Search Results

Search found 8473 results on 339 pages for 'vodoo boot'.

Page 276/339 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• Unreliable resume from suspend?

  - by dsimcha

  My desktop PC (home-built) resumes from suspend somewhat unreliably. I'd say that it resumes successfully about 85-90% of the time and hangs with a blank screen 5-10% of the time. As far as I can tell, the success or failure of the resume is completely random. I doubt it's a software problem because I triple boot Windows 7, Windows XP and Ubuntu and it's similar under all 3 operating systems. If it matters, my system is overclocked, though other than the resume-from-suspend issue, it's definitely rock stable. What are some of the obvious suspects that would cause random, sporadic failures to resume from suspend?

  Read the article

• Why am I unable to access the network shares on my own computer?

  - by DoomStone

  I am having some problems with media center computer, with Windows 7 on it. The computers IP address is 192.168.1.13, and another computer can without any problem navigate to \\192.168.1.13, but the computer itself can not. Neither \\servername nor \\localhost. If I reboot the computer a couple of times, it will work again, but this is a big problem as my computer cleans my media center library on boot and there, if it can not access \\192.168.1.13, it will think that all the files have been removed and therefore delete them from the database. I really have no idea on where to start with this problem, but if anyone has tried this before and fixed it, I would be very happy, as it would save me from having to reinstall the whole system.

  Read the article

• How to fix Asus Eee PC 900 startup issues after failure?

  - by EBrown

  My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

  Read the article

• New power supply, now computer doesn't recognise hard drive?

  - by Mike

  Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

  Read the article

• Recover partition table after DD command

  - by Shreedhar

  I executed the following command from a Ubuntu live cd terminal (dont ask why). dd if=/dev/zero of=/dev/sdb2 bs=512 count=1 Where sdb2 is a NTFS partition (third partition) on a disk. Suffice to say it is now messed up. When I boot into windows 7, it does show me E drive but when I click on it it asks me to format it. I am not ever sure what I did, did I mess up partition table or only the MFT? Is there any way to get the data back PLEASE HELP! this is very important :(

  Read the article

• Moved VM doesnt work correctly on my Ubuntu machine

  - by tinny

  Hi I have a Windows 7 VM that I have moved onto my Ubuntu 64bit host machine that is running VMware player 3.1.0. I think the VM was created on a Windows host. The problem I have is that when I login to this VM the screen goes blank and stays that way. The login screen is fine, but the desktop never correctly appears and sort of shows some strange pixelation that is all distorted. Seems like a virtual video card issue? If I boot into safe mode the desktop appears fine. Any ideas? Thanks

  Read the article

• Can software operation damage an SD card?

  - by Borek

  My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

  Read the article

• Win XP shut down window very slow to appear

  - by Heckmaier

  Hi all, I click Start-Shut Down and the Shut Down window takes 5 minutes to appear. This problem doesn't happen after a fresh boot, it only happens after I have been logged on for awhile. I am using a MacBookPro with Bootcamp. The machine actually shuts down quickly, its just really slow to bring up the shut down window. Basically I would like to know if: 1) Anyone has any ideas why this would happen 2) Who owns the "Shut Down" window (i.e. what happens on the OS after I click the Shut Down icon in the start menu) I've tried perusing the task manager to try and see if any processes look suspicious, but to no avail. thanks, H

  Read the article

• Windows 7 install crashes

  - by Alan Whitelaw

  I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

  Read the article

• Fastest booting Linux ditribution on a live-cd

  - by Avindra Goolcharan

  I'm looking for a linux distro with the following: Boots quickly, as fast as possible. Has expected tools such as file browser, a web browser, etc. Doesn't need to have extraneous recovery stuff such as partition editors, and what not. These are the tools I have and use already: ophcrack Ultimate Boot CD for Windows (UBCD4Win) chntpw (Offline NT Password and Registry Editor) Hiren's BootCD gparted or Parted Magic Ubuntu nubuntu Any and all suggestions are welcome :-) The primary objective is to get a quick booting linux distro that I can grab / delete / move / copy files with. Currently, I prefer using ophcrack, it boots in (relatively) fast and I can manipulate files well. The one that takes the longest is ubuntu of course.

  Read the article

• Bootable backup for Windows (7) - Like Super Duper for Mac

  - by Dan F.

  Just got an SSD installed on my notebook and as people suggested I want have my bases covered in case it fails and I expect it to fail. Here is what I have in mind... keep a partition on the main drive (HDD) the same size as the SSD and keep a "clone" there, and in case the SSD fails... I take the SSD out and boot from the clone partition. From my understanding SuperDuper! does just that for MacOS, but I don't seem to find a something similar. I've found a lot of great tools out there that enables you to make bootable images (CloneZilla, DriveImage XML, Acronis® True Image™ to name a few), that is not what I'm looking for.

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• DVD/CD-ROM drives stop working in Windows 7

  - by Marcus L

  All of a sudden Windows 7 (64 bit) lost all DVD and CD-ROM drives. It worked fine for about a month, then I don't know what happened. At first I thought it was a hardware problem - that my DVD-ROM had malfunctioned. But then I realized that Windows 7 no longer picked up on Demon Tools drives either. I can boot both Windows installation and Knoppix from the DVD-drive. So it seems to be a general problem with "disc-media". When trying to reinstall the hardware DVD-ROM Windows recognizes the drive (though sometimes simply label it as "CD-ROM drive"), but then says something went wrong - with from what I understand is a default error message (39), claiming the driver has become corrupt. I've tried every Microsoft recommended action, i.e. uninstall, reinstall, look for driver updates etc. etc., but with no luck. Any tip most welcome!

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• computer reboots randomly, can't find ssd

  - by John Barry

  My comp's been restarting at random times, and when it comes back the SSD drive can't be found by the BIOS and it doesn't boot. Powering down and starting up again fixes it 90% of the time, with a second reboot occasionally required. Does not seem to be heat related; it's never happened with me actually on the computer. It has happened while acting as the squeezebox server, however. It's a Sandy-Bridge i7 arch if that helps. To add: I've also run Windows Memtest and it came back with no issues.

  Read the article

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Delete Grub and OpenSuse but keep Windows 7.

  - by elvispt

  Hi. Here is my problem. I have OpenSuse installed alongside Windows 7. Grub is the boot loader from where I access OpenSuse and Windows 7. I want to delete Grub and also the OpenSuse partitions. My first, failed, approach was to insert the Win7 DVD, choose Repair your computer and then enter the commmand prompt. I then typed "bootrec /fixmbr" and restarted. It didn't worked. Grub was still there, so was Windows7. I then tried using "bootrec /fixboot and /rebuildbcd and neither worked. So what can I do to fix this? I remember when I was using WinXP this was much simpler. I would just type fixmbr and that was it. Any clues? Thank you.

  Read the article

• Linux Raid: Can mdadm --grow a raid1 while mounted?

  - by Chris

  I have 2 500gb drives in a RAID1 setup that I needed to upgrade for more space. I mdadm --fail'ed each drive in turn and I used dd to copy each drive to it's respective larger drive (2tb each), removed the smaller drives and replaced them with the larger drives, and reassembled the array and forced a resync. So now I've got a 500gb RAID1 sitting on 2TB drives, and wish to grow them. The plan is to use mdadm --manage /dev/md0 --grow to grow them, then boot a rescue cd, assemble the array under that environment, and do the resize2fs on them. Can I use mdadm --grow on a mounted and live filesystem? Also, do I need more options to make sure the grow operation stays raid1?

  Read the article

• Bootstrapped Ubuntu 12.04 EC2 instance. Where to find log?

  - by nocode

  So I bootstrapped a shell script to install and run a bunch of tasks. Looks like the it ran for the most part, but I added one part and that was formatting an extra EBS volume. Pretty straightforward: mkfs.ext4 /dev/xvdf mkdir –m 000 /vol01 echo “/dev/xvdf /vol01 auto noatime 0 0” | sudo tee –a /etc/fstab sudo mount /vol01 I was able to install MongoDB, NGINX and Forever. I selected to use /dev/xdvf in the AWS console and see it. The 3rd line is not in fstab either. I've searched through various logs in /var/log/ but I don't really see much indicating the execution of the bootstrap. Logs that I see and looked through: auth.log boot.log dmesg dpkg.log syslog udev

  Read the article

• Was Windows 95 an Operating System?

  - by shantnu

  This question maybe a bit historical, but we didn't have Superuser at the time. Around 2000 when I was starting my Computer science degree, a subject was Operating systems. The teacher asked us to list a few OS. I said Windows 95. I was immediately shot down. Windows 95 wasn't on OS, as it used DOS to boot up. The actual OS was DOS, Win 95 was just a graphical wrapper around it. I pointed that all trade magazines called Win95 an OS, but was told that they were run by laymen, and as a professional, I should know better. DOS was the only OS from Microsoft, at least till Win2K came out later that year. So 12 years on, I'm still not sure. Could Win 95 be considered an OS?

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >