Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 276/792 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• DIsable my nv video card driver in linux

  - by Dahaka Wang

  I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

  Read the article

• LXC Container Networking

  - by digitaladdictions

  I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

  Read the article

• How do I recover a RAID 1 volume on Mac OS X (10.7)?

  - by Avry

  I have a Synology NAS that I've set up with RAID 1. The device is set up with two drives, both the same size (i.e. 500 GB each), formatted in ext3, as a RAID 1 volume (i.e. even though the total capacity is 1TB, I effectively only get 500 GB). In the case of a device failure where I can only access one of the drives, how can I recover my data? The solution I'm looking for is something like: 'Put the working drive in an enclosure, and use <some software> to recover your data.'

  Read the article

• Private VOIP network

  - by SuppositoryPlacebo

  I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

  Read the article

• Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

  - by Code Sherpa

  Hi. I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• Wrong version of php used be IIS

  - by user1070125

  Long ago I installed php5.2 using a installer on IIS. Recently I installed PHP Manager and upgraded to php5.3 simly by unzipping the downloaded file and then used the "Register new php version" in PHP Manager. I did this for the global scope for all sites. This works OK. Once in a blue moon errors are written to the php5.2 errorlog even though that verion is not used anymore. The errors are typical 5.3 specfic functions that are not supported in 5.2. How can it be? Can I safely uninstall php5.2 using the uninstaller (i think it added some stuff to the env paths)?

  Read the article

• Hyper-V Virtual Disk Creation Taking Forver

  - by mnemosyn

  After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

  Read the article

• How to authorize standard users to install drivers

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: -Allow standard users to install drivers. -Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• Blackberry Won't Sync: Says Processing

  - by Noah

  I have a blackberry storm 2 and I have it set up to sync, just like I've done with all the other ones in the company. They pull the address book/contacts from outlook, and aren't synced to an exchange server. I have everything setup and then when I hit synchronize it flashes "processing" the phone shows it trying to sync and then it is done in less than a second. It did warn me that the computer was not supplying enough power to charge the device and it said that I should make sure the drivers are correct. Also, I was warned that the device might not function properly down in the bottom right hand corner. Any ideas? I've uninstalled and reinstalled the blackberry software off the disc.

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Audio switch with multiple 3.5mm input & outputs

  - by David Nguyen

  I've been searching for a device that simple allows me to pick one input and one output from multiple input/outputs. I thought this would be a called a switch but I can only find ones with one input. Is there such a device that can do this? I will be attaching various devices, i.e. multiple console sound, PC & Laptop inputs and outputting to my speakers or headphones. I'm looking for something small and simple. All inputs and outputs are 3.5mm.

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

• Connect Ralink RT2571 to new PC

  - by tuelsch

  I bought a new PC with the AsRock Z77 Extreme 4m motherboard, since this has no WLAN, I extracted the WLAN card from my old PC, a Ralink RT 2571 WF, an connected it to the new board. I downloaded the driver from http://www.ralinktech.com/en/04_support/support.php?sn=500 (the RT257x USB one) and installed it. In the device manager, an unknown device shows up, but if I tell it to search its driver, it does not find it (searching in the whole C partition). The Ralink Diagnostic Test says that the WLAN Card is disabled. I'm using Windows 7 64bit professional. Can anyone suggest me a solution to get my WLAN running?

  Read the article

• USB Hub powers down in sleep mode on Win 7 64

  - by Andy B

  This question has been asked before but not answered. I would like the USB hub to remain on in sleep so I can wake up the laptop from an external keyboard and mouse. I have set all the device drivers by unchecking allow this device to be powered down and disabled selective suspend in control panel but the hub still powers down. If I plug a keyboard or mouse directly in to the PC they remain powered and wake the computer its only when they are connected through the hub there is a problem. I have another PC running Win 7 32. If I set this up in exactly the same way the hub remains powered in sleep. Both PC's are Toshiba Satellites with multi-core celerons but one runs Win 7 32 the other Win 7 64. BIOS settings are the same. Any help would be appreciated even confirmation that this is a feature of Win 7 64.

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• Installing ethernet controller driver after clean windows XP install

  - by user1488804

  I've been having trouble getting internet access through an ethernet connection since doing a fresh install of windows XP. It appears that I'm missing the driver for the ethernet controller. Looking in 'device manager' under the network adapters section there's an apparently working '1394 Net Adaptor' but under unknown devices there's the question-marked ethernet controller, which I believe is what I want the driver for. I found an old cd that contains the driver for it (Realtek 8139 or some 81xx). There's no setup tool, but only 3 files (a .cat file, .inf file and .sys file). I've tried right-clicking on the .inf file and using 'install' and also tried just copying the .sys file into the system32/drivers folder but neither have got me anywhere after restarting. The ethernet controller is still listed in 'unknown devices'. EDIT: I've also tried updating the driver in the device manager, pointing it at the folder containing the driver, but this hasn't worked either. Any ideas? Thanks

  Read the article

• Adding a new automatic number sequence

  - by Paul

  We write test case documents. In these documents, each test case is numbered. E.g. Foobar-UI-1 to Foobar-UI-23 or Foobar-Device-1 to Foobar-Device-87 I'd like to autonumber these. I don't think I want just a new numbered list format, I want something like the list of figures - where figures (or test case) can be defined anywhere in the doc with other headings and paragraphs between them, and I can insert a "List of figures" table at the beginning. So how do I do "test cases" and a "list of test-cases" table in the same way as figures work out of the box?

  Read the article

• Portable Display doesn't work anymore

  - by RipCord

  My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

  Read the article

• Sennheiser PC360 Microphone Suddenly Stopped Working

  - by Michaelwm

  Just recently, my Sennheiser PC360's microphone stopped working. Yesterday Night, it was working 100% fine. Muting correctly, un-muting, volume boosting, etc. I woke up this morning, and got into a skype call (After not changing a single setting on my computer), and it wasn't working. I tried mumble, and it didn't work there either. After that, I checked my sound devices and found out it was plugged in, but not responding to my voice. I unplugged the headset, and it correctly showed that it was unplugged. So, a quick run-down: Sennheiser PC360 Headset suddenly stops working after a few hours of sleep. Software is up to date I can hear the mute sound when I raise and lower the microphone arm Windows Sound Device Manager shows that it is plugged in Unplugging the headset correctly shows it is unplugged Windows Sound Device Manager shows that the microphone isn't receiving any input

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• iPhone game center can't create sandbox account

  - by William Jockusch

  Whenever I try to create an account on the simulator or device, I get a message "game center account services are currently unavailable. Please try again later." Furthermore, I have never been able to sign in to the game center app on the simulator. Interestingly, if I reset my device with iTunes, I can then log in to the Game Center app with my regular apple id. But whenever if I log out, then try to create a sandbox account for an app I am developing, it always fails as described above. Any suggestions?

  Read the article

• Stereo Mix does not work

  - by rfw

  Stereo Mix no longer seems to work on my computer -- it did once, but now I am unable to receive any sort of audio from it. When trying to record it with programs such as Audacity, it reports that there is an error opening the sound device. Additionally, I can make no changes whatsoever to Stereo Mix, such as with regards to default format, where it simply reports Format not supported by device. I am sure that Stereo Mix had definitely worked in the past, so does anyone have any idea as to why Stereo Mix would suddenly break? (I have no applications taking exclusive control of Stereo Mix)

  Read the article

• What does directory permission 'S' mean? (not lower case, but in upper case)

  - by Howard Guo

  I downloaded Eclipse, uncompressed it, did a few other things and all sudden I notice this interesting behaviour: ^_^ ~/Downloads > sudo chmod 0000 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2000/d-----S---) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:07:49.354016510 +1100 Birth: - ^_^ ~/Downloads > sudo chmod 0755 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2755/drwxr-sr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:08:19.042016478 +1100 Birth: - What does 'S' permission mean to a directory? And why it doesn't let me get rid of it? Thanks.

  Read the article

• How can I connect a DVI monitor to the VGA port in my laptop?

  - by Corey

  Is there a device I can buy that will convert the analog signal to digital?

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >