Search Results

Search found 9462 results on 379 pages for 'three tier'.

Page 275/379 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

  • Booting Windows from different partition than system

    - by szamil
    I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

    Read the article

  • SBS 2008 - DNS Forwarders timing out.

    - by Moif Murphy
    Hello, We have an SBS 2008 server that keeps losing connection to the internet approx 2-3 times a day. It's a simple setup, BT Business Broadband ADSL to a Wireless Zyxel router to the server. Clients connect via WiFi from their laptops. Plugging ethernet in makes no difference, only a reboot of the router seems to bring everything back again. I'm looking at the forwarders on the DNS properties page and they're timing out when trying to resolve the IPs. Currently there are two IPs in there, 194.72.9.34 which has timed out and 194.72.9.38 which has finally resolved to ns8.bt.net We've been in there and replaced all media, installed a PCI NIC, have changed the router three times. There are no errors in the DNS event logs pertaining to what's going on. We've also been on to BT who are adamant that it's not their end. Could someone shed some light on what could be going on or where else to look in the configuration of the server? Thank you.

    Read the article

  • AT&T Filtering FTP traffic?

    - by xpda
    Using an AT&T DSL, I cannot ftp upload or ftp download a few files of a large 1500 set. The problem is the file name. I can change a few characters of the file name, and they upload fine. I can change the file names from upper to lower case and they upload fine. If I change back to the original file name, it will not upload again. When it doesn't upload, it starts, transfers about 5% of a 5-10 meg file, and then times out. I have uploaded one of the files under a different name, changed the name back to the original, and it will not download via ftp. It will download onto a browser, and it will ftp download just fine with a different name. It just will not download with ftp. I have reproduced this uploading to three different servers on 1and1 and Amazon EC2. When I try it on a non-AT&T ISP client, it works OK. Here is a file that did not upload until I had renamed it. (I have changed it back to the original name): "http://xpda.com/nautnew/11302 STOVER POINT TO PORT BROWNSVILLE SIDE A.png" This problem is unrelated to connection, speed, and file content. Only things I can see that makes a difference are the file name and ATT DSL. Does ATT have some kind of ftp file filtering? Is there anything else that could cause this behavior?

    Read the article

  • Centralized backup method recommendation for SMEs with various OSes

    - by Akinator
    Hi I was wondering what in your opinion is the "best" method for having "everything" backed-up in the following situation. We are a SMEs with 10 computers in total. Three of those computers are MACs The rest are windows (1 vista, 4 win7 and 2 XPs) I'm very open to what the method should be but you should also consider the follwing: Very limited resources Quite "small" bandwidth (4 MBs for all (download) 0.4 MBs (upload, yep, thats it)- though this might get, a little bit better) One of the main thing to back up would be the mails, considerations: All windows computers use outlook, mainly 2003 There is one mac that uses outlook too (for mac of course - not 2011 yet) We also have to backup the files: Not a huge amount Very few very big files Very organizes (by machine) What I would like is to hear your opinions as to which would be the best method (or combination of methods - preferably one of course) considering. We are not sure what do we need and I'm open to suggestions, though an online (cloud based applications) would be great, remember the the bandwidth is unbearable. Last think to consider, it that we would like to do weekly updates (unless the method is very easy of course). Thanks in advance!! I tried to be as specific as possible, but if anything is needed I'll gladly update, please ask for any clarification needed! Please avoid any answers like upgrade all to windows 7 and throw away your macs :) our's may not be an ideal situation, but it is what it is, and right now, it would be impossible for us to change it for a lot of circumstances.

    Read the article

  • 64-bit Windows 7 gets stuck on logo screen on bootup

    - by Richard B
    I've had a PC running Windows 7 in my office which I'm not using at the moment (cause I'm working elsewhere as a consultant atm), I'm only accessing the PC using Team Viewer (http://www.teamviewer.com/) which means the PC has been running for quite some time now. I've restarted it maybe twice a week though. A few days ago I couldn't access it using Team Viewer and when I got to the office the screen was black with only the mouse pointer showing. The PC has four hard disks, three of them (all 1Tb) is using RAID 5. This is what I've done so far: I reboot and everything seems to load correctly. I get to a screen that gives me two choices - boot Windows normally or perform a startup repair. Choosing to boot Windows only gets me to the Windows 7 logo screen which only animates over and over again. Choosing to repair gets me to the repair screen that "checks for problems" and then it gets stuck on the "Attempting repairs..."-screen (I let it run for about 24 hours before giving up). What is the next step to take? I don't have any backups and no system restore points saved. I can access files and folders through a terminal window using a Windows 7 DVD so I guess nothing is lost yet... Please help me, thanks!

    Read the article

  • Using Openfire for distributed XMPP-based video-chat

    - by Yitzhak
    I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

    Read the article

  • Reduce size of MP4

    - by testing
    I have a MP4 file with a lengh of 22:44. Here are the details: Video: width: 720 px height: 404 px data bitrate: 1022 kBit/s overall bitrate: 1182 kBit/s fps: 24 codec: H264 - MPEG4 AVC (part 10) (avc1) Audio: bitrate: 159 kBit/s stereo sample rate: 48 kHz codec: MPEG AAC Audio (mp4a) I thought I can reduce the current filesize (about 200 MB) by reducing the width and the height (420 x 236). I tried different programs: Handbrake, Format Factory, Next Video Converter and Super. The first three didn't worked as expected: Handbrake has a bug by setting the width and the height, the next two doesn't allow the fine setting of the videosize (only presets of width and height). Super seems to be the best, but I didn't found a setting which reduces the file size. I reduced the width and the height but only got 20 MB less. Now I tried the xth setting and I still get a too high file size. I want to reduce the filesize to 100 MB or less. The ouput format should be FLV or MP4, because I need this for flowplayer. Which settings of SUPER or which program should I use to reduce the file size? Of course the video should still be viewable.

    Read the article

  • Windows XP Freezes

    - by Jim Fell
    Hello. I'm running a machine with Windows XP Professional 64-bit. Every so often, it will freeze for no apparent reason. That is, everything stops responding, except the mouse. I can move the mouse around, but I can't click on anything. Keyboard input is also not accepted/received when this problem occurs. The three-finger salute fails to bring up the Task Manager. Even pressing the power button on my computer fails to shut it down. The only way out of this that I have found is to hard-reboot the machine (i.e. pull power or hold power button in for 10 seconds). This problem was occurring on the system when it had all its updates and after a fresh install when not everthing was quite yet updated. I've run the Scandisk utility and the latest version Memtest86 that supports 64-bit architecture; neither found any errors. The last time this happened was on a fresh install of Windows. Only Nero Essentials, Avast antivirus (disabled), Firefox, and Spybot were installed. I was not running Nero, Firefox, or Spybot at the time, and Avast was disabled, so I'm pretty certain this is a Windows issue. Is anybody familiar with this problem or have any pointers? Thanks.

    Read the article

  • Strange issue in header location redirect

    - by hd01
    I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

    Read the article

  • Is there any way to shut up my ATI HD 5770?

    - by slpsys
    So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

    Read the article

  • External HDD connecting via USB disconnects wireless LAN connection

    - by Kensai
    Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

    Read the article

  • Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

    - by xhyperx
    The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

    Read the article

  • Potential impact of large broadcast domains

    - by john
    I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

    Read the article

  • WINDOWS 7: Make the contents of two folders appear in one

    - by big_smile
    In Windows 7, I have three folders: "Images", "assets" and "all". I want the contents of "Images " and "assets" to appear in "all" automatically without copying those files into that folder (e.g. I don't want to duplicate the files). I also only want the contents to be copied over and not the folders themslves (The reason for this is that if the folders are copied over, they will become sub-directories. I am using a printing hot folder that access "all" but it can't see any subdirectories in "all"). When Images and Assets are updated (e.g. with files being added or deleted), "all" should automatically update as well. How can I do this? This is what I have tried: Libraries: This is a feature built into Windows. It works exactly as I want. However, the print hot folder cannot recognise the library as a folder. Sym Link Extension: I can use this to make the "images" and "assets" folders appear as a sub directories of "all". However, I want the contents of "images"/"assets" to appear in the "all" folder (I don't want the directories to appear as sub directories, because as stated, the print hot folder cannot access sub directories).

    Read the article

  • Moving an external hard drive while running

    - by user1108939
    I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

    Read the article

  • Need a helpful/managed VPS to help transition from shared hosting

    - by Xeoncross
    I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

    Read the article

  • Will Windows repair my multi-boot when I format the 1st physical partition with boot sector?

    - by user2353806
    Due to historical reasons I got a laptop with Vista, Windows 7 and Windows Server 2008R2 partitions. (boot from external wasn´t that viable) Nothing (Windows Repair, bootrec /whateveroption) worked when I restored only the Windows 7 and WS2k8 with Acronis TrueImage. Don´t ask me through what idiotic error messages I went during repair tries. (Wrong Windows version,...) So I grudgingly restored all three - with the little additional excursion that I thought changing the active partition to the Windows 7 partition would move the boot sector and let me format the Vista part... Oh no. Seems too logical for MS. (Dunno what I changed, but today it will let me format!) So the real question is: Will formatting the Vista part trash things again beyond comprehension or will Windows Repair bring back the boot rec and remove Vista from the boot options? Or should I just erase all the files to avoid trashing the boot? Where will the boot rec be (after repair) when I format the Vista? On 1st or 2nd partition? And if I get drunk and install Windows 8.1 on the 1st, will anything work? ;-) Thanks

    Read the article

  • Burning Linux ISO to DVD and making it bootable.

    - by toc777
    Hi everyone, I just downloaded the Fedora 14 Live-Desktop ISO and used CDBurnerXP to burn the image to a DVD. For some reason the first time I burned the image nothing showed up on the DVD when I accessed it even though CDBurnerXP said it had successfully burned to the disk. I did it again and the ISO shows up on the disk (I don't think this is right, should it be the files inside the image that show up on disk or the image file??). The problem now is my dell PC can't find the ISO when I try to boot from it. I get an error saying it can't boot from the CD. I have verified the ISO image as directed from the Fedora website. My question is how do I make a bootable CD from a Fedora Live-Desktop ISO? How can I verify that the ISO was written to the CD correctly and has anyone had any issues booting from a CD using a Dell desktop (I'm not at home at the moment so I can't check what model it is but its old enough, I've had it for about 5 years). EDIT: All that needed to be done was to burn the image to CD as an image and not a data file. The first three times failed, I'm not sure if this was because of faulty DVD's or if the write speed was too high (16x). I put in a new DVD and changed the write speed to 8x, the image was then properly burned to the disk without any errors. Thanks.

    Read the article

  • Users Password does not reset after successful login at the console but works fine with SSH

    - by jnbbender
    The title says it all. I have my unsuccessful login attempts set to three. I purposefully fail logging in 2x, then when I SSH into the box successfully the 3rd time my count drops back to zero; exactly what should happen. But at the console I get failed login attempts EVEN for my successful login attempts. I am using RHEL 5.6 and no I am not able to upgrade. Here is my system-auth file: auth required pam_env.so auth required pam_tally.so onerr=fail deny=3 per_user auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account required pam_tally.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password required pam_deny.so session optional pam_keyinit.co revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so I have tried adding reset after and in place of per_user in the auth required pam_tally.so field. Nothing seems to work and I don't know why SSH is working just fine. Any ideas?

    Read the article

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • Nagios escalation debugging

    - by Oesor
    I'm having some issues with escalations happening properly and I'm not sure if it's because of my config or because the nagios binary is nonstandard and something may be broken. I've got little experience with nagios, and just want to make sure this is being set appropriately. Should the following config file definition allow the escalations to take over and increment the notification interval as expected? Is there somewhere else in the config files I should be looking at to figure out what's going on? I've enabled debug 32 in the config and it's simply spitting out 'Host notification will NOT be escalated.' for each notification. The configuration does pass the pre flight check with no issues, and reports that it's parsing the three host escalations in the config. # test host definition define host { host_name test alias test address 10.0.0.10 hostgroups test check_interval 0 retry_interval 1 max_check_attempts 2 flap_detection_enabled 0 icon_image windows.png icon_image_alt LOGO - Windows vrml_image windows.png statusmap_image windows.png action_url /info/host/275 check_period 24x7 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master check_command check_host_15!-H $HOSTADDRESS$ -t 3 -w 500.0,80% -c 1000.0,100% parents nagios notifications_enabled 1 notification_interval 3 notification_period 24x7 notification_options u,d,r use host-global } define hostescalation{ host_name test first_notification 3 last_notification 4 notification_interval 10 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 4 last_notification 5 notification_interval 30 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 5 last_notification 0 notification_interval 240 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master }

    Read the article

  • Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

    - by xhyperx
    The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

    Read the article

  • My Hard Drive isn't Working

    - by MeCB
    I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

    Read the article

  • Show (copy) data at "X" time and stop update

    - by Anka
    I have two sheets. In the first sheet, cell F4, I have 00:00:00 (countdown). G9, G10 and G11 are cells that receive live data (decimal numbers). In the second sheet, I have three cells linked from sheet1, G9 ='Sheet1'!G9, G10 ='Sheet1'!G10, G11 ='Sheet1'!G11 (which update themselves when data is modified in the first sheet). Now I want to set in sheet 2, (assume) cells B9, B10 and B11 to show me (copy) the values from G9, G10 and G11 from sheet 1 when the countdown was 00:00:05 (5 seconds before Start) and not update again if the data changes in the cell it pulled the data from. Like G9 ='Sheet1'!G9 at 00:00:05 and stop here, do not update anything. OK? I can do a part, but the real problem is: I can not make it stop cells to update. Stand frozen, freeze, not move, calm .. however. I do not want to seem pretentious (but my knowledge in excel is limited), the most appropriate would be a formula, not macro or VBA, if possible. I want to post a picture but I can not because of my restrictions. Well, if this is not possible with a formula is just fine with (not really) VBA.

    Read the article

  • Windows 7 just deleted 4 days of work

    - by Mat
    Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

    Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >