Search Results

Search found 27239 results on 1090 pages for 'microsoft extension frame'.

Page 275/1090 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• No Internet connectivity to linux container on Debian

  - by kirankumar

  I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

  Read the article

• uiscrollview not switching image subviews

  - by nickthedude

  I'm building a comic viewer app, that consists of two view controllers, the root viewcontroller basically displays a view where a user decides what comic they want to read by pressing a button. The second viewController actually displays the comic as a uiscrollview with a toolbar and a title at the top. So the problem I am having is that the comic image panels themselves are not changing from whatever the first comic you go to if you select another comic after viewing the first one. The way I set it up, and I admit it's not exactly mvc, so please don't hate, anyway the way I set it up is each comic uiscrollview consists of x number of jpg images where each comic set's image names have a common prefix and then a number like 'funny1.jpg', 'funny2.jpg', 'funny3.jpg' and 'soda1.jpg', 'soda2.jpg', 'soda3.jpg', etc... so when a user selects a comic to view in the root controller it makes a call to the delegate and sets ivars on instances of the comicviewcontroller that belongs to the delegate (mainDelegate.comicViewController.property) I set the number of panels in that comic, the comic name for the title label, and the image prefix. The number of images changes(or at least the number that you can scroll through), and the title changes but for some reason the images are the same ones as whatever comic you clicked on initially. I'm basing this whole app off of the 'scrolling' code sample from apple. I thought if I added a viewWillAppear:(BOOL) animated call to the comicViewController everytime the user clicked the button that would fix it but it didn't, after all that is where the scrollview is laid out. Anyway here is some code from each of the two controllers: RootController: -(IBAction) launchComic2{ AppDelegate *mainDelegate = [(AppDelegate *) [UIApplication sharedApplication] delegate]; mainDelegate.myViewController.comicPageCount = 3; mainDelegate.myViewController.comicTitle.text = @"\"Death by ETOH\""; mainDelegate.myViewController.comicImagePrefix = @"etoh"; [mainDelegate.myViewController viewWillAppear:YES]; [mainDelegate.window addSubview: mainDelegate.myViewController.view]; comicViewController: -(void) viewWillAppear:(BOOL)animated { self.view.backgroundColor = [UIColor viewFlipsideBackgroundColor]; // 1. setup the scrollview for multiple images and add it to the view controller // // note: the following can be done in Interface Builder, but we show this in code for clarity [scrollView1 setBackgroundColor:[UIColor whiteColor]]; [scrollView1 setCanCancelContentTouches:NO]; scrollView1.indicatorStyle = UIScrollViewIndicatorStyleWhite; scrollView1.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview scrollView1.scrollEnabled = YES; // pagingEnabled property default is NO, if set the scroller will stop or snap at each photo // if you want free-flowing scroll, don't set this property. scrollView1.pagingEnabled = YES; // load all the images from our bundle and add them to the scroll view NSUInteger i; for (i = 1; i <= self.comicPageCount; i++) { NSString *imageName = [NSString stringWithFormat:@"%@%d.jpg", self.comicImagePrefix, i]; NSLog(@"%@%d.jpg", self.comicImagePrefix, i); UIImage *image = [UIImage imageNamed:imageName]; UIImageView *imageView = [[UIImageView alloc] initWithImage:image]; // setup each frame to a default height and width, it will be properly placed when we call "updateScrollList" CGRect rect = imageView.frame; rect.size.height = kScrollObjHeight; rect.size.width = kScrollObjWidth; imageView.frame = rect; imageView.tag = i; // tag our images for later use when we place them in serial fashion [scrollView1 addSubview:imageView]; [imageView release]; } [self layoutScrollImages]; // now place the photos in serial layout within the scrollview } - (void)layoutScrollImages { UIImageView *view = nil; NSArray *subviews = [scrollView1 subviews]; // reposition all image subviews in a horizontal serial fashion CGFloat curXLoc = 0; for (view in subviews) { if ([view isKindOfClass:[UIImageView class]] && view.tag 0) { CGRect frame = view.frame; frame.origin = CGPointMake(curXLoc, 0); view.frame = frame; curXLoc += (kScrollObjWidth); } } // set the content size so it can be scrollable [scrollView1 setContentSize:CGSizeMake((self.comicPageCount * kScrollObjWidth), [scrollView1 bounds].size.height)]; } Any help would be appreciated on this. Nick

  Read the article

• How to remove all views in region in CompositeWPF/Silverlight

  - by Dan

  Hi. I want remove all views from my region in Composite. I'm using Silverlight 4.0. And unfortunately, this code crashes with OutOfRangeException inside Composite. List<object> views = new List<object>(_regionManager.Regions["NavigationRegion"].Views); foreach (object view in views) { _regionManager.Regions["NavigationRegion"].Remove(view); } This is my callstack: [External Code] Microsoft.Practices.Composite.Presentation!Microsoft.Practices.Composite.Presentation.Regions.ViewsCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs e = {System.Collections.Specialized.NotifyCollectionChangedEventArgs}) Line 102 + 0x24 bytes C# Microsoft.Practices.Composite.Presentation!Microsoft.Practices.Composite.Presentation.Regions.ViewsCollection.RemoveAndNotify(System.Collections.IList items = Count = 1) Line 45 + 0x2b bytes C# Microsoft.Practices.Composite.Presentation!Microsoft.Practices.Composite.Presentation.Regions.ViewsCollection.UnderlyingCollection_CollectionChanged(object sender = Count = 0, System.Collections.Specialized.NotifyCollectionChangedEventArgs e = {System.Collections.Specialized.NotifyCollectionChangedEventArgs}) Line 153 + 0xb bytes C# [External Code] Microsoft.Practices.Composite.Presentation!Microsoft.Practices.Composite.Presentation.Regions.Region.Remove(object view = {Kite.MyApp.SlUI.NavigationRegion.NavigationRegionView}) Line 230 + 0x1b bytes C# MyApp.SlUI!Kite.MyApp.SlUI.Components.ViewController.linksRegion_LanguageChanged(object sender = {Kite.MyApp.SlUI.Controls.LinksUserControl}, Kite.MyApp.SlUI.Common.EventArgs<string> e = {Kite.MyApp.SlUI.Common.EventArgs<string>}) Line 77 + 0x2d bytes C# MyApp.SlUI!Kite.MyApp.SlUI.Controls.LinksUserControl.OnLanguageChanged(string newLanguage = "en-GB") Line 37 + 0x32 bytes C# MyApp.SlUI!Kite.MyApp.SlUI.Controls.LinksUserControl.ComboBox_SelectionChanged(object sender = {System.Windows.Controls.ComboBox}, System.Windows.Controls.SelectionChangedEventArgs e = {System.Windows.Controls.SelectionChangedEventArgs}) Line 31 + 0xb bytes C# [External Code] What did I wrong? Hoping for you help :). Thank you.

  Read the article

• Powerpoint template image placeholders can't send to back

  - by Marcus

  We want to be able to set up a PowerPoint 2007 template with a picture frame image. We then want to insert an image in normal view which would appear behind the picture frame image that was put in the template (so it looks logically like a picture in a picture frame). Problem is, when we insert the image in normal view it always appears on top of the picture frame image. It appears that you can't send to back when the other elements are included in a template. Any ideas?

  Read the article

• How to install non Microsoft USB device driver on PC without admin rights?

  - by Ron

  I am running Win 7x32 secured corporate laptop. My USB audio device has .exe installer file which is not possible to execute because of having no admin rights. Is it possible to embed driver files in the system without installation? All attempts of unpacking the .exe file got failed. 7zip is extracting files without extensions and Universal Extractor says that .exe file is 7zip self extracting archive. Thank you Ron

  Read the article

• Upgrading VSTO project to .net 4 - What references do I actually need?

  - by Dana

  I'm developing an application for Office. It originally targeted .net 3.5, but I decided to upgrade to .net 4 because of some WPF issues that I've run into. When I switched all the projects in my solution and rebuilt, I got an error saying to include System.Xaml. I did that and rebuilt, and VS2010 told me to include another reference, so I did. This happened a couple more times, and finally it asked me to include Microsoft.Office.Tools.Common.v9.0, and when I did I got this error: Microsoft.Office.Tools.CustomTaskPaneCollection exists in both Microsoft.Office.Tools.Common.v9.0.dll and Microsoft.Office.Tools.Common.dll I have both Microsoft.Office.Tools.Common.v9.0 and Microsoft.Office.Tools.Common referenced in my project, but the problem is that if I remove either, I get an error. Am I doing something wrong? Is it odd that I would need both references? I find it strange that CustomTaskPaneCollection would be defined in two different binaries. If I remove Microsoft.Office.Tools.Common, the error that I get is "Cannot find the interop type that matches the embedded interop type 'Microsoft.Office.Tools.IAddInExtension'. Are you missing an assembly reference?"

  Read the article

• Convert video to apng/png?

  - by acidzombie24

  I tried to do this with ffmpeg but failed (i also failled making animated gifs). Is there a simple to use free program (command line is ok) to convert videos to animated pngs? As long as it doesnt dump the video frame by frame into png files and create a monster size png then i should like it.(I didnt see an option to make ffmpeg not dump every frame) From the wiki http://en.wikipedia.org/wiki/APNG

  Read the article

• Is there a simple way to backup and restore all Microsoft SQL Server database objects related to a p

  - by Nathan Hartley

  I would like to backup, not only the databases that belong to a particular application living on a shared server, but also, those things that get stored outside of the database; the server accounts, jobs, maintenance plans and whatever else I can't think of at the moment. This backup should be complete enough that it's corresponding restore will recreate the entire application on a different SQL server. This seems like a problem others must have dealt with in the past. So before I embark on creating custom Powershell scripts for each application, I have come to ask you... Can you help?

  Read the article

• How to add a footer to a table in Microsoft Word?

  - by dewalla

  I have a table that is longer than one page. I have found the option to make the header of the table to be added to the second portion of the table after the page break. Is there a way to do the same thing but with a footer on the table? I want to add a footer so that if my table was 1000 entries long (12 pages), that the first and last row of each page would be consistant; a header and footer for the table. If I edit the rest of the document (above the table) the table will shift up/down and I want to header and footer of the table to remain at the pagge breaks. Any Ideas? PAGE BREAK HEADER OF TABLE TBL TBL TBL TBL TBL TBL TBL TBL TBL TBL TBL TBL FOOTER OF TABLE PAGE BREAK HEADER OF TABLE TBL TBL TBL TBL TBL TBL FOOTER OF TABLE TEXTTEXTETEXT PAGE BREAK

  Read the article

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• RTNETLINK answers: Invalid argument

  - by LinuxPenseur

  Hi, When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

  Read the article

• Is there a way to get iTerm + Bash usability on Microsoft Windows?

  - by J. Pablo Fernández

  I've been using Bash for years and I really like iTerm. Is there a way to get that level of console usability for Micosoft's Windows cmd? By that I mean the sane tab completion, history (even if you close the terminal), searching back and so on, and also a terminal I can resize, with tabs, nice fonts, etc.

  Read the article

• iphone application ad-hoc installation on windows gives invalid certificate error

  - by Lorenzo Boccaccia

  I've an application that need to be deployed to some testers. those with windows machine are reporting that the certificate used for signing the application couldn't be installed because of an unknown critical extension (1.2.840.113635.100.6.1.4) is there a way to make that critical extension known to windows (vista 64bit specifically)? I'm guessing that all this system of extension give user the ability to register callbacks to interpret the various added extensions (it would be totally useless otherwise)

  Read the article

• Microsoft Forefront Management Gateway 2010 - Which topology to choose for monitoring only server?

  - by MadBoy

  Hello, I've installed Forefront and wanted to use it as monitoring traffic solution until we decide to put it as a router. I've 2 nic's assigned to this virtual machine. One NIC has connected port which is "mirror port" of our WAN redirected on switch so it sees all the network traffic flying by. The other NIC is internet access. This server is located inside our lan network. What topology should i choose and which options I should look at to be able to see which traffic is used (SMTP, WWW etc) and who does what? We had cases of infected machines with spam and we want to be able to see that some machine is sending large amounts of mails. Is that possible ?

  Read the article

• Why does Microsoft Windows' performance appear to degrade over time?

  - by Ben Aston

  Windows XP/2k3 and earlier (can't attest to Vista, but suspect it's the same) all appear to become more sluggish over time as applications are installed and uninstalled. This is not a scientifically tested observation, but more of a learned-through-experience piece of wisdom. (I've always suspected the registry as being behind the issue.) Does anyone have any concrete evidence of this degradation occurring, or it just an invalid perception of mine?

  Read the article

• How to make Microsoft Keyboard special keys run osascript commands on OSX?

  - by t-a-w

  I'm trying to make (1) special key open new terminal window. I bound it to file /Users/taw/bin/new_term, which contains: #!/bin/sh exec osascript -e 'tell application "Terminal" to do script "cd ."' This does the trick, except it also opens a Terminal window with this (even though Terminal.app is configured to always close windows when processes finish): Last login: Thu Mar 11 19:41:29 on ttys000 /Users/taw/bin/new_term ; exit; ~$ /Users/taw/bin/new_term ; exit; tab 1 logout [Process completed] How do I make it all work correctly? (possibly using a way different that what I've been attempting so far)

  Read the article

• How do I run multiple instances of Microsoft Outlook 2010, each with a specific profile?

  - by Matt

  I have 2 mail profiles - one profile has a single Exchange 2010 account and the other has a single IMAP account. I want to open an instance of Outlook for each. I execute outlook.exe /profile MyExchangeProfile for the Exchange profile and outlook.exe /profile MyIMAPProfile for the IMAP profile and the result is that I get 2 instances of Outlook each with the MyExchangeProfile. In fact, whichever profile I load first is always the one that gets loaded no matter what profile I specify on separate executions.

  Read the article

• Escaping query strings with wget --mirror

  - by Jeremy Banks

  I'm using wget --mirror --html-extension --convert-links to mirror a site, but I end up with lots of filenames in the format post.php?id=#.html. When I try to view these in a browser it fails, because the browser ignores the query string when loading the file. Is there any way to replace the ? character in the filenames with something else? The answer of --restrict-file-names=windows worked correctly. In conjunction with the flags --convert-links and --adjust-extension/-E (formerly named --html-extension, which also works but is deprecated) it produces a mirror that behaves as expected. wget --mirror --adjust-extension --convert-links --restrict-file-names=windows http://www.example

  Read the article

• How do I set zone priority in Microsoft DNS?

  - by Justin

  I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

  Read the article

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• Can i use microsoft ajax tab controls SKIN only ?

  - by Anil Namde

  I like YUI's Tab, to use its look and feel for own tab like implementation we just have to include yui tabs CSS and use markups and css classes and done. example below, <link rel="stylesheet" type="text/css" href="http://yui.yahooapis.com/2.8.0r4/build/tabview/assets/skins/sam/tabview.css" /> <ul class="yui-nav"> <li><a href="#tab1"><em>Tab One Label</em></a></li> <li class="selected"><a href="#tab2"><em>Tab Two Label</em></a></li> <li><a href="#tab3"><em>Tab Three Label</em></a></li> </ul> Now i have a site where Microsort's tab tab controls are used and there are some which are old simple tabs. Now i would like to change these old tabs to Microsoft tab structures just by using CSS if possible as we have done above for YUI. Is that possible to do that using CSS/file? How it can be done for Microsofts tab?

  Read the article

• wxPthon problems with Wrapping StaticText

  - by Scott B

  Hello. I am having an issue with wxPython. A simplified version of the code is posted below (white space, comments, etc removed to reduce size - but the general format to my program is kept roughly the same). When I run the script, the static text correctly wraps as it should, but the other items in the panel do not move down (they act as if the statictext is only one line and thus not everything is visible). If I manually resize the window/frame, even just a tiny amount, everything gets corrected and displays as it is should. I took screen shots to show this behavior, but I just created this account and thus don't have the required 10 reputation points to be allowed to post pictures. Why does it not display correctly to begin with? I've tried all sorts of combination's of GetParent().Refresh() or Update() and GetTopLevelParent().Update() or Refresh(). I've tried everything I can think of but cannot get it to display correctly without manually resizing the frame/window. Once re-sized, it works exactly as I want it to. Information: Windows XP Python 2.5.2 wxPython 2.8.11.0 (msw-unicode) Any suggestions? Thanks! Code: #! /usr/bin/python import wx class StaticWrapText(wx.PyControl): def __init__(self, parent, id=wx.ID_ANY, label='', pos=wx.DefaultPosition, size=wx.DefaultSize, style=wx.NO_BORDER, validator=wx.DefaultValidator, name='StaticWrapText'): wx.PyControl.__init__(self, parent, id, pos, size, style, validator, name) self.statictext = wx.StaticText(self, wx.ID_ANY, label, style=style) self.wraplabel = label #self.wrap() def wrap(self): self.Freeze() self.statictext.SetLabel(self.wraplabel) self.statictext.Wrap(self.GetSize().width) self.Thaw() def DoGetBestSize(self): self.wrap() #print self.statictext.GetSize() self.SetSize(self.statictext.GetSize()) return self.GetSize() class TestPanel(wx.Panel): def __init__(self, *args, **kwargs): # Init the base class wx.Panel.__init__(self, *args, **kwargs) self.createControls() def createControls(self): # --- Panel2 ------------------------------------------------------------- self.Panel2 = wx.Panel(self, -1) msg1 = 'Below is a List of Files to be Processed' staticBox = wx.StaticBox(self.Panel2, label=msg1) Panel2_box1_v1 = wx.StaticBoxSizer(staticBox, wx.VERTICAL) Panel2_box2_h1 = wx.BoxSizer(wx.HORIZONTAL) Panel2_box3_v1 = wx.BoxSizer(wx.VERTICAL) self.wxL_Inputs = wx.ListBox(self.Panel2, wx.ID_ANY, style=wx.LB_EXTENDED) sz = dict(size=(120,-1)) wxB_AddFile = wx.Button(self.Panel2, label='Add File', **sz) wxB_DeleteFile = wx.Button(self.Panel2, label='Delete Selected', **sz) wxB_ClearFiles = wx.Button(self.Panel2, label='Clear All', **sz) Panel2_box3_v1.Add(wxB_AddFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_DeleteFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_ClearFiles, 0, wx.TOP, 0) Panel2_box2_h1.Add(self.wxL_Inputs, 1, wx.ALL|wx.EXPAND, 2) Panel2_box2_h1.Add(Panel2_box3_v1, 0, wx.ALL|wx.EXPAND, 2) msg = 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' staticMsg = StaticWrapText(self.Panel2, label=msg) Panel2_box1_v1.Add(staticMsg, 0, wx.ALL|wx.EXPAND, 2) Panel2_box1_v1.Add(Panel2_box2_h1, 1, wx.ALL|wx.EXPAND, 0) self.Panel2.SetSizer(Panel2_box1_v1) # --- Combine Everything ------------------------------------------------- final_vbox = wx.BoxSizer(wx.VERTICAL) final_vbox.Add(self.Panel2, 1, wx.ALL|wx.EXPAND, 2) self.SetSizerAndFit(final_vbox) class TestFrame(wx.Frame): def __init__(self, *args, **kwargs): # Init the base class wx.Frame.__init__(self, *args, **kwargs) panel = TestPanel(self) self.SetClientSize(wx.Size(500,500)) self.Center() class wxFileCleanupApp(wx.App): def __init__(self, *args, **kwargs): # Init the base class wx.App.__init__(self, *args, **kwargs) def OnInit(self): # Create the frame, center it, and show it frame = TestFrame(None, title='Test Frame') frame.Show() return True if __name__ == '__main__': app = wxFileCleanupApp() app.MainLoop() EDIT: See my post below for a solution that works!

  Read the article

• Windows 7 just corrupted Microsoft F# and now won't fix itself.

  - by user225626

  I lost half a year's worth of custom CGAL/GMP/LEDA/Qt3/Qt4/MPFR/MPFI/Visual Studio/Boost/blahblahblah open source nonsense with DLLs that are scattered in various parts of the OS that I had gotten to finally work. All because F#, which came with .NET 4 and which I never, ever used, is now "corrupted" one day for reasons only Windows 7 knows, and now Windows 7 won't even boot. Of course none--none--of the above setup works as accessed from the USB port. How do I remove a corrupted file that prevents a Windows 7 from booting, or even being fixed by an external CD mount of the Windows 7? Thanks for any help.

  Read the article

• How do I automatically run nightly backups for Microsoft SQL Server 2005?

  - by cowgod

  I don't see any built in mechanism for scheduling nightly backups in SQL Server 2005. What tools are available to perform this task and how reliable are they?

  Read the article

• How to get Microsoft Security Essentials to work through a proxy?

  - by Simon

  It only seems to work for me with a direct connect. And i cant find anywhere to set a proxy. Windows 7 64bit.

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >