Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 275/626 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• php server settings for restrict post queries

  - by Korjavin Ivan

  I have php script on hosting, which receive big data with ajax/post. Just now, after some works on hosting, I see that script is broken. I checked with curl: file temp1: user_avatar=&user_baner=&user_sig=.... 237 chars total, and curl -H "X-Requested-With: XMLHttpRequest" -X POST --data @temp1 'http://host/mypage.php' works perfect. But with file temp2: name=%D0%9C%D0%B5%D0%B1%%B5%D0%BB%D1%8C%D0%A4%%B0%D0%B1%D1%80%D0%B8%D0%BA%D1%8A&user_payed=0000-00-00&...positions%5B5231%5D=on total chars: 65563 curl -H "X-Requested-With: XMLHttpRequest" -X POST --data @temp2 'http://host/mypage.php' curl return nothing. Looks like a problem with apache/php/php.ini or something like that. I check .htaccess php_value post_max_size 20M Which other parameters I should check? Is it possible that %BO encode kill php/apache? Or total number of parameters (about 2800) ?

  Read the article

• "No route to host" with ssl but not with telnet

  - by Clemens Bergmann

  I have a strange problem with connecting to a https site from one of my servers. When I type: telnet puppet 8140 I am presented with a standard telnet console and can talk to the Server as always: Connected to athena.hidden.tld. Escape character is '^]'. GET / HTTP/1.1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1> <p>Your browser sent a request that this server could not understand.<br /> Reason: You're speaking plain HTTP to an SSL-enabled server port.<br /> Instead use the HTTPS scheme to access this URL, please.<br /> <blockquote>Hint: <a href="https://athena.hidden.tld:8140/"><b>https://athena.hidden.tld:8140/</b></a></blockquote></p> <hr> <address>Apache/2.2.16 (Debian) Server at athena.hidden.tld Port 8140</address> </body></html> Connection closed by foreign host. But when I try to connect to the same host and port with ssl: openssl s_client -connect puppet:8140 It is not working connect: No route to host connect:errno=113 I am confused. At first it sounded like a firewall problem but this could not be, could it? Because this would also prevent the telnet connection. As Firewall I am using ferm on both servers. The systems are debian squeeze vm-boxes. [edit 1] Even when I try to connect directly with the IP address: openssl s_client -connect 198.51.100.1:8140 #address exchanged connect: No route to host connect:errno=113 Bringing down the firewalls on both hosts with service ferm stop is also not helping. But when I do openssl s_client -connect localhost:8140 on the server machine it is connecting fine. [edit 2] if I connect to the IP with telnet it also is not working. telnet 198.51.100.1 8140 Trying 198.51.100.1... telnet: Unable to connect to remote host: No route to host The confusion might come from IPv6. I have IPv6 on all my hosts. It seems that telnet uses IPv6 by default and this works. For example: telnet -6 puppet 8140 works but telnet -4 puppet 8140 does not work. So there seems to be a problem with the IPv4 route. openssl seems to only (or by default) use IPv4 and therefore fails but telnet uses IPv6 and succeeds.

  Read the article

• NMap route determination on Windows 7 x64

  - by user30772

  C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

  Read the article

• Two Tomcat SSL Providers & One FreeBSD

  - by mosg

  Hello everyone. Question: On FreeBSD8 I need to have two opened HTTPS different ports (443 and 444, for example). In other words, I need two providers, working simultaneously: Ordinary SSL signed certificate (# Thawte) on 443 port Special russian security provider (# DIGTProvider, based on CryptoPro CSP software) on 444 port I also have to mentioned, that the major provider is the 2'nd provider. Here is some of DIGTProvider options: add to ${JRE_HOME}/lib/security/java.security this line security.provider.N=com.digt.trusted.jce.provider.DIGTProvider ssl.SocketFactory.provider=com.digt.trusted.jsse.provider.DigtSocketFactory uncomment and edit in conf/server.xml HTTPS section: sslProtocol="GostTLS" (added) edit bin/catalina.sh and add: export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:/opt/cprocsp/lib/ia32" export JAVA_OPTS="${JAVA_OPTS} -Dcom.digt.trusted.jsse.server.certFile=/home//server-gost.cer -Dcom.digt.trusted.jsse.server.keyPasswd=11111111" As I know if I just define in server.xml tomcat's configuration file two SSL connectors, tomcat would not start, because in JRE you can use only one JSSE provider. Thanks for help.

  Read the article

• Telnet works from desktop but not Server

  - by Joe Estes

  Sending mail via smtp.gmail.com is failing on my server. I looked on some forums and people were saying to make sure you can telnet to the smtp address first. When I telnet from my server i input this and get this error: [root@localhost ~]# telnet smtp.gmail.com 465 telnet: smtp.gmail.com: Temporary failure in name resolution smtp.gmail.com: Host name lookup failure From my OS X desktop I do the same and get this: Macintosh-3:~ joe$ telnet smtp.gmail.com 465 Trying 74.125.127.109... Connected to gmail-smtp-msa.l.google.com. I'm running a fedora core 9 server with a firestarter firewall. I have turned off the firewall and the same error persists. I'm also using port forwarding from my router to this server. I have allowed forwarding for port 465 on my router as well. Can someone please help. Thanks, Joe

  Read the article

• Mount TMPFS instead of ro /dev

  - by schiggn

  I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

  Read the article

• Tomcat and IIS6 on one server, multiple websites

  - by Rafe

  Windows Server 2003 with IIS6 and Tomcat 6.0.26. Three sites running on this server. One is PHP, one is ASP and the third uses Tomcat. The first two work flawlessly. The third is being a pain. Tomcat is installed and if called on the server itself by IP address xxx.xxx.xxx.xxx:8080 shows the welcome page. Calling the same address from an external machine gives a 'could not connect' error. Calling the ip address from within the server on standard port 80 gives me an error 324 (net::ERR_EMPTY_RESPONSE). Have tried using httpcfg to force listening only on ports within the ip range I'm using in a manner similar to question 35650 located here on serverfault but with no success. There are actually ten ip addresses on this machine but I'm only using three of them at this point. Any pointers on troubleshooting this would be appreciated!

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• CPU Temperature required for auto-shutdown.

  - by ULTRA_POROV

  At what temperature do most motherboards/cpus power down to prevent damage? And what determines this? Is it the bios, the motherboard, the cpu itself? I have a cpu that stays on in the bios until about 105 C and then shuts down. I am not sure if this is correct? Maybe the sensors are wrong. I think 105 is a bit high. I guess 80-90 would be more reasonable for an auto shutdown.

  Read the article

• SOHO NETGEAR wireless router disconnects when downloading torrents

  - by Lirik

  I have a NETGEAR WGT624 wireless router at home which dies when there is a heavy torrent load. I open up my torrent client and it downloads for about 5 to 10 minutes and it continues to increase the number of seeds (goes up to 70-80 seeds), but after that the router simply fails and I have to restart it in order to get an internet connection again. When I connect directly via an ethernet cable the router and open up the torrent client, then it seems to be doing fine, but when I go wireless then the router stops working properly (although all the lights are still blinking as normal). Is there any way that I can fix this? New router firmware? Change some router options? Feed it a cookie? Anything?

  Read the article

• Xen 4.2 on CentOs 6.3 : can't compile a libvirt 0.9.10 xen-activated?

  - by Frederic

  I followed that tutorial for Xen 4.2 on CentOs 6.3. http://www.howtoforge.com/virtualization-with-xen-on-centos-6.3-x86_64-paravirtualization-and-hardware-virtualization When building a new libvirt package with rpmbuild -bb libvirt.spec I get that error : CC libvirt_driver_libxl_la-libxl_conf.lo In file included from libxl/libxl_conf.c:43: libxl/libxl_conf.h:61: error: field 'ctx' has incomplete type libxl/libxl_conf.h:80: error: field 'ctx' has incomplete type libxl/libxl_conf.h:81: error: expected specifier-qualifier-list before 'libxl_waiter' libxl/libxl_conf.c: In function 'libxlMakeDomCreateInfo': libxl/libxl_conf.c:365: warning: implicit declaration of function 'libxl_init_create_info' [-Wimplicit-function-declaration] libxl/libxl_conf.c:365: warning: nested extern declaration of 'libxl_init_create_info' [-Wnested-externs] libxl/libxl_conf.c:367: error: 'libxl_domain_create_info' has no member named 'hvm' libxl/libxl_conf.c:383: warning: implicit declaration of function 'libxl_domain_create_info_destroy' [-Wimplicit-function-declaration] libxl/libxl_conf.c:383: warning: nested extern declaration of 'libxl_domain_create_info_destroy' [-Wnested-externs] libxl/libxl_conf.c: In function 'libxlMakeDomBuildInfo': libxl/libxl_conf.c:406: warning: implicit declaration of function 'libxl_init_build_info' [-Wimplicit-function-declaration] libxl/libxl_conf.c:406: warning: nested extern declaration of 'libxl_init_build_info' [-Wnested-externs] libxl/libxl_conf.c:408: error: 'libxl_domain_build_info' has no member named 'hvm' [...] Do you know what I need to install or change to pass that step?

  Read the article

• AD LDS High availability

  - by user792974

  We are currently using CAS for multiple directory authentication. AD for internal users, AD LDS for external users. I've read that NLB is a possible solution, but wondering if this is possible with SRV records, and how about you would correctly configure that. With our AD directory, I can bind with olddomain.local, and hit any of the DCs in the domain. We don't want to hardcode servernames into CAS, so the end goal is to bind with LDSdomain.gov. nslookup -type=srv _ldap._tcp.LDSdomain.gov returns _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 100 port = 1025 svr hostname = server01 _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 200 port = 1025 svr hostname = server02

  Read the article

• Setting up dante socks server

  - by skerit

  I want to tunnel all my internet traffic through my vps, so I'm trying to install a proxy server. However: I can't seem to browse the internet through Dante. I get the ERR_EMPTY_RESPONSE error. This is my config: logoutput: stderr /home/user/dantelog internal: eth1 port=1080 external: eth1 method: username pam user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } Do I really have to run 2 proxy servers: one for http and one for socks? or is there something else I can do?

  Read the article

• How can I stop my laptop display from flickering when I connect my TV?

  - by Lord Torgamus

  I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

  Read the article

• Very low throughput on 10GbE network

  - by aix

  I have two Linux machines, each equipped with a Solarflare SFN5122F 10GbE NIC. The two NICs are connected together with an SFP+ Direct Attach cable. I am using netperf to measure TCP throughput between the two machines. On one box, I run: netserver and on the other: netperf -t TCP_STREAM -H 192.168.x.x -- -m 32768 I get: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.x.x (192.168.x.x) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 32768 10.02 1321.34 The measured throughput is 1.3Gb/s. This is 7.5x below the theoretical maximum, and only 30% faster than 1GbE. What steps can I take to troubleshoot this?

  Read the article

• How to access website on localhost from internet?

  - by Nitesh Panchal

  Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

  Read the article

• Firebox Edge 11 and SBS 2008 VPN produces error 721

  - by Charlie Bear

  My VPN has stopped working. I have sbs 2008 and have run the VPN wizard. I have opened the port 1723 on my firebox edge as it instructed me to do. It was working but I think that an upgrade of the firebox software to version 11 has affected it. The port is still open. When connecting I get to verifying username and password then I get Error 721. Not sure whats wrong here. can anyone help?

  Read the article

• 7-zip for linux

  - by flybywire

  7-zip for linux, does such a thing exist? I mean actually 7-zip or a port, not another compression tool or command

  Read the article

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• Setting up nginx as proxy to apache; All good, but nginx doesn't serve media

  - by becomingGuru

  I have set it up such that nginx proxies request and sends django requests to apache and serves media itself. Following documents my setup: Nginx Configuration: /etc/nginx/nginx.conf user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/sites-enabled/*; } ===== ngnix proxy /etc/nginx/proxy.conf ============ proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; =========== Nginx server file: /etc/nginx/sites-enabled/some-name.txt ========== server { listen 208.109.252.110:80; server_name netconf; autoindex on; access_log /home/site/server_logs/nginx_access.log; error_log /home/site/server_logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:80/; include /etc/nginx/proxy.conf; } location /site_media/ { root /home/site/folder/static; } } ========== Nginx very well proxies the request and passes to apache, the required requests, but doesn't serve the media. In the last server file, location site_media is not served, at all. :( Everything seems perfect to me. What is wrong? Thanks in advance.

  Read the article

• BT socket Device over Structured Cabling

  - by TheD

  Not sure if this is the right stack* site to post on but I believe cabling is a just subject. Essentially I have a Credit Card machine which is connected to a phone line via standard BT Socket. So basically, the port of the wall has a balun plugged in which takes the RJ45 outlet on the wall to BT, so I can plug the device in. This works fine, however I need the machine to be on the other side of the room so want to route it through my patch panel (strucutered cabling). How can this be done? So Device -- ? -- RJ45 port -- Patch Panel -- ? -- Balun out wall outlet Where ? is to be filled in ! :)

  Read the article

• What is the best way to prove a processor is overheating / running too hot?

  - by Cheesegraterr

  Hello all! recently I noticed that my sister's laptop was getting very very hot when it sat on my lap, she had also complained that it just turned off on her without warning... so I decided to run Coretemp and Everest to test processor temperature.(It is an AMD Athlon X2... not sure what it runs at.) It seemed to idle around 75-80 Celsius and under 100% load it peaked at 115 ! I realize that laptops run a lot hotter than desktop but I think that is ridiculously hot...am I right? Anyway... Her laptop is still under warranty and I was wondering what is the best way to prove to future shop that it is running that hot. Should I give them a printout of a stress test or something like that? Or should I just bring it in to them and tell them what I think is wrong and let them test it. Thanks for the help!

  Read the article

• How to block own rpcap traffic where tshark is running?

  - by Pankaj Goyal

  Platform :- Fedora 13 32-bit machine RemoteMachine$ ./rpcapd -n ClientMachine$ tshark -w "filename" -i "any interface name" As soon as capture starts without any capture filter, thousands of packets get captured. Rpcapd binds to 2002 port by default and while establishing the connection it sends a randomly chosen port number to the client for further communication. Both client and server machines exchange tcp packets through randomly chosen ports. So, I cannot even specify the capture filter to block this rpcap related tcp traffic. Wireshark & tshark for Windows have an option "Do not capture own Rpcap Traffic" in Remote Settings in Edit Interface Dialog box. But there is no such option in tshark for linux. It will be also better if anyone can tell me how wireshark blocks rpcap traffic....

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >