. I have tried a lot of terminal commands that I have found in the forums with no success. Who has a solution that will enable two-finger scrolling? A little about me: Ubuntu 12.04.1 LTS \n \l Built-in Pointing Device Type: Mouse Interface: PS/2 Buttons: 2 ~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Synaptics TouchPad id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? WebCam SC-13HDL10931N id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=14 [slave keyboard (3)] Screenshot of system settings:

    Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >